Search results

Haying the field is a non starter. I have horses on it throughout the year. But I have to clip it to maintain quality. This IS NOT cattle grazing. I'm not trying to get maximal beef lb/ac. I'm trying to raise the fastest racehorses.

So I have 85ac and have spent several years moving it from a row crop desert (when purchased) to pastures. I have a 15' Woods BW which inevitably leaves heavy residual in the wheel marks, if I ever go longer than 2wks between mowings. And, being in KY, we get rain which prevents mowing at a time...

Its broken up into paddocks, except for 40ac which I put into hay/alfalfa/Timothy. I actually need to fence more for horses, but that won't alleviate the need to mow it. They can't keep up with the growth on their own. Its a good problem to have, I recognize this... I'm just trying to figure...

I took it out of row crops and I don't want it to go back. It was too hard to get good grass growing (although that is now the problem). I have been haying it, however, the weather has been hit and miss and I have excellent Timothy on 10ac which is still standing and gone well to seed. It breaks...

I'm really thinking something more like this setup, but leaving 8"

That's kind of what I'm thinking, but a flail mower rather than discbine. But all the large format flails I see are set at less than 4" cutting height... which is just way to short. I don't want less than 8".

I have 85ac horse farm put into grass and am having difficulty keeping it mowed regularly. What is the maximal height you can set a flail mower to cut? I'm sick of not having the time to mow my pastures, and the grass tends to grow pretty tall before I can get to it. I have a 15' Woods...

I have 3rd function valve on FEL for grapple. I use it on my FEL Auger for post holes. It works... but it is a slow turner. Probably 1/3-1/2 regular speed. If I had to use it often, I'd buy long hoses and attach it to my primary hydraulics on the back of my tractor, as it has significantly...

Wiring in from the side is fine. I just don’t want an overhead wire.

This isn’t just limited RPM, but sputtering and surging.

I have a barn and I'd like to build a small shed/garage close by, in which to store daily hay/straw as well as a a small addition in which to park a UTV (which I hope to buy this summer if all goes right.) My area has had several Kubota's stolen, so I'd like to have something to decrease this...

jd110, I have had codes for low fuel rail pressure before. They were addressed by changing out the filters. This is what I thought was going on this time, but new filters did nothing. The first tech (from a different shop) who came to look at it said there was nothing wrong, but only started...

I'm in Kentucky (Lexington area). OldTimer 66, the mobile tech changed out all sensors, one at a time and that did nothing. He then changed out the Low Pressure pump (nothing) then High pressure pump (still nothing). He checked the tank and screen and said it was clean. I'd changed out both...

I'm putting Plantra grow tubes around my trees, as I am working hard to ensure they have the best opportunity to make it. These aren't really for reforestation as much as for dedicated plantings for my pastures. Primarily along fences and roads. I bought row crop ground 4 years ago, and have...

My initial worry was more algae, but the mobile tech took out the tank filter and said it was completely clear. He spent several days on it, as it was really bothering him. He didn't charge me the full amount because he was flummoxed and couldn't get it fixed. My 'fear' is that I'll end up...

If I need, I will simply change out my short 3rd fnct connections and run long hoses to my rear remotes which have significantly more flow. I'm not concerned with the power to run a larger auger bit. In the last day or so, I have seen that there is an HTF labeled auger with an almost 2 stage...

I have a 5100e which I've owned 2nd hand since 400hrs or so. It is currently at about 1800hrs and I've used it hard in building my farm. I've kept up basic maintenance and its ran relatively well. Had a couple minor issues which required going to the shop. The biggest 2 were algae in the tank...

Put the stump IN the boat... take it to a safe spot, then dump it. Don't toss it and try to drag it. If you have a backhoe, put a piece of plywood across a boat corner, set the stump on it, carefully take the boat out to a deep spot, and push it off. If you feel the need, tie a couple rocks to...

While I have no desire to put in that many trees, I did just order 70 seedlings of various varieties. I have absolutely no desire to dig by hand. Obviously the seedlings wouldn't require as much digging, and my current 8" bit would address the hole, but I really liked the way the 18" bit cleared...

I currently have an FEL mounted Danuser hydraulic post hole digger. It works great, albeit a bit slow off my 3rd function system for grapple. I have an 8" post bit, but it is too small for trees. I've been looking around for a couple larger bits, hopefully used, and have seen a few at auctions...

I’ll check as I have one about 3 miles away. Thanks for the tip.

I want to build a run in shed, and have the basics in my mind. I know I can sit down, draw it out, make out a materials list, forget about 1/2 of the things I need, miss calculate some angle, length, height, or another, go back to the store and purchase more materials.... etc etc etc. BUT, I’m...

I would like to build a sprayer for my soon to be Kubota 1140. I know I can buy a premade one. I know I can buy a cheap off the shelf Tractor supply one. I actually have a 50gal already. I would like to build one in which the nurse tank never has chemical and there are several dedicated...

We have decided on a Kubota 1140 RTV, but my wife was asking about painting it. My reason for potentially changing the color is that it MIGHT have the potential to decrease the likelihood of it being stolen. An Orange Kubota is a dime a dozen around here, but a blue one with our farm logo on the...

I have been looking at UTVs for a while, never quite pulling the trigger. I am looking for a solid farm work vehicle, nothing flashy or trail riding worthy. I have landed on a Kubota 1140 and I致e been looking for a used one or waiting til this fall to get a new one. But in the process, I ran...

I ended up using 6 bags of “Crack resistant” fiber reinforced Quikrete. I actually made the slab size a little smaller but still large enough to have a 4” ledge around the waterer. All 6 bags were mixed in one of those ‘concrete tubs’ 3 qts of water to a bag. I purchased some Super-plasticizer...

