Just a few days ago, my 600-hour B2620 started this odd stuttering behavior when the weather got slightly colder (just below freezing). It warms up and idles just fine, but under load, while...

Similar situation as others. Working fine then go to restart and no crank. Pto not engaged, hst pedal switch cleaned and jiggled until it clicks with key on, 10a fuse blown, no headlamps. Replaced...

I recently purchased a 51R battery as a replacement for OEM battery on a Kubota B2620 tractor. Turns out the 51R is 1/2 inch bigger in depth and will not fit without major mods. Has anyone...

I have a Kubota B2620 with LA364 Loader on it. Sometimes when I do to tip the bucket of the loader up/down the control lever seems to stick, if I move the lever a little left/right then it works...

have a b2620 and plan on putting a quick attach on the loader. Was wondering if the Kubota B2673 plow 72 in quick attach (pictured)would be OK to mount on the LA364 loader on a B2620 tractor??

I have had a B2620 for 12+ years. 800 hours and love it. I use it to move dirt, brush and snow mostly. Some grading and gravel road work. 7 acres mostly level with field/grass and about 3 acres...

Hello All; This YINTATECH Skid Steer Quick Tach Conversion Adapter Bobtach Latch Box Weld On QTK, I am thinking of adding a quick attach to my tractor but don't know if this one is any good or...

Worked on a friends B2620 that would not start. Turned out the rod that pushes the HST treadle safety switch had popped out of the hole in the metal cam plate behind the wall of the case. That...

Thinking of buying a finish mower for my B2620 for our 2 acre lawn. I really would want to go with a 6' cut, but with 19 PTO HP, I am just below the recommendations for a 6 mower. Is anyone...

I know it's outdated, but didn't want to get rid of my B2620. So now that I have the 3 point arms all off to get it set up for the new backhoe I just bought for it I was wondering......am I...

Only 370 hrs on a five yr old B2620 that has been maintained and babied and absolutely never overheated. I open the oil drain plug and get about a shot glass worth of coolant after a good sit...

The joysticks on the BH65 have a set of valves underneath them.... Could I take off the endcap, put another valve there, use longer bolts, bolt the endcap back on and use the new valve as a 3rd...

I had this posted on a Kubota forum, but now that we have a project thread here I'll post it up here too so people can see what can be done with a small tractor. I'll start with this......some of...

Hello TBN- Can anybody tell me what size dust plugs and caps I need to replace the broken ones on my B-series hydraulic hoses? More specifically the ones that connect to the front snowblower and...

When i pull back on the stick to raise the loader, it goes up real slow. Now when i pull back slightly on the stick it goes up normal. I've switched the quick disconnects and its still only the...

When i pull back on the stick to raise the loader, it goes up real slow. Now when i pull back slightly on the stick it goes up normal. I've switched the quick disconnects and its still only the...

I have a 2013 B2620 with 180 hours on it. Just recently I am noticing a feed back almost hesitation through the steering wheel. I turn the wheel and the steering wheel fights back and tries to...

I have narrowed down my search for a tractor to Kubota based on my needs and wants. I want a small B series and was considering a new B2601. I have come across a used 2008 B2620 with Loader...

On my B2620, you press down on the brake pedal and then push down on the orange handle by your right knee. Then you can lift your foot from the brake and it stays locked. My beautiful wife was...

I'm trying to disassemble the loader valve on my circa 2012 Kubota B2620 (see below for why). The attached picture shows my current state (I've also disconnected the top of the bucket control...

Yesterday I was using my tractor to knock down weeds in my back yard weed patch. After about 2 hours, I was headed back to it's parking spot in my garage. I had to dismount to open the gates, so I...

Good morning... Yesterday I received from my Kubota dealer a quote of $7300 for a brand new BH65 backhoe, 12" bucket, all inclusive and dealer installed. My counter to that was $7000 and they...

is this a quick/clean bolt up? anyone tried it? please with results? I sat on a 2601 recently...seat was impressive by comparison.

Any comments/experience with this Tractor 3 Point #3F Bale Spear, Hay Spear, Hay Mover on a Kubota B2620 series. I use round bales, approximately 800 pounds. This could make my life a LOT...

My primary dislike of my B2620 is the fact that it's impossible to get truly smooth loader control due to the linkage that connects the joystick to the actual loader valves. I've lubricated the...

The cutting height knob id very difficult to turn. How do I fix. Thanks

From doing my searching here and on the internet at large it appears that the only two ways of getting quick attach pallet forks and I broke them out into pro's/con's below. Can you all confirm if...

So my loader valve on my 2012 B2620 had a failure. The little check valve broke off & fell down into the curl spool & it's pretty messed up. So I took the valve to dealer to see if they can do...

Greetings folks... So I found these suitcase weights on Craigslist for $350...Kubota front suitcase weights and would like to ask a couple questions: 1. Is the asking price reasonable? (I have...

I need to move the BH65. I know the "correct way" is to remove the 3pt hitch and install the Backhoe on the B2620. However, it is cold and I will need the hitch again before I need to use the...

2014 B2620 with extras, FOR SALE Looking To sell my 14' Kubota B2620 tractor loader74 hrs looks like new, box blade, quick hitch, filled tires, 3rd function kit, (mytractortools)quick attach...

The B2620 pretending to be a Cat again.

Yup, another one. I would like to build my own Top and Tilt setup plus one extra rear remote (3 total) for my Kubota B2620. I know Brian at Fit-Rite is the go to guy and I'm not knocking him but...

2014 B2620 stalls out when warm; needs about 15 minutes to cool off before restarting. Dealer thinks it is a vapor lock, but has not been able to correct the issue. This is very frustrating -...

2014 Kubota B2620 w/only 200 hours, stalls out when hot. Dealer thinks it is a vapor lock, but can't seem to fix it. Very frustrating to out working and have to let it cool down after only an...

Hello everyone; I am following a suggestion for this post, I have a B2620 (2008) 4x4 HST and the other day after some light work I shut it down later came back would not start. I already changed...

