Looking for a place in florida that can test a Lucas CAV pump off of a Ford 335. Had it rebuilt but not sure the guy that did it did it correctly. Before I go through the trouble of putting it...

I have a 1970 Ford 3000. When I put the hi lo gear lever in neutral the engine does not start. But if I wiggle it back and forth the starter kicks in intermittently. I have to move the lever into...

Can anyone please advise what the pin is under the gear box. I have had a few drops leaking from it - not sure if it is water or oil?

Hello, has anyone replaced there non-teloscoping lift arms with telescoping lift arms on their 3 pt. for a 1971 Ford 3000 tractor. If so what part number or what tractor telescoping lift arms will...

I have a 1971 Ford 3000 tractor with original 971 hours. I have owned in since 1998 and has had a 3 pt lift arm issue since then. I recently installed a 2 spool hydraulic valve to operate the...

Hey Folks, first post here! I have a 1970 Ford 3000 Gas. I recently split the tractor and flipped the ring gear due to damage from the bendix beating on the teeth several times when starting, due...

I have a 1965 Ford 3000 diesel tractor. I bought new fuel injectors and noticed that the tops are shorter .the old ones tops are removable and have a spring in them. Did I get the wrong ones?

Hi everyone I have a Ford 3000 and I am in Au if that makes a difference at all. Looking for some insight into a problem. Up until now this tractor has been very reliable. Fantastic tractor for...

Hi, Maybe someone can help me on this. I am looking at a Ford 3000 Gas tractor. It is about 300 miles away. The lady selling the tractor tells me it does not have the pump shaft for attaching a...

I've changed a few 3000 clutches and they're often different. The one I need to change now is about $450. I can get one for half the price that looks to me like it should work. Both have the same...

First thanks for any response to my issue I have a 1970 Ford 3000 with an FEL, had it for 8 years now and loved it until now. Went to lift a load one day with the loader and it would not lift and...

Just thinking... I would have to sell my Kubota to pay for it. It would be over a half century old yet it seems like there are clean units out there. Concerns: Would it be able to handle a 3pth...

I've been working on this tractor for a while now. Every time I fix one thing something else happens. While checking the fluid levels in the transmission and rear I found the transmission over...

My 67 Ford 3000 has a block heater in it, but it is missing the cord. I don't know if I can find a cord that matches it, but if I want to check to see if the element is even any good, I just need...

I am trying to fix upp my,hydraulics on my tractor for the first time, I do'nt know how it chould react inside the body of the tractor when I move the lifthandel. I can only move the handle 1/2...

I contacted Anglo Agriparts in the UK to order more fuel filters for my Ford 3000 diesel and have them shipped to me. Thought it was cool to keep filters that say "made in England" on my...

My hunt club ownes a Ford 3000 tractor and one of the guys call me yesterday and told me the fuel tank was leaking. I haven't been out there yet but was wondering what is involved in replacing the...

So got my new to me 3000 put away, waiting until all the manuals I ordered for it come in. The seller/restorer I bought it from claims it's all new oils and filters, but I still want to go through...

Hi, I'm about to start working on the injection pump on my Ford 3000, 1967, diesel, Simms/Minimec injection pump. To do so, I have to turn the engine to the 19deg btdc mark on the flywheel and...

I have a 75 model 3000. It will run for 45 minutes then loss all power. Will run but will not take any load. I have changed the coil, condenser, wires, plugs, rotor, distributor cap, carburetor...

Good morning, I have another older tractor project. 1975 ford 3000, C1013C , C453051, 5A21B ( Eng D5NN6015G ) ( Trans D2NN7006 ) . Delphi Cav #3233F651 / 140BJ. This pump is noted on 201ci engine...

I know this problem has been discussed, but I will start a new thread in the hopes of getting advice for my problem. I have a 1974 Ford 3000 diesel with power steering and the tractor is blowing...

I'm rebuilding my 1965 Ford 3000 diesel from the ground up. I'm currently in the engine, reassembling it after overhauling it. I started to reinstall the head today, but when I pulled the head...

I have a 1971 ford 3000 8 speed diesel the tractor was in very good condition until I started to have shifting problems . I bought a new shiftier and gasket from Steiner tractor. It worked for a...

Hello, I'm a newbie to this forum. I hate to resort to asking for help, since I usually figure things out on my own. Eventually. But, this one has be stumped. I am restoring my old 3000 diesel...

How do I know when to change the oil in the air filter

Need help with a ford 3000. The tractor has 2 remotes on the rear that are both in one housing. I cannot get the hydraulic hose off of the front side of the remote. The hose goes into a sleeve...

Hi, I have a 1967 UK built Ford 3000 with power steering of the type with external hydraulic rams on the drag links. Recently it started to get bubbles in the PS fluid that turns the fluid to...

I have a 1971 Ford 3000 gas. Needs a new paint job. Any refinishers in Middle TN. I'm in Gallatin.

My tires on my Ford 3000 are about 1/4" away from rubbing the king pin, can I mount the wheels backwards to gain clearence, without risking wheel failure?

New to tractor scene. Bought a Ford 3000 diesel, about a 68 vintage. PTO will not hold position and shutters when lowering. What would be the proper order of diagnosis?

Anyone added rear hydraulics on a 1973 Ford 3000. I may need it to run new flail mower

Lift stuck in up position on 3000 Ford , be sitting awhile after cranking lift raised now won’t go down

background: 1966 ford 3000, gas engine had a new engine installed after the old one died. on delivery from the shop, one of the back arms of the 3 point had broken somehow, not sure if related at...

I have a ford 3000 that was running perfectly and all of a sudden it wouldn't start. I mean, we turned it off, went for coffee and it wouldn't start when we got back. Its definitely an...

Would anyone know how to find the reg for my pre force 3000 super dexta, I have the original reg plate but the last letter is missing ,the previous ( original owner is deceased) .his remaining...