I知 putting in a Mirafount waterer for horses. Everything is installed up tp forms which I値l be doing today. I致e never worked with concrete. I致e read about it relatively well and understand the basics I壇 guess. 6 slab around a 12 vertical pipe for water access. Slab is 51 x 40 x 6 with the...

I had a 2" PVC 'main line' pulled 30" deep from the MAIN county line through my property. They did a decent, not good, job but it took over a month of prodding them to actually get them to do it. And they seemed pretty expensive (although that's not my main issue). I need to put in a T and...

I'm tossing around building a small utility dump trailer. This would be built on small running gear and be primarily used for hauling very light (overall) muck (straw with horse crap) from a barn to a compost heap. The size of the box would be about 5x8 and preferentially out of stainless. I...

We have a horse farm, and mucking stalls has become an issue which will only get bigger. I have a compost pile about 1/2M away from the barn. I have to haul the 'muck' that distance every day. Its not a big deal, but I don't have a good system of getting it there. We have been simply using the...

I have a question about your experience with having 2" PVC with a tracer wire installed 48" depth. What is the 'going rate' per linear foot installed? Is there a difference between 2" PVC glued pipe vs 3/4" black coil? If so, what is your guess on $ difference. I was quoted $5.12/ft for the PVC.

I've been looking for a UTV for a while. Always seem more expensive than they should be for what I'd be getting. I found a 2018 RTV X1140 demo/rental unit and has 181 hours / 761 miles on it at a Kubota dealer with a $15K OBO option. It has a full composite roof and integrated windshield. No...

OK... I give. I believe I know the problem, but have not determined a solid cure. I知 hanging 16 and ?0 tube gates on newly built fence. 8 posts driven into the ground 3+feet. Gate 1 went well and gate hung correctly. Moved to gate 2...and the wheels fell off. I believe I inadvertently...

I recently purchased a 1800's home which has been remodeled but maintains a lot of its original character. There are 2 separate coal fireplaces which I'd like to perhaps switch over to either wood burners (preferable) or at least a good gas log/gas log insert fireplace. My main goal is purely...

Putting in fence with several very visible straight stretches. I had a nice Bosch laser level which was stolen, so I知 looking for something which will give me an EASY straight line for fence layout. I know about a transit, but I知 really looking for something I can do alone if possible. I...

I've searched on the site, and most of the information and threads are relatively old, so I am going to post this in an effort to see what people know about TODAY'S options for metal roofing, underlayment, and Fasteners. I'm building a horse barn this summer, and I know I want a metal roof. I...

OK all you plumbing aficionados, I have a few questions about pressure, backflow valves, and automatic paddock livestock waterers. Needs: 1. Water to be brought about 1400ft to barn from City water source? 2. At least 2 livestock waterers to be put in, between the city water line and the barn...

1999 Corn Pro 2 horse GN trailer Pull with a 2006 F350 diesel dually I recently purchased this trailer at auction, and as I am looking it over, I see now that I need new drum and electric brake assemblies. 4 tires with 6 lugs Brake assembly connects to axle with 4 bolts 10” drum assembly -...

I have a Chinese import articulated flail mower which has been working fine, but I have a new issue. The hydraulic lock valve on the main 'raise/lower angle' cylinder began leaking and a fitting broke. I have always hated how this was setup, floating on nothing but the connections to the...

I grew up with tractors, and to my knowledge, we never had an issue with algae in diesel. I am 99.99% sure we never treated anything, but then again... I was more of a worker and my Grandpa could have had that all covered and I never realized it. Fast Forward 30yrs. I purchased a 5100e 3 yrs...

I live in Indiana. Trees and shrubs have leaved or are in the process of leaving out over the last 2 weeks. I am looking to put my home on the market in the next month or so. I have 3 lilac and several 'fire bushes' which I fully intended to cut back relatively drastically in order to rein in...

85ac hay, pasture, etc. most mowed by 15 batwing. But I need to get a ZTR for edging, roadsides, around trees etc. Grass will be heavier as this won't be a weekly mowing. So, need the hp of the biggest machines to power through. The ground is a little rough and there are likely to be sticks and...

About 9 years ago, I had the bright idea to plant about 200 tulip bulbs in the grass, along my walkway, thinking they would be beautiful every year from then on. Well, the first year they were spectacular. Won 'best yard' for the summer, in my neighborhood. The next year, they bloomed at...

I will hopefully be building a workshop later this year, and I had a rough idea about how it would be. I just happened to see this pic on FB this morning and it got me to thinking about main door placement. The shop will be a mixture of shop tools, welders, etc but also I want to have a place...

My son was put to work, helping me remove fence and pull trees last summer. He did a good job, but he had an incident with a tree getting away from him because of a grasp with the Intimidator, lower than center of gravity. When he lifted the tree, it rotated on him, pushing the root end into the...

I put in a mix Alfalfa/OG pasture fall before last. We had such a wet winter/spring that it took almost until the end of summer to actually seem to establish. I had about 12-14" alfalfa at the end of the year and decided to just leave it alone. Now, it has died back and the OG is visible, but...

This is a cool trailer... but I need some help understanding the real world purpose. It seems like it would do little that a competent driver could not do. What am I missing? Or what is it BEST used for?

I have a great general farm Stihl 251C 16" saw which, up to this point, has always done what I needed. However, I have 2 large trees which are simply too much for it and I need to do something else. There are not a lot of trees on my property, so this isn't for logging or big long term need...

2 days ago, about 10pm, a loud crack/thud sounded just outside the window at which I sat. My wife jumped and asked 展hat was that!? At first, fireworks ran through my mind, as my neighbors tend to celebrate about any and everything via pyrotechnics... but the sound and locations wasn稚 right. Then...