May have been asked before but I was wondering if anyone has put a suspension seat on their B2620? If so what brand/model. When I mow the grass the OEM Kubota seat with springs under it beats the...

Talked to my dealer the other day, replacing my b2620 with fel,bh, & mmm with a BX2670-1. Sold the property I used the B on, so going back to a lower profile BX. Added the quick connect...

I see a RC54-24B for sale locally and noticed it fits the older style B7500, etc. anyone know if it is possible to put this on my B2620

All I can say is this stuff is awesome, i abused it today and it never missed a beat! Fit and finish is top notch. I love the Precison of this smaller grapple, it handles brush piles and logs very...

Anyone changed the HST oil on a Kubota B2620 lately? Coming up on 400 hours and the manual is not that clear. How many drain bolts and is there a screen to clean in there somewhere? Any info from...

Good Day! I have just about had it with my Cub Cadet LTX1146 and bercomac snowblower and have decided to get a real tractor. After considering New Holland, LS, Kioti and Kubota i have finally...

I'm a frequent viewer and very occasional poster, but I always value the collective wisdom available here. I've been pondering a step up from my current BX25 for some time, and now have my eye on...

Hello does any one have the same problem when backing up a long way the pedal is so hard to push Ive gave may self a hernia I have to keep a bush road clear to get out every day except...

I have a LA364 loader. The loader works like it should for up and down of the arms. But it won't dump. But it does curl up. The problem started after hitting something on the left side with the...

Finally got a decent little 4wd tractor. 2008 B2620 with BH65 hoe, thumb and canopy. Here she is as she arrived with 196 hours: Already put to work making moving wood to the deck for the...

I think this is common knowledge but I thought I would publish my experience anyway. I purchased a B2620 a couple years ago and I mow a lot. We now have 700 hours on the tractor. I am on my third...

When I say B2650 blower, I don't mean it is from a B2650, I mean that is the model of the blower. Supposedly it fits the older B series machines like the B7500.

Before I take the plunge on a B2620 that has tickled my fancy, was hoping for a little more input from the collective knowledge base here before I dig myself into a hole. That's the final pun of...

I have sold my B2620 and still have the Work Shop Manual that I purchased from my Kubota dealer new for $80+. Seeing I no longer need this I figured I would offer it here for sale for $50 plus...

I thought I would share some info on my recent grapple upgrade. First off, I have a Kubota B2620 w/ LA364 loader, BH65 backhoe and 54" mid mount that was bought new in April 2013. During the 50...

Any time I move PTO lever from 540 to neutral I get horrible grinding. Happens occasionally moving from 960 to neutral as well when mowing. Is there an adjustment somewhere? ANd yes clutch is...

B2620 owners, I'm looking for the total length from the bucket to the 3 pt hitch. Thanks in advanced.

I I have a 2620 - seem to me like the lift arm for the underbelly mower deck is bent. In the manual it looks almost 90 degrees, and bent upward by a few degrees...so when the lower link lifts...

So wanted to give my 2 cents on the ever popular bx vs. b debate on here and give you my personal experiences. I started with a BX 2230 loader/mower and loved it. Sold it because I got a great...

Might sell some property that I used the b2620 on (fel, bh, mmm), looking at going back to a BX model. Has anyone used the BX2670? I have a ZD326 to mow grass with, but it is nice to have...

Couple pics of the first phase of repairing my bushroad washouts. Very impressed with the little B. Tires aren't loaded and it pulls a loaded 60" box blade full of loamy sand up the hill no...

I'm sure JOHNTHOMAS will chime in here... Sold the BX the other day, so I'm going for the B. My last concern is the tires. My last B's sliced the sod on turns, albeit sharper turns. I test...

I just sold my relatively new BX25...which was great. But I have always had my heart set on a B2920. However, it is my understanding Kubota isn't going to make them anymore??? Why? Anyway, now...

Didn't make the trade. Keeping B2620 FEL BH with 39 hours till someone gives me $19,250 for it. Reason for the $750 discount is because of the Kubota discount coupon I rec'd which I can use so...

Would anyone know the MFD axle capacity for a B2620?

Don't design a house with two intersecting metal roofs on the north side of a house in snow country. Heavy stuff too.

I am building a cab for my B2620. (See thread here). http://www.tractorbynet.com/forums/build-yourself/300825-diy-cab-kubota-b2620-3.html I want to put a heater in it and need help / info...

Learned an expensive lesson this week. Pushing snow last weekend and all of a sudden I see a wave of Rimguard swosshing down the driveway and a frightening lurch feeling like the tractor will lay...

Looking in the engine compartment today of my B2620, I noticed a place on the cylinder head where a bolt is missing. I'm pretty sure there used to be a bolt there, because the area that the bolt...

I've been looking at swapping from R4 industrial tires to turf tires on my B2620 (TLB) this year when mowing season starts up. The R4s are loaded and have worked really well for all the projects...

Thanks for all the posts about home made cabs. A lot of good builders out there. I've started my build but will have questions along the way. My first dilemma is interference on the right side...

I have found a Kubota B2620 used with FEL LA364, and 60" mid mount mower, and it has 363 hours (witch is nothing if well maintained) on it and they are asking $11,900 for it. Another $2,000 for...

Tractor started up this morning with lights, moved it outside to warm up and after 5-10 minutes the lights had gone off and noticed fuel gauge read empty even though it is full. Then, foolishly...

I am trying to get a set of armrests for my B2620.The dealer can't find a part number and says Kubota doesn't offer them.He did say the same seat is used on numerous Kubotas but no armrests are...

B2620 owners that have serviced their own transmission - In addition to the spin on HST filter have you found a suction debris screen or magnetic plug that needs to be cleaned? Also how many...

Dealer never said anything about it, but I just read the B2620's have a 14.5A dynamo. Is it necessary to upgrade to the alternator to run two extra front work lights and one rear work light. Not...

Before I go and buy a new one does anybody have a front quick hitch for a kubota b2620. I think the model number is B2733A. I'm in southern NY. Thanks!

