Search results

Yup, I thought I'd have to drop the Quick Disconnect and Hydraulic Lines Good to know, that saved me some investigative time. Not a good story though, I have a similar story involving a vehicle on a charger and something went wrong, wife was making those big homemade Pretzels and I called out...

MTGreen, Looks like you beat me to the punch-line, Yes the CTEK Charger comes with that attachment.

oldnslo, THANKs for the feedback........ Yes, I'm going to try and futz with it Tuesday, today is football day for sure + the temps will be up to 41 on Tuesday, NH is having very little snow this season. Once I get the hood off I'm going to take the CTEK Comfort Connect with Eyelets that can...

Just went through the Operator's Manual and you're right, back in the "Service Miscellaneous" section there's a procedure to remove it HOWEVER, looks like the hood needs to be in the full Upright Position before pulling forward and off the retaining bushing, I'll have a go of it tomorrow, anyone...

Just purchased a used 2021 x730 in August with 46 hours, it took the place of my '93 425, a true workhorse. Anyway, I purchased the X730 after learning my 47" Blower and all the mounting hardware could be used except for the main Driveshaft coming up from the Mid-PTO. I liked the 425, a simple...

Chevy, Thanks for the response, probably will also leave it out too, it mysteriously appeared in the driveway after I ran it over. Thanks again.. One note, I miss the split brakes on my 425 to brake one rear wheel or the other, that came-in handy when blowing.

Owner of a used X730, found this AIR INTAKE, UPPER X7 HOOD, PN: M166252 (attached) in the driveway after blowing and based on the Parts Catalog pretty sketchy where it's installed or how it's held in place, noticed some melting on the plastic piece around what appears to be a mounting hole of...

I'm good to go, the SCREW, FLAT HEAD SOCKET CAP, M4 X 16, SST inserts into a stem welded on the rear wall of the Heat Exchanges (attached PIC) so no tapping necessary. Was able to extract old screw and found a replacement. I ended up purchasing a 3/16 X 1-1/2 Stainless Steel Fender Washer.

YES Dtodd, thanks, planned on SST so wouldn't have dissimilar metals with the SST M4 Machine screw but a better characterization, a "Fender Washer". I agree Carl_NH, I'll be looking for a SST Fender Washer for sure. I'll know better the exact diameter after I gingerly remove it today, slow and...

Yup several times + look at their Illustrated Parts Listing, etc., etc., et. In my working years I was involved with DOD Logistics and Provisioning. Today I received two bits of information, one step at a time, slow and steady Lochinvar PN: 100162912 MSC2181 RETAINER, BAFFLE, INSULATION (OUT...

Sorry, I know, HVAC question on TBN, hey where else can you find knowledgeable people in all sorts of professional trades. So, doing my 2-year maintenance on my '14 KBN-81 Boiler and all set to replace the Divider Plate Insulating Baffle in the rear of the Heat Exchanger, can't seem to identify...

Just returned the Pipe Dope and purchased Loctite 545 Thread Sealant for Hydraulic Fluid, mentioned in this YouTube on NPT Connections Here's the NPT Fitting Guide used in the video.

Oldnslo, THANKS ! Just picked up some Pipe Dope @ HDepot. Want to get these new elbows finished so I know I'm set this coming winter.

FIRST, THANKS orangetree, all your suggestions worked perfectly, the talc powder gave a different smell to the garage but no leaks. OK, next Hydraulic Connection question PLEASE. Attached find (3) Pics, the first shows the two Quick Disconnect lines originating from the Front Quick Hitch...

Thanks for Technical response and word of Caution, just what I needed, the facts. Yes, I put everything together, used the new rubber o rings and added the "90-degree elbows". I held off until I received some assurance that I didn't do anything drastically wrong that would cause a failure. I...

Recently purchased a used X730 and while doing research I noticed I can use my 47" Blower from my old 425. One thing I noticed right off the bat, the Hydraulic quick connects are on the opposite side so I went through the Parts list, purchased some gaskets and (2) 90-degree couplings since the...

Recently went through the same thing, the JD dealership did a pressure test, trace of coolant leaking into one of the cylinders so, head gasket. While they were in there, I had them replace the original vinyl cam with a metal one, replaced the water pump and thermostat and all was well until 2...

That was it! Just a simple $48 part but did take some searching to find it, JD no longer had it in stock, discontinued production.

Hey Roy, Yes, a beautiful morning walking thru our 14 areas that adjoins 35 acres of forever wild. Our Bull Terrier and I encounter our normal Deer Friends, a Doe, Buck and a small fawn that live here. Last week we saw one of the two Bears that feeds on Buckthorns and lastly, many young Bronze...