I have an idea and a working albeit cobbled together, working model of a foam cutter I need for making custom pillows. The basic idea and machine are proven, but I need some help on making an actual USEFUL machine so I can do the work. Basically I need a Mechanical (I suspect) Engineer to...

I have a project in which I need a 'die grinder' type device for power, but I don't want the RPM of a typical die grinder. I am looking for something to power a cutter which I am designing, but need the RPM to be drastically lower. Tho RPM on the tools I have seen are in the range of 13-20K and...

In KY, we had the wettest year on record by about 5". We had the 2nd most rainfall in the USA outside of somewhere in WA. I also put in about 60ac of pasture, which has done abysmally. Some areas did fine, but some areas are so sparse that its hard to tell I did anything at all. I tried to...

Yea... when I see something 'too cheap'... my mind immediately thinks

I need a 叢ower source for a project I am working on. I believe a long legible shaft attached to a higher HP/torque motor would work. But, the ones available which I suspect would work are Suhner motors costing from $1K and up. Since I知 not sure my project will ultimately 層ork as intended? I知...

About 2 years ago, I think, I was thinking about getting a FEL snow plow. One of the big issues was that in order for it to articulate 'Right/left', they typically are pushed WAY out front, which is even further than the regular FEL. As I was investigating, I happened upon a guy in either...

I have been putting in a new road, and finally have reached the last 2 places which will need culverts. One is a relatively shallow but wide ditch, approximately 18" deep by about 8' across. I have kept it very shallow, flat, and wide as that is the best way to prevent erosion. Typically, it...

This is how we deal with Rocks and fencing where I live.

I have 4 broken bolts on my tractor. 10.9 - 20x90 bolts, broken off about 1/4" below the frame surface. I drilled one out before and replaced it. Drilling it with a hand drill and time + frustration. But I was able to remove it without anything more than sweat. I have a compact mag drill now...

I think it would be beneficial if you put a water wheel at the bottom of your 'road'... then you will be able to use all the work you are putting into this project if things don't go as 'hoped'.

I am NOT looking for options in the country. I have decent internet and Satellite tv. But, I do have a house in town which I stay in occasionally, but not enough to continue paying the huge costs for TV. I will definitely maintain internet connectivity though. Speed is 300mbs download, so...

We have been tossing around getting a UTV for a while. I壇 have one by now, but they are so damned expensive, just for something to run to the field. But, I think we need something as we are hiring some part time workers for the farm, and I don稚 want to ferry them all over the place so they...

I am putting in a road and need to install 3 different culverts under farm road. Overall, they are relatively shallow unless I do a lot of road buildup in order to get enough coverage to meet 18 minimum. I suspect, putting the culvert at 組rade with water flow, with a 12 culvert, I壇 have...

I have a 2001 Chevy Tahoe with just over 200K miles on it. Its had some intermittent work, but biggest is we just overhauled the transmission. It has been running very well, and we wanted to just keep it as a spare/farm type vehicle. My wife loves it and when we looked at getting a new one as a...

It seems as though my AC isn't working as well as it used to. JD 5100e - 1500hrs (I've put on about 1100 in 2 years) Heater works fine. Blower works. The AC just doesn't get very cold. And I hear about it every time my wife gets in to do any mowing. I've cleaned the condensor screen by the...

I had a new 'radio' put in my F350 about 6mo ago, and its been working fine. I was driving on a slightly rough road yesterday when all of the sudden, I began getting severe radio feedback from the engine. Like the ground or whatever has fallen off or some wire is touching something it shouldn't...

This is a parcel which was selling in Plano, TX a few years ago... Every little bit counts... BTW... that is 10x10' shy of 7ac.

I purchased a Stihl Kombisystem for my farm, and it works very well. I use it mainly for the chainsaw attachment and string/blade trimmer although I have both sickle attachments as well. My string trimmer heads are straight shaft style. My main issue with it is that the shaft is TOO SHORT for...

I purchased a 7Kw HF Predator Generator last year, primarily to run my welder at 220. KY had a severe windstorm last Friday, knocking out power for over 60K. 60mph sustained winds caused havoc. I live in the country and those big beautiful trees did not take the wind well. I had 3 large...

This is my first year with hay in KY. I have a guy with a 組ood reputation in the area, however I have been very disappointed. I have 20ac alfalfa/Orchard mix and 10ac Timothy. Also have about 50 more ac of pasture Orchard/KBG mix that needs to be either mowed or cut for hay. I壇 much rather...

I have built a gravel road on my property, along a mild slope, and everything went well. However, I now need to put in another road, about 300yds, which 'Ts' off the first, but runs primarily along the bottom of the slope. The depth of topsoil along the new road is roughly 3ft. For the initial...

I知 looking at getting a farm mower for fence, trees, etc. basically everything that I can稚 get well/easily with either my 15 Woods batwing or 7 articulating flail. This is for an 85ac horsefarm with lots of big trees which drop deadwood every rain. I demoed a Ferris 3200Z this weekend, and it...

Its not that I am putting them in crooked. It is that THEY BEGIN crooked. And I can't drive a crooked post into a straight post. I haven't been hitting rock. I only have rock in one place, and I am well away from it at this location. I have a rock spike and a Danuser EP20 with rock auger should...

My Grandpa and Great Grandpa built a trading post in SW Colorado... in the complete middle of nowhere, in about 1920's. Currently, it is on BLM ground. It is a dilapidated husk of Sandstone walls... but it still means alot to me. I remember by Grandpa telling me stories of his grandpa and he...