I am looking at purchasing a Compact tractor for our 4 acres for general utility work. This will be my first tractor so any guidance would be appreciated. I am considering a Kubota B-2620, B2920...

Will a Kubota 60" Front Snow Plow Model B2765 fit a B2620? Which quick hitch sub frame is needed? Thanks.

Do you guys think there be a noticeable difference in the mowing ability of a b2320 and a b2620 both using the 60" mmm on a long gradual slope. I mow about 4.5 acres. Would the three hp come into...

Hi, I want to replace mu engine coolant and I am not sure what to use. I just buy this engine coolant (Zerex Pre-Charged Antifreeze/Coolant) and I want to know If it is what I need. I have a...

Just sprung for the mower yesterday and am hoping the installation is not too much trouble as I have a back hoe subframe installed and also need to be able to install the subframe for the...

Hey guys i'm at work did a search came up blank. Does anyone know the rops tubing dimensions for a b2620. Making a clamp on radio mount need to mill out some slots just need the W x D. Thank you all.

Guys just got me new B2620 several weeks ago and so far only put 4 hrs on it. Anyway, I mowed the yard twice with it and then took the deck off due to some loader work in very unlevel ground. For...

What should I run the rpm's at on my B2620 while running a 60inch Mid mower? The dealer said 2500 rpm, slightly lower then what the rear Pto calls for.

After letting my wife use my B2620 (I know 1st mistake) Ijumped on it to mow the lawn. The first think I find is the 3pt will not raise the arms so the deck won't come up! I have never had an...

I really hope someone can help me with this. I have a Kubota B2620, 2 years old, bought new, (68) hours on meter. Never had any problems until two days ago. I was using the box blade to get up top...

Started accumulating some parts for my SSQA project and since all the factory backing plates and attachments seem to have the narrow "case" holes @21"OC I'm thinking of using this spacing for...

Heres the setup I added to my Kubota B2620 for rear hydros. Used a loader valve with power beyond fitting plumbed inline between power beyond of factory loader valve and 3ph.

For years I have had a 1991 Kubota B20TLB and a 2000 Great Dane zero turn mower. My zero turn needs an engine rebuild, so I have decided to sell both the mower and B-20 and buy a machine that can...

Just for the heck of it would like comments on the pluses and minus of upgrading from a BX 25 (pre D) to a B2620. Yes, I know I would lose the back hoe which in reality I rarely use. My rational...

I recently bought a B2620 with a 54 inch deck.I read reviews on this setup and a lot of people mentioned that the clippings from the mower were quite long which is what I found.I figured mulching...

Hello, What is fair market price for 2013 B2620 with industrial tires, front loader, backhoe with thumb and 60" mower? Thanks y'all!

I have been waiting 3 weeks but finally received a call this morning that my new B2620 with FEL, backhoe with thump, and 54" MMM will be delivered tomorrow. I paid $22,640 for the package with 2...

I received my new B2620 last Thursday.Bought it to do maintenance on my property.About three years ago I bought a new L3240 with FEL and BH to do work on my property.I put about 830 hours on it...

I am considering buying a Land Pride rotary cutter for my B2620 that I bought last October. When I asked about one last year the dealer said a 48" is the size I need, will the tractor handle a...

I am picking up a "new to me" Kubota B2320 tomorrow morning. It only has 30 hours. It does not have a mid mount mower and I was wondering if anyone has an idea of what it should cost to have one...

I was just mowing and my 2620 died. Threw the PTO into neutral, turned the key to restart and zero...not even dash lights. Checked the seat/kill switch and wires...looked fine. Cycle the key...

I was thinking I wanted a hydraulic top link, don't think I need a side link but will probably add one later, and I wanted a grapple for the loader bucket so I thought I could do both with one...

I've looked all over and can't find details on how the mower deck is mounted. I'd like to know in detail so I can tell what work it may potentially interfere with. Anyone have one that can give...

Hello all! First of all, I would like to send a shout out to everyone for such a great forum that is full of information and is way beyond my expectations. I am new to the tractor world, so I...

This is a question for the diesel mechanics on the forum. The b2320 is rated at 23 hp/17hp pto while the b2620 has 26hp/19hp pto. Both tractors use the same engine. What differences would produce...

There is 3hp differance motor and PTO on these two tractors, is it a noticable differance when finish mowing and snow blowing? I know everyone says go bigger but its around 2500-3000 differance at...

I asked this question awhile back and didn't get an answer so I will try again. Has anyone installed the optional Hyd. Rear Remotes on the B2620 or similar tractor? If so can I see pictures of...

Here she is. Just got it last week.

Hi, I understand from some previous forum posts that the B3200 QA from the LA504 loader can be used on the B2620/B2920. I am wondering if the QA can be bolted directly to the LA364 loade from the...

Paid off my 2008 B2620 today. I got a QA, larger bucket and forks for the loader and it's been a hard working little tractor and I've been able to do a lot around here in the past 4 years...

I put a post up a few weeks ago, regarding the price of the tractor. I thought it was about time I put some pictures up of my new toy. Due to the onset of fall / winter I haven't used it very much...

I have a Kubota B2620 with 250 hours. It will not crank. Removed startersolonoid and had it tested by Pasco . Said starter and solonoid work fine. Reinstalled. Checked safety swithes by...

I have this B2620 that has a BH. Wondering how difficult it is to remove and re attach. You owners of B2320/2620/2920 that have a BH that you have taken off and re installed, what do you say? I...

Does anyone know a trick for getting out of being stuck in low gear. I have a HST tranny and I can move the range leaver to High, Medium or low, but the tractor stays in low. The Range gear shift...

I have just bought my first real tractor a B2620, I have been looking at tractors for years. Mainly looked at the BX series but when it finally came down to it I went for the B series, I just...

I have started working on a custom snow blade for my tractor and figured I would share. I ended up buying two old Kubota blades back a couple of years ago for my bx2200 and used the best parts for...

I wanted to introduce myself because this is my first post. I currently have a 2012 B2620 tlb with around 50 hours. I upgraded this spring from a bx2200 that I had added a b601 to by building...

