quick hitch

Anyone looking for a budget friendly quick hitch, check out this one i just bought from Tractor Supply.

Tractor: Kubota M7040 Primary implement: woods brush bull 720x (1200 lbs) woods says it's QH compatible. Hi everyone. It's tough taking on and off the 6ft 1200 lb cutter. I don't have enough room in the barn to store both together inside, and I'm not gonna let my tractor sit out. I would...

Is it true that SpeeCo is the only Cat1 QH not requiring bushings? Can be had at Tractor Supply for $170.

I have an MX5400 which is a Cat1/2 system...I'm looking to get a set of Pat's quick hitch adapters and I'm thinking I should order Cat 1....does it make a difference and has anyone put Pats on their MX5400? Any feedback on experience with them. All my equipment is Land Pride but one TMG...

File this under the work smarter not harder category. Using a jack to position, raise/lower the quick hitch really saves the back and makes it a breeze to install, remove and move around. -Craig

Hello! I've had this quick hitch (attached pic) for many years but this weekend I lost the pin in the picture (arrow pointing to the pin). I have no idea where I got these hitch adaptors and I'm hoping either someone can lead me to the name of the hitch and / or where I can get a new pin...

Save trips on every project! Stop looking for your tools! Get organized! Grab the Bigtoolrack & go in a moments notice…Your tools stay on your Bigtoolrack, it’s a great tool organizer on and off your tractor, telescoping casters make it easy to roll away in your garage, an excellent source of...

Seeking advice on getting a quick hitch. A quick hitch would make many things faster and easier but what about connecting the PTO shaft with a Quick Hitch? It looks like a quick-hitch would seriously interfere with connecting the PTO . My Kioti DK45s has a PTO brake and the tractor shaft...

Hi Guys, I recently joined this forum, i have a sub compact on order. To me it looks like the well know "quick hitch" that we see on many youtube movies, is not "popular" in the EU. I guess it is due there are other systems availlable in the EU, which has some advantages and disadvantages I...

This is probably a dumb question.....but I don't know the answer so hopefully someone can help me out. I am seriously considering adding Top and Tilt to my Kubota L2501. I used to have a Quick Hitch (triangular frame), but I gave it away because it was so difficult to hook implements up (too...

I have a Woods Quick Hitch, and would like to purchase a suitcase weight attachment for it. I have come to realize after researching these forums in the past, that all quick hitches aren’t created equal in terms of specs, compatibility etc… That said, does anyone know of a compatible suitcase...

I have an L5740 Cab and have been deliberating between a quick hitch, Pats or swapping out my link ends for Euro hooks. I've read many threads discussing the pros and cons. Pats and the Euro hooks are certainly the most versatile in terms of fitting "anything". Pats are a non starter for me...

I've been looking at purchasing one of these Pat's Quick Hitch for my New Holland T1510. How many of you have experience with them? Is there anything I need to know prior to using it? Any advice would be much appreciated...

I just bought a new but preowned quick hitch for my 1986 38hp Ford tractor. Turns out Cat 1 is 29" wide, and while it will go on the lift bars, none of my attachments are wider than 22". Is there a company that makes a Cat 0 quick hitch? (google failure)

Thought I would post up some of the adapters I've made for attachments I have that are not quick hitch compatible out of the box just in case anyone is looking for ideas on how to build one. Lots of ways to do it and most people probably just modify the attachment, but I wanted to leave the...

As a new tractor owner, I bought a quick hitch. I just added the bushings to the box blade and can't get it to seat properly in the hitch. At all three points, I'm bout 1.5" out of the seat. As a result, I can't lock the bottom pins in. Problem is with the top hook not dropping past a spot...

Hi all. I have searched and can't find any info on this... Can you mount a 3 point backhoe to a quick hitch? I have a John Deere 4600 with a 3 point backhoe made for a much smaller tractor. I went smaller to increase the safety factor and reduce the chance of damaging the tractor. My concern...

so I am considering a quick hitch, looking through the comments it appears I need bushings per attachment? people are saying they are cheap, but quick hitch bushing can be upwards of 40 dollars, people in the threads are mentioning 1 dollar per bushing I am not seeing, that can someone shed some...

I want to use SSQA implements on my Speedco Quick Hitch. I found a unit that costs $1025 but looking for something more affordable. I found chinacrap that cost under $300 but is not QH compatible. There is a plate under the top pin that will not allow the J hook to engage. I found this...

I have a Kubota L3560 and a Land Pride RFC2072 rotary cutter. Last year I had it mounted directly to my three-point hitch but this year I'm attempting to use the quick hitch that came with my Big Tool Rack. The default pins on the cutter are (I believe) Category 1. I've added some shims /...

What size (how long) pin for the lift arm to attach a quick hitch on a Kiubota tractor?

Looking for anyone with experience using this quick hitch on a GC https://www.northerntool.com/products/pat-s-premium-3-point-quick-change-hitch-category-1-20-000-lb-lift-capacity-model-cm102-12610 How likely is it that I'm going to need a new top link? Will I need to get a new PTO shaft for...

For Sale: 01- JD Quick Hitch / LVB24898 / will fit 4100 4110 4010 4115 2320 2025R 2520 2720 2032R (1 Gen) / $1,200 02- JD Angle Kit / LVB 24901 / same as 01 / $325 03- JD Quick Hitch Adapter Kit / LVB 25302 / will fit 2520 2720 2032R (1 Gen) / $100 04- JD Front PTO Kit / LVB 24801 / will fit...

So I’ve been thinking about a quick hitch…. I’ve used a Pat’s easy hitch for nearly 20 years.. but lately I’ve changed tractors and got a few more attachments.. and my new tractor has a hydro top link… The top link complicates things a little when switching attachments.. I think my bushhog...

Anyone know of some type of alignment idea to connect implement to the front end when you can't see the quick hitch

Hey all! After a terrible experience with a "Quick Hitch" I returned it and got a Pats Quick Hitch. Installation on my BX2860 went smoothly, but I have a question. When lifting an implement the arms (and pat's hitch) angle inwards. I guess I never noticed if it did that with just the 3 point...