I have about 6 miles of new 4 board fence to put in on my place. I won't even begin discussing cost and alternatives, as I like my marriage and a divorce would cost me more than the fence... (although not much more I think... heh). The first quote I received for only a part (periphery of one...

I am currently in the preliminary stages of looking for a second, more versatile, tractor. My current is a JD 5100e that does my big grunt work and has an FEL for loading etc. I bulk out my pastures with a 15' Woods Batwing. But, I am currently putting in fence, and know that I will be needing...

(Previously posted in JD forum) I am looking for a repair manual for a JD H260 FEL. NOT an operators manual or parts catalog. I have a hydraulic leak in the main structural cross/connecting tube and upon opening the covers, there is an extremely poorly designed (IMO) morass of tubing and I...

I am looking for a repair manual for a JD H260 FEL. NOT an operators manual or parts catalog. I have a hydraulic leak in the main structural cross/connecting tube and upon opening the covers, there is an extremely poorly designed (IMO) morass of tubing and I believe a diverter valve, etc. "I do...

As an aside... the power of Google... This is what I saw when I opened this thread up today. I've not noticed it before... but it is really beginning to creep me out. Check the names of the books in the ad at the top.

I will be looking to purchase 'something' in the next year or so. I was expecting to simply purchase a ZeroTurn, however, after looking, I recognized the ones which are 'good enough' for my farm needs are expensive enough, that I thought I'd look at all options rather than just a mower. I like...

I have an off brand flail mower which is belt driven. I need a source for replacement belts. I've been looking online, and have yet to find anyone with the size I appear to need. 4 belts - 15mm wide x about 1320mm long (little over 1/2" x 52")- cogged V-belt. (relatively heavy) I can find...

So, there are a number of issues which could simply be set up as "new farmer doesn't know what he is doing", and I recognize this... but that doesn't change what is going on in my field. I purchased 85ac 2 years ago. It had historically (??? several years ago) been tobacco but for quite a...

I was out working today, and cutting some stumps flush to ground height. Well, as would be obvious, I was in dirt a bit and my chain needed sharpening quite a bit. I can do it, but I found that I am NOT good at it, or at least ç´*ast at it. I spent quite a bit of time on each sharpening. And...

I will be building a workshop for our farm. I envision somewhere I can bring in equipment in order to get out of the rain while I work on it, as well as a place for fabrication should I so choose. Slab floor, insulated, water, bathroom, electrical service for welding etc. I will put shed...

I have 85ac of soon to be horsefarm. It is being built from Ag corn/soybean fields, but has some waterways, pond, trees, and will have a hillside orchard and miles of fence rows. Some is on a hill, but nothing too drastic, although there are times when the pucker factor kicks in, while mowing...

JD 5100e about 1300 hours out of warranty. Last summer, I had to recharge the AC coolant and it seemed to work for the rest of the year. Of course, I didn't think about it until this weekend, when I was spraying and it was getting hot. Blower works, Compressor kicks in, but no cold air. I...

Purchased a new (to me) used sprayer and have been going over it. I had everything seemingly working well, and sprayed alfalfa yesterday without problem until about 3/4 through the last tank. I noticed a pressure drop (not exactly sure when it happened, but couldn't have been more than a second...

I purchased a 240 gal 3pt hitch sprayer and have it up and running. I'd like to add an inductor tank as well as a clean water rinse tank. The tank opening on my sprayer is NOT in a readily accessible location, at least not without a bit of work. I have room along the side and I'd like to add...

OK... All you Kiwi, Aussie, and Brit folk... Why is it that you (your country) tend to use a 'mole plow/plough' rather than lay drainage tile? And... how does it work? For you 'other' worlders... I need to drain some pasture areas, and had basically decided I needed to buck up and put in...

This is a Sat image of the space for the proposed orchard. About 3/4ac with Southern exposure.

In your opinion... is buying bulk bagged fertilizer and lime and applying it yourself worth the effort? I have 85ac, 50 or so in pasture and 20 in Alfalfa/orchard and 10 in Timothy. I know/suspect I will need to add fertilizer and lime at least yearly if not more often, depending on the crop. I...

We live way out in the country, and my wife is home alone some evenings. About 2 months ago, a 'guy' came to the door about 9pm asking goofy crap... basically casing the place. I honestly believe he would have attacked my wife (home invasion) had our dogs not been in the doorway, ready to eat...

Previous corn and soybean fields put into 20ac alfalfa/Orchard, 10 Straight Timothy, and 50 Bluegrass/Orchard. I think some of the stand was hit by the winter and wet conditions so I have quite a bit of weeds and was hoping to spray weeds and overseed to get a better stand. But, everything...

I purchased a used Ag-Chem 240gal sprayer which, while older, seems to be in great shape. It came with a Hypro centrifugal PTO pump, and I致e never used one before. When turning by hand, it turns, but is pretty tough/tight. I haven稚 put it on the PTO yet. I知 sure it can turn it, but...

This is the back end. The left 1/2 of the door slides to the right. Also, the entire gate swings out, unlatching at the left and swinging the entire back gate, on a right hinge.

I purchased a very solid 2 box steel CornPro horse trailer (older) at auction last summer and I need to add a ramp. The trailer is not designed for a ramp that folds up, but I think I can modify the door handles, etc to work. I am not worried about jumping a horse into it, but my wife is so...

I looked up the ATP... is is just a 4wheeler with a shelf on the back? I have never heard of it and don't know whether I found the correct thing.

JD 5100e 3yr old off lease at 400hrs. I've put about 800 on it myself. When I purchased it, everything worked just fine. At some point about 5-6mo ago, I noticed the vehicle speed indicator was no longer functioning. It is based on a "Roll Mode Sequence Order" switch, with PTO and hours in...

