Just got my old b2650 back from a relative after about 15 years and want to get it back in improved shape. Seems to work fine about 400 hours on it. When I push in the clutch when it is running it...

Okay so another "cool" deal I found on a B2650 but it doesnt have 3 point arms and drawbar. I asked my local Kubota dealer and he says $1500-$2000 to add them. He also forwarded me to Weaver's...

I am looking at a used B2650 from a dealer and it doesnt come with a loader. How easy(or hard) is it to add a LA534 loader to it ?

Hi I'm looking at 2 used Kubotas with same pricing $15900. First is a 2017 B2650 with 507 hrs and the second is a 2016 B3350 with 248 hrs. I have a 3 acre property and I believe(based on reading...

I'm sure this question has been answered a million times. I have a 2018 KUBOTA B2650HSDC CAB TRACTOR that I purchased new and after starting it and for any reason shut it off it will not start...

My Kubota B2650, 2016 year suddenly shut down while driving along. Still have ignition redlight and glow plug light on dash, nothing else lights up I checked fuses and as many connections as...

Hey, I purchased a B2650 and while I was towing it home the cab roof blew off on the highway. Luckily the roof never hit another car or caused an accident. While loading the tractor and...

howdy, i have a b2650 with a LA534 front end loader. i am getting mighty tired of almost rolling this thing daily when i have my front end loader on, (with and without my bucket). I have a belly...

I have a Kubota B2650 with backhoe. I hadthe dealer add the third function for a grapple. The dealer set it up so that I have to use the backhoe connections to run the grapple. If I want to use...

Kubota B2650 - 200 hrs Last week The tractor was running fine. I was moving snow for about 3 hrs, and it sputtered and died. Wasn’t out of fuel. I figured there could be moisture in the fuel so I...

My neighbor has an L3901 and it's bigger than my B2650 no doubt. When I was attempting to look up the specs on it from TractorData.com, it shows my 2650 has a greater rear lift capacity. I'm...

I have had a B2650 for almost a year now and love it. I saw a Facebook ad this weekend for a LX2610 that had all the things I knew I wanted in the future. The tractor had 37 hours, loader...

I bought a used B2650 with a 60 inch mower deck it seems to work fine but today when i parked on a cement floor i measured the front of the deck and the rear and the rear of the deck is lower than...

I have 291 hours on my B2650. Love the tractor. But recently, it has picked up this not starting thing. I go out to turn the key, sitting on the seat with the parking brake set, and the dash...

I have a 1999 b7300HSD with a B2650 front mounted snowblower and I also have a LA271 front loader. The snowblower subframe is not the frame listed in the service manual and instead mounts...

I had posted to the forum several weeks ago about the fuel solenoid shutting the engine down when I tried to engage the pto. I was going to update it but could not find it. Anyway, I finally...

If all you want is more HP is the upgrade worth it? I bog down mowing on the B2650 when i am out in the field mowing with it using the belly mower raising the deflector shoot helps. The grass is...

I bought a used B2650 with 200 hours on it. I am having issues with the mount of the mower. If i hook up the mower the way the book says the front linkage will lift the front on the mower deck off...

Rear wiper blade on my wife's 2650 is falling apart, but OEM replacement is nearly CD$50! Can I just buy an SUV rear wiper blade of the same length?

By loaded i mean filled tires a snow blower on the back and a plow on the front. With the extra weight it seems to struggle going up a slight hill when in M gear with the implements up.

How do I tell if my wife's B2650 has a block heater? If it does have one, where would I look for the plug? Bob

I cannot switch my PTO from rear PTO to mid PTO. The lever is stuck/binding. I have tried engaging the rear PTO and then trying change the selector lever and still was not able to change to the...

Hello everyone. I‘be joined this group as a recent purchaser of a 2019 Kubota B2650 ROPS. The tractor has 330 hours on it and was a part of a package with a FEL, B2728B Snowblower, BH77 Backhoe...

Title says all it's on flat ground but the grass is thick and over the hood of the tractor.

The right side axle bearing failed allowing the pinion to ring gear mesh to change and wipe a couple teeth from the ring/bull gear on the 2018 B2650. So while the dealer has it under warranty...

I'm wondering if anyone else has flipped the front tires side to side to widen out the stance? Everything seems to clear and it looks a lot better but didn't know of there have been any long term...

So I got my backhoe installed on my Kubota B2650 a month ago. I am thinking about adding a rear remote to use when the backhoe is not installed. My question has to deal with the type of spool...

hi folks..those that were following my story of Kubota not starting..thank you all for your recommendations. I was always told...look for the simplest problem first.. well, i never do that...

hi folks..those that were following my story of Kubota not starting..thank you all for your recommendations. I was always told...look for the simplest problem first.. well, i never do that...

I'm considering getting away from my Husky 52" ZT and putting a 60" MMM on my B2650. I don't have a huge area to mow, and in fact much of it is better served by a zero turn because of all the...

Hey guys, I’m having an issue and would greatly appreciate any help or advice. specs: 2017 Kubota B2650HST with LA534 loader. 632 hours. shortened version: If you lower the boom until it’s...

I own a 2017 Kubota b2650. Been having problems with the neutral switch on the hydrostatic pedal. Tractor would not start until you jiggle the pedal about five times to vibrate the switch and then...

I have a 2015 B2650HSD, front loader, 3 pt on rear, that I am planning on adding extra Hydraulics too. A few questions - do the kits from Landpride and Kubota come with any instructions? I...

I sold my B2650tlb and the new LX2610tlb will be ready this next week. I had “guessed” that the fel on the LX2610, LA535, would have more lift than the LA534 on the B2650. According to...

Hey folks, When greasing up the tractor, the manual indicates that there should be a zerk fitting on the treadle pedal where it mounts to the shaft, but for some reason, my B2650 does not have...

With the loader valve body cleaned and lubed, tractor warmed up, I find there's almost always a little "hump" to push the lever past, however firmly i hold the lever, as i move it left or right to...

Are the rear tires on a B2650 tubeless from the factory? I have a leaking valve stem and I was curious whether I just needed to pick up a valve stem or a whole tube.