I made at first my UNIVERSAL QH It was suitable for standard cat1 and cat2 tools and for my not standard tractor tools It works very well and I love it. But it is complicated and heavy and most people do not like that. What to do next . I try now EURO HOOKS. I welded Euro Hooks to my Kubota...

Billy Goat push leaf blower converted to work on our Bigtoolrack quick Hitch https://bigtoolrack.com/.../bigtoolrack-quick-hitch... SAVE YOUR BACK! We are all about making your life easier and helping you get organized! Check us out today! https://bigtoolrack.com/.../bigtoolrack-quick-hitch...

THE ULTIMATE QUICK HITCH! Pin on Top Link no tools required to adjust! The BEST! High Quality Heavy Duty Construction! Make attaching any piece of 3 point equipment a breeze with this category 1 quick hitch from Bigtoolrack. This quick hitch comes complete with hardware and the tapered top...

I'm new to the world of quick hitches so I just want to confirm that I'm thinking about this the correct way. I bought a Nortrac QH1N from Northern Tool. The whole appeal of this hitch is that it's supposed to be set up for category 1 with no bushings required. I think when they redesigned it...

Went an picked up another quick hitch today. This time for my 67 Ford 3000 diesel. I lucked out. I got one back in 2014 for my Kubota B2620. Went with the B.E. (Braber Equipment) because it looked identical to the Land Pride (which all my implements are except for the chipper/shredder) but it...

New Deal Starts Now! LIMITED TIME OFFER... FREE QUICK HITCH with any Ultimate Rack Purchase! Add both items to your cart USE CODE FREEQH OR Get 20% off our Bigtoolrack Quick Hitch USE CODE QH20 https://bigtoolrack.com/collections/current-deals 810992,814098

Hello I recently purchased a mk martin meteor 68 pull behind snowblower. I received the blower and went to hook it up on the tractor and it wouldn’t fit on my quick hitch, I currently use a off brand and thought maybe it was that quick hitch, so I pulled another one off a little 1025r that I...

I just upgraded from a 35hp Hydro tractor and 40hp gear tractor to a New Kubota L6060. Something I didnt account for was my old tractors were had Cat 1 3pt hitches, and the L6060 is a Cat 2. I know everything can be "fixed" with bushings, but the Cat 1 quick hitch is narrower than the Cat 2...

I'm sure there are plenty of us who have a quick hitch on here. This weekend while bashing my thumb taking a landscape rake off I decided it's time to get one. I see lots of reviews where people are ripping the top hook bracket off. Anyone with a 40hp tractor that uses ground engaging...

I have partially retired my GC2300 (it still has work to do) and I just started looking for a quick attach setup. My 2300 has had Pat's system on it since not long after day 1. I have seen plenty of messages regarding quick attach systems over the years but I have just started searching so...

Anybody use a Land Pride FDR 1660 finish mower with quick hitch? Looking at the manual, apparently you can't float the front end if you use it with a quick hitch. Which pretty much negates the use of a finish mower. I might as well use my bush hog!

Get More Done with your Bigtoolrack Equipment! When you order any Ultimate Rack Combo we will take $300 off our Quick Hitch! Don't miss out on this, offer ends July 20th! Use Code: COMBO300 See it in action in this Video Shop HERE Learn More

Yes, Harbor-Freight had a 20% OFF coupon for the 4th sale. I waited a while for this. I got the Quick-Hitch for $111.00 I've watched 3 YT vid reviews on multiple quick hitches under various brands. The H-F holds up to the big name brands just the same. Why pay another $100 or $200 more...

From now until the end of Father's Day weekend we are offering a $100 coupon for our Quick Hitches! When you use the code QH100 that will take $100 off of your order. Remember the deal ends after the weekend so don't miss it! Look at our site and sign up for our email list so you don't miss out...

THE ULTIMATE QUICK HITCH! Pin on Top Link no tools required to adjust! Quality Heavy Duty Construction! USE CODE QH100 at check out. CLICK HERE TO ORDER YOURS! Make attaching any piece of 3 point equipment a breeze with this category 1 quick hitch from Bigtoolrack. This quick hitch comes...

I have a Pats quick hit setup on my 3PH. It works well and I have no complaints, But I also have a few implements that are not quick hitch comparable..In other words they are just basic #PH set ups with the pin and retaining pin to hold the 3PH arms on. I have a rake that i would like to use and...

Recently purchased a Betstco flail and am thinking hard about Pat’s Quick Hitch for my new tractor… The flail doesn’t appear to have room to “quick hitch” the traditional Pat’s way ( back up with the hooks under the pins and lift)… Will Pat’s work with this setup? Not necessarily the quick...

Of the many that are out there in the $200 to $300 dollar range, none seem to be stated to be QH compatible. Thus I was wondering if anyone has actual knowledge. Thank you!

https://bergmanmfg.com/hitch-information/ Anybody use these? Is there another recommended brand/model?

I have a BX2360 and the quick hitch lift cylinder is leaking. I have purchased the seal kit but was just wondering if anyone else has done this and if there are any tips or suggestions to make it go smoothly, at least smoother than I anticipate!

I have a TYM T474 with tar river tiller, and looking at an auger. I heard that a quick hitch doesn't work with ease with both. Anyone have a different optinon?

Hi all, Odd one I know but am looking for a cheap CAT1 quick hitch. It is not going to be used to actually run equipment behind a tractor but is for a project I am going to build. I am keeping an eye out for used ones and also searching for low cost new ones. Thanks for any thoughts on this.

i have a nib harbor freight quick hitch that i bought for my old L3010 and never put it on. Thinking about putting it on my L2501 .Other than the top hook problem, what do you guys think of them. Price was right and it would sure make hooking up mower easier. Any thing else i need to know about...

I have a new l2501 and also got a land pride 1260 mower at same time. Dealer brought it out with mower attached. I removed the mower and now thinking of using a quick hitch. I have a harbor freight quick hitch new in box that i never used on my other tractor. I know about replacing the top hook...