We have been babying along our vehicles for the last year or so. Everything we have is over 150K. Audi A6 at 180K, Toyota Sequoia at 180K, Tahoe at 199K. My wife's Tahoe just dropped Reverse gear. It will still go into all others, but Reverse is out. We haven't had anything more going on with...

I'm thrilled with this news. This crappy DOT requirement for CDL, etc for hauling is and always has been ridiculous. However, I'd like your agreement that I am reading what I believe I am. "... even if prize or scholarship money is offered." This has always been an issue in horses, because...

I have been thinking about a UTV for around our 85ac. We are building a horse farm and could use it many times over. However, at this point, the only compelling reason I can come up with, which makes sense, is because it won't leave as deep of ruts in the field in comparison to my farm pickup...

We are looking to build a house this year, and have been working with an architect. We told him our 'goals' and the things we would like included, knowing that we would likely have to adjust everything towards the end. Our goal was to have a house around 2500sqft, with a Master on main, 2...

We have been having a bit of rain, recently. This is one of two roads to my place. The fence to the left is 5’ and still underwater. I’ve been here 8 years and have never even seen water to the pavement. Water table is fully saturated everywhere in KY I believe. Good thing is, I see the extent...

This would be me, if I tried to plant if I even thought about getting into the field right now.

Over the next few years, I will have repeated need for trenching to be completed all over my farm. From bringing in NG line about 1/2m, water to houses and barns, dragging water to automatic waterers in multiple paddocks, as well as 200-300 yds of drainage tile, etc etc. NONE of it will be...

I am building a mid to upper level horse barn for thoroughbreds. I have the design and layout and am now trying to spec it as well as possible in order to get accurate and comparable bids. I've spoken with several contractors and there seems to be a wide range of what is best, necessary, or...

OK, for 50 years, I've hauled wood into the house 1 armload at a time. For the last 10 years, I have used one of those leather slings which is 'easier' I guess... although I think all it really does is allow me to work just as hard, but in 1/2 the time. However, I don't see that leather sling...

I am building a new home, roughly 3000sqft higher end home this year. (or at least planning stage with architect). Location is Lexington KY area. I have access to and will run Natural Gas to the house for range and fireplaces. The run will be long, likely 1/2mile at least across my land. I am...

I know I'm late to this party, but why can't you simply cut the fence at the top of the parking lot giving direct access to the road? It seems inefficient and potentially problematic, to be driving all the way around a pond everytime you wish access to the back area. You could simply fence off...

I didn't make it. So I sent an email to my HR department with a harassment complaint concerning its assumption as to my inability to perform at my ability. I requested a formal assessment concerning this module's harassment of my feelings and ability to read, comprehend, and respond.

I'm working on this BS Rules Requirement as I type this. I just received a WARNING, that I'm not taking LONG ENOUGH to go through the work. This is despite the fact that I've answered every question correctly! Why is it that we have to all achieve the lowest common denominator in order to move...

Over the next several years, I will be putting in our fence. I have a Wrag post driver on its way for posts, but I'm now trying to choose fasteners and nail gun. I'm interested in the Scrail type fasteners but have no experience with them. The thing I like is the ring/thread shank security...

We are building a barn, and a large portion of the cost is the stalls. And on this barn, I'm looking at 14 stalls. I've done some looking, and they are all over the map from relatively inexpensive but certainly functional wood to high end metal. We are more on the Metal side of the spectrum...

I have pondered the question of what to purchase... and have found my own knowledge wanting. I've often found myself in need of a drill press over the last year. I've also decided to purchase one and I began my search, as I do so often, on Craigslist. Since this isn't something for daily use, I...

This is basically what I wanted to build, but make it 'lighter' and shorter. It is for an 'English' saddle, so the stirrups will be pulled up and not require the height of this one. I was going to simply bend a few of the tubes into a similar shape for the 'long' boards, and weld them to another...

Stock trailer... I'm a little foggy on the details.

My wife asked me whether I could make her a portable saddle rack which she could move in and out of her Tahoe. She showed me a wooden one, which I could make in an hour, but I'd get no satisfaction in doing. I thought about a different idea of making it contoured similar to the topline of her...

I'm not a trainer, although I've broken horses before and have had them for a large portion of my life. But I have to tell you something I saw the other day which literally blew my mind. We have a yearling colt (thoroughbred) who is at the age of breaking and training. He will be going to the...

I'm looking at building a 'home version' of an Air-spade to do bare root transplantation of trees on my property. I think I've a design which will work just fine. However, I see the utility in adding a Vacuum to the process to maintain the soil in a usable form to reset the tree. These are...

I find these informative and thought I might pass them on so you can take a look. I'll try to remember to post them as I get them, but no guarantees. They are videos, put out by the Weather Service of Agrible, basically trying to forcast for Ag related situations. They are pretty indepth, and...

I think you are correct. I looked up Bradford Pear leaves, and they look exactly like the leaves I pulled from the tree. Its too bad. That tree is beautiful, but I don't want Bradford Pears on my place. Thanks for the help.

I've seen this thread started several times looking for a specific plant. I've tried to hunt through them to see whether any covered the tree about which I am to ask. Nothing does. So I thought perhaps it would be good to have an 'Official' ie all in this thread, thread for this oft asked...

I've been contemplating purchasing a used Tree Spade to move some trees around on my property. I have several options from 2-6" and I need them elsewhere. These are predominately Oak, Walnut, and Buckeye. The largest I can reasonably 'purchase' is the Vermeer TS44, which is a 'trailer' type...