Looked at the electrical diagram, thanks, looks like the fuel solenoid is hanging out there pretty much by itself however, if the wiring harness is barely getting current into the solenoid perhaps it was making the plunger so some funky things that cause surging, I'm hoping.

I haven't touched this area since getting it back after the JD Deler installed a new metallic cam and head gasket + numerous other things = $$$$$ but you're right, force did play a role in the damage, it's not a normal connector, it's molded plastic and can't reseat the wire so I'll be ordering...

Yup, AM118880 Wiring Harness connecting to Solenoid. In my non-mechanical aptitude way, I can surely (and don't call me Shirley) identify that needs to be replaced. So, would that cause surging?

HUH ? Just noticed this sheered Black ground wire, haven't snooped (since I know nothing) around the Carb since getting it back from the Dealer, perhaps the jolt in bottoming out in the ditch was the final straw for this wire. If I'm not mistaken, I believe this goes to the solenoid but off to...

Back to the 425 surging issue today......... Just went through checking the fuel line to the Gas Tank, no cracks. Pulled the fuel pump, small connecting hose solid no cracks + cleaned the electrical connections to the fuel pump. I don't have a pressure gauge to check the Fuel Pump Pressure...

Thanks for the feedback ! I've been looking at the Sales Tax issue, most states require payment for items sold in that state. If I "take possession" in NH there's no sales tax required, and a a Tax Form issued by NH is sent back to that state. The legalese, "Take Possession" so that means I...

How did you go about getting a quote for that, was it "uship" by chance. Thanks.......

After chasing engine issues over the past 4 months and spending > $3K, I'm throwing in the towel and searching for a reliable replacement. Since my purchase in 2000, the '93 425 with its 60-inch mower deck and Front Mount 47" Blower has remained reliable companion over the years and has met the...

Probably not the best post, it was conjecture that I "thought" it might have been hit or wires kinked. I agree with you, not way that occured, I wasn';t familiar with the structural set-up. It appears my symptoms are not the same, I let the tractor cool before sending this response, now I am...

Richard, go to the John Deere Parts Catalog under the 425 and look up PN: "AM105574", they have them in the GreenPartStore. The PIC they show is the mounted side you can see. Pull off your Left engine cover, the ignitor is mounted on the frame below the engine. I'm going to respond to...

Thanks beenthere, Everything was going great until this morning, I bottomed out in a shallow ditch compressing the mower deck upward and after getting the 425 out the symptoms started again....DANG ! I'm going to have to look at how that module could have gotten hit, the wire connections...

Wanted to share this story for those who own a 425 workhorse. I followed the guidance of the blog and changed out the IGNIITOR and all is grand again. I do have a question for those mechanically inclined, what does an "IGNITOR" actually do, THANKS. I’ve owned this '93 425 Garden Tractor since...

Looking on fd620d . com @ FD620 FD620D Carburetor Rebuild Kit for John Deere 345/425 / 445 Rebuild MIA11386 MIA12362 AM118872 Carburetors, Hmmmmm, I'm wondering how to find out what carburetor is in that '93..... I have the serial number: M000425A013701, guess I'll be off to research that...

That's a great comment, I was going to go out and order a Rebuild Kit, if it doesn't have a float I'll have to find a kit with one or order that part separately THANKS !

That's good to know, I will forward that info to my Mechanic, I was going to go our and try to order a rebuild kit, I'll satke a look at JD's Kit and if they don't include one I'll identify teh part number to order, good input.........

When I start it up a good amount of the same Black smoke comes out, I can see the split second plumes of black smoke, 'm leaning towards a Carb Rebuild, don't mind spending the money just to cross that off the list....... Anything but the JD Dealership $$$$ just to pick it up $150. and $350 for...

Yes, good input, I've forwarded my post to a friend that is mechnically inclined and does maintenance on this maching.

Thanks I'll take a look in the next two days, I did a circuit trace three years ago on my 790 to track down a faulty fuel shut off, know the drill...........

Thanks for the response, the smoke is black for a split second when it is taxed, yup, I'm at 924 hours........ Hmmmm, cost to replace cam, here in SW-NH not many options except for JD dealership = $$$$$. I have a 47" front mount snowblower too, really like the machine.

Good Morning, I own a circa '93 425 LAWN & GARDEN TRACTOR SN: M000425A013701 and have kept up with the maintenance, Mobil 1 oil, new spark plugs, etc. I'm starting to have some engine operational issues, perhaps someone can give me some guidance. The engine is a Kawasaki FD620D and several...

Own a 93 JD425 SN: M000425A013701, runs great. Several months ago, I purchased a 05 JD47 Blower with all the correct mounting hardware. Over the years I've used the Upper Steering Column Hydraulic Lever to raise/lower the mower deck so I added a hydraulic shut-off valve and added (4) connect...

