Traded my tym t25 in for a ls mt226he. Says its supposed to lift 1900lbs to half lift, bucket is 66in wide. I am assuming in the 8 cuft range. Yesturday i was cleaning up muck that i clean out from my pond, a nice mixture of wet clay and vegitation. There were times i had to back out of the pile as the loader wouldnt lift or curl. I know wet slop is heavery than dry dirt, but from what ive researched 8cuft of clay would be in the 800-1000lb range. Makes me wonder if the loader is over rated and or the relief is set too low