I'm looking at putting in a small Orchard on our property, and other than eating fruit, I know little about growing trees for it. I am looking for the TBN of the Orchard world. I'm wanting to be able to discuss things and ask questions of like-minded folk on this topic. If anyone knows of a...

We purchased 84ac of beautiful mildly rolling pasture in the Lexington KY area. It was row cropped for several years and tobacco before then. Most of it is cleared field, with only a few large trees. I have a spot which has around 20 4-500yo blue ash which are on their last legs (They'll likely...

As I was perusing literature on effects of cattle saliva on plant growth... (it helps pretty dramatically BTW)... I ran across this article. I thought that perhaps a big kumbaya session was in order and perhaps we could start here. While I won't expect you to read it all... here are a few of the...

I purchased a used 500gal plastic water tank on a 2 wheeled purpose built trailer. It has plenty of room on the tongue onto which I'd like to add an electric start if possible (wife) water pump. This will be primarily used for variant watering of trees, shrubs, and also for horse troughs until...

JD 5100e with just shy of 1200hrs. Purchased used at 450hrs last year. I've put a lot of work on it, IMO given most is weekends and vacations. Maintenance has been kept up to date. But I had a fault light go on last week while working. It is the main 'check engine' light that doesn't really...

Duplication Don't know how to delete the thread.

John Deere 5100e I want to change out my current Halogen lights for LED lights and add a light bar. I have the lights, but I am having a difficult time figuring out what type of connectors are on the ends of the wire harness. My goal would be to simply purchase a couple more connectors, add...

I purchased an old disc, and I need 2 replacement hubs or bearings for these hubs. The current hubs are 4 lug and I'd rather have 5 lug simply for convenience in finding 2 more wheels. I pulled the hub, and the replacement hubs I've found are all tapered. However the spindle on the disc is...

I purchased an old disc which, when wings are folded out, is about 18'. It probably weighs around 3-4Klbs. It has hydraulic lift, up onto well.... herein lies the problem. It is designed to have 4 wheels, however, currently only has 2. 3 of the 4 hubs are 4 lug with one being changed to 5 lug...

I'm setting up to put in some fence this fall. I'm getting a Wrag Commander XL driver for the post driving work. However, there are a couple places in which I know I will need a rock auger. I will be getting the Danuser EP20 for the head but I'm trying to decide on a bit. I like the...

I would like to mechanically 'machine' some open cell foam. I am looking to build customized pillows. I've been building/forming them by hand, and this isn't a reasonable way to go about making them. Each is different, specifically designed for my patient's shape and needs, so a mold will not...

I need/desire a Brillion seeder for pasture and alfalfa/grass establishment. I've about come to the point that I might need to get a newer version if I cannot find a GOOD older one at a reasonable price. I see older ones occasionally, but they are sparse and some have premium prices for rough...

Growing up, I think we hired a sprayer once... perhaps we borrowed one, but otherwise, we had a pump handheld which we used for problem areas or specific issues. Now, I find that I have a need for an Ag sprayer. I've had several times, over the last year, in which I hired out the duty. The last...

I'm tossing around putting about 30ac of my place into alfalfa/orchard grass mix hay for personal use primarily. This will produce MUCH MORE hay than I need, but at this moment, I don't need that much pasture either. My initial plan was to put everything into bluegrass/orchard pasture, however...

hawkeye, they are the same. That must just be the pic. I can get it tight, and without any movement. But, the shaft is by definition to small for the HP of the tractor and the machine. I'm going to look for a new shaft with a clutch. Perhaps a new shaft with a shear bolt of the appropriate...

I do not bring it up from idle. That is not a feasible situation in my real world. I cannot idle down every time I want to begin mowing. I have no strange noises. Everything begins and appears fine. It begins spinning, and everything is smooth, but I think the stress of getting all that metal...

I just purchased a new flail mower. Straight from China. I ordered it, shipped it in, and put it together. Everything seems to work normally. Everything turns by hand, but the flail is 84" long with hammers. The gearbox isn't the biggest one I've seen, but I suspect it should be adequate, at...

I was just perusing Govliquidation.com and noticed a 3 pt JD 'bush hog' for auction. It looks like it needs some work, but anyone in the area will probably be able to pick it up for $25. 2006 John Deere Bush Hog. This lot is being sold as-is, where-is. REMOVAL TERMS: Buyer is responsible for...

Currently have Windstream via DSL. Only thing available in my area, and the wired isn't bad at 100mps. However, the wireless off this 'company' router/wireless system sucks. I get about 10mps down wireless, but it is spotty at best. Windstream says I can get another router, but it must be...

They said $700+... I'm going to look at it Saturday. I had simply assumed the fix was straight forward. They might be thinking it needs to be 100% when I am looking for 'functional'. I think I just need a cylinder headcap that fits my piece. However, it doesn't screw 'around' the outside, it...

My old scraper has turned out to be more of a hassle and hindrance than a benefit. It seems as though everytime I turn around something else goes wrong and as soon as I fix it, a new problem arises. I have need of a new hydraulic cylinder after this one blew the back seal off and they repair...

I will be putting in a 'sound system' in a couple barns over the next few years. What have you found that works and doesn't? What is worth the money and worth the time? What I would really like would be a few wireless speakers mounted around the barn, hooked up to a system which runs off...

This week, SCOTUS shot down the ability for a manufacturer to impose 'post sale' injunctions on a product. In short, Lexmark (computer printers) had sued a printer cartridge refiller for patent infringement and breach of contract. Basically saying "We sold those cartridges at a 20% discount...

I purchased the Construction Attachments 84" grapple from EA... it is too much 1270lbs. They recommended it based on the HP (100) of my tractor. I use it heavily, but in reality, I lose a lot of capability because of the degree of indestructibility. Construction Attachments XTreme Duty Root...