Good Morning, Picked up a used 47-In 2-Stage Snow blower coming off a JD425 with all the mounting hardware for my JD425, to date I've only used it for lawn cutting. To lift the lawn deck I simply lift up on one of the two Hydraulic Control Levers that actuates the lift linkage. The 47 Snow...

Good Morning from New Hampshire.... my '93 425 (still going strong) SN: M000425A013701 with ENGINE MODEL: FD620D - AS02 is in need of a major tune-up, looking for the correct Repair Kit. THANKS.....

I'm looking at the 790 in the JD Parts Catalog, in specific the Instrument Panel (790001 -). Since I can't find a picture I believe it's PN: LVU801663 "GAUGE" that contains the Hour Meter. I see the assembly is a plug & play, just wanted to be sure that's all their is to it and that nothing...

Fun times in New Hampshire this morning......The lower bolt to the Thermostat Housing sheered while I was cutting the lawn and coolant started leaking......After removing the Housing I was able to remove what was left of the bolt (thank Goodness). I ordered a new T-STAT, Gasket and the two...

I own a '93 JD425 with Engine: FD620D K-Series. Starting to have issues with overheating with the temps in the low 80s here in NH. The engine is clean, checked air filter, radiator blown-out, radiator full with proper coolant, screen cleaned...? The engine is really getting hot (but the temp...

Need some technical guidance with my JD425 regarding the Mower Deck Linkage. I've attached (1) page from the TM and (2) Pages from the JD Parts Catalog. Situation: One side of the mower deck was dragging and after inspection I found one of the ribbed ends of the Splined Mid-Lift Shaft had...

Time to Remove/Replace my Secondary Fuel Filter, JD PN: MIU800645 (Attached PIC), 3TNE Yanmar Engine. Looks like the last R/R performed at the JD Dealer torqued-it-down-real-good !!!!. I've already tried my Belt Style Oil Filter Wrench and I can see it's going to crush the canister...

Good Morning, I am Mechanically Challenged and here I am again seeking some words of wisdom. I own a '93 JD 425 K Series, V-Twin, Serial # M000425A013701 that has been a workhorse all these years, I make sure I keep up with the Scheduled Maintenance, never a problem and always at-the-ready...

I own an '05 JD 790 Compact Tractor that resides in an attached garage. It smokes when you start-it-up (even when using the glow plug function) and that smell can creep into the house during the winter months + lingers in there for quite a while even with the stall door open. The 790 has a short...

Well, Learned a hard lesson yesterday :smiley_aafz:............I was on another site, configured much like Tractor-By-Net, posted a simple PDF File and WHAM-MOE :eek:..........My Lenovo Hardware Monitoring Software give me an alert "Repairing Hard Drive"....O'Boy....and then, can't logon...

Good Morning, A cool crisp morning in SW New Hampshire BUT PLEASE SEND RAIN........ I'm trying to test out the voltage readings coming to the Stop Fuel Solenoid. I'VE attached the appropriate Wiring Diagram for my '05 JD 790 Production/Serial Number. Wondering if someone could walk me thru...

Last couple of weeks noticed this occurring more and more. At one point I reversed the starting key (25 seconds) to get the glow plug going, still didn't start. I check the Fuel Filter, opened the drain and full of fuel. Purchased diesel within the past month, Shell Brand. Changed the Seat...

Yesterday I had my 1993 JD 425, 2-wheel drive Garden Tractor that I purchased used in '2 out and notice what I thought was smoke coming from the engine area so I shut'er down. First thing I thought of, an electrical short and there goes the wire harness but thankfully just a leak in Lower...

Clearing heavy brush, discovered old stone well, 14'+ depth. :eek: For comfort and safety, need to cover this Attractive Nuisance (by legal terms). A 4 round diameter grate would fit nicely overlapping the stone perimeter. I'd like to be able to see down into the well so a solid concrete or...

:confused: Was using my 790 w/FEL to set stone, you know, the typical New England stacked stone fences you see visitng New Hampshire, loading bucket with single stone at a time to easily set into place, up to 120 lbs. Shut the tractor down, parking brake on, took a short break, came out and...

I thought I'd turn to this site for some sensible feedback. I build an ICF House in 2012-2013, I acted as the General Contractor and thought I had everything covered but recently started noticing some flex in my Aquatic Shower Enclosure not to mention the old water spot in the ceiling last...

Hello, Just returning to TractorByNew after my wife and I physically built an Insulating Concrete Form (ICF) home in SW New Hampshire during 2013. We used 247 cubic yards of concrete and 5.5 tons of rebar. I would be more than happy to share our experiences if you're planning on building a...