kubota b2320

I am looking for an add on step to assist getting into seat. With belly mower I am good but without belly mower my age is making it harder to pull my self up. I have seen a step for B2600 series but nothing for B2300 series. Any Ideas?

I have a Kubota B2320 hst tractor my grandson got a piece of plastic bag stuck in the oil dipstick tube. For whatever reason he said he wanted to clean the oil dipstick tube so he wrapped a thin piece of plastic bag around the oil dipstick and put in the tube . when he pulled out the the...

Hi All, I have a B2320 and would like to add a belly mower. Unfortunately, the specified RCK54-29B and RCK60-29B are both out of stock at every dealer I have tried as well as seem to be unavailable used as well. I have been able to track down an RCK54-32. I'm wondering if anyone knows if this...

40 amp alternator - B2320 kits There are 2 kits the 7324 and the 7311 Do you know what one will work on the B2320? Thanks Glenn

Seems that we get past one thing and question another. Sorry everyone, but we are newbies to the tractor, so please bear with us. Our B2320 has a belly mower that works beautifully BUT after using several times, we are finding that on 'hard' turns, the tractor 'jerks'. We have tried it with...

Excellent shape, new front tires , quick hitch,Piranha tooth bar $6500 think 400 hr price out of line or about right?

hi people, i will change oil on my tractor kubota B2320, but i dont know whats oil used in gear box, can use Kubota UDT, Super UDT, or Super UDT2?, here in Brazil have, Mobil, John Deere Hygard, Texaco and Shell, which of these oil good for my tractor? can someone help me? Mobil 424: Kubota...

Hi Guys, my name is Edson, i will changing air filter of my Kubota B2320, But in Brazil only find OEM Kubota Filter very expensive value, I found in Ebay EUA a filter Fram CA9248, this is filter is Good or no?, could someone help me please?, I don't want to damage the engine with filter bad...

Notice this small leak from RH front axle (wheel hub) leak is where white paper is This easy or not so easy fix. Again very small leak but may as well fix it now

Kubota B2320 with 60 hours 4wd Gear drive 3 range transmission (H-M-L) R4 tires Front weight bracket with 3 Kubota weights Mid PTO (and rear) Folding ROPS This is a pre emissions machine Stored indoors since new Located in Eastover, SC This tractor in genuinely "like new" $9500 Please PM...

I purchased a B2320 4wd, gear drive, R4's, weight bracket with 3 weights... No FEL It has 60 hours, has been stored indoors and literally looks brand new. With the L2501 I got from the same estate, I now have 5 kubotas (B2320. L2501, L3301, L3560, MX5400). But you can never have too many...

I have a Kubota B2320 that I purchased new in 2010. I have never had a 3 pt. problem before. However, now the three point settles to the ground more often than not, even while running. I know most equipment will settle when not running, but this will do it even while running making if very...

My B2320 with la304 loader is in another town. I want to store it in a smaller enclosed cargo trailer for winter. The trailer is 12' according to its model but I measure the inside of trailer at just under 13'. Will it fit? Can someone measure their setup? Specs say tractor is 93.9" without 3...

See Photos. This is the plug above the shaft the runs to the rear. I think it is the clutch housing. The plug at top of photo is split and leaking. Cant find a part # on any parts diagram i search. Any suggestions? Thanks Glenn

Hi Fellas, Haven't been on here in a while because the Kubota just keeps on running. Going on 9 years old with almost 500 hours and by far the best purchase I have ever made. With all of that said, I was cutting the grass the other day, pulled up on the deck raise lever and got sprayed all...

I bought a 2010 Kubota B2320HSD with 256 hours on it two weeks ago from my local Kubota dealer who took it in on trade. They delivered it today and when he took it off the truck I saw a puddle under the back, it was hydraulic fluid. It came from the hose connector that serves the 3 point hitch...

I’ve got a B2320 HST, FEL. Had it about 7 years and it’s maintained and sees little use, mostly bush hogging and FEL pushing and lifting when I trailer it 800 miles to my hunt property in NW ONT. It’s only got about 130 hours and has been pretty much flawless. Today I was simply running down...

Yesterday I mowed with the B2320 for several hours, turned off the engine for an hour or so, and when I returned to start the tractor up again nothing, no clicks or any other sound or lights on the dash when I turn the key, and no headlights/turn signals when I try the light switch. Battery is...

Last year I had issues with lifting my mmm all the way up it would bind the 3 point and always be lifting. To lower I would turn off engine and lift repeatedly and the 3 point would slowly lower until it was no longer bound. I adjusted the adjustment arm so that it would limit the up just...

So when I turn on my headlights my turn signal indicator lights on the instrument cluster will illuminate but not flash, when I turn on each turn signal the opposite indicator light will go out, the appropriate indicator light will flash as expected and the turn signal light will flash as...

Greetings gentlemen. Im selling my b 2320 looking for opinions of a fair price. Its a 2013 B2320 hsd 110 hours, heated Curtis soft cab, 304 front loader, 60" kubota power angle front blade, turf tires, 4 wd, 3 range hydro. Im the original owner, machine is in great condition. I was thinking of...

Hi folks, Great site, been doing a lot of research and I'm now on my way to pulling the trigger on a B2320 with some implements. Wanted to get some thoughts on the selections and also price that the local dealer is offering. $12,442 - B2320DT Manual $2,400 - LA304FL 48" pin on bucket $7,800 -...

Right now I'm mowing my yard, fence line, around barns, corrals, etc. with a Kubota L4600 and a 5' brush hog (rotary cutter). With the canopy, mowing around trees is an issue as well. My property is sandy, sloped and, rough due to ground moles and ferral hogs. :smiley_aafz: I have used my...

Looking at purchasing Rtr 1250 for my Kubota B2320 anyone have any experience with pairing these up? Kubota specs say that the max weight for a tiller is #430 and the rtr 1250 comes in at #435 anyone think this would be a major issue?

Hi all, I have sold my house on 3 acres and have moved to a much smaller place (1/6th an acre) and no longer need my Kubota. I still have a farm with my parents and brother where we have 3 Kubotas so I will still wear an orange hat! Just no need for the B. I bought the B2320HSD new in 2010...

