Search results

Have the 1971 International 3444 Industrial TLB which is an absolute beast of a machine for its age. The front loader cylinders are leaking. I have the kits to repack the seals. Was wondering if anyone has found replacement bolt on cylinders in case the seal kits don't work. I've searched...

Does anyone know who manufactures the JD OEM engine oil filter M806418? I have read that it is a Fram filter and others have stated it is a WIX filter. If so, what is the equivalent in those brands. I have found that the Fram 6607 filter has the closes dimensions to the JD OEM filter. I'm...

I've been looking at the sub compacts. It looks that the Masseys 1700 series have huge end knuckles at the outer hub for each front wheel. Does anyone know why? JD, Kubota, Kioti, TYM, etc. all look much smaller. I can't find any info so far to explain this.

I've run across a CS2510 low hour machine with a mid mower at a dealer with a very attractive price. Has anyone mower with a Kioti MM? How do the results look? Any problems with deck clogging up? Are there OEM Oregon blades available? Looks to be a good machine. I'd only use it for mowing, no...

Has anyone used and name brand pro press copper pipe crimping tools for 1/2" and 3/4" copper pipe? Pros, cons of specific brands.

Anyone know or have experience with this Stens synthetic oil? Manufacturer? https://www.walmart.com/ip/Hydraulic-Oil-Full-synthetic-5-gallon-pail/549582815

I'm in the market for a set of front R4 for my tractor. Any thoughts or experiences on Titan HD 2000 II SS or Carlisle Trac Chief R4 tires? I believe the Titians are made here in the United States, which I like. Don't know where the Carlisle are made.

I would like to get some input of owners of the lawn cutting tractors who have used aftermarket belts and pulleys. I have found that the PIC belts are not that great, as well as aftermarket pulleys found on ebay. The belts aren't always Kelvar, and the bearings and pulley seals are weak. I have...

I see that the hydraulic filter for the TC48 and TC55 has an anti-drain back valve. The TC35-45 doesn't. Is this because of the mounted position of the filter, or that the TC55 can have the ESSS system?

YouTube - State Budgets: Day of Reckoning

Hold my beer and watch this...... YouTube - Tratores agricolas em duas rodas-Tractor on two wheels

Has anyone bought an LS tractor with a front snowblower, or installed one onto an LS tractor. Looks to be an ideal tractor with the high hp mid PTO for a front snowblower. Has LS management reconized the market for an LS front snowblower, and done any development work with this issue. I really...

Overestimate fueled state's landmark diesel law

I'm looking for a gear speed chart for the 12/12, and 16/16 transmissions.

Is there a chart of the gear speeds for the 12/12, and 16/16 transmissions?

Cruiser cam catches 100 mph crash

Does anyone know, or have heard at a dealer meeting if John Deere is going to offer a tractor the size of the 455 again. I find that the X740 is a much larger machine that the 455 of yesteryears. Am I wrong, or have these most excellent tractors been growing in size a bit?

Does anyone know what is a good weed block product? I am going to use it under a gravel drive. I see commercial grade products with 30 year weed block advertisted. Is this so. Some are plastics, some claim to be fabric. Polysterene, or polypropolene. Is eithe better? 2.8oz up to 5 oz.? Some are...

FOXNews.com - Global Cooling Is Coming -- and Beware the Big Chill, Scientist Warns

Chainsaw Ale - Left Hand Brewing Company - BeerAdvocate

Military Videos: Videos, Army, Navy, Air Force, Marine, Marines - Military Times

Has anyone every retrofitted a loader control valve after taking deliver of a Cab L3030 model? Just wondering how tough it might be. Joystick, valve, all line plumbing. Cab installed.:confused:

Manufacturing.net ? Management News Now

Directorç—´ Blog

Washington Times - RFK Jr.: Hog farms bigger threat than *****

Has anyone else seen the medical picture of a fellow whom had urinated onto a 200 volt 3 phase electrical fence? It is making the rounds on the email circuit. I am wondering if it is real, or anyone else has been sent them. I can't find any verification info at sites such as snoops. It's hard to...

The Amazing Story Behind the Global Warming Scam | KUSI - News, Weather and Sports - San Diego, CA | Coleman's Corner

It's time to pray for global warming, says Flint Journal columnist John Tomlinson - Flint, Michigan Columns, Letters & Opinion - The Flint Journal MLive.com

Go East, young man? Californians look for the exit - Yahoo! News

YouTube - International Harvester

The Doghouse

Does anyone know why the TC35A, purchased 7/2004, and the TC48DA purchased 9/2005 have different temperature ratings? The TC35A is rated at opening at 82 degrees C, 180F, and the TC48DA is rated at opening at 71 degrees C, 160F. Is it due to one being a compact, and the other being called a...