Hi, does anyone know the size of the roll pin on the PTO shift lever for a Ford 3000. The lever moves but the control shaft doesn't, it just flops all the way back. I'm sure the roll pin is...

HI all, Got a 1969 Ford 3000 diesel. One of the bleeder "bolts" on the fuel filter bracket stripped out the threads on the housing. I can tap this out to a 3/8-24 but do I need a special bolt...

Hello All my 3 pt only works while engaging one of the asc remotes . 2200 psi at pump only while remote handle in lift position.I know this sounds impossible. this started after total pump and top...

I am trying to figure out how I want to handle the air cleaner conversion. The gas 3000 is all painted or I would not hesitate to install the oil bath air cleaner that I have up front.

Hi, I have a Ford 3000 3cyl diesel from 1967, UK build, with a Simms fuel pump priming problem. I've owned it around 2 years, and throughout that time found the fuel system will lose prime if it's...

Hello All, I finished my top lid overhaul and decided it made sense to make sure the draft and position linkage was properly set before I re-assembled. As is usually the case, no good deed goes...

Hello All, I finished my top lid overhaul and decided it made sense to make sure the draft and position linkage was properly set before I re-assembled. As is usually the case, no good deed goes...

My 3-point lift lifts OK and will hold anything i lift up as long as the lever is all the way up, even when shut off. The problem that I have is that only the last couple of inches of the lever...

Went to take the hay fork off and saw a leak at the pump. I got my manual out and it states that the outlet overflow tube connects there. The tube is not shown in the book, just says that is where...

I'm about to start working on Dad's old Ford 3000 diesel and wanted to get some recommendations on what precautions and maintenance I should do to get it ready to use. A bit of history: I believe...

I am working on a friends tractor which Is mostly used to run a hay binder via remotes. He states that initially it will work fine for about 30 minutes ,then get slower and slower until he loosens...

As I was leaving the pasture I stopped my tractor to dismount and open the pasture gate. As I started to dismount my wife beat to the gate and opened it for me. I released the parking brake and...

Hi, after some advice please. I fitted a new head gasket and the holes around the two hollow dowels were a little tight so tapped it down flat with a nut just bigger than the dowel. The holes...

Does anyone know if frame mounts accessories are interchangeable between these two tractors? Thanks

Hi, I just bought a Ford 3000 but don't know the year. The model number is scratched off the name plate under the hood and I can't get behind the starter due to a toolbox being there...

Howdy Everyone- First time on here. I have a gas Ford 3000 that is having starting issues. I replaced the ignition switch, points, condensor, coil, plugs and wires. The tractor turns but will not...

I am looking for a Governor Spring Assembly for a Ford 3000 Gas. There is a similar assembly for earlier model 2000 and 4000, but the shaft in the spring is threaded and this one is drilled to be...

My Ford 3000 (gas) began to have problems cranking/turning over a few months ago. It would start sometimes, not others. The battery tested good and I replaced the battery cables. Same problem. Now...

Just bought what i think is a 1974 ford 3000 diesel and having problems with 3 point hitch. The lift arms respond up and down fine when there is nothing hooked up or with some implements but if I...

Hello, Our 1965 Ford 3000 has been down for about 9 months. When we started it up today the lift won't work. It was working fine when we last used the tractor. I don't know where to start. Will...

I just received a Ford 3000 diesel from my grandfather who passed. I believe it痴 early 70痴 model. Runs great but the rear lift doesn稚 work. Checked fluid at both fill plugs and it appears full. I...

So down right now! Removed hyd cover because lift lever seized. Got the linkage/shaft freed up finally. Bought a kit and replaced all O-rings in cover and cylinder. Flush and fill rear...

Draft control doesn稚 seem to work. Lever moves freely and doesn稚 seem to be engaging any other mechanisms.

I have a 1975 Ford 3000. I got that much from the numbers but cannot decipher the rest, any one help here? 5B03B C452342 thanks, doug

my 3000 appears to be getting gas to only the #1 cylinder (2&3 plugs are dry) WTH? Good spark and actually runs on one cylinder

Please let me know if this is the wrong forum to post this in. My tractor started having a problem where it couldn't lift much weight with the 3 point of the front loader. I tracked it down to...

I have a 1974 3000 gas. Spark was weak so I replaced points, condensor and rotor. Spark was greatly improved, BUT, when I try to start it, it backfires through the carb and will not start. HELP!!

Greetings! I've had this tractor almost 20 years now. 95% of the time I just use it to mow. Have a few implements like a boom pole,dirt scoop, pallet, etc..... but the rear hydraulics haven't...

Hey all, need help here. I have a Ford 3000 diesel tractor. It will stall when I till my garden about 150ft as the engine warm up. It make a series of sound like sheet metal rubbing (similar to...

Ford 3000, 1966, 3 cyl, gas: The tractor is clean with no rust and runs great. Of the 5 indicators in the Instrument Cluster, ONLY the generator light works. The oil light, temperature gauge, fuel...

Dad's Ford 3000 has finally given up the hydraulics on the 3pt hitch. It has been slow and "shaky" for YEAR (like 20) and is finally at the point where they won't move at all. I am guessing it...

My Ford 3000, 1966 model, gas, 3 cylinder was running rough. I put in new autolite plugs, new plug wires, new rotor, condenser and points. It is worse now, especially with open throttle. The...

Long story, but I have an 8 speed live PTO trans out of a 3000 that is in good condition, but would need a few bearings and new seals. After looking up some parts online, it would cost less than...

Hello everybody, I am new to this forum and i,m from Holland. I bought a Ford 3000 with my son to redecorate together. now I am looking for adjustment data to adjust the lifting device. the...

Hello, I am trying to remove the manual steering gear on our 1967 Ford 3000. I am unable to remove the nut in the center of the steering wheel from the shaft. The nut is loose and spins freely...

Has anyone rebuilt the power cylinder and control valve on a 1969 Ford 3000? If so, is there a rebuild kit on the marker?