My new LX3310 has the most annoying high pitch buzz/rattle from the hood latch at idle, i have tried for 3 days unsuccessfully to quiet it. I have pressed the mounting flange together a little to...

Hello, Recently inherited a B2650 Kubota with full enclosure. The only accessory is the 63 inch snow blower. Bought in 2015. The tractor has 55 hours on it and resides in northern Michigan USA...

I met a guy that has a B2650 Kubota with cab & snowblower. The snowblower is 72" . After reading I have done this snowblower is by no means the right size for this tractor but the owner insists it...

Mine is a HST and using a belly mower what RPM should you mow at? I've been at 2,300-2,500 if a little more power is needed.

Need to do an oil change on my B2650. There are 2 threaded caps on the top of the engine that have "oil" embossed on them. Are they both used for refilling the engine oil? Any advantage to using...

Greetings from a hobby farmer from Virginia Beach, VA!....TBN...Best resource on the internet by far.

Hi all, Has anyone replaced the air conditioner belt on their B2650HSDC? My belt broke and to reinstall the new one, it needs to go around the shaft going to the radiator fan. So it looks like...

The Kubota website is finally listing retail prices on the LX series (build my tractor). When doing a comparison between it and a similarly equipped B2650 the dollar difference is a bit over...

I was running my B2650 with rotary cutter this afternoon and ran into an overheat scenario. It was very dusty where I was working in a field, I as taking down some saplings as well, maybe 3 to...

I have been using Shell Rotella T6 15-40 in my 2650 since the first oil change. I haven't been able to get 15-40 in quarts only gallon or 2.5 gallon sizes so when I do an oil change I always have...

Hi all, I'm looking for a front snowblower for my B2650 cab. I realize the B2782B 63" version is a better match for my B2650, but wondering if anyone is running the 51" B2781B version and if it...

Long time member,not many posts. I want to upgrade my 18 year old Bx22 to a cabbed tractor. Was looking at B2650 or 3350. The B3350 was a no go due to history with emission problems. The Lx looks...

Like to hear your pros and cons on B2650 with front loader rear tire chains and loaded tires. Tractor use will be light dirt work and some snow removal. Thanks.

(Prospective buyer) Does the B2650 have glow plugs? And if so, how are they activated for pre-startup warmup? Thanks.

After some trial and error I finally came up with a mount for the light bar that I think looks factory. Started with 1x3 square tube, 17"x6.5" 1/8" steel plate for the amber light mount and a...

Was out snow blowing with front blower and put pto lever in off position , blower stopped , got off seat and tractor stopped and wouldn't restart when i got back on seat . I had to play with the...

I had a 2012 Kubota L3940 that I recently sold so I've been on the looks for a new tractor. I have will be using it to maintain my driveway it's pretty long put in about 1 acre of food plot. I...

I need a smaller tractor bigger than a BX on my 40-acre homestead and out on the farm. The BX's I have use have too little ground clearance, tires are too small for a pasture, and they lack...

I bought a B2650 this year with a loader, mid-mount mower and a snowblower. The snowblower has the hydraulic spout rotation. The manual to the blower says like I was expecting, that up and down is...

I did a video showing what you need and where the parts are to easily adjust your HST pressure to the loader circuit. I had been asked multiple times to do this, so I was tweaking mine and made a...

Hey everyone. I had some hydraulic work done recently on my B2650 and since I got it back the idle speed sticks too high after being at high idle speed. It self corrects itself after a few minutes...

As expected, the new LX3310 is common rail injected. This should eliminate the regeneration issues that so plagued the B3350. Cab models have LED work lights and optional air ride seat. Both...

I have been having trouble with the safety switches on my treadle and also the seat switch. With the PTO's disengaged it will kill the engine if I go up or down a grade or even shifting my weight...

I've got a year and a half old B2650 with just under 400 hours on it. Last Thursday I heard a metallic ringing sound, so I opened the hood and restarted the engine. I found that the weld on the...

Today my wife decided to bush hog the back pasture while I was doing some welding on her father's trailer. She will not back it up, but she mowed about half of the 5 acres. I posted pictures of...

Finally sold my BX23. Thinking about ordering its replacement tomorrow or early next week. The plan is: - B2650 HST ROPS - FEL with SSQA, 60" bucket, LP forks - Third function for future grapple...

I have a clean 2014 L3940 hstc with loader has full cab with heat and ac I did a even trade for the tractor for my skid steer. I own 8 acres and would do light loader work and maintain my driveway...

Trying to check my radiator fluid level and i can't get the radiator cap off!! You turn it it releases but will not come off. I'm scared i could brake off the radiator top since it is only...

Got tired of cleaning soot off FEL from engine exhaust stream. Made the following mod: Cut off about 1.5" of existing exhaust pipe (after removing spark arrester @ end); Cut down a standard 1 1/4...

I have a newly paved driveway and need to get a cabbed tractor ( still wrestling between a B & L series ). I want to know if the smaller B2650 would make it up this hill which has a 16 degree...

Small question is there a fuel shute off valve before the filter so you can turn off fuel when changing filter . Or do you have to train the tank.

Guys, I know that there's been a million questions on R1s, R4s, rim sizes, etc and perhaps i can help. Due to a small mixup in shipping, my new B2650 arrived with R4s on it when I ordered R1s...

Guys, I purchased a new Kubota B2650 a few weeks ago and immediately installed an upgraded alternator to replace the under-powered dynamo. I took some time to create a how-to video and I finally...

Guys, Do any of you have experience with the pin up procedure of the MMM to hold it up while using the 3 point??? I tried to do it, and quit after about an hour of twisting, reading, and...

Hi - My previous Kubota B7500 hst with non-foldable Rop I had for 18 yrs. I kept it in my garage which has a standard 7' x 9' garage door. I could have left it outside but the kids in the...

I've been reading analyzing and test driving tractors in my area for the last year. For my uses and what I consider a comfortably sized machine for me and my purposes, I want to buy a B2650...

