Search results

Thank you….!!!! That says fuel pump but I’ll give them a call tomorrow either way. Maybe they can steer me in the right direction if that’s not what I need.

Forgot to add pic of the part I removed.

I pulled the injector “the part I circled” when I was bleeding the fuel system after sitting for 3 years without running. There’s an “0” ring sealing the injector in the base. The motor runs like a champ once you get it going but it’s losing prime overnight. I haven’t been able to locate the...

So I should be good to go as long as they fit..?? I’m going to see if Bosch will help me tomorrow. They have a help line but I’ve got low expectations.

Here’s a pic of the injector but I can’t find anything online that references the numbers on the data plate. Haven’t tried to contact Bosch but that’s my next step assuming they have a consumer help line.

Is there anything special about diesel fuel injector “0” rings?. Can’t seem to locate replacements for Bosch injectors but I’ve got a large assortment of Viton “0” rings and I’m sure I can find one that’s very close. I assume the Viton rings should work if I can find a close enough replacement?????

Temp gauge died in M6800 cab tractor. Replaced the sending unit but still inoperable. Grounded wire to block and gauge doesn’t react. Possibly a brake between sending unit and gauge but I don’t care to chase it down if that’s the case. I’ve seen conflicting information regarding a fuse but I...

Your engine looks almost identical to mine other than the color. What’s your Deutz powering??

Thanks for all the info. For the record it took a little over 5 quarts.

Thanks, That's his machine. His also has a bucket and it's 4WD. Going to start with 4 quarts check the oil level and adjust accordingly. Im estimating it's going to take a little over 5 quarts to fill her up.

Apparently the engine or hood decals were replaced at sometime in the past becuase it's definitely a 3 cylinder engine.

YM2000D Motor oil Capacity This is a 4wd YM2000D not to be confused with the YM2000 2 cylinder. This is a 3 cylider engine and I'm trying to help an elderly friend do an oil change and can't find anything on the net.

Is this a free parts manual only or does it give specs aswell..???

I split my YM2000 a few years ago and replaced the clutch. It’s a straightforward job and pretty simple with basic mechanical skills. As far as getting all the parts to complete the job upfront all I can say is good luck. Out of 100’s of projects I’ve worked on over many years I think I’ve got...

I have included pictures of the fuel filter, fuel pump and unknown wire that’s not connected. I removed the output house from the fuel filter housing (pic 1) and turned over the engine about 60 seconds. Nothing is going to the injectors. Removed the rubber cover from what I assume is the the...

Air intake is clean and clear. I cracked open the injector furthest from the pump but I'll go back and crack the one that's closest. How do I check to see if the " fuel solenoid isn't stuck closed" Thanks for to EVERYONE for the advice and tips...!!!!!!!

Will see if I can find it and post pic tomorrow. It’s a 42 hp 3 cylinder duetz diesel.

My dad passed away a couple of years ago. He owned a stump grinder at the time. It’s been sitting in the barn since he passed and I haven’t had the will to touch it. I finally decided it was time to get it fired up again. It’s a Rayco 1642 with a 42 hp, air cooled 3 cylinder duetz diesel engine...

Temp sending unit was on the right rear of the block. I had to remove the hood, air intake and exhaust system to get access. Would have been nice had they put it near the front of the block where access would be much easier. Temp sending unit is circled to make it easier to ID in my pic.

Now I’m more confused than ever. I worked late so I only had a few minutes before dark but I thought I’d located the sending unit hidden behind the alternator just to the right of the ac compressor behind the thermostat housing. Was going to pull the alternator tomorrow to gain access to the...

So based on that pic is located on the right rear of the block near the firewall..???

Was mowing with my M6800 yesterday and the temp gauge died a few hours in. My Kubota has a bucket and that limits access under the hood. I removed the hood then the air intake but I still can’t find the sending unit. The next thing to remove is the exhaust system which I hope to avoid...