Titan Attachments Quick hitch- A Total Waste Of Money?

I want a quick hitch for my 5055. I'm told that the Pat's is the best way to go. Anyone have experience with them? TIA

Hey Folks. . . I’ve got an Orange MX 5400, and was looking for a Quick Hitch. I was looking at the SpeeCo Category 1 E-Hitch S14116000. This model has proprietary Cat-1 hook ups, so you don’t need bushings for every implement. The description reads that it is for a maximum 50hp tractor...

Have been looking for one of these. Any manufacturers to avoid? Supply issues abound, prices going through the roof, just saying. Edit, after trying to buy a Speeco, just purchased a Titan. Will have to buy adapters, makes it easier...

I have a complete snowblower assembly for my Kubota G1900 less the male G2549 quick hitch assembly. Looking to purchase this part. part 70060-03066 Thanks Peter W. Goshen, CT

Searching for a CAD file for something like these. Going to design a unit for the front loader (300E) and it would be nice to have the CAD file for these plates. If anyone has any ideas I'd appreciate it. So far no luck.

Hi guys. I just recently picked up a 2763a snowplow for my 2230. My question is how do hook it up? I’d didn’t come with a manual so I don’t know where the hydraulic lines all go.

I don't know if anyone else has had this problem but when I pull my finish mower the driveshaft will sometimes contact the cross member on my quick hitch. The arms on the mower float and if I try to set the 3 point to the center of the float with it level it will hit on a dip. If I set it to the...

Looking for a snowplow for my BX and found a used V5290 off of an RTV, does anyone know if that will fit the quick hitch on the BX or would it need to be heavily modified?

I need the quick hitch intermediate shaft For my bx2751 quick hitch for front snow blower I have bx 2370 so need the intermediate shaft that it is 14 7/8” long Kubota part number 70060-02728 Is you swapped out for the shorter on for bx 18 series used 11” shaft

I have a pretty new JD quick hitch I got in a deal with a tractor. I am going to sell it but am wondering if it is just Cat 1 or is it Cat 1&2? No label with a part number on it. I have the bushings needed for Cat 1 implement but will it also work with Cat 2? The pins to mount it to the...

Greetings all. I picked up a used Pats quick hitch for not much because the pervious owner sheared one the set screw/ adjuster bolts when he was trying to remove it. It was an easy fix for me to remove it, but I have found what I think might be a design issue, or at least poor planning. It...

I have had Pat’s Easy Hitch units for years – in a box in the barn. I never hooked them up after I figured out that I had to get a longer hydraulic top link, and would also have to lengthen the PTO shafts on a couple of implements. However, I have now decided that I want to try to install them...

I have been looking at quick hitch videos on YouTube and they look like a neat device that will help prevent back pain, at least in my case. But post hole diggers work a little differently since they don't use the top link. I have a YM2310 with a ROPS. There are 2 holes available for the top...

Anyone use a quick hitch or quick attach on their YT235? If so what kind and where did you buy it and how much? shipping? willy

So if I purchase a Imatch Quick Hitch for my JD2025r, will I have to replace all my PTO shafts? Can you purchase just one half of the shaft? While I would like the ease of the quick hitch, I not a huge fan of paying out for 2 complete PTO shafts.

Is there any reason I can’t or shouldn’t convert the 3pt mount on my woods RD6000 to look and function like the 3pt mount on my JD mx6 bush hog so it is easy to hook up the quick hitch? Or is there a better way to make it quick hitch compatible. I have enough steel laying around and have a...

Have a buddy looking for one. He called all of our area HF stores and they said they’re clearance items and will no longer be stocked. If anyone here works at HF, can they confirm?

There are unlimited internet posts about the cheap HF and RK quick hitches and YT videos out there showing reviews and modifications to make it usable. I found a deal on a Speeco E-Hitch at a Buchheits’ Farm store. They are only located in Missouri or Illinois. I found the hitch for $109 plus...

Noticed this on the inside & outside on both sides of my quick hitch today. Kind of curious how long it's been working up to this. 400 hours maybe of heavy use with a very heavy flail that was usually offset & often mowed some very heavy brush on a QH I probably paid $100 for. So I can't say I'm...

By popular demand ... :) An ancient 'Carrington Terracer' blade was included when I bought this Yanmar YM186D ten years ago. The previous owner used these together for snow. I didn't need the blade so I just parked it without cleaning it up. Recently the neighbor who maintained our shared...

I have been planning to get a Land Pride Quick Hitch, partly because most of my rear attachments for my B2601 are Land Pride so far. However, I am looking for a Woods Brush Bull cutter and the regional Woods salesman has a Woods Quick Hitch (TQH1) he's eager to sell. The price beats Land Pride...

I have a Frontier GM2060 attached to my 1996 JD 955. Due to having multiple implements I purchased a Titan Quick Hitch. I had to purchase the JD/Frontier Quick Hitch adaptor for the GM2060. On level ground I lower the mower so there is clearance between the mower driveshaft and the Quick Hitch...

I was looking at quick hitches, and rural king, tractor supply, and harbor freight all say "for tractors no more than 45 HP" fro the cat 1 hitches. Why? I have 2 tractors - New Holland TC33d (33hp), and a Kubota L5740 (57hp). All my attachments are cat1. - box scaper - 84" flail mower -...

I ordered a Pat's Quick hitch, Cat 1 when there were on sale here at TBN. It won't fit the tractor I bought it for without a lot of modifications to the lift arms. I have e-mailed Pat's about returning it but never got a reply. I'm not real happy with their customer service. Anyone need a...

I recently ordered a quick hitch from Agri supply online. When ordering, I had two options a Cat 1 that had a width of 301/4", vs a Cat2 With 37" width. All of my implements are Cat1 and the widths fall right around the 30" mark. So I ordered the Cat1. The hitch arrived today and...