B2320 HST 4wd, 650 hours. Never had a problem with it till this last month. It's happened last 3 times I tried to mow. Grass is low, your typical lawn. Starts fine and begins to mow as it should and then all of the sudden loses power, I disengage mower and decrease throttle and it acts like...

29" long 8.5" wide at the widest part...6" thick the top piece is 29" long 3" wide and 4" thick...Thinking little over 500 pound?

Hi All, New guy here hoping for some advice. I have a Kubota B2320 with backhoe and loader. Just purchased the Sabre Samurai sickle bar cutter. I incorrectly assumed I could run this thing off the backhoe attachment but when I plumb the lines to it it doesn't work. I assumed the backhoe...

Hey guys... I have a B2320 that I replaced the ignition switch on at 24 hours, and now the new one has taken a dump at 48 hours. So, I have ordered my third ignition switch. Anyone else seen anything like this?

Hey guy I just picked up a 2015 B2320 TLB, and was wondering what are some popular attachments for it and if adding the quick attach loader (skid steer style) is worth it and how much it adds in weight really,,, also I really would like a box blade/scraper, and am wondering what size probably in...

Hey guys, I've been tractor searching for quite sometime now and I found a 2015 b2320, hydro,4x4,122 hrs with backhoe, r4 tires,, and is in very good shape,,, the owner is asking $17500,, does that seem like a fair price, and any idea what and how long is left on warranty, were they 5 years then...

Hi Everyone, It is a pretty daunting task it is shopping for a front quick attach for my B2320 I called my local Kubota dealer and they priced out a Kubota Quick Attach for about 450 dollars. Most other places (on the Web) are in the 850 to 900 range for just the Quick Attach. Do y'all know...

Any one have a opinion on what a Kubota B2320, 2014 back hoe would be worth and any information on this model appreciated. How would it compare to a New Holland 1720?

When tractor is at 1500rpm or more I hear a hum coming from what seems to be the hst. Is this normal?

Hi, So my dad was using my b2320 and accidentally used the pto lever instead of gear(hst) lever and it grinded Should I be worried about internal damage!?

Can anyone recommend a trailer make and model to haul my Kubota B2320?

I need to trailer my Kubota B2320 for the first time. I am looking for advice for tieing the tractor down securely. Also wondered if anyone knows where I can purchase front tie down brackets. Or is there a better way to tie down the front?

Hi guys Its my first time posting to this forum so if I break "write up rules" or something just let me know.. I wanted to initially buy some metal forks for just moving pallets of wood, tree limbs that get cut down etc, but soon realised that the quick attach for the 2320 (doesnt come stock)...

Haven't been here much lately: I was browsing the other day and noticed I hadn't mentioned my B2320 for 4 years! Asked all kinds of questions here before buying it, a couple more after purchase & then 'bam', I just used it. So a quick update that might be of interest to those considering a B...

Hey gang, I usually rip through projects from start to finish and never stop to snap before and afters. Since this is my first project using my B2320, I decided to slow down a bit and take everyone along for the ride. SITUATION: Wife is tired of the old fire pit. MISSION: Build a new fire...

I just got my Kubota B2320 back from the dealership after having a Loader valve replaced @ 50 Hrs. see link http://www.tractorbynet.com/forums/kubota-owning-operating/304776-b2320-bucket-wont-dump.html Started moving some dirt and the loader seems to have significantly less power than before...

I asked my local Kubota dealer if I could put bigger cylinders and if necessary a a pump to increase the load I can handle. He said the changing the cylinders will tear up the pump which thinking about it sounds about right because of the pumps ability or lack of to keep up with the flow...

I need to dig a 30 inch wide trench. Anybody know of a manufacturer for a 30" bucket for kubota L304 FEL on B2320? And yes, I know the tractor is wider than 30". I'm hoping to drive along sides of trench and if it caves, I'll clean it out. The reason I want 30" is stronger digging for smaller...

Does anyone know where I can get a REASONABLY priced adapter for the L304 so I can use other attachments like tree scoop which is what I need to use ASAP on my land to move a couple dozen trees I planted from bare root 5 years ago? None are too large for the tree scoop. I have found adapters for...

Hello all, First post here after lurking and searching for some time. I live in S. NH on 2 acres split evenly between woods and lawn. In looking at several brands online, I like what I read about Kubota. A good friend has a 2013 B2320 that he has offered to sell to me. I have used it a...

I folks I have a 2012 B2320 with 300 hours on it, yesterday. I noticed both front axel seals leaking, is it a big job to change these seals? Any special tools reguired? Lea

I have a 1/4 mile gravel road and a tight spaced crushed stone driveway. Current snow weapon is a B2320 with the 48" bucket and a 72" grader blade. If we're expecting more than a foot, then I'll throw the 3pt snowblower on. Machine is equipped with the SSQA and have been thinking of adding a...

Please help my Kubota only starts when I jump it but if I use anything electrical after jumping it, it stalls and wont start again unless jumped. The battery says it has a full charge & I tested it. I also cleaned the battery cables. I know it is something simple because the previous owner took...

I have a Kubota B2320 HSD that I purchased in December 2014. I have been searching how to change the hydrostatic/transmission fluid and I have not been able to find anything showing how to perform this service. My tractor just hit the 50-hour mark and I decided to complete this service myself...

I have the need to be able to store round bales of hay for my mules. In the past I have easily moved them with my 3PH and hay spear. Now though, I am getting a super deal on some fescue and with the drought that is anticipated for the rest of the summer I am gonna get a WHOLE BUNCH of bales...

Some days my TPH and MMM deck is hard to lower. The lever acts like it does not want to go in the lower direction. I raise the seat and the lever flexes and sure enough it is not rotating at valve. Does anyone know what to start looking for? B2320 is only 1 year old and has 116 hours. Maintained...

hello, I make the first oil change my tractor Kubota B2320, in Brazil not sell original oil Kubota, I'm with much doubt, someone can help me in relation of the oils below: Shell Rimula R4 API CI-4, GC-4, 4-CF, CF. Shell Rimula R3 API CH-4, GC-4, 4-CF. Tection Castrol 15W40 API CI-4 / SJ...