DuraLast Products - Air Boosters - Natural Fiber Filters - Smart Boosters

As I have stated before, you must have done something pretty special to have earned the title, "Man's Best Friend!":D:D Dog calls 911 after owner has seizure - Wonderful World - MSNBC.com

Sun Goes Longer Than Normal Without Producing Sunspots A Russian Solar Scientist reported that we would enter this reduced sun spot phase back in 2005.

Does anyone know the loader specs for the Quicke Loader series of 700. I haven't been able to find any specs yet. Q 720, Q730??? Thanks!

"HONEYDIPPER DAN" classic MADTv | TV, Music & Movies | Funny Videos, Pictures and Jokes at JibJab

Ford New Holland Service Manual TN65 TN75 TN90 Tractors - (eBay item 170177161972 end time Dec-16-07 11:12:48 PST)

italiaspeed.com

2004 NEW HOLLAND TN60A 4WD TRACTOR w/ NH 32LC LOADER - (eBay item 230162652845 end time Aug-26-07 18:15:00 PDT)

FT.com / World - Learn from the fall of Rome, US warned

Hello, has anyone ever replaced the PTO shaft joint. I want to change mine out to one for a piece of equipent I want to run off the tractor PTO. I am having trouble getting the plastic guard removed. I see the lock/unlock latch on the guard, and have tried multiple times with a screw driver...

I was also reading the manual about lubing the 4wd assist driveshaft. It states in the manual this should be done every 50 hours. It doesn't go on the describe where to lube, what needs to be lubed.....Is it the drive splines?:confused:

I cut open my hydraulic filter by turning it on a lathe and parting it close to the base. Upon examining it I found out that it weren't all that dirty inside, and there were areas of the filter material which wasn't coated yet with the darkness. The darker part was only just a discoloration, and...

I was just reading the paper and it had an article about Wallonia region in Belgium that is going to start charging for outdoor grilling, or barbecuing. If you want to grill outdoors you must pay 20 euros, ($35) for that privilage, each afternoon/night. It is to help cut down on global warming...

MSN video

Dazzling new images reveal the 'impossible' on the Sun - space - 21 March 2007 - New Scientist Space

Watched this last night on the History Channel. Have seen the movie, 300. Also was given a book about it from a senior scientist over a month ago. Been reading it, off and on, but now am totally into it. Had no idea what a world changing battle this was, and the birth of democracy. Have read...

My Way News - 8 Feet of Snow in N.Y., and More Coming

Kirk Douglas Issues Editorial on His 90th Birthday, Saturday, December 9th: Financial News - Yahoo! Finance

Next from Calif. NBC11.com - News - Squirrels Go On Attack At South Bay Park

It just gets funnier, and funnier..........:p http://today.reuters.com/news/articlenews.aspx?type=businessNews&storyid=2006-09-20T175818Z_01_N20199499_RTRUKOC_0_US-ENVIRONMENT-AUTOS.xml&src=rss&rpc=23

Article in Design News. http://www.designnews.com/article/CA6344242.html

Hello, I was just over a friends who has this Jacobson G20 tractor, which he said was made by Massey. It is a 2 WD, with 6 foreward speeds, and 2 reverse, diesel engine. The 3PH doesn't work, it fact it feels like something is broke inside due to it being able to be lifted by hand. Any...

I went to the Antietam Open House, and had a wonderful time. Tractor movies playing, nice lunch with chocolate milk. I was climbing up into all the tractors on display, especially the very large Ag tractors with cabs. They had a TC55DA EHSS on display, and I was looking at the placement of the...

Hello, I'm here again to report on my "steering problem". I did some loader work this weekend with the TC48, and now with my reinforced ballast box loaded with a bit over 1000 pounds of lead bricks, and steel blocks. I'm very happy to report that the tractor steers fine, even with a heaped...

My neighbor and I are investigating backhoes for our New Hollands, and I remembered the posting by Rick Wallace for the Woods BH80-X unit. We have both down loaded the photos of the unit in Kioti orange, and am comparing it to the NH units. The dealer we bought our tractors from is having a...

Does anyone have any experienced advice on attaching the Mixer 80 to the 3PH. I will be putting it on the back of my NH TC48DA. I have read some instructions about possibly having to shorten the PTO shaft, and was wondering if anyone has had to do this. Also the lifting cylinder?, does it allow...

Hello, I've been looking at these 3 PH cement mixers, and have read the TBN forums on all of them. Has anyone bought the new Tractor Supply one, and used it? Or, the one offered by Sweet Farm Equipment? The TS unit is advertisted as an 8 cu. ft. unit, and the SFE is advertised on ebay as a 12...

Has anyone installed a block heater into the BD154 engine? Mine starts when cold, about 20 degrees F, but I would like to install a block heater. I have a lower radiator hose heater, and if I can't install a block heater, I will use the lower radiator hose heater. I have looked over the engine...