One of the jobs I want my tractor to do is pull a 5,000 lbs (29 Foot) travel trailer into the woods to our camp site in the spring/early summer, and then back out in the fall. Slight grade to the...

Guys, I know that the B3350 comes with larger, wider R4 tires than the B2650. My question is, are all the other tire options such as the R1 also larger on the B3350? I am also curious to know...

Guys, I have 13 acres of mostly woods and just enough grass for a push mower (no tractor mowing needed). The property has lots of water issues and trails that need constant maintenance. I also...

After looking and with a lot of advice from this forum I went with the 2650. Tomorrow I'll put her to work.

I'm looking for some advice as I'm looking to pull the trigger on a new tractor purchase this weekend. The main task will be finish mowing 10 hilly acres, then some occasional brushhogging and...

Been debating for some time now between a B2601 and a B2650. Currently have a BX23 that I use for mowing, loader and backhoe work, nothing else. But I'm finding I need more ground clearance, more...

Just recently ordered a B2650 open station, 60 inch bucket, the BH77 backhoe with 16" bucket and thumb, 63 inch front mount snow blower, and some PFL3048 forks since apparently they were cheaper...

Spent some time looking for a small utility tractor and decided on the B2650.Took delivery yesterday afternoon. So far it looks like it will fit what I need- spent some time in the wood yard with...

Was looking for a way to get a bigger bucket whit out going to big .Saw this on and had to make one of them spill gard I love to fabric my stuff I hate paying for shipping and waiting .This is...

We added mods to my B2650 today to help protect the underside as much as possible since we are in extreme conditions (Post Hurricane Michael Cleanup) I don't normally talk on videos so excuse...

I want to replace my 1969 David Brown 780 that I've been using for nearly 20 years mostly for snow removal using a five foot rear snowblower. The DB 780 also has a FEL. I have only just begun...

We traded my B2601 for a cab B2650 a few weeks ago. Already had to do the 50 hour service........ I have worked it HARD. Hurricane Michael cleanup is wild. I LOVE my B2650! Take a ride with me...

Am looking to by a box scraper I see every one using a 5 foot wide on the b2650. Is a 6 foot to big for a B2650 or not .If you get a 6 ft that is the same wait as a 5 foot is the 6 ft still too...

I have an old 60" rotary cutter with issues that was given to me with the property and rather than put money in it I think I'd rather buy a new one but I know very little about them. It will be...

Hey guy am trying to find the number for this pump .One of the valve was not working so I found out it had water in it and was frozen so I used a heat gun and it working now .Am just trying to...

Anyone know what BCI group size will fit a B2650? Looks like group 51 to me.

My rear pto located up when using for the first time since last winter by locked up I mean I engaged the rear pto then it just locked up and killed the tractor after it was spinning for a few sec...

My seat spins side to side on my B2650. It doesn't move a lot, but enough when you are riding it that it is irritating. Is there a way to tighten it down? I looked and all I see that holds it is a...

Only 70hr one of my bucket top cylinder pin is very lose is this normal. Try to see if it just the pin or the cylinder hole that has used up. Any one else had this happen am going to call my...

So I blew a fuse hooking up some external lights and bought a box of new fuses but they are larger. I'm guessing the B2650 uses mini blade.

Did a search there a lot of post about adding lights to a B2650. I'm looking for some type of mount so i do not have to drill into my ROPS, i don't have any scrap laying around or anything to use...

Is there a reset button for the oil reset light on the Kubota B2650? The oil pressure light came on. Oil is at the correct level now Do we need to turn off the light...or look for something else...

Anyone else have there battery die in only 3 yrs? Mine still works but it's slow to turn over the motor. No way it will work once it get's cold. I keep a trickle charger on it in the winter.

If someone here has an L4701 with the BH92 Backhoe, could you tell me how high the top of the BH92 is for travel/parking? I'm trying to figure out how high of a garage door I would need. Would...

Has anyone bought an old sickle mower and put it on a newer compact tractor? I would like to find one to put on my b2650 to mow along the creek banks where it is to steep for a tractor. It looks...

Is there a kit from anyone to add hydraulics and hardware for a complete top and tilt kit for my B2650? Or do I need to piece and part a kit together?

I mow my father in laws 4 acres every 4 weeks or so with my B2650 HST, and instead of trailering it 4 miles I just drive over and do the job, and drive back to my home after. It takes as long to...

I am planning on buying a Kubota B2650 ROPS, for the life of me I can't find any pictures of how the hydraulic valve, levers and couplers are mounted. I can find pictures of just about every...

I've got 120 hrs on mine and the filter is dusty do you guys wash your filter or simply blow them with compressed air? I have been using compressed air to clean off the radiator from the inside...

I've noticed this only 2 times in the past, in cooler weather, while working the tractor hard. Normally if I stall it out while consistently keeping the engine under a heavy load and bogging it...

Just took delivery of my B2650 on Friday. I spent a lot of time and research before landing on the 2650 and am very happy with the tractor and it's abilities, think it's going to be perfect for...

My book says to change the engine oil at 50, 200, 400 hours and so on. Messicks says 50, 100, 200, 300. Who is right?

I'm considering the B2650 as my first tractor. We have a few acres of flat open terrain, 2 acres used for horse pasture. Also looking at a Kuhns compact 205 hay grabber (4 small squares, flat Or...

I have a 2650 with 10hrs on it. When I got the tractor, I was using a front mount snowblower on it. When I would scroll through the display to get to the mid pto screen, it would display pto...

It's my issue related to the size of the mower deck, or the slope of my yard? I'm pondering selling/trading this FDR2572 for a 60", but if I'm not going to see a serious change in performance...

B2650 HSDC turf tires w/ extended warranty. 190 Hours. Purchased 2016. Extra set of AG tires on the rim. BH77 Backhoe B2366 Quick Coupler LA534 FEL/B2356 60" bucket B2376 Forks B2741 Male...

A while back I posted some pics of my tool - chain box I fabbed up that mounts in the existing holes on the loader frame. Recently I had a guy PM me about making a set, left and right for his new...