I don't use my tractor very much. Started it up three weeks ago and used the tiller on the garden spot. After an hour the tractor quit running. Happened to notice the fuel filter cup was close to empty when it stopped running. As soon as it stopped, the cup began to fill back up. I let it...

Old battery failed, wouldn't charge, so I got a new one, charged it fully. Battery light on dash does not come on, no sound at all when turning key to start. Fuses are all good. Tried all positions on PTO, clutch pushed or not, can't find any dangling wires.

Realistically, I have a little more than an acre of pasture to care about, a large gravel driveway and then some nice lawn/garden. I sense the B23xx is already overkill but as my pasture is quite hilly, I want something more than a BX. Any recommendations in that series range? Also, I've had...

Hey, So I want to buy a Kubota B2320, the specs have the width at 45". I want the tractor to straddle 36" beds and the tires to fit down 18" paths. I think this tractor will work but what do y'all think? And is the width of a B2320 adjustable? Thanks!

Hi, I am new but have been reading some forums and would appreciate some advice. I am in the market for a new compact TLB setup. I have 40-50 post holes to dig in rocky soil, I want to clear a piece of land for a garage, dig the foundations, etc. I also have to build some driveway to my new...

Hi all, I just joined because with any luck I'll be a legitimate tractor owner very soon. I'm working with a Kubota dealership close by and so far they have been great to work with. Service, parts, and sales manager have all been very helpful. I was quoted a price that I think is pretty fair...

I was at the Kubota dealer today and they asked me if they could come look at my tractor and give me a actual quote of value. Heres what I got B2320HST R4's LA304 loader, Land pride RTR0550 tiller,BB1548, hardee brand 48'' bush hog. I bought the tractor with the idea of using it on our larger...

I'm trading in my B2320 on a new B2301 and the dealer dosen't want cab, so I'm going to sell. Keeping the plow for my new tractor because I think it will fit. Cab is in good shape and has console with swiches,fan, am fm radio, wiper front and rear and beacon light. Will try to post picture soon...

After adding lights. radio, and heater. The stock magnetic alternator does not keep up. Do they make something that is that small and produces more amps?

Does anyone know if I can put a 3 fonction valves on the loader for a grapple on a b2320?

Hello all! Although I've been a long time lurker on this site, this is my first, but surely not last post. As a jack of all trades (master of none) I have found a lot of very helpful information here. After years of rentals and borrowing friends equipment, I have all but made the decision to...

So checking over tractor doing greasing rounds and I notice this.the wear on the housing is cause by a loose ball connection on a cheap 3 point auger I lent from a friend. No big deal I can replace the housing. I found a high spot on the casting of the auger pto shaft coupler so I'll gringo it...

We have a fairly new B2320HST and I'd like to get a front snow blower for it. From the 2013 Whole Goods catalog, there are two blowers listed for this tractor, the B2781B (51") and the BX2750D (50"). The B2781B (51") $2900, while the BX2750D (50") lists for $1977. So I'll go out on a limb and...

Sold the B7510 with 3200 trouble free hours and bought a B2320 this spring. Tractor is working great, love the three range gear transmission compared to the 7510 two range but was wondering if anyone who has one has had cavitation sound when idling. Did the 50 hr. trans filter change and changed...

looking at a 2013 B2320 Hydro 4x4 R4 tires at local Rv dealer they also sell used tractors. The B2320 has 7hrs they put a brand new loader on it asking $13500. What do yall think? Is this a good tractor? Is this a good price? Thanks for any help!

It seems nobody is happy where the "Standard" location of these kits are installed (on the outside of the ROPS). I tried something a little different than other folks. I flipped the remotes upside down as I moved it inside. I think it worked out nicely. I think if I didn't flip it, it would...

I have a 2008 Kubota b2320 tractor. It has 274 hours on it. Not long ago it would not start, no click and no power. I replaced the 30 amp fuse and that seemed to fix problem. Now again it will not start, but has power and will click when you turn key. Any suggestions/help would be greatly...

So I've had my B2320 w/ canopy for a little while now and am really enjoying mowing the pastures and yard with this thing. I noted that although a little quieter than my L3000DT it still makes a good bit of noise. When operating any machinery that generates a good bit of noise I always wear my...

Been looking for couple of year now, finally found what I think is a good deal. 2008 B2320 (350hr) FEL, Tiller, and Bush Hog (4') all in great shape. Got it for $8500. Can't wait to learn to use the FEL. The owners were great folks..They just didn't have no need any longer for it.

I have sold my B2620 and still have the Work Shop Manual that I purchased from my Kubota dealer new for $80+. Seeing I no longer need this I figured I would offer it here for sale for $50 plus shipping in the lower 48 states only. Not sure if I can list this here, as I have sent several PM's...

I have a 1998 Kubota b2320 with 274 hours. Has power, you can hear it click., but will not start. 2 months ago this happened, but did not have power. Some guy wanted me to give him credit card info to troubleshoot. I am not stupid. Western Implement in Lubbock, Tx would not give much info...

After waiting for a couple of weeks, the new tractor arrived yesterday. I have a new B2320HST with a 60 inch mid mount mower. This machine will be used primarily for grass cutting duties around the house and in the pastures. It will also be used to pull the 50 bushel manure spreader as well...

Just changed fluids and filters on the tractor for normal maintenance. I changed the hydraulic suction and HST filters and drained all hydraulic fluid. I put in three gallons of Super UDT2 fluid and ran the system by turning steering wheel max both directions and cycled the bucket numerous...

I was moving a very big pile of stumps from clearing land to build my new pole barn. I poked a stick into the grille which is basically a plastic holder with a metal screen. The screen is bent up but looks like it can be reshaped. Because the screen is bent up the plastic holder and screen...