I have a Lee Boss category 3N quick hitch. I believe Lee makes the best strongest quick hitches out there. They are over 1k new. I didn’t pay near that for mine I got it at an auction nearly ten years ago. Anyway I changed tractors and am going to all cat 2. Looking at the specs the lower hooks...

Has anyone changed the eMax factory 26L 'pin on bucket' to a Skid Steer Quick Hitch? What brand did you go with? Happy, sad, should have done different??

I have used Pat's Easy Change for years on my smaller Kubota L3010 and love it. I now have an M4 with extendable lower 3 pt arms. It is Cat 2 hitch. I also now have a cab which makes hook ups not so easy (I used to have access to the HST pedal from the ground before....I know...not safe). I use...

I may treat myself to a Harbor Freight quick hitch this afternoon. Locally only $110. One Woodland Mills video mentioned that it is compatible with the HF quick hitch. Got a guy coming to look at the old MacKissic shortly. Sent him my computer files already and found paper files and even a...

I bought a Pat's quick hitch during the black Friday sale here for my girlfriends tractor so we could leave the backhoe on mine most of the time. The hitches won't slide over the ends of the lift arms, there is a bell shaped end on them. I have sent an email to Pat's but have not received a...

Thinking of getting a Cat 1 Quick Hitch. Asked the sales guy when he delivered my tractor and he said they are more of a hassle than it's worth. States most attachments won't fit and it's easier to hook up without one. I don't have a clue since this is my first tractor. Won't have many...

Got a quick hitch for Christmas, but the triangle bracing on either side of my brush hog blocks my ability to hook up to it (they don't allow the hitch to get fully under the pins). You can see an area circled in blue in the photo where it's rubbing. I haven't found any products/solutions in...

It appears that Pat痴 quick hitch is the best choice for me. After looking at the Harbor Freight quick hitch I think it will take too much modification to work on my snowblower and carryall. Pat痴 will work for my snowblower right out of the box. I am concerned that there is not enough...

My apologies if this question has surfaced elsewhere - but I searched the John Deere website and could not find where I can buy this manual. I also searched this TBYnet website and could not find a link. I have the operators manual for the 47 inch quick hitch snowblower and the operators manual...

Installed a Red Rock Cat 1 quick hitch on my Kioti CK2610 last week, and it's riding really low. Is that normal? Is there any reason why I should not use the other holes on the 3 pt hitch arms and use the turn buckles to prevent it from going so low?

Where is circled in green it will not seat meaning the locking mechanism is hitting category three bushing but on the left it is seating and is working correctly I even took a level to it. It’s level meaning the lift arms perfectly level . I just cannot figure it out. The top hook is even...

I recently purchased a Kubota BX2380 and then purchased a quick hitch to use with it. When I went to hook up to my King Kutter tiller the quick hitch was too wide and too tall. It would work with my blade and some other implements but I needed it to work with my tiller also. My question is, has...

Hi guys, I have an early 80's John Deere 1050 with a model 75 loader on it. I would like to change my loader attachment from the 4 pin setup to a quick attach setup. Ideally I would like to make it compatible with the current JD attachment system so I can share attachments with my brother and...

Hello All, Longtime lurker, first time poster...Thanks to all for the information provided here...Lots of good stuff!...Anyway, I致e got another quick hitch question I hope someone can help with before I mess something up. I致e got a KIOTI NX 55 & a few attachments. I finally ordered a Titan...

Bought a quick hitch three years ago, haven’t taken it off , love it. The hitch offsets implement pins by 4”. As most of us know this creates pto shaft length problems. My problem is different. I move firewood pallets with my tractor and a three point fork set. After installing QH I notice a...

I just picked up a Bobcat ballast box for my CT2040. When I got it home and went to hook it up, the top hook barely made contact with the top bracket. I tried adjusting the top link some, and fiddled with it for a while, but it produced the same result time and time again. Anyone know what...

Last spring when I removed my Quick Hitch and Dozer Blade from the front of my tractor, I noticed a wear spot in the hydraulic hose (Blue connection) from the Quick Hitch. This wear concerns me and I'm going to have both hoses remade at a hydraulic supply shop. The wear area comes from the...

The tractor I am going to purchase soon is category 2. The flail mower I am planning to buy is category 2 NON QUICK HITCH COMPATIBLE. I will be using the mower most for the first year, but after that, will be changing attachments more frequently. My question is...should I even purchase a...

I just bought a brand new Kubota 3901 , new 5' Land Pride brush hog and a new Quick Hitch. The whole thing was set up at the dealer, driven onto a trailer, unloaded and I was brush hogging 30 min later. All was well until 1 hour into it, the brush hog completely detached from the hitch and was...

Is there a quick hitch that will fit cat 1 implements that will fit on a cat 2 tractor. My Imatch is only 1-3/8 wide where the lift arms fit and my new holland tractors have cat 2 lift arms that have 1-3/4 wide lift bushings. I don't want a cat 2 width quick hitch as the cat 1 quick hitch...

Anyone know if the L2180 quick hitch and subframe (from the L40 series) for front plows and snowblowers will fit the L60 series? I see them for sale and reasonably priced. I'm sure some extra parts would be needed but is it possible for it to bolt up or has too much changed- new L60 fuel tank...

If anyone has this Cat 1 QuickHitch Category 1 Quick Hitch 14116 #14116000 by Rural King Farm Store... I think it is what I need and think it will fit my attachments (scrapers, brush hog, finish mower, box blade, etc) But the nearest Rural King stores do not have it in stock and won't get...

Will removing the QH mess up the PTO shaft alignment?

Hello, Getting read to take delivery of a Woodland Mills chipper for my JD770. I've used my tractor for mowing, box blading, post hole digging, and always hated the process of mounting attachments on the cat 1 3 pt. Just tedious, and a lot of banging / skinning knuckles. Has anyone used a...

Can you please help me spec my new tractor and implements correctly? I am a noob and don稚 know much about hydraulics etc. Dealer salesperson is a good soul (and really my only option in the area), but I知 not 100% sure know how the various pieces will work together擁n any event, I would like to...

