kubota bx25

I find an auction rotary tiller on ebay. accubic on eBay The accubic RTA48 description say it is comparable with bush hog RTC50G and Phoenix T4 48". Accubic RTA48 Bush Hog RTC50G Phoenix T-4 48" I compare 3 kind of tillers' pictures and RTA48 look nice. But I have never heard of brand...

We had a pretty good snowfall in SE Mass beginning of January (Thurs into Friday if I recall) My regular days off. My snowblower needed a carburetor, but I have my BX25 going on 4 years now still with under 200 hrs!!!!!. Been very reliable in winter. Covered up with battery warmer. Has always...

Ok guys, fairly new to this forum, been reading a while but signed up today. Be nice to an old guy with more arthritis than he needs!! BX25 would not start, single digits are fairly rare in Northern Virginia.....and I'm an old generator guy! The fuel lines gelled pretty good, and I get the info...

Anyone try a left side brake pedal conversion yet? I am going to try it when winter is done. It would be fairly easy if not for BH sub-frame being in the way. It looks like just the pedal shaft could be cut and new pedal added on same shaft as original. I will leave the original pedal and just...

I'm interested in replacing my BX25 seat with a seat that has an adjustable back. Has anyone found one that they are happy with? I would consider OEM or third party. Thanks for looking. Dean

Hi everybody. New to this stuff. From Larsen, Wi. My BX started stalling out at 180 hours. Replaced both fuel filters which corrected the problem. The lower filter did have a lot of black flakes in it. Now at 210 hours I am having the same problem. I'm thinking that maybe there is a problem...

I have a BX25 with industrial tires. My driveway is a sheet of ice. I want to get tire chains. I have a few questions: should I get both front and rear or just rear, 2 link or 4, regular or v-bar, where is a good place to buy them? thank you

Here's my version of QA forks. They work great. So far the only complaint of the tractor is its loader height. It will barely get over my 1ton box with the bucket. With the QA and forks on it weighs 6lbs. more than bucket assy. Forks are flippable too. Also made a mount for an atv plow just in...

I built this cab 2 years ago. It has held up great to the weather. I do only use it in the winter though. It is made out of clear pine and 1/4" luann plywood for the roof. All joints are pocket screwed and filled with plugs then sanded down. I routered out for the windows, then used 1/8"...

I just boight 27 acres and im thinking of a bigger tractor I have a bx 25 and was thinking of a b or L series with a backhoe does anyone have a b or L searies with a backhoe. I know the b is not much bigger than the bx. I plan on digging and a little brushhoging and thats about it thanks

Hi, Long time reader, 1st time poster. I have a BX25 that I have been doing a few mods over the last year or so. I've made my own Bobcat style QA,fork assy.,and converted an old Bolens 48" blower on my own semi-qa mount. Also have built my own cab that has worked great these last 2 winters. I...

I have a kubota bx25 she stalled on me yesterday and could not get it going again, I have fuel stabalizer in it and stuff. my brother in law came I tried to put a hairdryer on the fuel filter but it still was too cold, I put it in neutral and my father in law toed me up to my house. warmed up...

Hello All, This is my first post. I joined 6 months ago and have been lurking a long time before that. Just trying to absorb all the knowledge here. I finally got the wife on board for a tractor purchase and I'm ready to start checking out the dealerships. First about my needs: I want a...

I have a kubota bx25 she stalled on me yesterday and could not get it going again, I have fuel stabalizer in it and stuff. my brother in law came I tried to put a hairdryer on the fuel filter but it still was too cold, I put it in neutral and my father in law toed me up to my house. warmed up...

I found some of this on orangetractor forum. Some is edits from TBN members. 1520 - Tractor 628 - BH Backhoe 22 - 8 inch BH bucket 375 - FEL Loader 132 - FEL bucket _________________ 2677 lbs TOTAL weight This info was surprisingly difficult to find in all the specs sites I looked at...

I have a BX25 its 3 or 4 years old has around 140 hours on it. about 2 weeks ago I started it up and it turned over and ran fine for about 5 minutes then it started sputtering and stalled. I could continue to start it but it would stall within a few seconds, it was almost out of fuel so I...

