loader

Without deference to brand loyalty, does anyone have a clear preference to a certain brand of skid loader and why? Just now starting to look. Would prefer pre emissions. Definitely want a tracked machine. Gravitated towards Deere (like a 333) and CAT (like a 297), but would buy any well known...

Here is a PDF for how I did it. I hope it helps you.

Just purchased a used Westendorf loader to mount on my NH2120. The NH has an existing 2 spool remote control assembly on it (diagram attached). 3 lines run in to the valve assembly and 4 lines run out to the implement. The Westendorf has an 2 lever control mounted to the loader with 2...

Anybody got information or deign for building a loader similar to the MF 232 loader? The only ones available are attached to tractors, and I have the tractor. Any help will be greatly appreciated.

What are the torque specs for the loader bolts on the DK5310 with the KL5520 loader? I can't find that information anywhere. I torqued them to 150ft lbs as they were quite loose and the loader was making some noises. Thanks for reading..

I was pushing a tree with my New Holland workmaster 75 hp which has 550LU loader. Some how the quick attach on right side came of and now would not fully retract about 5 inches on right side. Please help.

Anyone with a montana 2740 know or can measure length of loader cylinder? Rebuilder lost my cylinders so need replacement size. I have bucket cylinders still attached so just need length pin to pin in collapsed position of loader cylinders.

Im looking at a 2008 Case IH Farmall 31 tractor with loader cab and belly mower, owner says it has around 400 hours and runs fine. Its been sitting for sometime outside and currently the battery is dead and owner claims he hasn’t had time to use it and is looking to sell. Wondering if anyone has...

Greetings, I am looking to get a Front-end loader kit for 1978 MF 230 2WD Diesel Tractor. I live in Washington State.

Have a dk55 with the cab. In the manual it states the full capacity is about 2800lbs for lifting. The problem is, when we attempted to lift about 2,000 lbs, the rear wheels about came up off the ground. They have fluid in them but now we are thinking we need to add a counterweight to the 3 pt...

Ford 555B Loader Backhoe takes a long time to get moving. If anyone has answers that'd be cool. If the tractor is cold, even when put into forward, and with the rpms raised (or not, doesn't matter).. doesn't move. I've watched my father sit on this thing for 10 or 15 mins waiting on it to...

I have a 2016 Cabelas LM75 that did not come with a loader. It does have the joystick. I came across an old Woods LU126 loader but no mounts. Woods said the mounts were TYM made but I can’t tell if they will fit this loader or not. Anyone know if that loader mounts on the stock TYM loader...

Will a 120E or a 120R fit on my 4010 Compact Utility Tractor?

I have a Besko 2-spool loader valve on my 2014 vintage T254. It is real loose again and the lift/curl positions are more oblique than straight (just up/down side to side) It has been that way since the day I bought it used. I have taken the cover off and tightened the bolts which help with the...

I bought a front loader (used) for my Zetor 7245. I am trying to understand how it functions as the system is not straightforward. There are four valves, three of one type and a fourth that's different, that I would like to understand what they are for. I drew a (crude) schematics based on...

Or Kubota LX2610's LA535 loader needs a new o-ring in the 1/4 in Parker 60 series female quick coupler. As far as I can tell, it is a 11/16 x 9/16 x 1/16 o-ring. Can anyone confirm this; most hydraulic sites don't list the actual dimensions. Thanks

Greetings everyone! I have a 1965 Ford 4000 tractor that I've owned for the past 15 years, and it has served me quite well. I use it for snow removal / driveway maintenance, and I've always wanted to add a loader and need some help to get there. What make/model should I be looking for? Thanks!

Removed the front end loader from 1025r. Re-installed 2 hours later. Now, when I try to tilt the bucket down, it comes up. Hoses are connected properly.

TyrFil™ Flatproofing – Carlisle TyrFil™ Anyone ever use this stuff? How do you replace the tires when it is time? I can see some pro's and con's. My biggest con, is it adds weight. I bought a compact wheel loader and my requirement was 11-11.5k operating weight, to keep it legal when I haul it...

I'm trying to figure out the location of relief spring on the valve and what kind of shims I need. I think I have found where the spring is, on the top. But there's also one on the bottom. My primary issue is break out force on the curl, it doesn't do what it should. It's a 1986 tractor, so I'm...