Someone posted a picture in the past of someone using a pair of clamp on titan pallet forks on a Harbor freight Quick hitch. The forks rotated up in the lower hooksfor storage. I've tryed to find that thread but can't. If anyone remembers where it was or a search filter that I can find it, I...

I was pretty much sold on the Pat's easy change quick hitch system, but never pulled the trigger, putting it off waiting for "one day." I know others have used the Harbor Freight Quick Hitch, but that has it's own set of problems. So, I was just browsing around and found a post where someone was...

Is there any particular reason why manufacturers put anti-rotation features on the lower pins on a quick hitch? I have a Harbor Freight and a Lee Agra Farm Hand quick hitch and both of them have a feature that holds the pin stationary. The hair pin clip hole is oriented vertically when the pin...

I really like my new EFG135 flail, but I was more than irritated with their just plain weird hitch geometry. Mostly because it isn't remotely quick hitch compatible. So, I did a thing. I had a steel rod cut to length and drilled so I could put clips on either end. It really easier to watch...

I did a search for parts not able to find what I need which is the spring that keep the latches down, this is one the early model but guess it does not make any difference guess they have going to mass merchants probably not able to do this small order anymore, might be wrong if someone know how...

Just used a quick hitch for the first time and it does seem to be a lot easier so I’m going to convert everything I can whether it was intended to work with that hitch or not. I got this from a family member who got it on a 2R Deere but went to a cab tractor and that NH tractor has telescoping...

something we did and have to share, we used some 1/8" x1" flat bar. We caught a piece in the vise between a socket that fit into the lugs with some slop and the jaws and bent the bar around and cut a half moon piece off, set it in the lug, and set a socket on it and tapped the flat bar into...

(Also posted in "Attachments Forum") I am looking for a 6 ft adj blade scraper (w/ tilt) that would be compatible with my Kubota L3100 with a QH15 quick hitch system. The obvious solution is a (new) Land Pride model RB1672 but I was wondering if there are other brands other than Land pride that...

I am looking for a 6 ft adj blade scraper (w/ tilt) that would be compatible with my Kubota L3100 with a QH15 quick hitch system. The obvious solution is a (new) Land Pride model RB1672 but I was wondering if there are other brands other than Land pride that will work with the quick hitch. The...

I recently purchased a 7' land plane and tractor for my driveway etc. and it is great. After not being on a tractor in 20 years and losing over a 100 lbs of weight/muscle in the last 6 months, I'm calling no joy on wrestling this attachment. I have a massey 231 with 1 rear remote and without a...

Just wanted to show off my new Kubota L6060. It was delivered Wednesday which was followed by 2 days of constant rain. While the rain prevented me from getting things done with the tractor, it didnt stop me from getting things done TO the tractor!! First and foremost, I want to thank Brian...

I decided to convert my ATV sprayer to work on my quick hitch. I welded up a simple rack system that when outfitted will not compromise the functionality of the quick hitch. I used it today and it was absolutely amazing setting the cruse control! I'm going to leave the rack on and put some...

I am looking at 3 tractors for some gravel driveway maintenance, light bush hogging, and loader work: CK2610 L2501 3025E I expect to switch between the box blade and bush hog frequently. Is the JD iMatch that much better than a standard quick hitch you could get on the Kubota or Kioti?

What are my options for a Cat 2 quick hitch? I have extendable lower arms to make hooking up easier and I don't change implements often but every time I do struggle with changing them...I question my decision not having one. Can you run Cat 1 implements with the Cat 2 QH if you use the...

Are the quick hitch from Harbor Freight and Rual king the same? I don't understand why when you buy a cat. 1 hitch you have to buy pins. Why don't they make them to accept cat 1 pins without adapters. I would say that most people who buy a cat 1 hitch have cat 1 impliments.

Hey guys- I have a ballast box that I'm modifying to fit on a quick hitch. I need to properly locate the top pin mount before welding.Should the top link pin just rest in the quick hitch hook? I would reason that the top link is not meant to carry any weight since it only provides support in...

I use a lot of different pieces of equipment connected to my Quick Hitch. I also need to remove it any time I mount the Backhoe. The holes for the 3pt. linkage pins have really worn bad and have gotten very sloppy. I purchased a pair of 3/4" and 2 pair of 7/8" steel shaft collars for the...

Hi everyone, Anyone have the front quick hitch snowblower for the 2080 series BX? How do you like it, and about how much did you pay? Thank Dave

Have a Kubota 4701 2019 purchased with a back hoe that痴 around 2100 lbs with 2ft tooth bucket well took back hoe off bought quick qh15 put 6ft box blade land pride works awesome love the quick hitch. Went to dealer to buy a land pride Ballast box and it痴 not Quick hitch compatible from Land...

I have benefited from many great posts and videos about different quick hitch options so I wanted to add my contribution as well. When I was thinking about outfitting one to my Kubota L3301 I decided to do something a little different and install the somewhat rare (in the US anyway) euro style...

Looking to get a 3-Point Quick Hitch for my b2650 where can you get a good one in Ontario Canada at a good price .That fit good and works good

I got a set of Pat's from the TractorBy Net black Friday sale to put on my new Kubota B2650. I have older model Pat's on my other tractors and between them and a hydraulic top link, hooking up an implement is not easy but the least difficult that I can make it. Imagine my surprise when I went...

Hi Everyone, I have a 2210 SCUT with a front 54" snow blade, quick hitch, and an adapter which fits onto the 2210. Will the quick hitch/blade be compatible with a 1023E just with a different adapter? JD says I cant use the existing quick connect or the adapter I have with the 2210. And I...

I would like to mount my post driver on my front end loader of my tractor with a skidsteer quick hitch but not sure how to make it adjustable to get it plum to drive a post straight any suggestions

Morning all! I tried posting in the snow forum, but haven稚 had much luck.. so here I am. I知 searching for a print of the blade bracket/support that is on the rear of the blade and attaches to the quick hitch. I can稚 seem to find a used one for sale, and I don稚 feel like shelling out nearly $300...