Here is my old thread where I was looking into a tractor for my 30 acres. http://www.tractorbynet.com/forums/kubota-owning-operating/232780-bx2660-small-farm-use.html So the Kubota guy just...

I like the basic size of the B series.... good for my pupose, I think, of crawling around in my woods and clearing things. The tire size looks right and the ground clearance, too. The B2620 look...

Have a new B2620HST which has 1.3 hours on it. Hit the key and instant start, let it warm up a bit, start increasing throttle and seat feels like a high powered vibrator has been turned on at...

I've checked my fluid level, it's fine. If I raise the deck within 30-60 minutes the deck will be on the ground/garage floor resting on it's wheels. Nothing in the manual about this, where...

I am close to getting a B2620. I am giving the Blue dealer one last chance to show me something but unless my socks get blown off it will be a 2620 and based on my experiences it will be orange...

I am looking at purchasing a used b2620 and wanted to get a price check. The tractor is a 2008 with 350hrs, it has the la364 loader and BH65 backhoe, Turf tires and a 16" bucket. The tractor looks...

We bought a new B2620 with a 60" mower a couple months ago to use primarily as a mower. About 3 weeks ago after my wife finished mowing I noticed the left front anti-scalp wheel bracket was broke...

Please help, I have read about checking the switches and jumping them, Fuses are good, moved the various control levers. What else possibly could I check for the reason of the starter not working...

Anyone have any idea on how or if its possible to use this B2620 to lift a pallet weighing 2000 pounds? I have seen somewhere a 3 point fork lift attachment that has its own base? Any thoughts...

I just bought a new B2620. Since we are going to use it for just mowing the first thing I wanted to do was take the 3 pt arms off so I didn't have to worry about backing into anything. The dealer...

I went to change the fuel filter element on my B 2620, and I can't figure out how to get the element out of the bowl. I did not any force, because I did not want to break the bowl-it seems like...

Hi Folks, I'm looking to buy a B2620 in Northern VA and received the following quote: B2620 HST Loaded R-4 tires LA 364 loader RCK60-29B 60" mid mower $18,400 (pre tax) Does this sound...

What would one expect to pay for a used B2620 with a 364 FEL, BH65 and a RCK 60 MMM? Used with only 50 hrs. on the machine.

Hello, has anyone had problems with their rear wheels not centering on the hub, and having no tapers on the rims, for the supplied taper nuts to sit on? Just curious, as mine was like that, and I...

I was out mowing for the first time this year. The tractor started up fine, and was running great. Then I cut it a little too close to an old satellite dish and smashed a rear turn signal ( the...

I've not seen a recent price on the forum and wanted to see if $17900(from the local dealer) was good for a B2620 with MMM and FEL. I have a quote from Barlow's which only saves me about $600...

Buying my first tractor - well, something to maintain just over 4 acres - 3 plus acres of pasture and two 1/2 acre paddocks. One acre is wooded area, sloped and one pretty sizeable slope in the...

I've used the search function to no avail.... What parts should I be ordering to get rid of these ridiculous turn buckles on my B2620's 3pt hitch? I'd like to get them ordered for when my...

I've been busy over the last few months getting my B2620 ready for snow blowing this winter including installing a Sims Indy Cab on my B2620 (that I bought at the beginning of this year) along...

My wife got me a B2620 with FEL and blast box for Christmas. This is my first tractor and what things should I have on hand for regular maintenance? The main objectives for the tractor is plowing...

I am looking at an 08 B2620 with fel,60mmm,and bh65 hoe with 87hrs. What is a good price. I post this before and used two different model of tractors. Which is confusing and probably why I didnt...

Proud new owner of a B2620. Decided to stick with the MMM because the tractor will spend most of it's life mowing grass. I traded in my JD X540 on it. I had a JD 3320 Cab tractor for years, and...

I'm currently in the market for a rear blade to use on my B2620 for snow removal during the winter. At the moment, I don't have any plans on using it for anything else except snow removal, so I'm...

I just bought this tractor and it only has 115 hours. Tires are like new. I would prefer turfs. Thanks.

I found a used 2008 B2620 with about 120 hours with LA364 loader and 60" mid mount mower. I haven't looked at it yet. What do you think is a fair price? He's asking $13500 or best offer. I have...

I have a 2620 that recently has been shutting off when i get off the tractor. This happens when the PTO is NOT running. In the past i just figured that i was bumping the PTO level and usually i...

Okay, there is this strange section in the service as required part of the manual called Draining Clutch Housing Water. It states that there is a drain plug in the bottom of the clutch housing...

Does anyone have pictures of the Rear Aux Hyd. kit you can get from Kubota for the B2620? I was looking into this kit but wanted to see pictures of the set up first. Also with the B series and...

I have a very small utility trailer but could use a larger one for general use. I've been eyeing the 5x10 trailer with a 3500lb axle at TSC. Question is would my Kubota B2620 be okay on it for...

for anyone that is interested I have a factory repair manual for a b2620 it is in pdf format 15.4 megs long It came with my new tractor . only problem is I am on dial up my tie up...

Just finished my B2620 first major maintenance...all in all, not bad....I was a bit disappointed when I called my dealer and asked them what they would charge me out-the-door, and they gave me the...

Got a chance to mow about 2 acres last evening. I was originally having the issue where the deck drops when lowering or when running over rough terrain. Dealer came out last week to repair...

I'm looking at both these tractors and gotten prices on both. Kubota B2620 w/FEL, Turf Tires and 60in mower = $17450 John Deere 2520 w/FEL, Turf Tires and 62in mower = $20487 Both have 0%...

Howdy ya'll. :laughing: I've been kicking around the idea of getting a small Kubota for yard detail and mowing. I already own a L3830 with LA723 loader. :licking: I mow (lawn) around 2 acres...

Ok folks. Two issues today first time mowing. Hopefully this is something I'm doing wrong and maybe you guys can give me a hint. Brand new B2620 with 60"MMM and FEL. Loader is off for mowing...