I have just bought a Ford 3000 diesel tractor made in 1965. I was told that the engine was replaced about 25 years ago. I have found a serial number just above the oil tray : *C 832600 and a...

Putting my 3000 back together after burning a piston. Did not mark the injector pump lines when I tore the engine down. Need to verify the lines location on the injector pump.

Looking at a pretty nice Ford 3000 gas with power steering and 8 speed transmission - asking $4,100. Going back for a second look this week. I've owned a '52 8N for the last 17 years, but am still...

Hi, I would be grateful if anyone can help. I have got a Ford 3000 which i have had for 15 years but not used at all for two years as i have replaced the fuel tank and been doing other repairs. I...

My first tractor. I bought a '68 Ford 3000 gasser for hunting camp. I am currently going through it front to rear. Replacing fluids, changing plugs and wires, points and condenser, etc. etc...

The control valve was leaking around the spools and I assumed is was on O-Ring replacement, until I tore it apart. Well the spools were junk, pretty scored. My question is has anyone replaced the...

This is a great running tractor but today it started spewing out gasoline at the area indicated by the RED ARROW on the photo. The metal line snakes around from the other side of the tractor up...

Please forgive my lack of knowledge I am new to Tractors, I have a 1965 ford 3000 Diesel. Last year the the block cracked and I had to have a new block install. While they were there the went...

I am looking for a couple of points of help: Do you need to use the inlet at the front of the carb or can you remove one of the small bolts on the sides and use that, sealing the front? Any...

Hey guys first time poster and first time tractor owner. Need some advice, I have a Ford 3000 with a hydraulic leak coming from the very front of the hydraulic cover I believe. When the 3pt is...

Everything works on it does have any collector value?

I'm having a problem with my lift arm not wanting to stop in the upright position, it then blows the seals in my pump. The valve is not letting me control how high or how low the lift arm goes...

Hi everyone, I was brush hogging the other day and I run over a chunk of a 2x4. After that I was mowing in some heaving grass and the mower almost came to a complete stop. I checked out the mower...

My Ford 3000 stalled while cutting thick brush. During the restart it cranked slowly. I charged the battery and it would not turn over to start. Verified the battery is good and ended up...

I just bought a power assist kit for my ford 3000 with tractor running I can move the control valve on the cylinder and turn the wheels when I hook up the arm to the steering the valve will not...

So i have searched the forum and couldn't find a whole lot pertaining to the 3000. I'm really just looking to get some advice on what to check when going to look at one. The one I'm interested in...

I have a ford 3000 Just had the engine rebuild by a reputable shop. I have notices since it returned from the shop it has a tremendous amount of white smoke when under load (A light Load ) I saw...

I've replaced the gas cap a few times over the years because they eventually won't stay tight, begin to jiggle allowing fuel to splash out on bumps etc... The only replacement ones I've found are...

I am working on a ford 3000 replacing a 2 stage clutch. after bolting up the new clutch to the flywheel I noticed the adjustment screws (that contact TO bearing) were all at different heights so...

It's about time to replace the rear tires on my '69 Ford 3000. They are the original 14.9-24 R-1 "gum dipped" Firestone tires and are peeling apart like an onion around the lugs. A tube will...

I have a 1965 ford 3000 Diesel, the Hydraulics are slow to lift the three point. just looking for some advice on where to start to Diagnose the problem . Listed below are the things I have done...

I have a long story, so I decide to sell my Massey 135 diesel because of all the issue's it had. So I sold it and the search begun for a replacement tractor, I found a ford 3000 diesel that I...

hi im pretty new with tractors and hydraulics. hoping you can help me out..... ive got a ford 3000 with a front end loader. i have a 3 point hitch backhoe, id like to use. the backhoe has 2...

Hey ya値l....I知 trying to do some maintenance on our ford 3000 gas tractor, and think the breather cap needs to be replaced/cleaned. How do you remove it? I知 not seeing anyway to unless it痴 rusted...

My 3000 has Power steering that at times seems to bind / lock when turning either left or right. If I wait a minute or so it turns simply. I cant seem to find a filter number for it anywhere and I...

Before I got my Belarus I always used the Ford 3000. The cam shaft went screwy and the pistons messed up (think it was a shod job, had a good ol' boy replace them for me to save time won't make...

Not sure I can get a cressent wrench in the tight spot below the foot rest. Tractor at a different location and I'd like to make sure I have the right size wrench, leaking and I hope I can just...

Hi All, I have a Ford 3000 that has developed some hydraulic issues over the last couple of years. From the many threads I've read on this subject this is not an uncommon thing. We have owned...

I just bought a Ford 3000 gas. When I got it, the freeze plug behind the carburetor was pushed out and the engine was frozen. It is now in my heated garage. I replaced the freeze plug and put...

So I went out in the snow tonight to haul home a Ford 3000. It is currently not running. It has an 8 speed transmission, but am not sure if it has live PTO. The clutch pedal does feel like it has...

Hi guys, I have let my tractor sit for the last week or so, I left the 3 point lift lever in the down position. I started it the other day and the lift wouldn't go up. After several attempts and...

Hi everyone, I have a Ford 3000 and the Right side brake pedal doesn't engage the brakes at all - when its fully pressed i still cant hear the brakes engage. The left hand side is all fine -...

Not popping to full size. Not popping to full size. I backed up and lost all of my long post so here it goes again from the CL ad. ALL ORIGINAL SHED KEPT None Nicer Vented Hood, After market...

Hi all, working on the 3000 has been and still is a challenge. At first it would idle a few moments then stall out it would stall flat if you tried to throttle up, fuel pump helped a little, still...

We recently purchased a transplanter that is a CATII hitch. When the tanks are 1/2 full it will weigh in at 1700 lbs which according to tractor data is the max lifting capacity for my Ford 3000...

Hello All, I have a recently acquired 1970 Ford 3000 with manual steering (It actually has a weird aftermarket power steering setup that only has a cylinder on the left side. The arm from the...