After a few youtube videos and internet research I've decided to give it a try. I'm going to do a complete inframe rebuild including sleeves. It's on it's last leg and anything will be an improvement at this point.

How difficult is an inframe rebuild for someone with average to above average mechanical skills?? It’s come to the point where I’m going to rebuild or have someone rebuild the engine in my trusty 2 cylinder YM2000. It still runs but it’s burning oil, had limited power and excessive crankcase...

Looks like you are starting to develop spider cracks around the lug nuts on your new wheels. Maybe that's a common issue and I should bite the bullet and buy new wheels.

That’s an awesome price. Willing to sell one..???

Please let me know if you have one for sale.

I see several vendors selling new front wheels but I would prefer a good used one if possible. Ive seen several on eBay but none are currently listed. The old one has been cracked for years and it recently started wobbling. I think it’s time for a replacement before it fails.

I知 missing a couple of sections on my well used chain drag. Is there a way to to make repairs.? I could probably find a shop to make the repairs but that would likely cost more than it逞ｴ worth.

This Montana belongs to a neighbor and he's thinking about selling it. He purchased it new. The hour meter is showing about 500 hours and it has been sitting in the elements for a several years. He said something was wrong with with the HST and a mobile mechanic bypassed the glow plugs. I know...

I have an old Deere 503 rotary cutter that could use a set of new blades but I want to save $$$ if possible and buy aftermarket. Can anyone point me in the right direction? I don't see why these wouldn't work?? CountyLine 5 ft. Rotary Cutter Blades, Pack of 2 at Tractor Supply Co.

The crankcase blow by on my trusty YM2000 has become quite excessive and it's not going to improve on it's on. I have never replaced rings on anything but I'm a fairly decent shade tree mechanic. I split the YM2000 last year and replaced the clutch with relative ease. I know the block is...

Tomorrow I'm pulling and sharpening the blades on my old Deere 503 rotary mower. Not sure how old it is since I purchased it used years ago but I'd say it 30ish years old and I'm going to assume the blade bolts are original. I searched the net and couldn't find any recommendations on how often...

Purchased this old disc several years ago along with a Yanmar YM2000. It's served me well working on small food plots but it's starting to have issues. I doubt parts are available but at least I could look around if I knew who made it. Unfortunately the neighbor I purchased it from passed a...

Local Tractor Dealer Recently Dropped Yanmar. Is anyone else seeing this where they live? I own an old Yanmar which I love but always thought the brand to be a rather small niche market. I had a feeling this was going to happen after I stopped by my local dealer and looked at new Yanmar...

I have a YM2000 that will pull my old 5' Deere rotary mower all day w/o any problems. I recently purchased a used Deere 261 finish mower that appeared to be in very good shape. I removed the drive belt and hand spun every blade to check the spindles and replaced all the blades at the same time...

I've owned Deere, Kubota and Yanamr over the years but I'm clueless regarding Mahindra. I located a great looking 2012 Mahindra 3616 4WD Cab Tractor with cold AC and FEL for sale locally with 450 hours. Does not have hydrostat transmission and the AM/FM radio does not work. ] I know Mahindra...

I know nothing about TYM but the prices almost seem too good to be true. td New 39 HP 4x4 Cabin Tractor & Loader - farm & garden - by dealer - sale

I know y'all must be getting tired of my questions. I swear I'm getting close to debugging this tractor so please bear with me... When I lift the 3 pt hitch to maximum height it drags down the engine. It does just fine as long as I stop the lift an inch before it reaches maximum height. Am...

My YM2000 does a decent job pulling a JD 503 5' rotary mower. Today I hooked up a JD 261 5' finishing mower I recently purchased. I greased it, replaced the blades ETC and the cut was amazing but it seemed to be putting a heck of a strain on my tractor although my grass is pretty splotchy and...

Thx, td

I have an old Yanmar YM2000 that I dearly love so I was happy when a local dealer recently started carrying the new models. This afternoon I checked out a YT235. I found the looks quite odd especially the headlights. The controls seemed awkward. I was also surprised to learn it was priced...