Ok folks. Two issues today first time mowing. Hopefully this is something I'm doing wrong and maybe you guys can give me a hint. Brand new B2620 with 60"MMM and FEL. Loader is off for mowing...

Can anyone tell me the length of a B2620 with a loader and three point? I am patiently waiting on my to arrive and I am looking at storage solutions for it. Thanks Bies

Purchased my B2620 last winter with FEL and MMM. When I picked it up I noticed it had the LA304 loader installed instead of the LA364. When I asked the dealer about it he said the capacity was...

1st post here guys, I've been reading your stuff for a while now, and enjoying it so I thought I might as well join in. I'm not implying I know much about welding just one of the names we call...

Is it just me or is the rubber step mat horrible quality? The nipples that keep it secured to the floor of the tractor have crumbled and now it just kind of lays on there poorly. 60 bucks for a...

Well, I have been hanging around here for a few months not saying much... but I finally broke down and purchased my first tractor Kubota B2620. I am looking forward to it and should have it in...

Whats the biggest Brush hog mower you could use with a 2620?

Those of you that have either what are you thoughts. I am looking at one of the two. I have 5 acres mainly mowing, some landscaping, moving snow, moving gravel around the driveway. What are you...

Hi folks, new to the forum, but read threads often... I'm looking for a small TLB for landscaping work I do for my customers, but it has to be light enough not to tear up the lawns. Settling on...

I have a new b2620 with the quick attach (FEL) from the b3200. It's amazing. There are supposed to be 6 grease points per side on the FEL, but there are only 4 zerks per side due to the QA. It's...

Today I started my B2620 and moved it to a work area. When I went to restart it I only got the click sound but no spinning starter motor. Checked the usual problems (battery, engaged pto lever)...

Anyone running this combination? I had the tiller for my BX2350 and kept it in hopes would work ok with my B2620. The tires are wider than the tiller, but tiller is offset so covers one wheel. The...

Thanks to the collective wisdom of the forum, I selected a b2620 for my first ever CUT. The quick attach suggestion (from the forum) of matching a b3200QA was amazing. The salesman looked at me...

I just bought a 2011 B2620 with R4 industrial tires. Dealer called and said they think they put wrong size tires and wheels on rear of my tractor at the dealer. Can anyone check their tractor that...

Bought the B2620 in March, and I love the tractor. It has been great. One time while I was checking the engine over I noticed that there was rubber "residue" on the bottom of the hood and on the...

Hello. This is my first time writing on TBN but certainly not the first time here. There is a lot of info you guys have helped me with and I am hoping you can help me out with a simple one. I have...

well its been a long while since i have posted here. had my bx24 for a few years. i finally traded her in and picked up my new 2620 today. really sweet machine. what a difference from a bx. in any...

I just had my new B2620 delivered on Monday and have been reading the manual. It is an HST model. Do you have to use the clutch to engage PTO and the 3 HST speeds every time? Or can you just put...

Gonna get one of these w. FEL + 4' RM (bush hog). Dealer thinks 16' will handle it, I don't think so. Here's my situation: I live in MI but will tow this rig 800 miles each way once/yearly to...

I just traded my BX2350 for a B2620. Hope they are a good tractor and no problems with this model. What do you all say? Will my 42 " tiller work ok with it? The PTO is about 3 " higher than the...

Hi i'm looking to buy a new b series tractor ,I tried a new demo unit b2920 last night and realy liked it ,I have a bx25 now and wanted something with more ground clearance then the bx 25,the...

The dealer quoted me 17,000 for T/L for the 2620 and $19k for the 3200, I need something with more breakout strength, and more GPM from the pump, the cub is a 26 HP unit but weighs round 1000...

I bought a brand new B2620 with fel and 54" mmm in November of 2010, and what a pleasure it is owning this tractor. I plowed my driveway all winter (and we get alot of snow where we are at) and...

I'm looking to build a hydraulic pressure tester for my B2620 tractor, and I was wondering if I might be able to get some advice on the correct components to use. I'm not sure exactly what the QD...

Finished stacking the wood for next winter today. The B2620 has been a great little tractor. That's the 5 foot "light" materials bucket on there. Four wheel drive backing up that steep little hill...

Hi everyone, I wasn't sure where to post this, so I started in the parts/repairs forum. At any rate, I have a cracked radiator tank and need some advice about possibly sourcing a new one. I...

Hi everyone, the radiator tank on my Kubota B2620 is cracked. The dealer is looking at the feasibility and cost of repairing it (i.e. replacing tank). If I end up needing to replace the whole...

Looking at upgrading to a B2620/2920 with the FEL, BH, and 60" MMM from my BX 2360 with FEL and 60"MMM. I'm patiently waiting on quotes from Barlow's and my local dealer. I already have a 48"...

What is a fair price for the new Kubota 2620 with 54" MMM, FEL, Grill Guard and Ballast Box ?? I am located in Rhode Island.

After changing my mind quite a few times while trying to decide which tractor to purchase (BX25->B2320->B2620) and after some not too difficult "up selling" on the part of my wife, I was finally...

Does anyone run chains on a B2620? Do you have clearance without wheel spacers? I am considering geting a set of chains for my tractor, probably 2 link v-bar chains for Tirechains.com. I used...

I'm looking at options to replace my BX24 with a machine next stage up. The backhoe is fine on the BX and given the option, could I use / transfer the BH on B2620 or even a B3200? I'd rather...

I am looking for someone that has made mount to attach an old truck snow plow to a kubota b series, looking for some different ideas and pictures to fabricate mine

Got a quote from the dealer of $22,300 for a b2620 w/ loader and backhoe. I went for it. Seemed to be in the ballpark for this area (NJ). Any comments are welcome. Thanks

I thought it might eb a good idea to keep you guys posted on me experiences with my new B2620. I have had it for three days and really put it through it's paces. No easy life for my little soldier...

I have turf tires on my B2620. Most of the time they are perfect for my uses. The only time I wish the tires were agriculture tires is when I'm using ground engagement equipment (eg plow etc.) I...