Just got my dad's Ford 3000 gas. He bypassed the fuel lift pump to try to convert it to a gravity feed system many years ago and I don't know if it ever ran this way. I know he had problems but...

Hi all yesterday morning i have move a big ciment block with the bucket i seen one of my tilt cylinder leaking a little by but its long time his leaking . I park the tractor after the move but at...

Hi all yesterday morning i have move a big ciment block with the bucket i seen one of my tilt cylinder leaking a little by but its long time his leaking . I park the tractor after the move but...

I have a 1973 Ford 3000 tractor that has a (397/ 150-1 )Bush hog front end loader attached, while bush hogging my pasture the parts between the front end loader pump and tractor motor came apart...

Hi everyone this is my first post hope I'm doing it right. I have a ford 3000, the pressure line keeps popping out of the pathetic excuse for a compression fitting at the pump. After wasting time...

hello everyone!! I was needing to replace the pto shaft seal on my ford 3000,with a 4 speed transmission, and got in a big hurry and forgot to engage the pto shifter before i pulled the shaft...

Hi everyone. My tractor got stuck in 4th gear yesterday and it's happened in the past. In the past I would take the shift plate off and take it out of gear and put it back together. So I've always...

Hi Everyone, I've got a '75 Ford 3000 and I can't get it to start. It's a diesel, CAV pump. Background, the tractor would start, but would not rev. After some research I changed the fuel filter...

Hi. I have a Ford 3000 and recently, the charge light stays on when I start it. It will eventually go out, but it is taking longer each time and I have to increase the RPMs to almost wide open...

How do you replace the filter in the power steering pump? There is a spring inside that is making it difficult to reattach.

Hi Everybody, My new-to-me '73 Ford 3000 started leaking rear-end hydraulic fluid after a bit of use. It has gotten worse every time I use it. Great... After looking around these forums I am...

I have a Ford 3000, and I have broken the draft control (touch control) arm off while backing. I need to replace it since I cannot raise and lower the brush cutter without it. I have searched for...

I'm new to tractors and don't want to mess mine up(1965 Ford 3000 Diesel). But I have a leak from the real PTO seal. From what I can figure out you need to do the following to replace the seal...

I may be purchasing a 12' Befco cyclone flex batwing finish mower to use with a Ford 3000 gas tractor. It uses three single acting cylinders to raise the three decks. It requires the tractors...

I hauled a dead 3000 ford to the scrap yard. But I kept the front end loader brackets off of it. This is Old School factory Ford where the brackets have a tray underneath the tractor and a...

I have a ford 3000 tractor, wasn't used during the winter. I started it early spring. the fuel pump was leaking gas from the weep hole on side of fuel pump. I ordered new pump, installed it. the...

My hydraulics have been acting up lately. The problem i'm having is when i'm using the hydraulics after a long time period of use. after awhile the cylinder speed starts to slow down and then just...

We have a 1974 Ford 3000 diesel that has a bent muffler. Got too close to the trees and it bent the muffler down some. The pipe going in to the manifold is still straight, it's just bent at the...

Hey there! I picked up a new to me 73 ford 3000 diesel that has been well taken care of and in great shape. Up here in Montana it's been cold (32 down to -20) so I'm mostly using it to plow...

Bought a Ford 3000 diesel in 05 with a loader and have been working it during the summer months every since, mostly mowing 8 acres and moving gravel for the drive. It has always had a knock that...

Rebuilding the lift on my 71 3000 and just finished the two lift adjustments as outlined in the IT manual but not real confident they are correct. First adjustment is in Draft control and you...

Wanted to see if anyone could answer a question I have related to the hydraulic piston pump on a ford 3000 (1965). It started when I went to prime the pump and loosened the priming plug (part 37...

Does anyone know where the drain plug is for the rear hydraulic fluid is on a ford 3000 Shepp

Posting this here instead of ford forum just for fast answers. Got a ford 3000 that I'm trying to find the differential lock. Renters just bought it this weekend and it caught fire but I need to...

The people who lease part of our land just bought a ford 3000 and we're brushhogging and I guess that battery blew up and caused fire. Most likely I will be doing repair to it but was wondering...

I was given this tractor from my uncle who inherited it from his father. my Uncle already has a kubota and a skid steer. He said the last thing he needed was another tractor. Anyway i'm not to...

I replaced the original front tires on my Ford 3000 6 years ago with a multi-rib implement tire (which is basically what was on it originally). These "new" tires tear up the grass when turning...

I have owned my 3000 for over 20 years and the seat looks pretty nasty. I bought this tractor with a fresh overhaul and probably only ran it 250-300 hours before the steering box went out. Tractor...

Over the winter I am going to pull the lift cover off my 71 Ford 3000. The lift doesn't go all the way up with a load but will with nothing on the 3pt. I really have no idea what may be causing...

Hi, my name is Ben, im 21. I recenty purchased a 1974 ford 3000 gas with 8speed transmission. It came with the orginal manuals, a ford 771 front loader, bale spearand front bumper for 4500...

So, the tachometer has been jumping and I tracked it down to the gear on the generator. Until now all I know is the tractor starts and the battery charges and everything does its thing. But now...

The lift would drop some during bushogging but sometimes stay but it worked good enough. So while I had the tractor drained to replace a PTO seal. I cleaned the extremely dirty mesh filter and...

Thanks to Soundguy's great write up I was able to replace my PTO shaft seal. Due to poor reading comprehension I broke what I thought was a split ring that I was supposed to remove. I am unable to...

My 1966 Ford 3000 gasser has spit out coolant ever since I bought it three or four years ago. Not a lot, but not a little either. Probably a gallon every six hours of run time. I changed the...

So I've got this Ford 3000 tractor that is doing some good work for me, but was thinking about putting a winch on the front to help with all the log moving and pulling I've been doing lately while...

We just replaced the dual-stage clutch on our '69 Ford 3000 gas with 8sp transmission. We decided to replace the clutch because we couldn't get the PTO to engage. The new dual-stage pressure...