A neighbor is asking me about removing some white oaks that he had cut, he wants the root balls removed, not ground down. I implored him to call in a tree grinder guy, but he says that he's done...

Hi guys, first time posting to any sort of forum & I have a few questions and concerns regarding a particular tractor (B2650) . I can't find a "hands on expert", aside from all the dealers who...

I have been wanting a rear view mirror for my tractor. Looking at what most people did, the most common place to mount one on a rops machine if the front loader frame, which is a good place except...

The question... I saw no mention of an HST screen like what my old BX25D had in the rear axle hydraulic system. Does the spin on suction filter replace that screen, or is the screen there and...

Got a new tractor b2650 like to instal a radio cd player am looking for the wire diagram for the plug.If any one can help me out that be great

I've got a line on a really nice (used) FDR2572 finish mower a couple hours away and I made the deal to go pick it up tomorrow (Friday) evening. My only concern is that I side slope mow my...

Have any of you B2650 owners had a problem with the PTO gear selection? My new machine (10 hours) has three selections....viz, Rear PtO only, Mid PTO only and both. Currently my shifter is...

I'm still doing research etc, but leaning toward purchasing a B2650 in the next month or 2. Clearing thickets off a couple acres of our 10 is a priority and I'm thinking I want a grapple. Just...

Woot - I just signed up for a new B2650; should be available next week.. I've been waiting for a deal as good as I saw last June and I didn't quite get there - but very close. B2650 & 60"...

Well I decided on some Duo H chains for the B2650 and put them on today a don't have enough clearance. So obviously I need to get rear wheel spacers, anyone know what exactly I need to get? Also...

I was moving some brush around the property today. I ran over a small stump (the stump was free, already dug out) and it struck the suction filter. A few minutes later I noticed fluid puddled on...

Looking at getting chains for the B2650 as using the fel for snow removal. I have the AG tires and worried that ladder style will get lost in the tread? Any recommendations or experience would be...

I have the WSM for the machine, but if it ever discusses the amperage/wattage availability of the charging system, I'm missing it. I'm trying to learn what the charging system puts out, and what...

Hi Everyone! I don't post much, sorry! Not even sure if the photo's I attached are going to show because I don't know if I did it properly? Guess we'll find out. I have a new B2650 and may...

I made a quick video taking about my new 2018 B2650 TLB. If you have interest, check it out and comment. 2018 Kubota B2650 initial review and thoughts. - YouTube

I bought my B2650 6 days ago, and 4 days ago I removed the backhoe so that I could mount the 3 point "stuff" and hook up to my 72" rear blade to play in the snow. So, the snow has passed and I...

I have a 2016 B2650 cab model. Today I noticed this bracket under the dash on the right side of the steering shaft. It has a couple holes in it like it is supposed to hold something. Does anyone...

The Sunshade is $437 vs the Deluxe Fiberglass is $322. What are the differences, I do not have pictures in the "Build my Kubota" page to help me decide. I think I want to call the dealer this...

I may not survive the next 7 days! My B2650 is officially in the garage at M&R Kubota in Butler, PA. To begin the build. This is a B2650 with 60" loader and 3rd function for a grapple, backhoe...

Okay I am having issues and the dealership has not been able to figure this out either. I have a Kubota B2650 and Snow Blower B2781B. There is a bolt in the side of my PTO gear box that is used...

I am looking for the options of installing a snowblower on the B2650. I have the fel with quick attach and front hydraulics and the BH77. The cheaper of the options will be a 3 point but I have...

Good morning, I'm having a major issue with my 47" front quick attach snowblower. It appears the right auger shaft is not engaging inside the gear box? Due to the age of this blower I'm wondering...

I am putting together a deal on a new B2650HSD TLB unit. The deal is breaking down as follows: B2650HSDBase Price + R4 Loaded $16652 LA534A Loader $3208 B2366-MECH Kubota SSQA Kit $432 B2356-60"...

I have been going to put rear remotes and run lines up to the front loader and run off of one of the remotes for a while now. Being a retired heavy equipment operator, my Kubota dealer, who I...

I was doing my 50 hour service (a little late) on my tractor today. I pulled the plugs on the oil pan and while I was waiting for the oil to drain I grabbed the hanging w/strip off the bottom of...

Thursday I took deliver of my Kubota B2650 to spec. I posted it when we were shopping but here's the list again: B2650 w/cab Carl SR Bias Turf tires Wheel spacer kit 1.5" (just for...

The question is how big of a step up is it in loader/backhoe digging ability when moving from the SCUT BX25D to the CUT B2650? My primary use is finish mowing lawn (2.5 acres) and then the other...

I got the bug to upgrade from my BX25D to something with some more capability. I have owned the BX for almost 4 years and put on almost 400 hours. It has been handy but I want something that can...

Just picked up a B2650 today. Open station, FEL, SSQA, 60" bucket, Turf tires, One rear remote, quick hitch. Bought it from Burke Equipment in DE for 18600. I thought this was a pretty good...

Changed oil and filter and was checking fan belts etc. and noticed a v cut in the lower coolant hose which was quite deep and caused by the belt as it would chatter a bit at idle speed and hit...

I decided to till the garden today, so I installed my tiller on the back of my tractor, pulled out of the barn, and into the garden. I backed up to the far fence, grabbed the PTO handle to slide...

Greetings. We own 5.56 acres of ~1acre mixed Tree's (LOTS of deadfall), unused pasture ~2acres with the mixed trees, and remaining lawn and buildings we are looking to maintain. Also being in...

Hello, I'm in the market for my first tractor and I'm hoping to buy the correct one. I have 2.67 acres that I'm going to do stump removal, building gravel trails, snow maintenance and landscaping...

I am nearing a decision on my first tractor for an 11.5 acre (flat, 10% lawn 90% meadow, .25 mile gravel driveway) property I purchased. I plan to get FEL, MM or finish mower, brush hog, grater or...

Ok so i get a quote from my local dealer(60miles away) on a b2650 cab with 60"QA bucket , loaded R1, wheel spacers, 3rd function valve, landpride 1260 slipclutch bushhog,48" fork set Says 30,304...