I recently replaced the damaged/missing dummy lights on my YM2000. I also replaced all of the sending units at the same time. Everything has been going OAK for the last 4 weeks while planting a garden. This evening I started it up and the oil light stayed on. I checked the oil level and it was...

I need 14 24" x 1 1/8" square hole discs. Any good online sources that won't kill me on shipping..?? td

The website is mostly useless and it won't allow you to configure a tractor. How in the **** does Yanmar hope to make inroads in the US market if their website doesn't even work..?? td

Just finished replacing dummy lights, old style fuse block, ignition switch and some jacked up wiring on my YM2000. Had the alternator tested several months ago and it was OK but that doesn't mean something hasn't changed since then?? Everything seems to be working surprisingly well but the...

Purchased the fuse box conversion kit from Hoye. FUSE BOX CONVERSION - CONVERT TO NORMAL BLADE FUSES!: Yanmar Tractor Parts I was torn between it and the generic replacement for about 1/4 the cost from Amazon or Ebay. I'm glad I purchased the kit from Hoye. It was direct fit and was shipped...

I'm having a hard time removing the headlight swith. I know there must be a trick but I can't seem to figure it out. td

I'm taking about the accessories like headlights, sending units ETC not the starter.... td

Google let me down this time. td

Pretty simple to split... Had her apart in about an hour. I have a few questions for those who have been there...done that.. I assume I need to remove the large nut in order to remove the flywheel so it can be turned. Is there a torque spec I need to be aware of when I replace the flywheel...

I'm getting ready to split my tractor in half and replace the clutch. I can save a few dollars buying a clutch off Ebay. Is there are difference in quality compared to Ebay or Hoye..?? I am a big believer that you get what you pay for but I suspect there's only one company manufacturing most of...

I've located a nice looking Yanmar 2500 for sale for $800.00. I haven't spoke with the seller but he says the crank bearing needs replacing. Is this a DIY type job for someone with basic mechanical skills..?? This would be a great parts tractor for some one with a 2500 but I'm not sure if...

My Yanmar has three dummy lights on the dash that have never worked. I found the bulbs and harness flopping around under the hood when I purchased the tractor and now I'm ready to repair them but I'm not sure where to start. Whats the best way to tackle this project?? td

Changed out the fuel filter on my Yanmar YM2000 and I can't get it to start. I refilled the plastic fuel bowl after I replaced the filter. When I fired it up it ran for several seconds died and would not restart. Per info I located online I then opened the pair of bleeder screws located above...

I found a seemingly good deal on a Eicher 364NC 35hp diesel tractor. Good looking tractor mfg'd in India sometime in the 2004. Try as I might I can't find a source for replacement parts. I even located a post where someone was searching for an oil filter. Is anybody familiar with this...

I'm trying to locate replacement wear parts for a 4 point AC bottom plow but I'm not sure which model I have. I know parts are difficult to find for AC implements but they are darn near impossible to find if w/o know the model number. Thx td

Been really difficult to operate the lever to lock in the front differential on my M6800 with cab. I briefly got under the tractor tonight and couldn't see anything bent or broken. I sprayed everything with a light lubricating spray while I was under there but didn't notice any improvement...

I'm the proud new owner of a 12 foot pull behind Poplarville harrow with 24" discs. I towed it almost 40 miles home on ancient dry rotted retreads and I was relieved when I made it. This thing is heavy duty but it needs a little attention after sitting up for many years. It needs new...

Are there any parts available for this harrow..?? Any opinions on average value in this condition..?? What's the consensus on this mfg's overall quality..?? It's been stored in a covered pole barn for at least 10 years. Thanks in advance...!!!!! td

This afternoon I looked at a 12' pull behind disc harrow. According to the seller it had been sitting under the shelter for 10-12 years. Other than that she couldn't tell me much. It was well used but it appeared to be a quality implement. I have searched the net but so far I have failed to...