We just replaced the dual-stage clutch on our '69 Ford 3000 gas with 8sp transmission. We decided to replace the clutch because we couldn't get the PTO to engage. The new dual-stage pressure...

hi my question is i run a 4ft finishing mower behind the 3000 but it doesnt lift very high of the ground ,,now some years ago i messed around with the top link drop down bracket and then turned...

I am looking at buying a Ford 3000 for brush hogging 5 to 15 acres in N. Texas area. I was wondering if anyone has any information pro or con on the tractor? What should I look for when I look at...

I'm having starting problems. I'm looking for an electrical wiring diagram for a Ford Model CA213 C., 3000 series. How many permissive switches are there?

From a local Craigslist ad-- she looks pretty beat but that cab is very interesting! Has anybody seen one of these cabs? I wondered if it was home made.

Hello everyone. New to the forum looking for some onsight. I have a ford 3000 gas tractor that I have recentlyrebuilt the engine on due to spinning a piston on the crankshaft a while back. The...

I have split my '69 Ford 3000 gas to replace the clutch assembly and flywheel ring gear. I believe the valve cover gasket alone or in addition to the cartridge style oil filter has been leaking...

Hey all I know there is a lot of knowlegable people out there, hopefully you can help me out. I have a 1973 3000. When I first bought it the hydraulics worked great. Then after sitting for several...

I trailed this Ford 3000 home after having bought it not running sitting in a paddock. I fitted a new starter motor, some fresh diesel, cracked it over and it burst into life. Very impressive for...

Time to move up to more HP and all of the new conveniences of a new tractor. Need to be able to trailer it to 3 different properties for planting food plots in the fall, Bush Hogging in the...

I have a 73 Ford 3000 with a hydraulic pump that wont hold prime. I'm trying to rebuild the hydraulic pump but I cant figure out how to get the oil seal out. I think the pump is a C7NN600Y...

I know I've posted but thought it was time to introduce myself. We are located in north Texas about an hour south of the OK border. We are on 3.5 acres and I have been using the 54" Kubota to...

I'm trying to eliminate any possible suction side air leaks on a Ford 3000 diesel with the single filter/CAV pump. Are there any sources for the metal fuel lines from the filter manifold to pump...

I will be splitting my 1966 Ford 3000 gasser to repair the ring gear. Fifty years of use has the teeth banged up pretty bad. I bought a new starter for it, but saw how bad the gear is while...

I need to get the clutch in my Ford 3000 fixed ASAP, but when I went to order parts I'm getting confused as to exactly which assembly I need. I typically go to Messicks and find the part number on...

Hey guys and gals, I recently picked up a fairly nice Ford 3000, 8sp, live PTO, gasser. Everything works except the gauge cluster. The 3pt is slow and jerky to lift. My first plan is to...

Hi, We have a 1975 Ford 3000 power steering issue. It used to leak out of the steering column seals which where replaced and everything worked OK till recently the power steering stopped working...

I've had an issue with the clutch on my ?9 (I think) Ford 3000, gas tractor for a while, and it's getting bad enough that it's time to get it fixed. It's not a normal worn clutch issue, and though...

My 72? Ford 3000 has several tranny probs, and I could use some advice on where to go from here. It has a hard time going into 1st and 3rd. If I push down on the shift lever, rotate it a...

1973 Ford 3000 unknown total hours. I have put about four hours of run time on this tractor since I purchased it. It has a knock when warm. I adjusted the valve clearance when cold, .015 intake...

How is the idle speed and maximum no load speed adjusted on a 1971 Ford model 3000 tractor adjusted? This has a Simms fuel injection pump that has been refurbished. Rmorgan

My '66 3000 has 11.2x28,will 14.9x28 clear? And will they rob too much power?

hi i am trying to source a starter solenoid for my ford 3000 .it has lugs out the side that fixing bolt screw into.do you guys know any firms that will ship to australia

Recently purchased my first tractor (Ford 3000 W/ FEL) and have used it to plow, disc, rototill and brush hog. Great Tractor!!! Really happy with it so far except that it has no power steering so...

Can anyone advise what type of plug is used on the Ford 3000 cooling jacket, just above the crankshaft at the rear of the engine? I am doing the clutch this weekend and just saw a dribble of...

Have taken head off our 3000 was expecting to find burnt out valves because of chuffing sounds when running but valves all ok, any ideas what noise might be ?

1973 gas 8 speed with power steering. Also has a Ford loader and 6.5 foot snowblower. Good rear rubber. Has a control valve and one set of rear remotes. Haven't tested this, need a handle for the...

I got my first tractor, and unfortunately I have no experience with them so I am asking for input to see if I am merely doing something wrong, or if I have a mechanical problem. Its a 3 cylinder...

hi. just purchased a ford 3000. seemed to work fine at first but found that pto clutch won't disengage. It started life as a selecto speed but now has an 8 speed. Getting ready to split it. Was...

I have hydraulic pressure but no lift.

Hey everybody, just a little question for ya'll. I'm looking at a Ford 3000 tractor and the fellow says it's a 1989 model. I didn't think Ford made a 3000 in 1989. I could be wrong,cause that's...

I blew an hydraulic hose on my 772 loader, I replaced the hose but can't figure out where to add the hydraulic fluid. Any help out there?

Could someone tell me where the fuel pump is located on a 1972 Ford 3000 gas engine? Thanks, Mike :confused:

Hi, I'm Bowman1 and I have been lurking on this wonderful forum for the last few days. I have made a terrible mistake, needed to change out the ignition switch on a Ford 3000 diesel tractor and...

I have a Ford 3000 tractor, built in 1968, 7600 hrs. I just overhauled hydraulic lift cylinder; changed cylinder piston seal and backup ring, and most O-rings. The lift does not stay up; have...

I tried asking this in the New Holland section but no results so I'll try here. When I first got this tractor I changed the small diameter pipe (guessing that's return) and the hydraulic fluid...