Am I the only person who has a problem with the loader and bucket assembly being sloppy? It seems to have a lot of slack in every pivot area. When I back drag with the bucket is when I notice it the most. There seems to be a lot of slack where the loader arms connect to the loader frame that...

I hope I am in the right place. I bought a piece of property that I want to develop so I bought a 1979 1105 Massey. It has a blade and frame for it but I also need a loader. I am not finding one for that model but I was wondering if I could buy almost any loader and make it work. I am not a...

I am new to this website, so please let me know if this post needs to be moved. I am searching for a big loader attachment that fits my Steiner 430 Max. I believe the LD 300 model will fit, but I am open to any other models that fit as well. I live in Ohio, but I am willing to drive or pay for...

The curl function on the joystick of my Branson 4225h is stuck. I'm not experienced at fixing stuff; can anyone comment on my reasoning before and suggest where to look next? (It's my week for breaking stuff...including the truck I could use to take the tractor to the dealer/mechanic, so it's up...

Hello, I recently purchased a JD300 backhoe/loader. First industrial heavy equipment I've purchased. Issue is, when I need to start the backhoe, I need to pull the choke in and out and in and out and "pumping" the choke while turning the key for like 5 to 10 seconds to get it started. Once...

Let's just say things happened, just can't have nice things and now I need a new bucket curl cylinder for a bobcat ct2025 with the fl7. I'm not sure how to measure to get an aftermarket but if I can figure it out I know it would be about 1/4 the price of bobcat, also my local dealer isn't great...

PT425 with bucket, 60" mower, bush hog, mini hoe, forks, and hitch adapter I believe it is a 2013, has the robin engine with ~1200hrs, other than the bucket, the attachments have been used very little. Located just north of Charlotte,NC I believe it is a 2013

I've seen some of the older tractors with a front loader. They look rickety. I don't expect old to look brand new, but since I require a front loader, how old a tractor with a loader would you consider. For the sake of argument, please suppose the tractor itself is in good working condition...

so she cranks but wont fire! I found she isn't getting fuel because after some testing without luck I finally decided to put gasoline on a rag and cover the intake with it and she fired right up. This tells me it is getting everything but fuel. I noticed I wasn't hearing the click as usual from...

I have a Hinomoto E324. I have seen pictures of them with a loader. I am looking to at least install a rear remote to run log splitter and maybe a haybine. Do anyone have one who can send me a picture or where it is plumbed into. I know there are more that one way to do it but would like to see...

Hi, I’m wondering what this symbol is, I’ll attach a photo below. It has a toggle switch at the back of the joystick. Thanks. It’s on 2012 MF Q31

Anyone know the aftermarket loader options for a Kubota l4330

I have a McCormick CT28, built by LS, with an L105 loader. I need the sleeve that bolts onto the control valve which the cable runs through. I also may need the cable that runs from the valve to the joystick. Any help would be greatly appreciated!

Hi! Does anybody have any tips, techniques, or ideas on how to keep horse manure from freezing to the bucket on a backhoe? Wicked hard to chop it out if it gets frozen….(and it usually happens EXACTLY when you need the backhoe for something else, right!?!?) 😉😂 I’ve tried putting a layer of...

i have a CAT skid steer model 232b2. i haven't been able to get the arms to raise up on it. with machine running parking indicator lamp does not come on. when i am pushing the button to release the parking brake, the seat belt indicator light starts flashing. machine will move, but i cannot...

What kind of chain hooks work well with the RK37 bucket? Recommended Tooth Bar for RK37 bucket? ( The web site says the bucket is 61".) The RK37 bucket seems a bit light weight so I am wondering if a particular brand/model chain hook works really well with it or if it needs reinforcing. I...

I have an 1835MHC that I bought this past spring. It is used 80% of the time for mowing. I generally leave the loader off for easier trimming next to objects and only attach it when I need it. I have noticed that with the loader installed that my power steering loses quite a bit of power...

Hi there So after owing a Kubota B7000 with a loader I've built, I know how versatile a tractor with a loader is and the amount of things that it allows for us to do. Since this new tractor didn't come with a loader, mostly due to the price that would add. This lead me to search for an used...