SO i have a 2620 with the factory LA364 loader and 50in bucket. I would love to have a 60 inch bucket for lighter crap and the 50 inch for heavy stuff. anyone know what options i have? Can i buy...

Subject says it all... Can it be done? I'm not at all familiar with the BX backhoe, but I'm wondering if I come up with the subframe for a BX and adapt / fabricate it to fit the B2620... Then...

I'm upgrading to either a BX2660 (probable) or a B2620(possible). Final pricing will carry some weight - utility/versatility will, however, guide my hand. Grass cutting around the house has...

Hi Well after having a second stroke I have decided I need to sell my tractor. My health gets worse not better and do not want wife to have to try to sell. I am going to price it right so I hope...

I have 10 acres, finish mow about 2 acres, "rough mow" about 3 acres, garden of 2 acres. I have a Case 530 ag tractor i use for fall plowing, discing, prepping garden. Had a JD317 lawnmower but...

What would be a good size landscape rake for a B2620? Will be removing branches and debris from a couple of areas where we have bulldozed. Thanks for the help in advance. Bill

I just got a new b2620 and have a few problems with less than 1 hour on it ! First is radiator leaks at top tank, Dealer came and looked at it and says yeap those radiators are junk ! Thanks alot...

I did my first paying tractor job today since I have owned my little B2620 tractor. I tore down a shed and am building a new one for a customer about 2 miles away. The ground was uneven and...

When I remove the FEL from my B2620 the colour coded plugs that are supposed to be inserted in the male and female hydraulic connectors to protect them (Caps and plugs) won't stay in place. They...

When I remove the FEL from my B2620 the colour coded plugs that are supposed to be inserted in the male and female hydraulic connectors to protect (Caps and plugs) them won't stay in place. They...

The new B2620 was delivered yesterday, FEL, MMM and box scraper. Mowing the lawn took less than 3 hours compared to 7 on the JD L120. Did the initial revamping of the 900ft driveway and moved a...

Dear Kubota: Why did you put the loader brace over my drain plug? I had to remove the MMM and the brace to do a simple job. :confused2:

Well, I just signed the paperwork this morning for a new B2620 with FEL and 60" MMM. Was going back and forth on a few models, but decided the B2620 was best suited for our applications (my wife...

Friday I ordered a B2620 with 60" mower deck and a LA364 loader. It is replacing a red Farmall Cub with belly mower that I have used for over 25years. I forgot to check to see if the B2620 has a...

:confused3:In looking over the literature on the B2620 tractor I could not find if the engine is a direct or indirect injection system. Just wondering? Not that it really matters but I have read...

My First Post! Shopping for my 1st Tractor. Considering Kubota B2620 or, at roughly the same price, the B3300SU. Need lots of advice! The B3300SU has no mid-PTO, but I'm not that familiar with...

Hello everyone and thanks in advance for your input. This will be my first tractor buying experience. Please excuse if some of my questions have been answered in other posts. I have decided to...

Ever since I was a kid plowing the 400' driveway with my dads B7100 hst I wanted one. He's had his for 28 years and since he's not giving it up, I had to buy my own.:D Yesterday I pulled the...

All of the sudden, I'm having great difficult installing the loader on my tractor. I have never had a problem before, and the loader has had very limited, and non-abusive use since I got it...

I am about to buy my first tractor. I am going to be mowing 4-5 acres with a 5' bush hog, and moving horse manure, sand etc. on a limited basis with a FEL. Do you think the Kubota B2620 can...

I need something to hold me over for a week until my mine shows up. Have any pics of your machine that you haven't posted? There aren't a whole lot of them on this site.

Here's an action shot of this morning's seat time. I cleared about 8" out last night and woke up to this. This snow is incredibly heavy and wet and I had to bring up the RPMs, engage the 4wd...

Hi guys...I've been looking at the B2620 and B2320 both with FEL and 60" MMM. I am wondering what prices you all have been quoted for similar packages...as I think my local dealer is part %#...

Anybody on here with a B2620 or similar size, use a 5ft rotary cutter? Is that too much weight for this tractor? Thanks for the input

Hello All, I have a fitment question... I own a Kubota B2620, loader, backhoe and 60"MMM. I have a chance to buy a used Kubota B2660 FM Snowblower ... can anyone tell me if this will fit...

Hello all, I have a B2620 and am looking at a Kubota B2660 Front Mount Snowblower.. Any monster problems associated with this marriage? I understand the MMM front brackets must be removed and 2...

I am really considering this. Both TLB with unloaded turfs. I love the looks of the B and the increased ground clearance. Here is what I use a tractor for on my 6 acres: 1. on grass for aeration...

Has anyone installed Top and Tilt on their 3 pt hitch for a B2620? I have the hydraulics for the backhoe, does that help the setup or do I have to start fresh? From reading in other forums it...

Thanks to reading all the posts here over the last couple of years I am realizing that I want a bigger tractor. I don't really know why except for tractors are kind of like TVs - why not have a...

B2620 with QA and 60 inch "light materials" bucket. Works good with snow and faster than the 50 inch bucket which has become my "dirt" bucket.

My B2620 HST pedal is sticking just a little but it's a big pain because when I get off the seat to change the angle on my rear blade the engine stalls because the relay switch has not tripped and...

We have app. 1.5 acres of grass, a small vine yard with 100 plants which probably will be extended to 200, some 4 - 500 yards of food plot / brush. The ground is very heavy clay! I am planning on...

I'm continuing with the research on these models... and wonder if anyone has mounted a Fisher or Curtis front blade to replace the bucket on a B2620 or B2920? I know it can be done with the B7800...

I know this is a Kubota pricing thread, but I wonder if people can tell me what they paid for various aftermarket rear blades from Land Pride, Woods, etc. Are you happy with the blade? Any...

Finally got a tractor, after 3 plus years of reading, research and saving and divine intervention. 2009 Kubota 2620 with FEL, no attachments, friend upgraded to a larger tractor, buying his...

It's 15 degrees here today. I started my B2620 and it made a strange sound at first but started and ran normally. A few seconds later I see a small amount of antifreeze on the garage floor on...