I've got the engine apart on my diesel 3000 measured the crankshaft end play and is way past tolerance. My question is do I need a new crankshaft or do they make thrust washers for the thrust...

Removed rear seat stud to fix threads on my Ford 3000. Seat was loose and I thought I'd tighten it up. Now however, the 3 point arms lift very slowly, and will not lift an implement. I am...

Bought a Ford 3000 that seemed to have a bad Simms injection pump. Pump runs tractor but hard to start, governor slow to respond, oil reservoir filling with diesel, low power under load. I...

Will a hydraulic pump from a ford 2600 fit on a ford 3000? Would it be worth it or is the old pump just as good?

Looking for some input on a Simms to Cav Injector Pump conversion on a Ford 3000. Simms pump governor is lagging and diesel is filling the oil reservoir in the pump. The local ag salvage yard is...

I have a Ford 3000 gas tractor and believe the hydraulic and axle fluid is running into the gear box. I seen an old post that said this was possible. Can anyone shed some light on this? Do I need...

I recently purchased a Ford 3000 that needs some new tires. The rears are 13.6-28 Firestone Traction Field & Road which appears to be an optional R1 size according to the owners manual. The...

I'm about to buy a Great Bend 330 loader for my 3000. Just wanted to know if anyone knew for certain if it would fit. Also where exactly would you tie your hydraulics into the pump at?

Does anyone have a diagram on how to remove the hitch cover for a ford 3000?

I have a late 60s model ford 3000 tractor and looking for a front end loader for it. I found a koyker k3 7ft front loader for $2650, it looks like it's in decent shape. How much does it cost to...

Bought this aftermarket remote setup and everything works fine,but it has a little leak out the back. See pics. All the o-rings are there and the bolts are tight. I went to take it off a minute...

I am looking for a tractor to do shredding and other jobs around 60 acres. Does this look like a good price? It is a mid 70's model with shredder and box blade. It has 1800 hours. He would take...

Hey everyone new tractor owner here. I believe I bit off more than I could chew and now I need help. I have a diesel ford 3000 I bought a week ago. The lift arms were slow and would kind of...

Greetings from Georgia, first time poster (I think- no, apparently I now have 4 posts)...I've been a member here for a while and have greedily sucked information for all these years without giving...

I recently inherited my dad's Ford 3000. My dad was not able to use for years prior to his death and then another several years it was just kept unrepaired. It does run good and the 3pt works...

I have been offered a Quicke 2230 loader at a price I can't ignore. Have been searching around for info but can't find much. Is this loader suitable for my '71 diesel Ford 3000? I'm not looking to...

How do I remove 3rd bolt behind starter next to block? Have removed battery plate for more visual access from above. I've tried positioning socket with wobble extension but there is little room...

Love my tractor & so does my Grandson. Can't keep him off it. Will restore some day as $ permit. Live in Smiths Falls, Ontario, Canada Gary

Ford 3000 diesel 1971 I am planning to do some work on the external components on my 3 point hitch and the assosciated lift mechanism but can find very little help in either the basic operators...

I have just resolved my starting problem as a direct result of advice received from here. My solution brought up some things I haven't seen here before so I thought I'd write them up in case they...

Have done a search but not found any helpful info. I have a 1971 diesel Ford 3000 that ran to a halt one day shortly after starting after a break of about a month from previous use. It is a...

My PTO stopped working...so, I removed the PTO shift lever and cover to find that the PTO Shift Arm is broken (internally) and the shift lever isn't turning anything -- thus the fork isn't sliding...

Looking at a 1975 Ford 3000 Diesel with a Bush Hog attachment. She has the 8 speed tranny, and is purported to be in "Excellent Shape" with everything, including the lights in working order. I...

Looking at a 1975 Ford 3000 Diesel with a Bush Hog attachment. She has the 8 speed tranny, and is purported to be in "Excellent Shape" with everything, including the lights in working order. I...

Hi all, I just bought a Ford 3000 Tractor I think about a 72 model. This is my first tractor and not 100% sure on all operations, but have a good understanding of engine, electrical, and...

I'm looking to put a loader assembly on 1967 Ford 3000. Where can I find a list of which model's will fit?

I have a 1969 Ford 3000. The swing out battery box has been completely disassembled. Does anyone know where I can get instructions on how to put it back together?

Howdy from Texas and longtime lurker here. Recently bought a 196? Ford 3000 diesel. I have the owners manual and shop manual. It is my first tractor and so far I have enjoyed shredding and box...

Hello all. I have a line on purchasing an old Ford 3000 tractor. It currently does not have a front end loader, and I'd be interested in adding one to it. Problem is I don't know which would fit...

Hi, I bought this tractor at an auction this summer and has always been hard to start. Usually have to use starting fluid. Once it is running seems to go good. I have done some mowing and tilling...

Hi I'm new here! I fitted all new brake shoes and springs on my ford 3000 diesel (drum brakes) I have adjusted them as per manual so everything seems ok but when braking the camshafts are moving...

What kind of lubricant is recommened in injection pump?

Hi everyone New to the forum. Everytime I looked up something I seemed to be directed here so thought I would join. Anyway, recently purchased a Ford 3000 diesel. It has one hydraulic auxiliary...

anybody have experience in fuel coming out of the weep hole in a gas ford 3000 fuel pump. it is a drop, squirt every second or so? what does this mean?

Hey Guys I have a old Ford 3000 that will crank but not start. The one thing I noticed is it seems to lurch forward when attempting to start the machine. I figure it must somehow be partially in...

Hi all. My first question. I have searched the forum but can't find the answer either here or in the manuals. I have a late 71 diesel Ford 3000 with live PTO. I have a pipe coming out of the...

I put a deposit on a Deere 2155 Monday that I saw on craigslist to replace my faltering massey 135 gasser. Yesterday I see a ford 3000 with 6ft bushog brand bushog(huge gear box, nice bushog) for...

I bleed the injectors and get air. The tractor will then start but only run for 10 to 15 minutes. I bleed the injectors again and get air. Seems to be sucking air from somewhere but I cannot...

