Search results

thanks for the pic my seat and base dont look the same my swivel base is part of the base it don t look like you cane take it appart. I have it connected seem to work good .

Id say like the big truck air seat it have a small compreser that fills a air bag

what this swich call i got my sest in but dont have this on my new seat.Do i have to but it on the new seat

Did you have to make a jumper wire for your PTO swich i dint get the outer wire for the pot .Not sure if i have to use my old swich if so how did you put it back on the new seat.

Just got my air ride seat was wondering if you have a few pic of hold you added you ome swivel the seat in my l4060

Called the dealer had a good talk whit him he told me now they do have a seat for the L60 series a direct fit no mode to the floor pan same plug in. the PTO harness which you can get at a 200.00 price.But he told me if am not going to use the PTO out of the tractor i dont need it . The seat...

Here a other seat i found that ma fit good . BE Agricultural Deluxe Cab Air Suspension Seat SEA-18DCSBE

there you go the fender is a plastic clavert conecter > they are bolted on the loader frame better then on the wheels

i just did a set of front fenders for my tractor was very easy to fab 1/4 inch plat by 3 inch .Il post some pics

Well after taking the seat apart am going to try and make a new lower seat whit cloth i may bring to the upostry shop see what he charge to get it done .Am going to go whit a 4inch foam and cloth material .Will post pick .

Well i call my dealer for a price on a L6026 1700.00$ plus tax shipping .No way am going to get this the price is crazy. Then i call DARBY MANUFACTURING they sell the same seat but 2100.00$ plus shipping .Well that it no upgrade seat for me.

Well i call my dealer for a price on a L6026 1700.00$ plus tax shipping .No way am going to get this the price is crazy. Then i call DARBY MANUFACTURING they sell the same seat but 2100.00$ plus shipping .Well that it no upgrade seat for me.

Has any one else got one of the upgrade seat , also this shude fit in a L4060 right

Has any one try to fit this seat in a tractor the reviews are ok the price is good . VEVOR Universal Tractor Suspension Seat

For the price of the tractor you think they but in a better seat Can you add a pick and where we can get the Talon seat you got

Just wondering has any one up grade the seat in there L40 series .Id like to get a high back and more soft seat also whit a bit hire arm rest seam like the are rest are to low ,my arms barly rest on them . Show me what you got .

Yes it is pretty strong i have a HLa 2500 snow pusher 72 inch and it can lift that good even whit lot of snow in it . I was just wondering what was that boost kit for . I order a pressure gage ill check see what my pressure is .

That looks nice and clean good job .

Has any one do this to there L4060 ajusted the pressure on there hydraulic system . Was just wondering i saw a boost kit on amazon but not not sure if it a good idear to use that .I guess it ajusted when you get it but do you need the extra pressure.

Yep found it Thanks Went under and check for lose wire or connection but every thing look ok push all the connecter yesterday went out plow for abit and it all good .The tractor alway in a headed garage and i had to but it out for a few hr it -25 .I guess it did not like . lol

Thanks . It all bolted in place so i can take it off if i dont like it .

Dont think so .Did it today will let you no when i try it .

Here is what i found a pic of the ECU

Any one have the wire diagram of where is the ECU located

ok get back in garage this morning try to start the tractor and it did code is not there any more . Now am going to check under to see if there any lose saw a few connection some on the HST pedal and some on the other side .where shude i check first.

Funny i just found that thread i check my fuse they a test ok .Then i tryed to clear the code but nothing i keep checking in the morning .The tractor was outside -20 i was getting cold .Next door friend came and help put the tractor in the garage it nice and warm in there .

Can any one help me whit this the tractor was out side for a few hr now it will not start it givinf mw a code 20 something about the ECU no comunication

Me to , but never stop working Just got back in from cleaning snow for 3hr .

WHat you got today we are going to get tomorrow . Am in northen ontario it was -38 feel like -46 this morning am happy my tractor and trucks in the garage hope this cold stop soon. They are calling for 2 to 4 cm tonight .

I have a HLA 2500 snow pusher it works great but only thing is when am pushing up in the snow bank the snow come out of the space on top where it open and falls out on the tractor . Am thinking of making a plate to close that up to stop that ,you can see in the pic the hole .Now it 13inch...

Well we are get some more today 5-10cm looks like never going to stop And when it stops we cold drop to -35 at night .The snow pusher getting used a lot it the best thing i ever got love it.