I have used ratchet straps for many many years. I always keep them rolled up and hooked together, and my system works... but not as well as this one does.

Purchased through EA a year ago. 2.5 miles of fence pulled. Countless trees. Tons and tons and tons of brush. Best purchase I've made thus far. I'd do it again today, if I didn't already have one.

We've had a about 3" of rain over the last week or so. The pond is completely full and running out the overflow pipe for the first time since we've owned the place. When I bought it, it had a big break in the dam and the water was about 4' lower than it is now. I dropped some dirt into it, just...

I have a need for a Porta-power type system. I need to move a heavy arm on my scraper about 1" to allow it to slip by an impediment. I was going to just purchase the HF model, but currently, they are running $199 for the 10T model. This is fine, but I just happened to jump onto Amazon and they...

I purchased a Hobart 210 MVP and I have been having a lot of birdnest issues at the drive wheels. Hobart .035 flux core Orientation is correct. I've insured I am using the knurled groove. I've set tension tight, loose, 'appropriate according to manual', 'finger stoppable at gun tip'... all...

Took me a minute to compute.

I had some trouble in class last night, and I can't figure out the issue. Worked on filet welds. He still has me doing spray arc. I think voltage was 26.4V and unfortunately, I don't remember wire feed. At first, I had been too slow, and was making my welds far to big, they were hot and flat...

I have a question about my pond, fish, and the effect of a single heron. First of all, my pond is about 3/4 silted in, and I will be cleaning it out in a year or so. I plan on stocking it with fish. I'm not a big fisherman, but I'd like to have something around for grandkids, should I...

I was simply holding/guiding my trigger hand. But it was 'closer' to the arc. I am sure I don't have very good overall basic skill. My 'educator' is knowledgeable, but I think he is more of the 'get at it' kind of teacher. He answer's questions, and walks around every now and then, critiquing...

Rope still has its uses...

I just purchased a back blade with 3 hydraulic cylinders. It is used and off Auction, so I haven't actually even seen it in person yet. The blade has a diverter valve already installed directly on the blade. The previous owner only had 2 sets of connections, but 3 cylinders to operate...

This is an ad for a mobile welder, he is showing some things he's done. I can't figure out if I am impressed... or just really really concerned that he'd go to the trouble.

Re: Die grinder bit help... 1 1/2" opening from egg shaped 1 3/4" beginning? Unfortunately, this is what I have to work with... and now, its 1/2 full of dense clay. It was completely FULL of clay, but my son shoveled out enough to get to the hole inside, so I can put it all back together. So...

I purchased an old (probably late 50's early 60's) pull scraper. Parts were discontinued in 1981. I currently have an issue with the cylinder dump pin/bushing. It wore so badly, that it stripped off the nut and came out. I had it turned true (or almost so) and a larger bronze/alum bushing wear...

Here is the only pic I have thus far. During hookup... found out... hammer straps and Woods upgraded rotary hitch are not compatible. Was disappointed, to say the least. Now I have another connector to deal with...

I just purchased my 1st Batwing. Woods BW 180X HD (15'). It works great, but as I was mowing yesterday, I realized I've never pulled something like this, in a turn, with the PTO moving. Even if I stop the PTO power, it coasts for about 30sec, which is understandable, given the size of the...

Just took my 1st official welding 'class'. Actually, its basically just proctored booth time. I was introduced, on my 1st day, to Spray arc. Now, this was a very interesting technique, of which I've heard but have no experience. He set up the machine in such a way, because I had told him my...

I have an HF 8750/7000W gas generator that does a great job. But in looking at welders, I've seen then state the generator must be rated as 'clean power'. I somewhat understand what they are saying, however, I don't know (doubt) that mine is rated as such. Is there something I can...

I've read so many different threads I can't see straight. I'm ready to pull the trigger, but just when I'm about to do it, some more information seeps in and messes with the equation. I have need for a welder, likely Mig. Grew up with a stick Tombstone but haven't touched one in about 30yrs...

I purchased my grapple from EA, and they are great to work with. I looked at many, but went with a very heavy grapple. For me, I wish I'd have gone with EAs largest root grapple, but I was encouraged to go with a Construction Attachments heavy grapple given the 100hp tractor upon which it was...

Purchased a used 2006 F350 6.0L diesel. It is doing fine, but there are a few things which need addressing. One thing is I have a couple dash lights which are out. Gauges work fine, but the lights are out. I have watched a video on removing the instrument cluster, but I haven't seen anything...

That link didn't work. Also, if you purchase them, make sure that the notches are spaced appropriately. I know mine were not and I had to notch them. This could have weakened them somewhat, I recognize this, but I've had 3 snap. I've thought about just finding someone with a CNC machine, and...

Purchased a 2006 F350 CC dually diesel truck and it's doing a great job for me. But somehow, ove 150K miles, the previous owner was able to wear a hole through the steering wheel cover... and it's bugging the crap out of me. The leather is worn through, and a small loose flap sticks out. Any...

Does anyone have information or recommendations on a way to attach a shovel to a quick hitch? I am always needing a shovel it seems, and I have no good place to carry one on my tractor. But I recognized I could mount one across my QH pretty easily. I have been looking for something secure...

Can a 1ga wire connector be mated to a 4ga connector? The 4ga is 50amp. I've only used the 4ga size, and was going to hook up a connector from my truck batter to the back of the truck for a direct dump trailer feed. I thought I would also use it to power my 12v fuel transfer pump on the tank...

I have a F350 CC dually and I find that I will often need to carry a few things around in the bed, but they invariably slide all over the place. The most typical culprits are gas/diesel cans. Has anyone had any luck with those ratchet bars that span the bed and simply press tight in order to...