I have the service and owners manuals, they are not helpful I have do not have a zerk on either front wheel, I have a variety of zerk sizes. I tried to thread in two different sizes, could not...

Hi, hope I can solve an issue with a 3 cylinder gas ford 3000. I bought a new coil and cap plugs but still no spark at points. What the heck. Does anyone have a diagram for the key back to the...

I have a friend's Ford 3000 and while I was mowing the other day, it popped and mower deck quit running. I checked the mower deck, no problems. With the pto in gear and running, I could grab the...

What kind of sockets will I need to have. This is my first farm tractor. Is there a good list of general tools I need to pick up for maintenance that I probably don't currently have? thanks

Ford 3000 price check Hello very new to tractors and farming. I'm looking for some advice on a ford 3000 tractor. I have 6 acres with a Lot of it that needs to be cleared. I will have 7000 sq feet...

Hello very new to tractors and farming. I'm looking for some advice on a ford 3000 tractor. I have 6 acres with a Lot of it that needs to be cleared. I will have 7000 sq feet or so of snow to...

One of the power steering tubes from the steering column to the right hydraulic unit broke. I had a new tube made at a local auto shop and installed it. The reservoir was refilled with fluid...

Hi, I have recently bought a 71 Ford 3000 tractor and I am having some problems with the 3 point lift. It operates fast enough but is weaker than normal I think. When lifting and lowering it...

Hi everyone I've got a 76 fd 3000 diesel that I've had for about 15 years the bad thing is it doesn't have pwr steering and the older I get the harder it is the steer. At one time I looked at...

I have been running the PTO a lot this season, brush hogging and cutting/harvesting hay. Now I am leaking hyd fluid at the PTO output shaft. Probably a quart when parked overnight. Bought a new...

As the title states, it's leaking hydraulic fluid from the shaft that the clutch pedal actuates. I can't find anywhere in my factory manual that covers this. What I'm looking for is information...

I'm new to this so I'll do my best. I have 66 Ford 3000 diesel, light switch shorted while mowing, now electrical is not working at all, do get power to the starter solenoid spins when I short...

I have a ford 3000 diesel tractor. When it is in gear, it has a whining or grinding noise coming from the tranny/rear end area. Sounds kinda like a steering pump when its going out, or maybe a...

Howdy folks - my second post here. I posted this in the 'Hydraulics' section but then realized it may not be the appropriate place since most of the issues there seem to relate to newer tractors...

The power lift on my Ford 3000 gas was weak and jumpy so I checked the oil in the transmission it was over filled and it looked like chocolate milk. Since I did not need it I let it set for a over...

Hello, I bought a new water pump (P/N EAPN8A513F front pump only) that apparently should fit but the impeller hits the back housing. I figure I'll get the entire pump including the back housing...

I have a "new to me" 1974 Ford 3000 Diesel that I can not get started. It ran well and always fired up when I first got it. I had it about a month and was driving it when it shut down. I later...

Tried to use the post hole digger on my 1970 Diesel Ford 3000, The auger went down to China and the tractor did not have the hydraulic power to pull the auger out of the hole. Also I discovered...

I am a new member and it has been years since I have done much tractor work, dates back to the 1970's and was related to several 8N Fords that I owned. Now I have questions about our 1966 Ford...

First post!!! :) first off THANKS so much for this site! It has helped me rebuild a 1954 Farmall cub complete engine overhaul and bolt to bolt restoration! Now last week the guy I work for out me...

While installing a Ford front end loader on a '66 3000, the shaft that drives the pump does not line up with the hole in the axle. I bolted the hub with the spline to the crankshaft pulley, and...

I have a 67 Ford 3000 gasser that won't start. Ran great all winter even in -20 deg weather. Couple weeks ago put it in the barn after moving round bales. Week later tried to start it. It did but...

I am in need of a tractor I can use to mow my 5 acres (3 grass). Originally I planned to rebuild my dads 8N over the winter but found a crack in the block that couldn't be salvaged and am having a...

My name is Dave and I am having an overcharging problem with my neighbor's Ford 3000 3 cyl gas tractor. It is a 1965 Ford 3000 with Lucas type generator and we have done everything the incredibly...

Was using my 3000 to fix a rutted driveway and when using the loader with some down pressure to back drag, the drive coupler and pump shaft gave up the ghost. I had already backwoods...

Hello, This is my first time to post to the forum. I recently purchased a 1974 Ford 3000 Diesel tractor. It was missing the lower grille and associated hardware i.e. grille knobs, studs and...

I have been looking for a 2 row tractor to plant a little corn (<4 Acres), I currently have a Kubota L3200 4x4 that I have been using as a 1 row. I ran across a Ford 3000 that has the Gas engine...

There's a local guy with a broke down Ford 3000 with an FEL selling his. I'm hoping I might convince him to sell his loader separately.

Hello everyone. I hope this is the right category for this post! I recently bought a 1968 Ford 3000 diesel tractor. The generator wasn't charging when I got it. After troubleshooting it and...

We have a hydraulic pressure nut kit for installation on a Ford 3000 tractor. The hydraulic pressure nut is to be fitted to the hydraulic pump. The kit contains: a] The Nut; b] The black rubber...

I have a Ford 3000 with front end loader(Ford 771) . When I purchased it a little over a year ago I noticed the radiator was leaking from the lower nozzle. I pulled the radiator and had a new...

Would anyone know how I can get the leaver in to work the slasher, without starting it in the position first which drains the battery, I have to charge the battery first as it drains it so fast...

How do the pieces go back in the canister for a ford 3000? Talking about the spring mainly. It fell out when I removed the canister and don't know where it fits. Thanks.

Looking for Ford 3000 workshop manual

While reminiscing of spring, I found this video from last March when we tilled up some new ground for a new garden site. You can see our fruit trees in the background. This is the 60" King...