Well, I've gotten about 15 hours on the TC48 and absolutely love the tractor. It is very user friendly, and the only thing that would have made it better would have been the EHSS shifter. I have "found" the front wheel steering problem, and to be truthful, no I bought this machine and will say...

72\" Toothbar pic for TarHeelMan TarHeelMan, I payed $325 for my toothbar, after seeing it. It was very heavy duty, with the square ended 2 1/4" teeth. Heres a pic. IH3444

I was reading the concerns about the daily dust entering the front mounted air cleaner, and was thinking about installing an additional large K&N air cleaner with the over sock. The K&N is a very easy flow air cleaner. I was concerned about restricting the engine air consumption, and standard NH...

Does anyone know if this synthetic gear oil is is same as the newer Severe Gear oil??

Hello, I've recently purchased a TC48DA, and just this week ran across the forum string of the steering problems encountered with some of the TC48s, and especially the TC55. I was wondering if there was anything else anyone could add. I read where some people were having great difficulties...

Hello, I've recently purchased a TC48DA, and just this week ran across the forum string of the steering problems encountered with some of the TC48s, and especially the TC55. I was wondering if there was anything else anyone could add. I read where some people were having great difficulties...

After comparing the front axles of Kioti and Kubota, it looks to me to be the exact same front axle design arrangement. The housing that supports the bevel gear which transmits the power to the front wheels is massive. Do all theses 4WD, front wheel assist compact tractors use basicly the same...

Does anyone know what the alternator output is in amps for the DK45S??? Thanks, IH3444

My buddy is looking for a New Holland swivel seat for his 12/12 SS TC35A tractor. Seems that these seats are only available on hydro models, and the dealer want $400 just for the swivel plate, if you can believe it! We are both cruising ebay, and tried to find other sources for the Sears Mfg...

Hello all again, I've done a bit of searching, and examining loaders and found a site called www.Millerloaders.com. They are based in Iowa, and manufacture a premium loader, in fact they are the loader that are mostly used on New Holland TN60/70 tractors. Although they are not the very cool...

I couldn't help but see the similaries between the Kioti self leveling loaders, and the Quicke Loaders. Here's a brief history of Quicke Loaders, and I found that they had bought KMW in 1988, don't know if they still own them??? I also notice the Taesung Loaders are modeled after the Quicke...

Does anyone know if Kioti uses the same transmission, and 3 speed range rear axle in the DK series of 45, 45S, 50, 65, and 65S tractors. I do understand that the "S" series have an additional syncro on the mainshaft. What exactly does this additional syncro do, that the earlier transmissions...

I've read that Kioti is comming out with larger hydro tractors next year. The arugement I've heard against large hydros is that they product too much heat that must be dealt with, that at least the response I was told. Now with an adaquate cooler, and the use of a high quality synthetic fluid I...

Does anyone know if the DK45S can be equiped with a block heater to help with warm up in the winter. I'm sure that many will chime in with you don't need it, it will start, but I have had many diesel engine powered autos, and tractors and do notice a difference with a block heater. The engine...

It looks like the discussion about the Kioti 1590,and 1595 loaders has been deleted. The powers that operate this site have seen fit to kabash the freedom of speech that we all hold dear to us here in America. It is a shame. Don't know if they bowed to pressure from some dealers, or from Kioti...

Hello, I was wondering if anyone has bought a New Holland Tractor during the late winter (Feburary time frame?) and possibly how much you might have saved? I am specifically interested in the TC35A with SS. I have also been looking at the Kioti DK45S, but the loader is such a turn off for many...

Does anyone know where the electric silonoid for the 2wd to 4wd sits? Is it outside the transmission, or buried down in the transmission? And what is with the grease fitting being inside the boom? Is this feature patented by New Holland? Seeems so inconvenient to place them inside the boom for...

Hello, Does anyone know of a good transportation company for tractor shipping? The tractor is approximately a typical farm tractor with 55hp, and weighting in at 8000 pounds. The tractor is located in upper Michigan and will be hauled to upper central Maryland, above Frederick. Thanks for the...

I got a quote this pass weekend that is good for 30 days: 4310 4WD $13.3K, 12/12 shuttle trans $900, R-4 tires $150, 430 loader $3K. Less JD dealer discount $525. Grand total $16,825 before tax. Sound reasonable??? Do you think the dealer would discount more for a cash purchase?

There's a Branson 4520 on ebay with a FEL and tiller if anyone is interested. Has 7 hours on it.

There is a Mahindra 6000 4x4 in the classified section for sale due to divorce forced sale. It was bought last fall, FEL included. $18K. Found it this morning. IH3444

My Case 310F Dozer runs great. When backing up I can feel a very slight backlash takeup in the gear box/final drive. The dozer steers fine, and I rebuilt one loose final drive over 20 years ago. I removed the lower bearing cover, and felt a tiny amount of play, along the shaft's length by...