Got a couple of trees hung up back in the woods but was able to get to them and pull them down and out to my wood road. Sure makes me appreciate the small size of my tractor when trying to back...

Hi, Can some of you give me feedback on pricing for a snow blower (rear) for a B2620. Or recomendations on good models and if any other tractor mods might be necessary to run said eqipment. Thanks

Here's my homemade setup for getting some firewood off my lot. Length of chain bolted to the rear ballast carrier with skidding tongs that have a grab hook for the chain. Pick up the carrier and...

The 60 inch light materials bucket and QA is working out well for my b2620. Gives you more room for the light stuff. Hope it works good with snow. Now whee do I put my other bucket for the...

Decided to follow ChuckinNH's example and got the QA for my B2620. Also got the Light materials bucket for moving snow, mulch, woodchips, firewood etc. Will use my 50 inch bucket for the heavy...

I'm a new owner and learning to use my FEL and BH. Yesterday I dug a huge hole to bury broken concrete. about an hour into it I stowed the BH and used the FEL to move the "dug" pile. On going back...

I know this question has come up a couple of times. I took my B2620 to the dealer the other day to let them do the 50hr service and go over all my concerns about the tractor. It fits perfectly...

Hi all. Thanks for the welcome messages on the new member page and for the tons of info that you all share. It was a great help in buying my first tractor. I was in love with the BX25 and it was...

When I had my initial 50 hour service done on my b2620, the dealer mechanic said they recommend changing the engine oil and filter every 100 hrs and the other filters as well. The manual says my...

I tried the 60" MMM on my new B2620 this weekend for the first time. To my dissapointment, the height adjustment knob is practically unusable. Regardless of the setting, when I lower the deck, the...

On the ROPS hinge on my B2620 there is a nut welded on. What's it for? Thanks, John

For those that might be interested, I did purchase the B3200 loader QA, and install it on my B2620 with no problems. I bought the Kubota forks, and everything fits, and functions fine. The forks...

Well it doesn't take long to rack up the first 50 hours on a new tractor. Bought my B2620 last fall and needed to do the first 50 hour service this weekend. I called the dealer to ask how much...

Gentlemen, Just wanted to Thank all of you for the input when I was researching my BX buy. I took your comments , weighed my options and ended up with a B series instead. My 2620 showed up...

First time on TBN, I just sold my BX2200 with FEL and mowing deck looking to get a little bit longer and wider tractor for stability and of course some more power wouldn't hurt either. I landed on...

Hello All, This is my first post. I am trying to figure out what I should pay for a B2620 with a Loader. I searched other posts, but most posts have something else included (IE---Tiller, MMM...

I have a neighbor who wants to buy my B7510 and has made me a very good offer. My neighbor just wants the tractor and FEL, and I would keep my 4ft bush hog, and 4ft box blade. But before I...

Has anyone bought a B2320? Anyone upgraded from a B7500 series to a B2320 or one of the others? I've been all over the place with what to buy, but have narrowed it down to a great deal on a...

I feel like a kid at Christmas. I also owe this forum a big debt for being such a tremendous resource during the research phase. Thank you all. I ordered a B2620, TLB with backhoe thumb. Paying...

I have a 2620 with a mmm. I want to use the rear PTO while the mower is attached. How do I lock the MMM in place so when I put the rear PTO up and down the mmm does not move? Can this be done...

I am thinking about trading in my New Holland TC33DA on a Kubota B2620 or B2920. I just dont like the ergonomics of the NH (it feels like you are perched way up high). The B20 series is definately...

Still in the Honeymoon phase... Popped 4 stumps out with the BH last week while the ground was thawed. Wow..I've waited 5 years to be able to do that. Whoever invented hydraulics should be...

Finally got the ok from the wife to get a real tractor. Torn between B2620 vs. the JD2320. Tractor will be primarily used for mowing about 3 acres of lawn. Looking at the 60" MMM. FEL work will...

Finally got the ok from the wife to get a real tractor. Torn between B2620 vs. the JD2320. Tractor will be primarily used for mowing about 3 acres of lawn. Looking at the 60" MMM. FEL work will...

Greetings all... I have lurked for a few months soaking up as much information as possible. I'm a satisfied owner of a 1982 B7100 who just pulled the trigger on a much anticipated B2620 with a...

On a B2620 when you pull the 3PH lever to the top (fast lift position) should it stay there or drop back to the centre position when fully lifted? Mine stays up unless I manually put it back to...

I haven't seen any threads on the 2620 50 hr yet. I went to my dealer to get the filters and was going to change my Hyd fluid even though my book says to only change my filters and from reading...

Anyone tried a KK 6 Ft Tiller on the B 2620? Not sure what they weigh or how much HP they take to run well.. Friend has access to one. Just wondering if I can run it / lift it with the b2620...

I have read numerous times that some feel that the price increase isn't worth the extra 3 hp. My question is what can a 2920 do or use that the 2620 cannot? Can it pull a 5ft. RC instead of a...

Does anyone know what the height, breakout force and weight that can be lifted by a B2620 FEL? Thanks.

After wanting a tractor for the last ten years or so, (ok I'll admit it, most of my life), I finally got my B2620 delivered yesterday. The dealer surprised me, I didn't expect it to get here...

I was working in the woods tonight and grappled a log with the BH. This made the front end light enough that I had trouble steering. I noticed that I could use my heel on the hst fwd pedal and...

Hi, I am hoping some of you 2x20 owners can help me. I am failry new to tractors and new to my 2620. In greasing the loader in the manual it shows you the 10 grease points but where do you...

Can anyone tell me what a B2620 and or B7800 with mid mount mower and front end loader would typically cost in the northern states. Thanks! Bill

Can anyone tell me what a B2620 and or B7800 with mid mount mower and front end loader would typically cost in the norhtern states. Thanks! Bill

When I first installed the lift arm on my B2320 for the mid mount mower, I was not satisfied with the fit of the lift arm on the lower link rod of the 3Pt mount (see LiftArm.jpg). The internal...