So I've been tractor shopping/researching the last few months and I've narrowed it down to either the Yanmar 424 or Kubota B2650. I've looked at other brands including LS, JD, Massey and Kioti but...

I just got my new B2650. I was clearing out the side yard of weeds and little trees. There were some really small stumps sticking up about a foot or so. They were maybe an inch or so wide. I...

Does anyone know how much a kubota grass catcher would cost for the B2650 with a 60" mmm? There is one listed on the kubota website. I've read they are a pain to install/remove what other ways are...

Hi Guys, it's been a long time since I've been on here. My current 2001 B2910 has almost 1900 hours on it, runs fine and the only problem is a hydraulic leak on one of the curl cylinders. I've...

Brand new B2650. No matter how far forward or back I adjust the seat it rocks back and forth even on slight bumps in the field and I can hear and feel the thump repeatedly even over the engine...

Have had my B2650 with cab for two days and compared to the 21year old Ford 1215 I traded in this unit is really loud! Both have the HST transmission. Borrowed a decibel meter from a neighbor and...

I've read both good reviews, and some concerns about Kubota possibly cutting corners on this model. Flex in the floor panels as well as the fenders, etc.. Wondering what the current opinons are...

Like to add a set of mirrors onto a B2650. Wondering if anyone has done so and can post some photos. Also, am I right in that the rops can't be folded down while using the 3ph on this model?

Picked up my brand new B2650 this afternoon and drove it around the property for fun to try out all the levers and knobs. Fortunately the radio head set I use in my NH T4.75 plugs into the radio...

I'm looking for a tractor/FEL/BH and the B series should fit me well. I'll be digging for level off for a new semi above ground pull, putting an edition on my house so I need to dig into the hill...

Hi Everyone, First real post, first real tractor. :) I just received my shiny new B2650 Kubota with 60" MMM, backhoe, forks and quick attach bucket. I love the tractor so far, the only annoying...

Hi all, bought a new B2650 and was wondering if it was normal for the MMM to be hard to pin up out of the way. I have to jack it up into place to install pins. Is this normal??

Hi Everyone, I've been researching and lurking on here for a while and I'm going to pull the trigger on a tractor sometime this summer. It will be the first tractor I've personally owned but I...

Is there any cheap place that sells the B2650 air filter that is kubota and not a knock off? It's part 6C060-99410. By the time you add shipping cost it's around $46 bucks.

Im new to the whole forum world and just realized i posted this question under the wrong topic so here it goes. Im picking up my new B2650 with the following : FEL, 60in quick attach bucket...

so I'm picking up my first tractor next week and want to make sure I'm getting a good price. Its a brand new B2650 with the following: FEL with quick attach 60in bucket, third action valve...

Looking at purchasing a Kubota B2650. Is the 2650 a "large frame" B Series tractor like the B7800? Also, what Kubota models does the 2650's MMM fit, other than the B2650? And, what other Kubota...

I'm having a few problems installing my new mmm. I'm having trouble figuring out Kubotas instructions on this one. Got the front bracket on no problem. Trying to work out were the rear brackets...

Just getting familiar with my new B2650 HSD. I noticed that the entire left side body work flexes when stepping on the entry step and up onto the seat. Is this normal? It seems excessive and not...

Just brought home a new B2650 HSD w/ 534 loader, QA 60" bucket, 5ft brush hog and grading scraper. Time to put it to work on the "farmette". Thanks to all the posts on TBN in helping me decide...

Hi I have a B2650 and just picked up a PTO generator to power the house during power outages. Are there any quick tricks to disarming the kill switch in the seat so I can run the PTO while off...

Looking for rear blade, rake, grader box, and a quick attach 3 point hitch for B2650 for trail work, drive grading, general property work. I do tend to be somewhat rough on equipment...

Just looked at a used B2650 and noticed that it was difficult to operate the loader smoothly. The tractor would jump around during the operation. Wonder if this is normal for this model?

While after an exhaustive search and considering buying new I bought a 2013 with 1100 hrs Fel, 60" rear blower, mmm and quick attach forks. After thinking about a BX I am glad I went with the...

I've narrowed it down to a B2650 with turf tires, 72" mmm, FEL with QA 60" bucket. It will be used for mowing (a lot more than I do presently), driveway maintenance, moving of brush, trees, and...

My old man snagged a barely used B2650 with 34hrs on it today..! He was looking to buy a new B2601 setup the same but this one showed up at the local Kubota dealer 5 mins from his house. It came...

hello does anyone no what the insize diameter of the lower radiator hose is. i want to put a inline heater but mot sure if its a 1 1/4 or 1 1/5 hose size thanks

I finally found what mounts on the front of the frame, lol. I also noticed the 8 lug front axle. Can you get Bi-Speed in the US on a 2650? Here is a link to the...

Our village is looking to purchase a new "side-walk" tractor and must be less than 60" and front snow-blower capable. Also will see mower duty in the summer.Just checking if any-one has this...

I just got to use my B2650 Cab tractor for the first time.The whine from the transmission is almost unbearable.I did try it out before I bought it and debated over buying it because of the...

Got tired of mowing around it so i drcided to take it out I used BXpanded's ripper attachment to cut through the roots.I had to have a little help from the F250 to get it out of the hole.

Can anyone tell me if that little flat bar that i have circled should be bloted to the frame if so which hole because it aligns up with a few? As the dealer has it installed now it will just spin...

Bought a used Kubota 2650 with 60 hours on it a month ago. It has loader and backhoe. Looking to add a new front mounted snowblower and Landpride rototiller. Price quotes I have gotten look...

I loosend the top of the the injector line.Do i need to take the line completetly off the injector or loosen the injector itself to bleed it.I've never done this before.Any help would be appreciated.

I was planning to purchase a B2650 with the factory cab option. I prefer a cab version as we have extreme weather conditions. My garage has a 7 foot door and the Kubota's overall height is listed...

Boot was tore off by bent guard around shaft on left side. I priced a new end because the boot was not sold separately. $115 so i said i will wait till i have to replace it.I made my own boot out...