Based (at least in part) on the advice I received in http://www.tractorbynet.com/forums/kubota-buying-pricing/315250-b2320-advice.html, I bought a B2320HSD with R4 tires, grill guard, front weights (4@ 55 pounds each), and a 4' rotary cutter. I will be using the tractor along with the cutter...

Hi guys, Putting feelers out to see what my B2320 is worth to sell outright with all the accessories. Has 240 hours now and still runs like new. I am hoping to downsize to a BX once I am done with the backhoe work. Everything on it is in my signature and always stored inside. Big question is...

I am seeking advice on connecting a log splitter with an open center valve to the FEL connection block of my B2320 HSD. I have researched this on this site and others but two questions remain: 1) Will it harm the loader valve by keeping it open with a bungee cord? 2) Does it matter which...

I have been working my now year old tractor pretty hard clearly the land to build a 40 x 60 pole barn. The B2320 has one odd thing that happens. While backing up the tractor will suddenly shut down the engine. Mostly while I am leaning left. I traced this down to a mispositioned seat switch...

Hiya, I'm talking to a dealer tomorrow about a B2320 with a Mid-Mower. It's currently setup for just mowing which is how it will stay however, I have been reading posts that say the tractor is quite light for it's chassis size which is concerning for me. Several people have posted that it will...

I have loved the B2320 we bought new in 2011 but im at a cross roads of sorts. We bought a home place with 20 acres mainly fields and some woods with a half mile drive the will need work in the years to come. I would like the abllity to plow and disc fields to plant better pasture grasses for...

Hi, I'm looking at tractors, shopping for used units and would like a loader and backhoe. The machine will be used for general property maintenance on my 13 acre weekend retreat. Much of the land is wooded, but there is an area that used to be a horse field (maybe 20 years ago, now very over...

I am contemplating buying a B 2320HSD to maintain portions of my farm that I cannot access with my utility tractor. I have a loader on that tractor and do not need a loader for the 2320. I will buy a 4' rotary mower and plan to add a 50-gallon sprayer and a chipper-shredder in due course. None...

I want to use my B2320 to mow a couple of feet over the bank (straight out, not down the bank) to cut back briars and other fast growing brush that can hang over my mowing area and make seeing the edge difficult. I only need a couple of feet - anything longer and I'll be mowing from the road and...

I've been focusing on Kubota B series primarily because they are only only dealer of any size who focuses on tractors within 75 miles of me. I'm really getting hung up on new vs used. I have found a 2009 B2320 HST with 65 hours with a FEL and MMM for $12.9K (haven't offered less yet) that is...

Hello - I have a B2320 with a 60" MMM and cannot seem to get the deck level on all four corners. I've adjusted the 2 leveling brackets at the rear of the deck as well as the turn buckle bracket in the front and no matter what I do the right front corner is 1/2" lower than the rest of the deck...

Looking at a new B2320. No real prior experience with them, except operating an old BX18 with a snow blower briefly. A dealer around here agreed on $16K for the unit with FEL and 60 MMM. Is this about what you guys are paying for a new one today? Barlow has a better price, but the distance...

Just read the thread about the correct size Bush Hog to run with a B2320 Tractor. Looks like a 48 inch light duty Bush Hog is the best match for size/weight/PTO the B2320 tractor has. My question is - will a B2320 with a 48 Bush Hog cut tall heavy grass/weeds mixed in with a few under 1/2 inch...

Well the family and I moved to our new home place 19 acres. Half pasture half wooded. I have a b2320 and have been looking at bush hogs. I know manufacutre says 48" for hp and weight reasons. I'm looking a a bush hog sq148 if I can find one seems they stoped making this model. Or a bh14 48"...

I've got about 5 acres; two is lawn and the rest woods/alders. My plan is to use the tractor to convert an acre of existing rough to gardens/lawn and then use it for mowing everything and doing general gardening work. I cant make my mind up between a B2320, which would probably be better at...

I'm shopping for a Compact TLB. I've been looking at Kioti because they are close and seem to have good specs. I'm also checking into Kubota (B2320) since they seem to be the breed standard in this class. My Kioti dealer is saying the CK20 is every bit as powerful as the CK2510, even tho the...

I'm looking at a new 2320 Kubota with a 60 inch belly mower and brush guard. I live in KY the best price I have received is 12.5k delivered, does that sound about right for my area.. I was also wondering what size bush hog is best for this size tractor a 4 or 5 footer .. Thanks . Jeff

Can't seem to find this anywhere online. If someone has a book they can look it for me please?:D I would like to know the ground speed of the B2320 GEAR tractor at pto speed in 1st gear in low range. As in how slow can it go while tilling. Thanks!

My dealer only has a couple B series tractors in stock right now, unusual for them, must be selling well? I want to trade a 2008 B2320 including FEL, with 140 hours on it and a Ferris IS1500Z zero turn mower in excellent condition. Dealer said my equipment plus $3,500 for the new B2320 with...

Hi everyone I am going to buy a tractor Monday. I am torn between the smaller Bx2360 or Compact 2320 What I have is 2 acres half flat and half somewhat sloped . I want to use it to plow a small area some trenching , clean up push snow. Lite lifting and general farm work. I have driven both and...

I was moving wet heavy snow today and the loader bucket suddenly would not dump. It was like the lever wouldn't even move as if it was jammed or something. I removed the cover and didn't see anything wrong with the control linkage. I even removed the linkage and inspected it. Here is a...

I'm getting close to the 400 hours on my B2320 DT. I'm nervous about the transmission/hydraulic fluid change. I like to do everything myself on all my vehicles as much as possible. But, I'm almost thinking about sending it to the dealer for this. Changing oil on a vehicle means quarts but this...

I have a Kubota B2320 that is a 2011 model with 120 hours and has a front end loader. I have noticed an increasing-- alternating squealing, or whining sound, coming from the front of tractor, like under the oil pan. When it first started, it made a sound like a stick rubbing something and the...

Hi, I have a 2011 kubota B2320 Hydrostatic with 4 wheel-drive. When the tractor is in 2wd and you press the forward pedal the tractor just barely moves forward like it is under strain, it just does not want to budge. However, if you press the reverse pedal the tractor seems to work fine in...