Hello, I have a question concerning the quick hitch sytem(s). I am currently ordering a mini loader with some attachments from a company in China (it was not my intention to start a discussion about the pros and cons to buy chinese equipment - I see it as an experiment...). I will also order...

WANT QUICK HITCH TO BE MORE FLEXIBLE A ) THE TOP HOOK SHOULD BE EASILY ADJUSTABLE MANUALLY OR HYDRAULICALLY B ) LOWER HOOK LATCHES SHOULD WORK AUTOMATICALLY C ) LOWER HOOKS SHOULD BE ADJUSTABLE MANUALLY OR HYDRAULICALLY FOR CAT 1 AND CAT 2 IF SUCH PROPERTY IS NEEDED D ) ALL...

Has anyone converted their Betstco flail so that it's quick hitch compatible? Looking to do it for my tractor and wanted to see what people have done. I have a top and tilt kit so adjusting to it is pretty easy once I figure out the adjustments I have to make.

Well, a couple questions... I bought my new Kubota B2650 with a QH10 quick hitch and grader scraper. I get the way it works. I really like the idea, but it’s a real pain in the you-know-what to unhook an implement! Question #1: Will this get better as things wear in a bit? I...

Hey everyone, I have a BX2660 tractor and a BX2750B frontmount snowblower. The BX2751 quick hitch that came with the blower has an 11" dual splined shaft that was designed for a smaller tractor. I need the 14.75" shaft that was designed for the BX2660. I was wondering if anyone had the...

Hi folks. It's your resident n00b again. I hate being the n00b asking all the new guy questions, but I am the new guy and I do have questions. Thanks for suffering/indulging my ignorance. On the recommendation of quite a few folks here I ordered Pats Quick Hitch. I later learned that...

Long shot, but does anyone know what size the spring/roll pins are for the quick hitch bushings? I bought a set of bushings and I lost the pins. I can order them online but I don't know what size they are. Help!

I am almost sure of what my next tractor will be. I will be getting new implements as well. Would it be wise to get extendable links and a quick hitch or save some money and get regular links? On my 3320 I used Pats because I had mix matched equipment. I really like Pats with a hydraulic top...

One of the most frustrating parts of getting this GC2410 is the almost total lack of info about the "connector" between the front mounted attachments (snowblower, rotary broom) from RAD Technologies. Officially called the "Quick Hitch/Sub-frame" assembly. The hitch part hooks into the...

I currently do not have a category 1 quick hitch put plan on buying one in the next few years. I was interested in making a few rear implements and would like to know what is the typical dimension between the center pin and the bottom of the frame member of a quick hitch to make sure I have...

I have a new M7060HDC12 and a few implements in the shed and more ordered from EA (thanks Travis!). I bought and installed the Speeco CAT 2 HD quick hitch, and have hooked up a Land Pride scarfing blade plus 72" back blade hookup - works great. Can't wait to get the top and tilt from Brian...

Greetings, TBN, There are a plethora of other threads discussion quick hitches, but I would appreciate some updated input that considers all the various fixes innovated by users and new products available. I've read up on multiple threads, but am yet uncertain enough that I have not made a...

I have Cat 1 implements and a Cat 2 tractor. I want to use a Cat 1 quick hitch. The problem I'm running into is that my lift arms are too large to fit into the opening provided on some quick hitches. The ball ends on my tractor are 1 3/4 wide and 3 inches high. If you have a SpeeCo hitch...

Just got my new L6060 with Landpride quick hitch. Worked great with landpride tiller but the 3pt top connection on flail sits too high. Any off the shelf remedies?

Just picked up a HF quick hitch... Is there a reason the stock lower pins are smaller diameter than the cat 1 pins? I have an older Massey and needed to connect sway bars to the pins (in addition to the lift arms) ...ended up hogging out the lower mounting holes on the new QH so I could put in...

I am digging and digging to find a quick hitch that will go between Cat 1 width to Cat 2 width. I read in an old post the Priefert made one but I am not finding it for sale anywhere. I do not want Pats, with my old cat 1 tractor and quick hitch I could switch all of my implements without getting...

Hi everyone, looking for quick turnaround advice on whether to get the LandPride QH10 or QH15 quitck hitch. I'm looking to get a quick hitch for my L2501, and in Canada, options are not as great as in the US and price difference between "economy brands" and big brands are not that big. Most of...

Looking into to purchasing a Quick Hitch for my Massey Ferguson 2706e the tractor has category 2 lift arms and top link. Mostly all my implements are newer & are category 2 or accepts cat1/2. Only thing I知 seeing is the height between the lower Lynch pins and top link pin. What痴 the best quick...

FREE QUICK-HITCH WITH YOUR BIGTOOLRACK ORDER! LIMITED OFFER FIRST 100 ORDERS ONLY! Order the ULTIMATE RACK. Dad can haul whatever tool he needs for any project he is working on. From raking grass, to fixing fence, dad will find a million ways to use the Bigtoolrack. Father's Day | BigToolRack

Does anybody know of a quick hitch, or telescoping hitch for the drawbar? Anything has to be better than having to get on and off the tractor to align the hitch pin when it's only one person.

Looking at adding a QH on my new LS 4140. Will also be adding Hydraulic Top Link. 3pt attachments will be a snow thrower, back blade, rake, and carry all. Use of use as well as access to PTO for blower are more important than cost. What are my best options?

What do you guys think of the Pat's Quick Hitch system? Did you find that your top link was too short with it? I have a Cat 2 hitch, but I just use the sleeves for my cat 1 blade. I know they make one that attaches cat 1, but I don't want to lose the cat 2 capability.

For all of those currently using a Pats Easy Change Quick Hitch I have a few questions... -How do they respond to tightening the stabilizer arms on the 3pt? I致e always snuggled up on my adjustable drag links to minimize any float on my scraper blade or finish mower. I知 slightly worried with...