This is cool info i just did my 2021 L4060 it was not at the right setting it was just 1 minute to fix ,Thanks for this info .Am sure lot of tractor are not at the right setting you think the dealer can make that change before the tractor leave the dealership .

Well i got my LED for my driving light man what a great upgrade love it also change my high low head light also a big change much brighter

That all good i like to see what other guy come up whit

That pretty cool was thinking of something like that also .Am using a back snow blow but thing the snow will push on the plate i have 74 inch wide .Not sure if it will hold up .

Can you post a pic of you drift cutters . Any one else have a set on there blow can you post a pic am looking for ideers .Thanks

Am going to make some drift cutter for my rear 74 inch snowblower just wondering what size steel shude i use and how long will i need to go.

After looking at it and pulling the armrest off i can make a braket but will have to cut the plastic but dont like that .I will at other way to do this .

Hum i had a look at it and ill think it over before i mess whit it .I love to frab stuff see what i can come up whit or not .

Ok is it me or seem like my armrest in my l4060 are to low , am 6 ft and look like the armrest are not usefull at all. My arm dont even rest on them there like 5 inch to low .Has any one try yo make some riser for them or some thing too get them a bit hier .Are all the seat the same .

Am looking for my head light i have work light just looking for my head light LED bulbs that are bright and fit i no they are H4 .

My front axel is not built the same way as yours i dont have the top part that turns like yours. There no place where i can add a braket

Thinking off upgrading my head lights to LED but so may kind what to pic .Need info if you have done this upgade what did you use and how it working .

well that was a fun to do came out ok

What size steel it better for this built 1/4 x 1 11/2 or less am going to try to some

It a old post just wondering if you still have some measurement you can share thickness of steel also the lenght of each peace if you have them thanks

Yes just got the drums today will get the flat bar and see what i can comme up whit .

any one find a set of fenders that will fit l60 .I was out the other day and what a mess on the tractor

So after looking at a few top link this is the one am looking to get

The spinner was on my b26 just had to keep it whit my new tractor it works good

Ok so this is what happen WHEN I WAS DRIVING to my friend the steering was not going from full right to full leaf just a bit off movement but by the time i got there the steering wheel had done a few turn on it self . Now at home this morning whit engine off the wheel wont turn but if i get...

I thing this make more sens to me i will need to look in to this .ot saying you guy are not right but give me good info thanks

Also when the tractor shot off i cane turn the wheel round and round and the tire dont move .

It on my l4060 it not only the horn button i also have a steering wheel spinner knob and it on good and but the time i got to my friend place it had when around 2 times . That a other thing that made me thing there is something not right about this .

Ok let see if i can explain this .Today i went to my friend to do some work on my way there i nothis that my steering wheel acting funny when i was driving my horn button was changing place it stated in the low place then it was going up in circle and if i turn the steering all the way to the...

Yes they do come whit the new filter got hold of the dealer he sent me a picture and told me that it has a new magnets . Thanks god i did not what to take that filter back off.. I used the vacum to hold the oil back so i din not lose much oil it work pretty good.

Ok so i just did my oil change i use the kubota 10w30 semi syn .Also did all filter change i nothis after i was done in the hydraulic filter there a magnit in it but did not nothis if the new one had a magnit in it do they come whit one or i have to use the old one . dont wont to take that...

Just did my first regen the other day had about 55 hr it lasted about 10 minute .was cuttin thegrass so the tractor was running a about 2400 rpm .

Yes i did not welde the low part so water can get out

Well got it done it great no more dirt in the hole .

Yep think am going to welded a plate to stop that from filling up am sure some other did it. A sure it going to hurt any thing by doing it.

Woundering has any one welded a plate in the lower part of the loader arm so it doesent get filded up whit dirt .It seams that if i bring the loader arm as low as it will go and go push dirt or what ever it get full of dirt .Yep am someone will tell me dont go to low but it happens .So i was...

That all good info guy thanks .But i never found the ones on the pedal under. Il have to look again.The manuel show them .

Did my greasing today for the first time today did seem like id did not find them all .Is there any grease fitting on the trottel petal , find about 9 on the loader , 2 under the front the front axcel and 3 at the back 3 point . Am i missing some.

I sure my tractor going to do a regen soon i have about 23 hr .I check the other day the regen was only at 20%.I guess il have to read up on this .

My new snow weapon got a good deal so i had to get it.Wont try it till october but that ok.

I saw T5 semi syntatic diesel is 10W 30 that same as the kubota oil i used in my b2650 and will use in my L4060 .