The small rigid tubing on my Ford 3000 is worn out where can I find one

I drove by a Ford 3000 2wd, power steering, and some mismatched yellow loader on it. Stopped and got the phone number off it. I noticed the loader was powered by a front auxiliary pump. Is...

I am starting a thread that i have never found. what size snow blower should i run on a ford 3000 it is an 8 speed two stage clutch. There will be alot of drifts for it so i dont know what is...

Guys, I need some advice. I have replaced a power steering cylinder on my Ford 3000 twice and both times it has blown the retaining clip out of the end and as a result the packing comes out...

I have a ford 3000 with a leak of a drop of diesel per 20 seconds coming out of the unit where the throttle hooks up to, as well as a dead battery. I have not started it since winter started and...

three temp options for 3000 tractor gas engine which one is best? 168 172 or 188 I use tractor for small jobs and plowing driveway in winter. thanks

My ford 3000 "I believe 74 model but not positive" has been leaking an almost clear fluid so today I took the shields off to see that the fluid is coming from the gear box cover on the right hand...

Well i have a ford 3000 which i know diced the rpm gauge is not working it will spin all the way to 2600 rpm once the tractor starts and doesnt seem to matter where the throttle is. is it as...

i have a 1969 ford 3000. when i bought the tractor it had a little bit of brakes on the left side so i pulled into it and found the axle seals were bad so i repacked the bearings replaced the seal...

I have a ford 3000 with a three point that will raise all the way to the top even though the lever is only 3/4 of the way up but below that works properly and no the draft control is not on. any...

I would like to know if anyone can tell me what size belt and what power steering fluid goes in and on my tractor.? I just purchased it last week.

G'day guys. Since my parents bought the family farm in 1986 (vineyard) we have had an old ford tractor. I believe it to be a 3000/2000 from 1965-75. Mum has since upgraded to a new tractor and...

G'day guys. Since my parents bought the family farm in 1986 (vineyard) we have had an old ford tractor. I believe it to be a 3000 from 1965-75. Mum has since upgraded to a new tractor and just...

I have a 1970 Model Ford 3000 (diesel) that has recently started smoking out the blow by tube. The top mounted exhaust shows little to no smoke unless under heavy load. The hour meter stopped at...

Where can I find a Draw Bar for a Ford 3000 tractor? I live in the Dallas-Ft. Worth Texas area.

Good Fellow tractor lovers, I am new to the forum having exhausted all options to try and get off the transmission main shaft. The challenge is to try and change the front pilot bearing and rear...

New to the forum and been reading everything I could trying to research my tractor I just acquired. Best forum in the world for tractor info btw !! I need help in verifying the year/make/model of...

I am trying to replace the instrument cluster in my Ford 3000. All the packages I see for sale say they are negative ground. My tractor is 12 volt,positive ground. Will they work in my tractor...

I am replacing the instrument cluster on a 1975 Ford 3000 and having trouble getting the bulbs to stay seated in the cluster. I can push the bulbs into the holes in cluster but nothing there to...

Two questions: where is the fuse box on the three cylinder gas engine, Ford 3000? secondly, how do I adjust the carb? Seems like not quite rich enuf...

OK, before I ask the question, get your laughing over.:laughing::laughing: I just bought a 1970 Ford 3000, with a three cylinder gas engine. Looking forward to working it. Here's the question...

Has anyone found a mechanical temp gauge that the bulb with actually fit right in the head of these tractors? I know it's a 1/8 NPT every bulb I see at the parts store is way to big. All of them...

Soundguy, somebody, please help me out. My 3000 is making me pull my hair out. I bought it a year ago and it's constantly something new giving me problems. First the PTO wouldn't stay engaged...

Good afternoon. Anyone have any tips or tricks to make a water pump replacement go any faster/smoother on a '69 Ford 3000? Thanks in advance.

I'm from the philippines and planning to buy a a ford 3000 injection pump. It's hard to find tractor parts seller here esp. for an old model. does anyone know of a reliable website/seller where I...

i want to check the hydraulic fluid level on a ford 3000 it has a loader that is ran with tractor pump and resivour

Guys, I've got a steering fluid leak and I think its coming from the sector arm seals. Is there a way to get the seals off the sector gear shaft without taking the shaft out? I've got the...

We have a '65 Ford 3000 diesel that seems to go through a starter motor about once a year. It is used to pull the manure spreader through a stable, stopping in front of each stall to clean the...

I've got a Ford 3000 gas tractor. Parts store sold me a fuel cap for a 3000, but is says for a diesel. I dont think its vented. Will this work? Tractor not running right now for other reasons...

I have a 1969 Ford 3000 gas tractor with about 2410 hours on it. The tachometer recently stopped working. I pulled the gauge cluster, disconnected the tach cable from the tach and started the...

Hello: i have a Ford 3000 diesel that starts fine, but when it gets on a hill she slowly loses rpm and acts like she is running out of fuel then quits. After I roll back down the hill I can start...

My father has an older Ford 3000 that has no brakes...lhe has never looked in to rebuilding them, but I imagine it can't be that hard. What is the best place to start when diagnosing and...

tractor has been sitting for awhile, started it up and lift quite working

New guy with a towing question. I am looking at a 2004 Chevy 2500HD with the 6.0 liter gas engine to tow a Ford 3000. Ballasted weight of the 3000 is roughly 7000#. GVWR of the 2500HD is 9200#...

I have a 1974 Ford 3000 with mfg. powersteering. The tractor will turn to the right on it's own, but when you turn the steering wheel back to the left, it feels like it is locking up. But if you...

Hello everyone. I was just curious as to where I could find a front loader for our Ford 3000? I've done some research and people have said its not the best tractor to have a loader on but it won't...

The other day I was starting the tractor and it was turning over hard. Then while cranking the engine there was this loud & distinct "pinking" noise. Almost as if someone stuck a piece of steel...

Hello all. I'm new to this site and I'm not sure if this is the correct area to post this question but I recently bought my first tractor a 1974 Ford 3000 gas with a loader and I couldn't afford a...