I have an older 6 foot KK rotary cutter. I would like to make it quick hitch compatible. Anyone have any luck with that? The A frame is less than an inch too narrow. I was wondering if the new flex hitch they claim is QH compatible could be made to fit the older style deck?

Just got my Titan quick hitch last week & I want to be sure I'm doing this right: The PTO shaft to my rotary cutter interferes with the quick hitch when I have the 3 point lever all the way down. I need to lift the 3 point up to about 1-1.5 on the position control scale to keep it from hitting...

Hi all, A few weeks ago I installed Pat's Quick Hitch which makes hooking up my 3 point attachments much, much easier. However, with Pat's moving the lower linkages back a couple of inches, I found the top link had to be extended fully to connect to the attachment. And even then, it barely...

Is anyone aware of a quick hitch that also has an integrated receiver sleeve for a standard tow hitch ball? At one point a couple of years ago I read about such a model in these forums, but I can no longer seem to find it. Thanks for your help, Jamey

Hey everyone, Just wanted to get a "Heads Up" out there for anyone with a Titan branded quick hitch. I needed an extended hook to work with a couple of my own attachments, so I ordered the hook from Ken at Bolt On Hooks. It turns out, when the new hook arrived (very fast shipping), it was the...

Purchased a 3025e last week, it was delivered today, in the mean time I acquired a used after market Titan fork, that was designed for a skid steer hook up, got it for 75 bucks, Ordered the hooks and studs for the JD quick hitch from a company in Wooster Ohio. First thing I did today, was put...

Ideas welcomed. I've ended up with four extra OEM top hooks from Harbor Freight Cat 1 quick hitches. I swapped each out with an aftermarket top hook that protrudes a bit further for easier implement engagement. These are heavy, sturdy hooks. Hate to see them go to waste. I'm thinking some...

I am in the process of buying a used front snow blower for my BX2670. It is missing the mid-PTO shaft to the quick hitch. I can’t seem to locate the correct part number I need, to try and find a used shaft setup. Any part number information would be appreciated.

Hi, I have a Howse 60" bush hog, and I'm wondering if it's quick hitch compatible? How would I tell? I'm looking at Pat's Quick Hitch, and it looks like with my open pins I'd just use the bent washers and pins hook up directly to my current 3 PH pins. Any clues as to what I need to look at to...

I bought a quick hitch when I bought my RK24. I also bought (for now) a 4' tiller, 4' box blade, and a ballast box. While it's possible to me to very carefully back up to and manhandle these attachments into place to attach them, I don't want to. Hence the quick hitch. I knew when I bought it...

I have an opportunity to purchase a used set of Pat's quick hitch. However they are either of an older design if Pat's or not genuine. Can anyone identify these? Im not happy with my current quick hitch I bought from HF so I would like to give these an opportunity depending on what I find out...

I'm finding varying widths for trailer movers. I'm looking for one that has the receiver on the bottom and the goose neck on the top, and is the correct width to fit a class 1 quick hitch. It may not exist, and I can modify one if needed, but would rather just buy one and be done. Let me know...

I am one of the first customers to complain when a company's "customer service" fails me and I am pretty slow to praise companies and businesses that provide great customer service. For the record I have nothing but praise for the folks at Greenwell Mfg who make Pat's quick hitch. I am a fan...

Anyone use Pat’s Quick Hitch on an eMax 25? I ordered the Cat 1 but it looks like it too big. Just curious before I try to make it work if I got the wrong one?

I need to mount some quick hitch bushings but don't have the split pins needed. Anyone know the size pins they take? Thanks

JD 2210, Can I attach the loader with the quick hitch still installed? I think we are done with the snow for the most part. I would like to remove the snowblower and attach the loader now, but would like to keep the quick hitch installed just in case I need to attach the snowblower or plow...

Does anyone know what the part # is for the Quick Hitch subframe for the boomer 54d? It fits the 72CBH front blade, broom and snow blower. Thanks

Not earth-shattering news but it may help save time for other noobs out there. I wrestled with putting the quick hitch (2810) on my BX23S this week until I figured out the grill guard (held on w/4 bolts) needs to come off the tractor before you can attach it to the tractor. The hitch makes quick...

Just installed a set of RanchEx quick hitch adapter bushings on my 3 pt. rotary mower lift pins and what a difference! No more slop and won't have to worry about the mower lift pins jumping out of the Cat. 1 quick hitch arms. Highly recommend the adapter bushings for anyone using the HF or...

KBOGH/BoltOnHooks LLC is proud to introduce the Imported Quick Hitch Extended Hook for the Harbor Freight Quick Hitch and other similar systems with the adjustable top hook. This new hook extends out 5/8" over original hook making implement changes faster, easier, and in some cases even...

Looking for an owner's manual for the Kubota B2761 subframe quick hitch assembly. Anybody got a copy they can email me? Can't find one anywhere on the internet, only the parts lists.

I keep a Harbor Freight cat 1 quick hitch on each of my loader tractors. I wanted to use an old "3pt Drawbar" I've had in the barn for years to pull a manure spreader and a log splitter, and to move trailers around, without first removing the QH. A traditional "drawbar lock" (see, e.g...

Stopped by my not so local Kioti dealer to grab so filters today. As I was waiting for them, I noticed a quick hitch sitting on the floor. I have been considering getting one so I brought it home. I mounted it on my LK 2554 and it turns out they sold me the hitch but forgot to include the...

Hi there- I am considering modifying a bcs male quick hitch so that it could be mounted on a straight shaft generator head with a 7/8 inch shaft. Seems like this should be a very doable thing. Would be interested if anyone out there has some experience with this sort of thing specifically...

Someone had mentioned looking at getting a quick hitch for my new M7060. I've been researching them and am looking at a Land Pride QH20 as well as Pat's quick hitch system. I'll most likely be using a combination of Cat 1 and Cat II implements which confuses the decision. I'll also be buying...

I've had my HF quick hitch for about six years. For the first few years, I mostly used it for fast changes between a brush cutter and box blade. Every once in a while, I'd take the the quick hitch off when I needed my boom pole, which didn't fit the quick hitch. As I've added implements, I've...