I try home hard ware kubota orange but it not the right orange . I no they have other farm color but never try them .Id say rustoleum the best one i like it ,dry fast nice shine and seem to last long .

The stroke on that cylinder long 16 inch id be scare to bend that if you push it out to far

IT done I try it out and it working good now

Yep but 224.99 that in USA fun and free shipping in the USA .

Yep your right am going to do it today .I guess if i do it to get 3 to 4 in extra that be ok

How much longer did that extender give you . The dealer said the other top link they can get it 24 to 32 inch that dont sound ok

I like that extender and i can weld that easy to make thanks for info

Not us still a bit to go before we see leaf on the trees At least a month .Some lake still have ice on them .

Am going to try and make a video to post it .It work pretty good . Not this week there calling for 10 to 20 cm of snow this week .

Yes i saw that but am going to check whit my dealer maybe they give me a smaller top link. Dont what to bye a other one this one new first time i try it yesterday

Yes it 34 inch center pin to center pin

I got a hydraulic top link whit my new tractor 1 month ago but like i said it only open to 28 inch . Am trying to find out if any one got one from kubota whit a l 4060 and if it the same as mind only open to 28 inch also.

Need some info on hydraulic top link for my L 4060 .i GOT ONE WHIT THE TRACTOR BUT SEEM A BIT SHOT IT 21 INCH CLOSE AND 28 OPEN .Is that ok because yesterday i used my box blade but the link does not go out enough to give me the right angle .Look like i need a other 4 to 6 inch to make it work...

I did it my self saw that on a tractor on you tube it better then the one that comes whit the tractor .

After seeing this on you tube i just had to d one also. I used 1/8 steel for the plate and 1/4 x3 in flat bar it work out pretty good and i thing it look good you don t see the hydraulic hose quick connect any more .

It works .Well finaly got a chance to try out my tree puller a bit today .Look like ti working good try it on a few tree 2 t0 3 inch no trouble at all . Going to have fun whit this still have to wait till it dry up still to wet .

Thanks Dave that was what i was thinking how it was done but better be sure .

Here a few pic of my cross over valve . had to make a small bracket to move it over a bit but now it fit good .Now do i have to blead the hose and my tree puller or just plug it in and play whit the joy stick good to go .

Great thanks for the info

Well final got my cross over valve but not sure how to install i havent played whit hydraulic much here the installation paper on what side does the hose from the tractor goes ASSEMBLY & INSTALLATION 1. Connect the hoses from the directional control valve to Ports V1 and V2 of the relief...

Yes i will but still waiting for my cross over valve also .It coming soon .

Havent try it yet wait for nice weather and we still a bit of snow here on the grown every thing still pretty wet

Well finaly got the rest of my parts to finish my tree puller . Got a 2inch bore x 8 inch stroke it open about 12 inch. got 3/8 hose x 6ft .Just got to try it out see how it goes .

Well here are some pic it almost done still have to sand blast and paint it when it get warmer outside . The steel is stuff i had here only had to go get a few piece > By the time im done it going to cost me about 550.00$ way cheaper the a new at over 2k ,one that am going to just a few time...

Yes that the one only a few bolt to take off

Oh yes that trailer had a good load . Yes i do lot of my own work i have restore 4 car and have some welding experiance frabricking stuff .Right now a doing a tree puller .it just about don

Well am doing a tree puller for my tractor . Was looking to by one but but dint find any thing close to me and i have the tools and shop to do this . Also have the time to do it and it just fun doing this stuff So far i have the main frame don in 3x3 tubing and 3/8 plate i willl post pic soon...

That is the new one in my profile just chabge it the other day

What id did is got under the seat to check how it works also got the console off then a got some slag out by adjusting the rod that going to the valve and oil it all up good . Seam to do the job it works good now and coming back to it place by it own .Before it look like it wood not come back...

Well the wire are ok in had to adjust the linkage a bit , look like it was to much to to one side , fill ok now .

yes we get some in April too , never no it going to be in the Plus all weekend . We dint get any thing close to what we normale get .

I have try to lube it a bit but will check onthe wires .

Any one ease having this trouble my bucket joystick seam to be sticking not the up and down but the curle it is hard to move side by side and not coming back in the middle by it self .

Yep got to used it not much but enough to see how it goes .I order it in Fev got it in march not to bad i thing it was fast it just the wait look longer . Am very happy whit it .