Hi, I have a 2011 Kubota B2320 Hydrostatic with 4 wheel-drive. When the tractor is in 2wd and you press the forward pedal the tractor just barely moves forward like it is under strain, it just does not want to budge. However, if you press the reverse pedal the tractor seems to work fine in...

I have read the forums quite a bit reasearching things etc before buying implements and even before getting my tractor I also have a JD440ic idustrial crawler that I am probably going to sell this summer I have had it for probably 10 years. I started raising goats around the same time I got the...

Mornin'! Was wondering if $11,000 is a solid price for a B2320 with 400 hours, front loader, and rear scraper? Looking at some comps (country-wide) and it seems somewhat comparable, but was looking for some extra expertise. Thanks in advance!

Mornin'! Was wondering if anybody had any opinions on the difference between these two machines (besides the stated HP and speed). They are pretty much the same in price...we have about 4 acres, 1 in lawn to mow (nothing fancy, just rough grass seed), and the other 2.5 for a sloped grove and...

Looking to pull the trigger on a mower this week. We have a home on just under 19 acres. The back half of the property is still "untamed" and will likely remain so for awhile. The front half has a 5+ acre vineyard (which is why I opted to NOT look at a zero turn). After talking myself into the B...

OK here is my first post, I purchased this B2320 last summer. While ploughing snow this winter I noticed the factory headlight were not that great, if you raise the bucket to do anything. It is lights out. So I did a bit of research on this site and got some great ideas. Thanks to all those...

I am not understanding how the 1/4 inch valve function works on this tractor. I move the lever to the position shown in the operators manual and the 3PH raises rapidly several inches. I operate the lever to the stop very quickly but it still raises too high. Is there an adjustment or different...

:eek: Just bought a used kub b2320 with 80 hours, the dealer was prepping for delivery and discovered the housing that the oil filter screws to was cracked. They are replacing the part but this is kind of a major motor teardown no?? Should I be worried? The dealer claims to have kubota certified...

I recently snugged up my parking brake on the B2320. Maybe I tightened it too much. Before the adjustment, it was slipping when I set the brake on a slope. After adjusting, it stops immediately when I let off the HSD pedal. Is there such a thing as too tight, so that it may be engaged slightly...

I'm pretty much done with the year's field mowing but still have a few unmowed odds-and-ends spots that are hard to reach with the 50 HP tractor I usually mow with. The B2320/HST manual recommends a 4 ft. mower, but I'm guessing that if I stick to level ground, avoid the tough places, and take...

Hi Folks, how do you install a rear remote on a Kubota B2320? I have 2 fittings from the dealer. he pointed at the locations where they go, but, any assistance would help. I have the remote and the hoses. thanks

Hey fellas, it's been probably 2 or 3 years since I've posted, but I'm in need of some advice. I recently upgraded form my beloved BX1860 to a B2320. I loved the BX and did about 100 hrs a year on it, but just needed something a little bigger. I use the tractor to maintain my motocross track...

I am looking for a little guidance on a problem with my B2320. The tractor is a 2010 model with only 79 hours. It has never been abused in any way, has always been stored indoors, and still appears absolutely new. After mowing the tractor was shut down as normal. A couple hours later when I...

I bought rear wheel spacers and tire chains for B2320. The spacers are 1.5 inch thick and come with long wheel studs. How do I remove the original wheel studs so I can install the new ones? Thanks

I'm investigating replacing my 1981 mitsubishi d1600II (same as a satoh bull) with a modern tractor with a loader. I have a kubota and kioti dealer in town, so I'm trying to decide between the two. I'd like to get some opinions on the two if possible. Kubota's b2320 and Kioti's ck20s, both...

I've been trying for years to get my boat out with something less than my Jeep. I decided to give it one more go. Before using my new Jeep which I really didn't want to cover in sand just yet. Loaded up front end loader with wet sand. Weaved ropes on front tires as a wimpy chain (I don't...

First real tractor showed up this morning! Put 2 hours moving compost/dirt already I did have a question about the field mower. It makes a fairly loud vibrating/scraping noise hike running is this normal? Don't have any experience with field mowers just lawn tractors Also does...

Ok I know there are thousands of orange vs orange posts and I have seen a few close but want to ask someone who has had to make this decision and why. I am looking at the kioti ck20hst or kubota b2320 both with fel and a 60" rear finish mower. Prices are kioti 12800 and kubota 13800...

I thought I'd post some photos of modifications to my Kubota B2320. Although these are not nearly at the level of what other TBN members post, I believe that I've had a few good ideas. To start I added this piece to the ballast box...

Looking at a new B2320 with FEL and 4ft field mower. Dealer price is 18,000 delivered with Tax(no ag exempt) I found one other dealer and got quotes within about 500$ of this. Just wanting to double check before I pull the trigger.

I have a Kubota B2320 and have great difficulty changing implements. The stabilizer setup, with turnbuckles and hooking up on unleveled ground, is the main problem. I have considered a three point quick hitch attachment, but the equipment--finish mower, landscape box, rock rake, and tiller--are...

B2320, 70 hours, 4 years old, no history of battery issues, battery cables are clean and tight. B2320 wouldn't start, no power, not even turn signal or emergency flashers would come on. Battery voltage measure at 11.4 V. Jumped battery with car battery, B2320 started up easily the first two...

Do you guys think there be a noticeable difference in the mowing ability of a b2320 and a b2620 both using the 60" mmm on a long gradual slope. I mow about 4.5 acres. Would the three hp come into play here. I think the driveway work would be a wash as well, mostly grading with a box blade and...

I attempted to raise my deck to the top position tonight so I could mount the backhoe on for a quick dig. Wouldn't go any higher than 4! Felt like if I twisted any harder the knob would break. I know others have had this issue, any suggestions? Thanks!

I'm looking at buying a B2320 and was wondering about which tires to get. I will use it mostly for mowing with the occasional bush hog'n, firewood, and snow removal in the winter. The big question is, do the R4's tear up the grass much when turning under normal mowing conditions (speed...