Looking at a 2014 Kubota B2650 model. Hoping someone has some feedback on this model? Is this a tier 4?

Hi everyone. I have a build sheet and I am curious about your opinions on the prices. This is my first tractor and I'm excited but nervous and want to try to get the best deal I can. I know the...

I installed some LED bulbs in the headlights of my new B2650 and that seemed to help the putrid lighting that comes from the factory...being on a roll, I decided to put some LED bulbs in the tail...

I am a relatively new owner of a B2650. My first post on this site. I frequent orange tractor talks, so I'm kinda cheating by asking advice here, so don't rat me out. :laughing: I'm looking for...

Does anyone have a 2650 with the 72" deck that can comment on how easy or difficult it is to put on and off? If it is a drive over that would at least save having to push the thing under from the...

Anyone replaced the speakers in their B2650/3350? I'm wanting to replace my speakers and maybe add 1-2 more, I was think about adding 1 in between the radio and a/c controls on that flat spot...

Looking at a used 2650 with a loader and backhoe. It has 60 hours. It's on a non kubota lot and the dealer is asking 24,000. I asked him and he said he would add the kubota 3rd function valve for...

My tractor requirements will likely be changing to include a lot more mowing, brush hogging a couple small fields once a year along with mowing trails through the woods, and moving snow and brush...

New to the forums and just purchased a Kubota B2650HSDC. Any must have mods or accessories I need? I'm thinking I'm going to do a backup and Fel camera. Also going to do front and rear led cab...

Is the HST filter located on the left side of the tractor by the rear tire? I just wanted to be sure that is where. I'm confused about the HST filter and the Hydraulic Filter locations.

Hello all! Happend upon this site while researching the Kubota b50 series, I have found a like new 2014 B2650HSDC only 80 hours. Tractor comes with Kubota 60" MMM and Fel, and radio installed...

Hello, Strongly considering buying a L2501 or B2650 with backhoe and front loader. I'm curious what people's opinions are for these two tractors. The L2501 seems very comfortable for me...

I bought a B2650 in November with the loader and backhoe, thumb, ssqa, 3rd function valve, 60" bucket, rear remotes, alternator upgrade, industrial tires loaded, stabilizer pads, and wheel...

While using the tractor today, cleaning up after taking down some trees, the hydraulics stopped working. Symptoms: The only circuit that works is the bucket curl. The 3 point, bucket lift, and...

Not exactly a pro videographer, but thought I'd make a video of the Kubota B2650 in action for anybody that's wondering if a tractor this size will work for you. Probably could have made the PIP...

I have started to look at both these tractors as a possible upgrade/ replacement for my B2920 and ZD mower. My main reason is twofold, the heat in South Texas and the dust (its dry here send...

I searched but couldn't find to much information. I did find a couple of prices but not to meany so anyway I am starting the search to buy a b2650. I'm still a bit torn between the b2650 and the...

Have had my tractor for 1 1/2 years, works well and gets the job done. Been using the backhoe all this time. Purchased a few implements to help with a clearing project, so finally removed the...

Second Kubota...no problems except for headlights which only seem to work when they want to. Not surprised the way they sit in the hood and are subjected to such high force when you drop the heavy...

I knew when the welded on cutting edge wore that I was going to replace it with a much better and stronger bolt on type due to the fact that I am in the business and knew it was the way to go. I...

Good morning everyone, I've been asked by a few users here to describe our situation, so I'll tell a few stories and get some photos up. I'll see how this goes, we'll see how often we might have...

Wondering if any recent buyers could give me an idea of what they paid for a 60" mmm on a B2601 OR a B2650? Short version, I think my dealer is leaving out a $500 rebate I was promised and...

I'm about to purchase a b2650 from the local dealer. He quoted me $2500 for a 72" Landpride rear finish mower, $2000 for the 60". I have zero experience with RFM, any advice would be great. I have...

I am trading up to a B series from a bx, and was on the fence between a 2601 and a 2650. I was leaning towards the 2601 until my old neighbor went down to the dealer with me and talked me into the...

Is a 5 foot bush hog to much for a B2650?

I decided to install a bigger tool box on my B2650. I found on at Napa for $12.00. Took the crossbar off that holds the tool box and removed the lights. I then cut off the bracket for the slow...

Just wondering what speed you are supposed to use when mowing with a 60" mmm? I use M on the rough areas and H on the smoother places. I just don't want to push the tractor to much in H, i guess...

I made the deal today on a new B2650, loader, backhoe with mech thumb and canopy. I hope to take delivery before sunday, but I told the salesman not to hurry as I know he is busy and I want my...

I know it is just a tractor but i garage my B2650 and the sun shines through a window all day on to it. I assume it's the suns UV that fades paint just like a cars paint? I plan on getting a...

I just installed my 60" MMM does anyone have any tips to install it with ease? My trouble is the deck is so heavy it's hard to get it into position by yourself to mount since the rear wheels of...

Hello all, my Wife says go ahead and upgrade!:drool: (She's a good wife, to be sure.) But is it worth it to upgrade? I have a 2009 Kubota BX25 which has served me well, doing everything from...

I went back to the Kubota dealer this morning to inquire about a larger frame than the BX25D. I ran the B2601 they had on the lot and really like the gear drive. But looking at the Kubota website...

Hello Orange enthusiasts! Ive been researching to buy a new Kubota so naturally that means i've also been scouring the interwebs devouring as much info as possible. After all, research is fun...

This will be my first tractor. I own 23 acres, about 7 will be mowed (somewhat hilly terrain), and a 1500 ft driveway (uphill) to maintain. I will also be doing common homeowner things like tree...

Haven't been here for a few years. Sold my B3300SU when I relocated from Colorado to the East coast. Lived in Massachusetts for two years until I finally decided to move to Rhode Island and buy...

Recently took delivery on the B2650. I bought it a month ago but had the dealer hold it until I could park it inside at the new house. We had about 6 inches of snow, so the initial test was to...

Hello all, I have a question that I wanted to get some input from anyone more knowledgeable than I am. I have a new B2650 ROPS that I installed a pair of led light bars on (1 front, and 1...