Gents, I have been looking for a cab for my B2320 but I don't know if anyone makes one yet. I looked at the following site: Curtis - Tractor Cabs, Canopies, Sunshades, Equipment covers, Snow &...

I've been hearing a lot of good things of the new B2620. As far as the loader goes, what's a maximum weight you can lift and carry safely with this tractor? Is 600 pound too much? The rear tires...

I can't decide. I only have 1.5 acres to mow, 1/4 mile gravel driveway to maintain, a little bit of snow in central Virginia. Also 5+ acres of woods to enter and fetch firewood. Also, a one-time...

Hi everyone. I was hoping for some advise on the topic. I am a fairly new tractor operator (1.5 yrs.) and new to the B2620 (11 hrs.) The manual really does not specify what is the correct RPM'S to...

I used my backhoe for the 1st time Sunday. (received it Friday evening, had to mow on Sat). I can tell I will need some practice to be any good using it. Did remove 2 small stumps and a group...

My b2620 just turned 50 hours. Was going to change the oil, had a very hard time getting to the drain plug with the crossmember of the FEL attached. Any special tricks to getting the drain...

Just got back my b2620 with my new backhoe attached. Dealer said it would take about a hour each time to put the 3 point hitch back on. He said you need to take off your rear tires to pull the...

Could someone post a real nice pic of a B2620 or B2920 so I have something to look at until Friday? I want to set it as my background. Prefer one with the BH on. I checked the photo gallery and...

Hey guys, I need your honest opinion about the extra $$ for 3 hp on the b2920. I will be doing residential snow removal with a front mount 51" blower. I was looking at the b2620 but for $900...

Well the tractor was delivered today as scheduled. I spent about 3-4 hours in the seat in 100 degree weather and loved every minute of it. We got ours with the Land Pride 48" rotary cutter in...

I am currious if anyone else has noticed that thier 2620 has a tendency to roll/creep downhill more than other HST's. I have noticed that I have to use the parking brake an awful lot even on a...

I went and test drove the kubota today. The salesman said he would give me the corporate discount. Does this sound like a good deal? New Kubota B2620 4wd HST with AG tires and loader 60" Land...

Today was the much anticipated day... the arrival of my B2620. I got the loader, 60" MMM and the ballast box. The snowblower is on order from Kubota. I ordered the bar/turf combo tires but...

After years of reading these forums and struggling to get by with my 2WD G series, I finally bought a real tractor. I live on 10 acres of hilltop in central NY and the Winter here can be brutal...

I'm at the final stages of deciding on a backhoe. Before spending the money, is the backhoe attachment worth it? For those of you that have b2620 and backhoe, was the money spent on it worth it...

I'm looking at purchasing a backhoe attachment for my 2620. Any recommendations? How do you attach the hydraulics? Does that usually come with the attachment or should I start looking at...

Well, the waiting is over, and the B2620 arrived this afternoon. Here it is off the truck Let's see if this thing works? Yes, boys, and girls it does self feed! There is another brush pile over...

Has anyone replaced their 3ph turnbuckles with the telescopic stabilizers? What older model tele's will fit the B2920 series? I know a number of members did this to their B7510's and B7610's. Are...

I'm looking to buy a 4WD tractor to landscape my house - just can't stomach paying $70-100K to a landscaper. Figure I can landscape for $20K in materials + the tractor cost over a year (and quite...

I have had the loader off and on 5 times now. Today I tried to put the loader on and cannot get the Blue and Red from the loader to connect to the tractor no matter how much I push them. The...

Hi... I thought there were only a JD and a Kubota dealer within 50 miles of my new home... turns out there is a big Kioti dealer too. I was set on a Kubota B2620 HST with Landpride RC1548 rotary...

Hi I have been lurking on this board for quite a while. After months of thinking about it, I am finally ready to buy a tractor (my first if you don't count a lawn tractor!), for my 9 acre spread...

Have BX2000 with FEL and MMM . Have done a lot with that little buddy. Hate to part with it. It will be like losing an old friend. But, 4 years old and although nothing wrong with it, I...

Hi there, Just put 20 hours on my new B2620 HST. However, I'm somewhat confused about how to operate the clutch. I thought that this was a two stage clutch. Push the pedal down half way, and...

Well I went to my local Kubota dealer today to "look" at a tractor. I was actually decided on something like the B2320, but my dealer didn't have any. He did have two B2620's, with FEL sitting...

I live in Ontario Canada on 3 acres of woodland but my access lane way is 1/4mile long with VERY steep hills. I need a tractor with a front mounted snow blower to keep the road open in the...

I'm down to these 2 models and was looking for opinions. Will be used for general maintenace ( clearing, moving fallen trees, stone work, cleaning up a 1500 ft driveway in both summer and winter...

I've been having a problem more and more often with by B2620 shutting down once I leave the seat. I know, you are all thinking I left the PTO engaged, but that is not the case. My dealer gave me a...

Here are some of my notes comparing the smaller Mahindras to the new Kubota B2620. I thought I had my mine made up and was leaning towards the Mahindra 2015/2710 combo until I talked to a...

B2620, 364 loader, 60" MMM, 50" Landpride Reverse tine tiller, loaded R4s - $17,232 Tractor loader and mower with loaded R4s - 15,800 Tiller - 1,432 This is not for me, but for my brother in...

I'd like to get top-n-tilt for my B2620, but am unsure of the best approach. This is a topic I brought up before about 3 years ago when I was considering buying a B7610. I didn't purchase then...

I am about to buy a B2620. I plan on getting a fel, bb and cutter. What other add-on's should I ask the dealer to throw in? I have read about chain hooks on the fel, higher amp alternators, arm...

The toplink that came with my B2620 is rather short (about 17" when not extended). I bought a medium sized replacedment at TSC which is 21". However, it won't attach to the tractor. The space...

I just attached a 7' KK landscape rake to my new B2620 and noticed a couple of problems. When I first hooked it up, the tube running from the 3PH triangle rake pivot point (not sure what this is...