What oil in the tractor when we get the tractor

My new mode step and rear light bar

My new weapon

I used steel that i had here the top plate is a piece 0f 3 inch scare tubing just us one side the the down piece is 3/16 plate and i used a 3/4 nut to put a set screw to hold it in place I saw one on the net and i do have all the tools do make stuff like that

Id did a rear light bare to put my flashing light on now id like to paint it dark grey but am not near a dealer to get a can from them so what is the best match in other brand .

Got it for some reason it was not going in that mode no it good

How do you get to the A display HST mode to adjust the HST respond

Welcome to the forum.

Well i played whit the tractor today learn a few more thing .I really like it Big way bigger and stronger then the b2650. Did a few mod also today added a carpet ,a park brake led light and a diff lock pedal .Next it to add a rear bracket for my strobe light .Am just having a blast doing all...

Thanks that will help .Was going to print but 148 page .

Yep for front am going to run hose from the back remote cheap way to do this. Where do you go to read on change the settings

Ok i think i saw that in the manuel il have to read up on that thanks

thanks .Just one thin when i went for my ride the tractor , not sure if this is normal when i let go of the fuel pedal it fills like the hand brakes on , the tractor stops really fast .Is this ok

The dealer send me a bag whit hat key chain and few more gift

Well am finish waiting my tractor home now .What can i say it a beast what a step up from the b2650 .I never sat in this tractor before got this just online and over the phone but am glade made a good chose .Well after it got here i went for a ride at the car wash clean it up . The weather was...

That look mean and really well built ,i saw a few youtub clip and i like the way it works.

The oil i have is the semi synthetic 10w30 from kubota .But you use other brand oil does it hurt your warrantte

What oil are you using in your L4060 just wondering because i have 10w30 left over for my b2650 is that good for the l 4060 .Will i have to good whit other oil.

That a nice grapple but buy the time it get it going to cost me over 3k .

it coming dealer call they are coming a deliver the tractor by noon cant wait to see if that going to happen . For HLA 2500 84 am still wair to see .

This i what i can get here in canada they have a 10 GMP or 30 GMP what do you think in need https://www.princessauto.com/en/cross-over-relief-valves/product/PA1000000779?skuId=8688954

Yes i no but it only 4 hr from here and was ready last week .Just cant wait to play whit it and got stuff to add on also .Now the snow going it going to rain to .

Well am not happy whit dealer i call them up today they say the tractor was ready to go end of last week but the delivery truck at the garage broken down. They are trying to find some way to get the tractor to me ya right .How hard ken this be rent a other truck am sure they have other dealer...

You got a good deal .Looking at a few the one that bolton to the bucket is almost the same price as a real grapple i will look around see what out there .

what is the model number of that bucket grapple

If am going to add a plow in front whit angel . will i need Cross over relief valve to run thiis plow or am ok whit just the function from the back.

What size are does tire am get turf tire to , they are 44 x 18 - 20 inn back and 29x12.5 -15 in front . That look good

Any pics lucky you . I played out whit my b2650 all day get a few more hr on it before it go s . I will get pics up here when i get mind this week.

Well got a call from my dealer this morning .The tractor ready they are going to deliver it next week it going to be a long weekend lol

Still wait now i can get a HLA 2500 snow pusher with back drag blade 84" will that be to big for my tractor or get a 72 inch .

Man that nice tractor look like your going to have fun.

Here a pic of my current tractor till the new one come in soon i hope i added a spill gard and a cutting edge .Also have a ford F150 4x4 whit angel plow .

Will be out in the morning it coming down good now calling for 15cm HWY close also .

I was going to get Nokian but was told they are good for winter but so good in summer .But all deppent on what you are going to do whit them .So i look around and when whit turf tire , there a few guy up here in my town that have them and said there are a good winter tire and great for summer...

Am thinking of adding a front function on my tractor i have a 7 foot plow that can be angle , so id need function in the front . I look in to it whit the dealer it cost close to 1500.00$ that a bit more then id like to pay so am going to use one of my back remote i have 3 of them .Now is 3/8...

Well whit the new tractor on it way am wondering what be the best size bucket for my L4060 . Was looking at the kubota bucket they have 3 bucket but they dont have much spec on them .If any one have info spec to help me let me thanks .

Well my dealer call me i order my tractor last week and they told me today it be in about 3 week mid fev i hope there right .They told me the option i want will come in by the end of the week them get it all done the next week . Let see how that goes Getting turf tire Block heather HD bucket...