I have the harbor freight quick hitch, i extended the hook out but i was curious do you guys use the quick hitch with every attachment that you can hook up to it, i was curious if any issues if i were to use it with my box blade, i dont see wjy their would be, i juat got new tractor with a hyd...

Good morning all. Question for everyone out there. When I went to install the quick hitch on the tractor it seems as though it's missing a bracket(BER666865). When I spoke to the former owner he assured me that he never had to install the said bracket in order to install the quick hitch and...

I currently purchased a Mahindra quick hitch and 6' box blade for my Mahindra 1533. I was wondering if it is sitting correctly because the bottom pins don't seem to rest on the quick hitch support. I have the top hook attached at the lowest point on the quick hitch, and not sure how to...

Just picked up a Harbor Freight quick hitch. I put it on my tractor (Kubota L3400) and I'm having an issue with the top connector. Either the hook on the QH needs to go up, or I need to rework the mower hitch. Am I missing something? Pic attached.

They seem to be universal across many lines. Frequently seen on snow blowers and push blades. Sweepers also I read. Has anyone MADE the male part? I have a custom need, and the price of these things on ebrat seems ridiculous. scroll down a few posts for images...

Found these cat 2 to 3 lift pins. Decided to try them after not being pleased with the bushings. Fit my hitch perfect and a lot stronger. I had no 1 1/8 bit so my son used a HF stepped bit to start hole a bit and finished it with a holesaw. Went quick I was surprised how good it worked.

I ordered a Quick Hitch with my new Kioti CK2610 - my first tractor. I have a small trailer that I will occasionally pull with the drawbar. I am curious, will I have to remove the Quick Hitch to attach the trailer tongue to the drawbar, or can I raise the empty QH up high enough to be out of...

Forgive the ignorance but I am a new tractor owner trying to make my experience less frustrating. The reading I have done on the site does not shed a lot of light on the impact of adding a quick hitch and its effect of the length of the PTO shaft. Both the Quick hitch and Pat's seem to add...

I bought the Harbor Freight quick hitch after doing some reading on here. I have an old Befco tiller that came with a tractor I bought. The issue is that the pins are too close together and it will not stay in the quick hitch. I see that one side is missing a bushing, but I still dont think...

Curious how many use the Kioti quick hitch on their CK models. I use one on my current JD (I-match) and really like it. Thanks.

Comes with a sticker that says 1000 lb limit but I'm sure it's over engineered to hold more. Just wondering if anyone on here has actually broken one. If so, where did it break and what were you doing when it happened?

I have the TS version of Pats Easy Change System. The adapter is designed for CAT 2 but my attachments are CAT1. I found these on Amazon. Amazon.com: RanchEx 1274 Quick Hitch Adapter Bushing Kit - Cat 1 For Quick Hitch (SKU 12851): Garden & Outdoor based on the description I figured they...

I picked up an Agri Ease quick hitch from a local farm supply store. I assume it's a chinese made unit. It is a catagory one but he quick hitch part is not. I assume from the measurements that its a catagory 3, bottom hooks can fit a 1.5" shaft and the top a 1.25". I thought it was a cat 2 so I...

I am looking at the HF Quick Hitch. (yes, I have searched the many threads) I have a 2538 with the Mahindra Box Blade and Mahindra Shredder I got in the package deal. What all do I need to adjust it to fit both of those implements? Do I need the top link adapter and do I need adapters for the...

Hi all, I am considering buying Pat's quick hitch for my 2610 and was wondering if anyone was using it and if I will need to get a longer top link. Thanks!

Hi all... Just picked up a quick hitch that was on sale at a dealership. However, I致e got a problem with my 55 gal ballast barrel. The barrel used to fit fine between the lift arms without the hitch...but now the curvature of the barrel is hitting the hitch before I can get it on the pins. So I...

Been looking at upgrading tractors for a while and looks like that isn’t in the budget for several years. Now looking to add a few implements to the collection. Will be looking at new box blade and a three point tiller. I plan to buy both as quick hitch compatible but I don’t have a quick...

What is best way to convert an older 4 pin bucket loader to a quick attach loader. Seen one made by WR Long. They are rather expensive. This is a Bushhog brand loader on 3930 NH.

I have been wanting a quick hitch for some time now, especially since I built my counter weight. It is not fun at all to hook up and because of that I don't use it as much as I should for loader work. My snow blower is a bit of a pain to hook up also. I have never used one before but I think I...

Anyone have first hand experience with both that can provide insight of one over the other? I'm looking to either add a front blade to my BX2670, or move up to a BX2680. Doubt I'll ever look at a snowblower, so the new front shaft coupling is of no real concern. Lots of talk here about using...

Bigtoolrack Limited Time Offer Free Quick Hitch with any Bigtoolrack Purchase! USE Coupon CODE BTR10 and get 10% off your order a Free Quick Hitch and Free Shipping our best deal of the year. Watch our Videos to see how easy it is to take the Bigtoolrack on and off with our Quick Hitch. Visit...

Was close to pulling the trigger on a B2601 this week then spent some time exploring the different options between a B2601 and a B2650. The B2601 as I optioned it had a quick hitch @<450. The B2650 comes with 3 point extendable arms. There is, according to the build it feature on Kubota痴 web...

Finally decided to get a QH based on watching a video on YT from Ask Tractor Mike. I bought the China-made (I'm sure) $99 QH from Agri-Supply. Didn't take long to get here and didn't take long to get it installed and set the upper link arm. I then backed my tractor and hitched up my 8' grader...

Installed my 3 point quick hitch today. It is the type that attaches to the lower lift arms and top link. Question is that the lower pins of the box blade are resting all the way down on the bottom of the lower hooks of the quick hitch. The upper pin of the box blade is well into the upper hook...

This looks like a great idea...I'm tired of wrestling with my 3-point attachments so I'm going to order a set today. My question is what does the $25 stabilizer bar do? Any comments on this system would be appreciated.