Okay so tried asking on Kubota forum, have the factory 3rd function kit, trying to figure out where the electrical harness ties into the tractor? I can't seem to find the plug(s). I appreciate any...

first post here and love all the tips and info. Got a B2650 w/cab this summer and looking to add a grapple, so I ordered the third function valve kit from Messicks and the hydraulics seem pretty...

Hi, Just purchased a Kubota B2650 with the BH77 and decided to order some rear remotes for it, after talking to the dealer they called me back and said the factory kit (B5340) has a note that...

Will a Woods RB 600 or 6 Ft. Rear Blade work ok to remove snow on my B2650 Kubota tractor ?

Hello, I've had my new tractor for a coupe of weeks now and have come across an annoyance that maybe some one has a solution to. I have found (twice now) that when I turn myself a bit to the...

I have a b2650 rops and have found the need for a bigger alternator. Does anyone know of a kit, or if the cabbed one has a bigger one? I'm pretty sure I could make something work but hesitant to...

Does anyone know why the optional 25x8.50-14 front / 15-19.5 rear R4 tires are recommended only for the B3350 and not for the B2650? Standard R4 tires on both are 23x8.50-14 front / 12.4-16 rear.

Hello all, I'm trying to decide between these two tractors. I've searched for quite a while on this site and have finally decided that one of these two tractors will fit my needs the best. I have...

Went to a Kubota dealer yesterday and looked at these two models. I will plow snow and do light maintenance on the property. The brochures for both models talk about "newly introduced" and "newly...

I plan on buying a new B2650 before years end, i was going to buy a front mounted snow blower but have been thinking about the quick attach 60" bucket and 60" quick attach snow blade option. I see...

I now own a B2650 tractor with backhoe and front end loader. When you hook up the backhoe to the B2650 tractor at what position should the hydraulic 3 point lift lever be in when you use it ...

Going to the Kubota dealer this weekend my first pick is the 3350, i will ask about the DPF and see how much they know about it if they say to avoid it or don't know anything about it my second...

When I ordered my 2650, I didn't think about blowing snow at oh-dark-thirty so didn't have them add the rear worklights. Based on how bright the front incandescents are (or rather, aren't...)...

Picked up a set of light duty (2200lb) 42inch pallet forks from Everything Attachments. Here's the link to the pallet forks: Small Compact Tractor and Mini Skid Steer Pallet ForksTheir facility is...

Out mowing a meadow and the cab started getting a lot warmer. Come to find out that even though I'd been cleaning the radiators with compressed air and water hose, the AC radiator was mostly...

Hope they pics came through. Delivered sat morning and added 13 hours over the weekend. My first real tractor and been very impressed with what she can do. Mostly old landscaping removal so...

I'm a big guy that is looking for a tractor to handle mowing (3 acres with hills and slopes and plenty of obstacles), FEL w/quick attach bucket for moving mulch, topsoil, and relocating snow...

I will be taking delivery of my B2650 on Mon, and will immediately need to tow stuff with a clevis hitch on the drawbar. What size pin does it take? 3/4"? I assume the tractor will have a drawbar...

It is by no means a commercial unit. It's a large glorified homeowner's tractor. It doesn't have the weight or the build of it's bigger brother - the L series. I used dad's BX23 for nearly a...

Hello all, New to posting on the site, became a member from reading alot of great post. But now have question of my own. Just got a new Kubota B2650 with Kubota FEL and Backhoe. Alike the old...

Friend of mine has a B2650 with the cab. It's been sort of hot around here, up in the low 90's recently with high humidity. He had been cutting the lawn during the day - and parked the tractor...

Added a couple TS LED work lights Navigator 4 in. Round Heavy-Duty LED Utility Light | TractorSupply to the ROPS on my B2650. I fabricated a steel bracket / clamp for the lights so no drilling...

Just started looking at the Kubota B2650 and have a couple of questions. They are offering a clutch-less HST on this model. Wondering what the pros and cons are by going clutch-less? Also, the...

A few months back I had a third function remote value and switch installed on my B2650 tractor and loader. I have yet to use it. A couple weeks back the switch fell apart. It's located ont he...

Hello, I have a Kutoba B2650 and using a Powerhorse 3-Pt log splitter. I have purchased the auxiliary hydraulic kit which does a great job running the log splitter. The instructions indicated...

Aside from going with the better dealer, which brand is the better buy? I want to put my money into a solidly constructed machine that will last 20+ years with just normal maintenance. While I...

I am looking at getting a 2650 with 60" mmm. Machine will be used to mow about 2 acres mostly open ground other uses will be using 3. Aerator, stone rake, scraper blade etc. I have not seen much...

A great unit BUT the reversible seat sits 3 inches higher than the stock seat when in the forward driving position. This creats an awkward and unsafe operating position. My dealer is looking into...

Well, I called my dealer Monday to get an updated status on my B2650 with loader, QC 54" bucket, QC 72" manual blade, 60" MMM, ballast box, RTR 1258 land pride tiller. All is in, but they sent...

After several rounds of negotiations with the my Kubota dealer, I am getting a difference in quotes of $4300 between the models. Would you bite for the higher HP of the B3350 over the B2650...

I'n in the process of buying a B2650 with the front mount 63" snowblower, backhoe and loader attachments. Since I cannot find any manuals to verify, I have a few questions re: installation of...

Looking at buying a box blade for a B2650. Looks like a 60" box blade will barely cover the tire footprint (I bought the 1.5" spacers in case I needed to use/buy chains). Although the box blade...

So I picked up a used Mackissic PTO chipper on CL from a local farmer and ran it last week a few times. The chipper knives were pretty dull and it was a struggle to chip anything larger than about...

I got an hydraulic leak when I curl the bucket. It happened after I was diggin up some soil. Here's a video of the leak. Take a look. Any suggestions? I have an email into the dealer. I'm...

The little tool tray behind the seat A) isn't big enough, and B) does not give me a warm fuzzy feeling storing tools and pins and such next to all that glass. So: I mounted a mini-ammo can to...