I recently purchased a new Dump trailer and realize the ease at which it could vanish. There is an 8-9yo thread, but I wanted to find what people are using now. What are you using as a lock to keep it from rolling off? I purchased a 'Blaylock' thinking it would be pretty good, but when I...

I am going to be refurbishing a 120x40' tobacco barn. The roof is old aluminum with some cross running boards with approximately a 4" gap. *(I'm around 30' away, looking up.)* I'm going to have a ribbed steel roof put on, but given the southern exposure of an entire side with a good angle to...

I noticed a new thing on Amazon during my last purchase a couple days ago. They were offering $5 off of next purchase, if I was willing to accept shipping as a 'non-rush'. It gave me the option at checkout in the place where you choose which shipping speed you desire. I was ordering 3 things...

I have become tired of wondering... What is the reason for the 'stand-up' riding lawnmowers? The large commercial mowers which you either walk behind or stand on. I've even seen the walk behind version with a little cart to ride upon. What is the use of them vs a similar size Zero-turn? Only...

I have been removing fences from all over my property and want to be as sure as reasonably possible, that I've picked up wire/nails/etc. I've walked the lines, but each time I walk it again, I find something else I missed. And while I know there is no way to absolutely insure everything is...

jenkinsph... you might see about renting a Post Driver. It will save you a HUGE amount of difficulty. For 1200 posts... no tamping. In and they are done. Pilot Auger

I've been slowed extremely due to the weather we have had over the last month. I went ahead and rented a D6K which carved the road in a jiffy. Well worth it, regardless of my thoughts of doing it with my scraper. The speed at which I was able to cut it made all the difference. I still have...

I went with the Load Trail Deckover with fold down sides. It was a hard choice, in that I liked the Diamond C being painted rather than PC'd. And it was 7gu. But it was a standard height trailer, and I, at this point, think the utility of the fold down sides, for my purposes, will make the...

I have been trying to get by without a dump trailer for about 6 months, making due and doubling trips, and it is taking much more time than I have available to get jobs completed. I've been looking for one for a while, and rented a bumper pull a few weeks ago. I think the bed was either 10 or...

I'm frustrated with what I've found thus far for cleaning off my boots, prior to entering the house. At the end of the day, I take them off on the porch and its not an issue. However, throughout the day, I will need to run inside for something, and inevitably, I track in a bit of...

I'm also looking for a 15ft batwing. I had never seen a Land Pride before, but liked how they looked. I don't know that I liked them better than the Woods in the same size. The spindle and blades seemed a bit beefier on the Woods. But, I certainly wouldn't toss it away. The Woods is $500...

I went out and looked at some batwings this morning. Woods, Land Pride, a single Bush Hog. Any thoughts on any of these would be appreciated. I won't be needing these for brush or trees. But for pasture only. I have no knowledge of Land Pride, I've heard of them, and this machine looked...

80ac of new kentucky bluegrass/orchard grass. JD 5100e w/cab 100hp - 540 PTO speed I am looking at purchasing a batwing for the above farm mowing. Intermittently, there might be some acreage left for haying, but the above is the maximal use I will have for the mower. There is no significant...

Quick question about setting up power from my tractor to my (soon to arrive) 12v GPI fuel transfer pump. My intention is to use a new 2gu set of inexpensive jumper cables as cable. I was going to cut off the clamps and attach eyelets at one end, attaching it directly to the battery posts and...

I won't post pics of all... but you opened it up. But here are my 3yo Tbred Racehorse and our newest filly (1mo)

I am from Southwest Colorado. I grew up haying as a way to feed our cattle through the winter. I've spent many monotonous days, eating dust as I baled on a JD 4020. We always had it custom cut, as a swather was not going to pay for itself on our acerage and we had plenty of other things to be...

Agricultural Soil Compaction: Causes and Management

Be aware that any 'sweeps' or anything that cuts the ground at any angle will result in subsurface compaction. You might want to check for any hardpan in the areas in which you use a field cultivator, and if found, break it up with a subsoiler. This is an excellent article on the effects of...

I've been working on building my farm in the Lexington area of KY. I was initially going to just no-till drill my final Bluegrass/Orchard grass pasture this spring, but time is not going to allow it. I still have quite a bit of 'final dirt work' I want to do before the final pastures are put...

I have the next one for you all lined up. Just let me know when you're ready to start, and I'll be sure to leave the gate open.

This is a bit of what I've been doing this week. I have about 20 - 400yo blue ash that have been farmed around for 20+ years, without any upkeep. We are clearing everything. Being in KY, we have a huge amount of honeysuckle. Left alone, it can grow into several trunks from a common root. This is...

I am coming up on 2yrs on this tractor. I purchased it used at around 500hrs in 8/16. I've put about 200hrs on it since. I have the opportunity to purchase extended protection on it, if completed before Mid March/17. So I have just a couple days. I have a horse farm (or am building one) and...

I like the idea of FEL implement storage on a pallet rack. Depending on the size of equipment, I think it is an excellent way to avoid the 'sprawl' of 3ft tall iron all over your equipment yard. Something along these lines. My things might be too big for the rack, but I suspect they make...

I know its expensive, and I can understand the reason for NOT purchasing it. But I have to say, I would purchase the Danuser Intimidator all over again. It is just that good at doing what it is supposed to do. I am sure there are others which will also do the job, and that Notch looks like it...

I use 5 - 5 gal yellow plastic TSC cans. I leave the generic spout on, simply because it keeps the diesel in the can. When I fill the tractor, I use one of the yellow funnels that attach directly to the can. I would highly recommend it. It makes filling as fast as you can pour from the can...