My Kubota B2320 tractor has been shutting off while mowing. It will shut off and then start right back up. Will do this several times during a 2 hour mowing. Then I can use it to mow for 2 or 3 hours a few days later and it will run fine. Anyone have any idea what might be wrong?

well looking at getting a bush hog for me B2320. My uses are clearing woods trails cuting sapling and underbrush. Im looking at the Bush hog brand SQ148 and land pride RCR1548 or a 1248 Any Ideas or feed back on either of these models? I dont line how the LP RCR1548 had a rubber wheel in...

i could use some advice, not so much invoking brand debates, but rather tractor size and HP. i have 10+ acres of hills woods and some meadow. will want to be able to get thru my unimproved woods to clear some trails. but also will be bush hogging a few acres of the meadow. both of these...

I'm having a dickens of a time ID'ing the transmission strainer (screen?) on my 2010 B2320 HSD. At the first 50, I changed the hydraulic oil & filters but never did ID the strainer. Is it possible Kubota did away with it, or did I just miss it? I'm coming up on 100 hrs & am seriously...

Will a model 2782 snowblower off of a B2630 fit/work on a B2320?

I've started a build for a SSQA for my B2320. ATI has one listed for the B3200 but for around a $1000, I can build it far cheaper and enjoy the project. Some may argue that its benefit on the smaller B's is useless (weight factor w/ skid steer implements) but I have several implements that can...

I want to store attachments and a ride-on lawn mower on industrial shelving, those typically seen in HD/Lowes. It would be more convenient to place the items on pallets then lift them to the desired rack but with the heaviest item (lawn mower @ 450 lbs.), do you think clamp on bucket forks would...

what is a good price for a kubota B2320 , reliable and where can i get one easy shipping

well I emailed messicks about a valve kit for top&tilt. Here are the part numbers he gave me. Im wondering if this is the kit that mounts on the rops or something different? You need B7309B (1st position valve and hose) - $700 BL7343 Stacking Kit - $50 BL7373 detent valve - $380 Or...

I am picking up a "new to me" Kubota B2320 tomorrow morning. It only has 30 hours. It does not have a mid mount mower and I was wondering if anyone has an idea of what it should cost to have one installed at a dealer. I done a little research and apparently the same mid mount mower is used on...

I have a B2320. I'm looking into setting it up for mowing, mainly because nothing beats the ride that bigger wheels give compared to the little wheels on a mower. So what have you seen for prices on the mid mount mower and a set of turf tires on wheels? Thanks, Dale

We are about to buy our first tractor, as we have recently moved to 5.4 acres of old pasture land in SW Colorado. Based on advice from the general forum, I went to our local Kubota dealer today and tried out 3 Kubotas we were considering - a B2320 (gear) and L3200 (both DT and HST). I like the...

Hi everyone! As some of you folks know, I'm looking for a first tractor and have narrowed it down to probably a "B" series, in part based on all the help from the fine members of this forum. I live in Iowa and need occasional loader work, but mainly need to mow the hay field edges, ditch...

Hello all! First of all, I would like to send a shout out to everyone for such a great forum that is full of information and is way beyond my expectations. I am new to the tractor world, so I have been perusing this site for weeks now in my search for a tractor. This is my first post. Just a...

This is a question for the diesel mechanics on the forum. The b2320 is rated at 23 hp/17hp pto while the b2620 has 26hp/19hp pto. Both tractors use the same engine. What differences would produce more hp in the b2620?? Would it be larger injectors? Different injector pump? I know, say with...

How noticeable is the difference in power when going up. Have the 2320 and like so many before the needs didn't quite match what I thought when purchased almost 2 years ago. Initially thought light loader work with mostly mowing 3-4 acres. I way underestimated the loader work in moving dirt...

Does anyone have any info on a decently priced vinyl cab for a B2320? I guess decently priced for me would be around $1000. I don't have a sunshade either, so I would have to make some kind of frame or purchase one of those too. Thanks for any info.

I use my L3430 for cutting the grass in my field but was wondering if I could use the B2320 for light cutting before the grass gets tall. The B2320 doesn't have a cab and the freash air would be nice on a nice day. Anybody ever try this combo?

I have been having a starting issue for the last few months. when I turn the key the tractor will not start up. All of the lights come as normal. Its acting like pto thinks that its engaged. I thought at first it was a temperature thing. If I let the tractor sit for a few minutes it will start...

My tractor has been greased religiously since new but I have never been able to locate a Zerk for the loader lever. Anyone have a picture of where the thing is actually located? I know it needs it because it is getting a little stiff with a load in the bucket. Thanks for any input

So I built a 12x16 pole building off of my 12x16 storage shed. With winter nearing I have been thinking about storing the tractor in the shed not under the pole structure. I do my service work on the tractor in the shed but Im afraid it may have bad effects on the sheds sub structure. The sub...

well fall is here and i decided it was time to try and get some grass to grow on the front part of our property. Im not looking for fancy manicured grass just grass. The B2320 did great as did the tiller! I did almost stall the tractor twice i didnt have the rpms high enough and i hit a very...

I cut a lot of rough ground & thick cover with my B2320 hydro & LP 48" bush hog. Three or four times in 58 hours of running I've nailed a big rock hidden in tag alders/grass or pulled up a big log into the blades & the tractor stalls before I can raise the cutter, disengage PTO etc. It then...

Two part question: 1) Can I pull it with a B2320? No clay, fairly easy dirt to work with. 2) Do I actually need it? First garden, have broken the ground with a middle buster and been through it with the scarifers from box blade. This did much better than I thought and actually looks like a...

Two years have passed so quickly. I had sold my BX1860 and bought the B2320 for just a couple simple reasons, really. I just needed the ground clearance and really wanted to get away from the whole trans fan issue on the BX. I loved my BX, I truly did. I didn't need way more tractor, just...

Anyone esle have this problem? It's the bracket that the seat sits on. I obviously have lost a nut or something but can't see a spot where something is missing. The bracket is very loose side to side and easy to move around when the seat is lifted up. Just a little confused with where to even...