Am looking to get a L4060 just trying to get info what be better the norkian or turff .We have all 4 season here up norht id do cut lot off grass and clean snow in winter , What you take on tires .

Will L3300 rims fit a b2650 tractor the rims am looking at they say the tire on them was 21.5 L x 16.1 SL turf tires on them

Am sure this came up before .Am thinking of getting my tire filled whit foam there is a tire shop that does it in town.Am wondering if it a good thing . What your take n this did any one ever got it done and how is it . any info thanks

Need some info or help am try to get a head set setup in my tractor. I have a after market car stereo in the tractor but drying to set it up whit head phone what be my best way to do this. I don't think a blue tooth will work and cant find a stereo whit a front plugin for a headphone .Any one...

Looking to get a 3-Point Quick Hitch for my b2650 where can you get a good one in Ontario Canada at a good price .That fit good and works good

Looks like my bucket not staying up after a bit it goes back down .Can this be a leak but I don't see any wet spot on the floor. Any info be helpful . My b2650 ony 2 years old.

My bucket is hier on one side like 2 inch off on the left side .Is there a way to adjust it Can the cylinder be adjusted .Last winter I hit a rock under snow and wondering if this bent some time I try to do some masure but cant see any thing wrong .Any help will be great thanks

Small question is there a fuel shute off valve before the filter so you can turn off fuel when changing filter . Or do you have to train the tank.

Looking to but a new bolt on cutting edge on my B2650 bucket. I think Kubota sell them but cant seam to find it on the web site. Does any one in Canada have a good place where we can get them. Any info be nice thanks

Was looking for a way to get a bigger bucket whit out going to big .Saw this on and had to make one of them spill gard I love to fabric my stuff I hate paying for shipping and waiting .This is what I made today in about 5hr . I try it out it works great to and looks like a beast lol .

I made a set of forks they work good but the hold down are not that great I used a treated 5/8 rod and welded a washer in the botthem but it hard to get them real good . i need to find a way to get a flat bearing in there some how.The one in the pic are something like I have but whit a washer...

Am looking to by a box scraper I see every one using a 5 foot wide on the b2650. Is a 6 foot to big for a B2650 or not .If you get a 6 ft that is the same wait as a 5 foot is the 6 ft still too much for a b2650 . Also looking at a 5.5 feet Walco .What do you have on your b2650 and how it...

Like to no can you add a 3 hydraulic out but to the 2 that I already have on now. My B2650 whit cab has a snow blower on the back so I had to get the kit for the hydraulic shute . Now I have a hydraulic top like so id like to add a 3 hydraulic for that.

Good day does Kubota do hydraulic top link for B2650 or you need to go after market.

Hey guy am trying to find the number for this pump .One of the valve was not working so I found out it had water in it and was frozen so I used a heat gun and it working now .Am just trying to find the manuel for it to see if I can undo the lower cylinder to get the water out. Number I got on...

Only 70hr one of my bucket top cylinder pin is very lose is this normal. Try to see if it just the pin or the cylinder hole that has used up. Any one else had this happen am going to call my dealer see what his thinks about this .

Just pick up this nice massy furrow plow today. When I got home started to look at it closer and notice the 3 pth are to big for my b2650 the pin are 1 1/8 big and the plow is very heavy . Now wondering if I can make it fit , can my tractor pull it whithout braking anything. The plow a model 70...

Am looking for turf tire for my b2650.Founf this are they to big CARLISLE 27X8.50-15NHS - (2) TITAN 41X14.00-20NHS and are they a good mach set for my tractor.

Today I remove the loader bucket off my b2650.Coming of was not bad the fitting or connecter where hard to disconnect but when I try to reconect then back together it was just about impossible. Is they a easy way to get them back in whit out any trouble .The next door guy to me to let some...

This came out as I was getting fuel .Guy asked me if I was using colored fuel or just the regular whit fuel at the pump.Now his got me thinking .Is the red color fuel better for my tractoc or is the white .Is the red fuel bette what your info on this.Red is cheaper up my way they say it for off...

Am looking to add some weight in the back of my b2650, just not sure how much will I add. What you info on this am sure some of you did this .300-400 hundred pounds. Let me no thanks

Well go my b2650 tractor Monday very happy whit .Yesterday look at a few things no this there are no back spot light on it . Id like to put some on some led I see the wire are there in the back are the wire going from the front .So all I need is a switch any one have a part number for it .thanks

Got a new tractor b2650 like to instal a radio cd player am looking for the wire diagram for the plug.If any one can help me out that be great