LA534: Very smooth response. Far better than the B3200 that I had. :thumbsup: Fuel consumption: With 10 hours on the tractor since new 05/15/15 it has used less than 5 gallons of fuel. About 4.5...

I was pleasantly surprised to find out the 2650 would pull the old disc harrow with ease . Thought I would post this so if anyone else had any doubts you can rest assured it can do the job just...

I had posted earlier that my B2650 hydro noise was excessive. To follow up I now have the tractor back from the dealer. They found that the cab was not mounted correctly and was rubbing on the...

Picked up a RTA1258 tiller earlier this week, and love it. Plenty rugged for what I do. Tilled up the 50x100 garden in no time, and did a great job breaking new ground. Time to give dad's 30 year...

Within the last month, I took delivery of my new tractor and since the grass is about to start growing, I decided to play around with the mower deck (install / removal) this past weekend. In...

Looking for real experience using this specific model (B2650) to mow their grass. Wondering how the size and weight effects the turf. Thanks.

Picked it up at the dealer yesterday after waiting nearly 4 weeks for them to get one in. They couldn't arrange delivery until mid-to-late next week, but I was all done waiting, thank you, so I...

How does the deck lock in up position when not in use? Are the front wheels of deck on a swivel and larger? Back ones large or the small plastic anti-scalp ones? My B2650 has a suspended deck and...

Got a dumb question about the above. After you drain out the old fluid, how do you make sure that the air is purged from the heater in the cab roof? Does that happen when the thermostat is closed...

I just received my new B2650HSTC (1.7 hours). The noise from the hydro system is unbelievably loud (low-mid-hi range), I mean you could hear this thing a mile away. I previously owned a L5030HSTC...

I've got an email in to the dealer so I'll find out eventually, but thought someone here might have one and could tell me: What does the Kubota B2650 have for a winter starting aid? Glow plugs...

Currently have a B2320 with a virtually new BH65 backhoe. Im interested in upgrading the tractor to a B2650 Cab model. Can anyone tell me if the BH65 would fit the BH 77 subframe recommended for...

As the title implies, I am wondering if anyone on here uses a B2650 (or B3350), that replaced the B3030 compact tractor, for snow removal on sidewalks. More specifically, how did you set it up...

Just took delivery of a new Kubota B2650. First tractor I have owned, my friends will be glad I am no longer pestering them to borrow theirs any more. Found lots of great info on this site while...

I had to go out in 0 degree weather this morning to take care of 6 inches of new snow . The tractor is in a heated area so starting was no problem . I noticed when I drove it outside the temp...

Took delivery a couple weeks ago on my new B2650. ( sorry, no pics, just been working). Got the 60 inch loader and the Bh77 backhoe. First job, was to dig up a drain tile from my garage, that had...

I am hoping to take delivery of my B2650 cab tractor in the next week or two. I ordered the tractor with loader, third function, loader mounted snowplow, quick hitch, front mount snow blower and 2...

This a picture of the hyd. fluid that came out of hst filter after the first 50 hours of service , and an open view of the filter element . I could see a very few very tiny specks of metal which...

In a few days, I will receive my new, and first tractor from the dealer. Pics will come when it shows up. Its the B2650 with loader and bh77 backhoe. The dealer was waiting for the 4 point mount...

I'm taking advantage of Kubota's 0% financing and buying a B series tractor with cab and backhoe, either the 2650 or the 3350. It's a bit of a budget stretch for me to do this and it would cause...

I notice I'm getting quite a bit of exhaust residue on the left side FEL hydraulic lines on my B 2650. I have about 50 hours on the tractor. The exhaust pipe is about 13 inches to the lines in a...

My dealer is 50 miles away so when I got the tractor I bought hyd. fluid , oil , and filters for the 50 hr. service . I only bought an oil filter ( HH160 ) and one hyd. filter ( HH660 ) as that is...

Does anyone have one of the new Kubota made loader mounted snow plows yet? I am wondering how well they are built and advantages and drawbacks of a quickhitch mounted plow.

I am thinking of trading my B2320 in for a B2650 cab tractor. My question is about front mount snow blowers. The Kubota website lists both a 51" and 63" front blower. I am wondering the pros and...

Trailering my B2650 Tractor and Reccomended Tie-Downs Just picked up a freshly built tandem 7000lb GVWR landscape trailer at the factory just south of us in Lexington, NC (Kaufman Trailers). I...

After having my new B2650 a little more than a week, I realized I should have ordered the 3rd function Aux Hydraulics kit for it when I bought it. Everything attachments sells a kit. 3rd function...

Curious on what the going cost for the 50hr service on my new Kubota will be at the Dealer here in Greensboro? I may have them do it this one time. They want $350 to just ballast the rear tires...

I see bucket hooks welded on many tractors. Why does Kubota say don't lift anything with your loader except aggregate et-al? It's explicit in the manual. ???

I promised I would share feedback after using my new tractor a few weeks. I took delivery of a B2650 with FEL, rear blade, and a Vrisimo flail mower earlier this month. Primary work for it will...

Got my first tractor.

When I say B2650 blower, I don't mean it is from a B2650, I mean that is the model of the blower. Supposedly it fits the older B series machines like the B7500.

B2650HDC Factory Cab Tractor A/C and Heater +Hydro drive B2782B 63 Snowblower B2714 Quick Hitch B2793 Mid PTO DriveLine B2726 Quick Hitch Frame Support B2756 Hydraulic Chute rotation...

I purchased a B2650 in May. Purchased with the LA534 loader with the SSQA 54 bucket, 3rd function valve kit for a future grapple and snow blade, R4 tires, telescopic lower links (installed in...

Looking at upgrading to a B2650 or B3350 from my current B2920 Cons with B2650 vs B2920 1.5hp less on PTO Pro's with B2640 vs B2920 A/C Factory cab Position control on 3pt hitch Telescoping...

I was at the kubota dealers a couple days back to pick up some hyd. fluid and filters . The person at the counter mentioned that kubota has sent them a couple of items to replace on B2650's , one...