Hi there, I was wondering how much weight would you guys recommend in the front of my B2320N. When I use 54" snowblower, or 55 gal sprayer my front wheels come off the ground. Tractor feels very unstable. I never ride it without buckling up. I'd like to build a custom dead weight to put it on...

Main Features/Uses: - Must be dead simple to use (I have an M7040 and its too complicated for most of my staff - long story, not really relevant to this topic). - Under $14,000 - Ability to tow light trailers (3-4,000lbs max), short distances (from bar or 3PT hitch). - Grass cutting (not...

In my attempt to understand the QIV (quarter inching valve) on my 2320 I noted that the right control lever cover that holds the stops is ruined by the stop bolts being wrenched on too hard by the dealer??? I will see if this can be replaced but I noticed a square cover on the same assembly...

Ok, I purchased my B2320 w/ a BH65 backhoe so when I took delivery we were unable to review the 3 point operation. Figuring 3 point is 3 point I didnt care until now... I was able to spend time yesterday to remove the backhoe and to setup the 3 point hardware. Not bad but not "quick" as it...

She was getting ready to mow and had a bit of half a tank [approx. 4+ gallons] and trying to be helpful added somewhere around 1-2 gallons of gasoline to the tank, bringing it up to just below 3/4 of a tankful. She then mowed for around 20- 30 minutes before she noticed that it was losing...

Seen a few posts on here about soot getting on loader arm from the exhaust, mine was no different so I fixed it by putting an elbow on the exhaust. Used an old piece of galvanized pipe, cut and brazed it.

Have a 2009 B2320 TLM 60' with 150 hours and considering the economic feasbility of trading up to B2620 TLM. Any advice would be appreciated.

There's aBobcat attchment for sale locally. It's a 907 backhoe with a 7' digging depth. I cannot find any specifications on this unit about it's weight. It's ana vailable attachment for the older 6 series bobcats with an operating weight around 3400lbs. A little bit of research says it has a...

Ran into a problem when flail mowing last night and thought I would see what the TBN community has to say. My B2320HST with 215 hrs. had trouble maintaining full 540 PTO rpm when I was running my flail mower last night. It seemed to drop rpms in the longer grass more than it used to and take...

I don't want to say you CAN'T get this thing stuck but **** every time it gets out!

Hi, this is my first posting . I installed a new BH65 using supplied coupling kit. When I unhooked the bh65s I lost lift on the 3 pt hitch. Am I missing an engagement lever. thanks in advance for any advice.

Our new Kubota was delivered a few weeks ago. I love it! B2320 w/ LA304 and BH65. This place is a great resource of info thanks to all who post.

I don't know if it's like this on the B2620 or the Hydro versions but what a PITA this was and a mess. I had a small pan ready and as soon as I saw the oil spreading across this cross member I grabbed the nearest thing wide enough to capture it all. They put this cross member for the Front...

I was hoping someone might be able to help me out with some fuel issues that I have been having with my B2320. For the past month, the tractor has been cutting out. At first, I thought it might be a seat sensor so I jumpered both of them to see if that would resolve the issue. It did not...

New to this site,,Thanks for the Welcome!!, My 144 hr Kubota 3pt lift leaks down while running,,,also when it's off,,, There is no feel of detent for nuetral pos., I've carried it back for repair and they haven't fixed it,,I've tried every position On the selector,, no change,, I have the belly...

Hi all, I have no knowledge of the Massey line up so please be gentle. I presently own a Kubota BX1850 and do to my needs changing am looking at a Kubota B2320 or JD 2320. Require MMM and FEL. Would like to stay in the 23 - 26 HP range. Tranny - HST or manual. Prefer to stay around 50" wide...

Hi All, First post here! I have a new B2320HSD with about 8 hrs on it. I'm new to HSD transmission and while running my 48" rotary cutter I heard a strange rattle (almost like marbles rattling) or chattering noise from under my seat when the tractor started to labor. I was using Med range and...

I'm looking at a B2320 narrow in the hydrostatic drive. Its 37 inches wide. The B2320 standard says it's 45.1 inches wide at the minimum tread. However I think that is with R4 industrial tires. I think the AG tires on a starndard B2320 mine bring the width down to about 43 inches from what I can...

I'm looking at the Kubota 2320 HSDN.......thats the narrow one with hydrostatic transmission.Only been out two years. Interestingly enough on the Kubota build it section of their web site its not listed at having cruise control, however the standard hydros ,2329 2629 and the 2920 all have it...

Put the loader on tonight to use the ratchet rake like I've done 50 times. Worked it for about an hour and when I curled the bucket up to get rake out of the way and lower the bucket all the way down to park, the bucket hits an abrupt stop about a foot or two off the ground while lowering it...

I have lots of hilly terian i use the tractor on and really think the use of front weights would help doing tilling work and bb work. I didnt want to always have the loader attached while doing these tasks. This is my solution... on the cheap! This is the start of my project. All materials used...

Hi All, I have a B2320 with 60" MMM. When the dealer delivered about a month ago he went to show me how the deck height adjusts and the knob/rod assembly came off in his hand. So, new parts about 2 weeks later. The adjustor knob seems loose to me. I can wiggle it quite a bit when the 3pt is...

Bought a new B2320 HST a couple weeks ago. There is a noise when raising the pulling the 3 pt hitch lever (a whining like power steering makes after hitting a stop, but the tractor makes the noise only when lifting up the 3 pt. hitch, which seems to work fine otherwise). Noise gets louder as...

Bought a new B2320 HST a couple weeks ago. I noticed the 3 pt. lift hydraulics are noisier than on my other tractors when raising the lift (noise like power steering after hitting a stop, but makes the noise all the time while lifting). Wonder if this is normal for the B's, and if not what the...

Here is my question, if your running a Wallenstein 42 PTO chipper, will you feel any difference in the chipping capability between the two tractors, I am aware that the HP PTO rating is higher on the Bx2660 but they are the same engines and one is rated at a lower RPM for HP then the other.

Reworked my lights from my BX to install on the B2320. The lights started off as the BXpanded kit. Let me emphasize there is nothing wrong with the kit as it comes. It is a great kit and I literally installed it on my BX in 15 minutes. Worked perfect. Plug and play, couldn't be easier. Now...

Does kubota offer wheel weights for a b series tractor??? My rear wheels have the carraige bolt holes associated with whhel weights but I cant seem to locate them. Or an aftermarket source suggestion would be appreciated

Just got a new B2320 delivered. Traded in the BX1860. I have a set of the BXpanded work lights I kept and want to install in the B. Anyone know where the harness for work lights is located? Does the B have the same type bullet connectors?

Hi all I have a 2011 b2320 with a loader and 54" mmm. I really like the machine and have been thinking about adding a bh 65 backhoe. Needless to say they are not inexpensive and i am wondering how well they dig. Can owners chime in and share some expereinces? I would be disappointed if they...

I noticed after I parked my tractor tonight that there was some sediment in the bottom of the filter bowl. The manual states not to service it until 100hours Im currently at 24hours. what would you guys do? I think Ill just service it now but have others seen build up this quickly? Im...

B Series R4 Tires and Wheels For Sale - Virginia The R4 tires on my B2320 that I recently purchased do a great job, but I believe turf tires are what I need for cutting grass. I considered keeping them for winter use, but I have read the turf tires are adequate in the snow. The machine has a...

Get your yard ready for seeding with the Everything Attachments Yard Pulverizer Everything Attachments Yard Pulverizer comes in a 48" and 60" and up. I'm thinking a 60" if my B2320 will pull it but I guess the 48" would do what I want with just a bit longer time. Which will the B2320 pull? This...

For me, two overwhelmingly strong points. Absolutely perfect physical size: wheelbase, width, tire size, bucket width, and lift height. Unbelievably fast loader cycle times for a machine of this size. I just wish there were more things I like about it.

Hey Guys, Sold my BX 1500 to a good home in Connecticut and purchased this B2320 from Barlows with only 27 hours. Barlows installed a new 60 " mmm and loader. I saved a lot compared to a new one purchased in VA. I did some detailing and it looks like brand new. I had some problems with the...

I took advantage of the rebates of $300 for loader and $1050 for the bx/b series tractors that is good until 31 dec and today I bought a new b2320 with la304 loader for $12,850 (excluding tax) here in central Virginia. Barrow quote was $400 less So I asked the Va dealer for a free tooth bar...

Today I was quoted $12,850 for a b2320 w/FEL excluding tax ($14,200 minus ongoing $1,350 manufacturer rebate for tractor). I went to a second dealer and asked if he would take 12,200 (less than 5% off msrp and he said no and did not even try to counteroffer. Is $12,850 a good deal or should I...

B2320 fel,mm,hoe Used pricing I am looking at an 08 B2320 with fel la304 ,rck60-29b mm,and bh65 hoe. Tractor has 87hrs and is in new condition. Owner is asking 20k. I checked around an a new one is 23,500-24,500. I told him that was way to much for the tractor. What is a good price? This is the...

I priced a remote kit from kubota and Im not willing to pay the 700.00. I have a top link and a valve picked out from surplus center but I want to make sure Im getting the right valve..does someone have a spec sheet from the kubota kit that shows what the valve configuration is? below is the...

I priced the remote kit from kubota and Im not willing to pay the 700.00. I have a top link and a valve picked out from surpluss center but I want to make sure Im getting the right valve..does someone have a spec sheet from the kubota kit that shows what the valve configuration is? below is the...

Hi all, I am buying a tractor...soon I hope. I spent a lot of time looking at the BX25 and thought it would do everything I need it to do. Loader, cut grass, plow snow on my 350' drive and most importantly, install 2 200 foot french drains, clear out the creek running through my yard and put in...

I have an HSTB2320 and it comes in at minimum HP suggested for RTR 1050 tiller, delaer suggested RTR0550, but the 1050 has better warranty and is 125+ lbs heavier. Will that tiller perform with tractor for a considerable amount of use is planned.

Hello everyone, I have been using my B2320 HST for 2 years now and I am mostly completely satisfied with it except for the HST pedal sticking. I am wondering if others have had the same problem and found a solution. The problem occurs when I use the tractor in forward or in reverse. If I...

Bought a Speeco quick hitch and added a reese trailer hitch and fabricated a bar to add free weights to for counter balance. By using the bar vs. an implement, I hope to shorten the tractor up a bit and not worry about the rear end swinging around and clipping anything. I also added some weight...

New to this site so hopefully I am posting this correctly. I am trying to decide on which Kubota tractor to buy. I have very little tractor experience. I have a cabin in the mountains on a 1 acre sloped and fairly rough lot. I plan on grading, moving dirt, spreading gravel and some deep...

Symptoms : B2320 250 hrs 1. I started tractor, warmed up for 5 mins, and drove 50 ft to fuel up, turned engine off . 2. Fueled up and attempted to restart . Nothing . When key was in "on" position, all dash warning lights came on . When moved to preheat, all warning lights went off . When moved...

Need front weight for my B2320. Lots of pondering and consideration of others resolutions of the problem. Finally decided a Reece Hitch receiver on the front of my B2320 would allow me to attach weights, move trailers and other unlimited possabilities. My Brother in law is a Machinist with his...

Hi Just recently bought a b2320 with a loader and a few other attachments. I just finished assembling my b2763a front blade and quick hitch. There are two quick hitch rear brackets that attach to the tractor frame. From the schematic these look like they use the same tractor frame holes as the...

First i just want to say that I know absolutly nothing about electrical. Being color blind I try to avoid electrical work. I am wanting to install 3 lights on my B2320. 2 forward and one backward. I know how to hook them up and run the wires but my question is am i trying to pull too much...

Okay... last question regarding my decision between a BX and B. Which machine mows better with the mid mount mower (MMM)? :confused: I mow tall fescue once a week. It's fairly course grass but is my lawn. If I buy a small Kubota it will primarily be used for lawn mowing. Also I want R4...