Hello all, It's been a few years since I've browsed these forums, but when I did, I read some great advice that led to my purchase of a BX25. For the last three years, it has been a godsend around my 1-acre house. I couldn't live without the FEL, the 54" belly mower has worked well, and the...

Looking for a rear blade for my BX25. I see King Kutter makes a 50 XB model but would like to find a 6' blade. Would the 6' King Kutter work? I saw a Bush Hog 6' (3506) blade that I really liked. Thoughts, Suggestions and help would be greatly appreciated........Oh using it mostly for snow...

had an idea and created them today. held in by 2 bolts and 2 pins they are easily removed. Also all the forks are pinned in so that if I need a longer fork , I just need to pull them out and put longer ones in . Or take out the end 2 and move a pallet.

Well I think I finished getting ready for winter (tractor wise). Finally decided it was time to remove the BH for the first time and install the 3pt hitch. It was a good day today with my son assisting. Went pretty smoothly using the BXpanded BH dolly. Rolled the BH easily into the corner of...

Just wondering what I need to do to put away my bx, this is the first winter that I will have had it. It will be stored in an unseated garage. So what do I need to do to "winterize" it ? Thanks

Hey all, Been reading this website for years. I bought a used bx25 and have been going over everything. One concern is the brake pedal which seems to have too much free travel. The manual says 1 to 1.4 inches of free travel. I have about 5 inches. Almost no braking at all. To adjust the...

Hello everybody, Newbie here. I have been reading this site for several years. Finally have a 2012 bx25. Used, from a private seller. Changed all fluids at 51 hours. Concerned with the brake pedal. Tractor will not stop unless rear speed control pedal is pressed. Operators manual says 1...

Ok I know there not equals but this is what ive gotten down to wanting to buy. The Kubota bx 25 with loader and backhoe is 18,500 with 0 interest for 60 mos. The Mahindra max22 with loader and backhoe 0 interest for 60 mos is 19,600. With the kubota i can get 500 off another attachment which...

Hi. Is there a way to find a catalogue with all the parts and numbers of a Kubota bx25 so I can choose a better place to buy than in my area, Puerto Rico? It seems to me that the mark up in my area is too high, like $450.00 for a 6" backhoe bucket. Juan

Anybody know what model# Sweeper goes on the quick hitch on the BX25? The website is very unhelpful at helping to determine these things. Thanks!

OK I have had my BX25 for a little over a year and have not installed the 3 point hitch kit that I bought to go with it. I still have not purchased that tiller for the thing. My question is....do you have to remove any of the hitch kit to put the backhoe back on? I am a little confused on that...

Can anyone tell me if they know of a flail mower that is compatible with a BX25?

Hello Has anyone seen the new BX25 factory thumb for sale online from any of the online Kubota dealers? ORDER CODE BX6316 Mechanical Thumb (BT602 Only) FACTORY NUMBER K292B50 suggested list $375.00 Has anyone fabricated their own welded on bracket that is missing on older BX25's to fit...

Has anybody had experience with the Rock Bucket from Jari? Looks good. I was thinking that on the front and a landscape rake on the back would be a great landscaping setup for my BX25. Any other ideas?

Can someone tell me what the color codes are for the FEL hoses on a BX25? Which 2 are for the curl cylinder and which 2 are for the lift? Thanks.

Just found this site and was hoping someone could help me find a grass bagger adapter for a 60" mower deck for my BX25 so that I could attach it to a leaf vac. Thanks

Looking to put wheel spacers on my BX25. I thought Bro-Tek sold spacers, but I don't see any on their website. Anybody have any experience with these, from "The Tracks Company"? Kubota John Deere Compact Tractor Utility Vehicle Wheel Spacers Their photos and info look good, but I don't...

Has anyone had a problem with the cutting height knob. Mine is difficult (to say the least) to put into the lock position, it moves easily from the 0 to 4 but going from the 4 to the locked up is darn near impossible, I have to raise up the deck to max then rock the lever up and down very...

I've always said don't ever buy anything I've owned. I use it to the extent it would make the engineers who designed it cringe. I've got a G1800 now and love the machine. Might even cry when I sell it. I use it to mow and blow snow. I have a 450' driveway in NH with two large parking areas and...

I'm thinking about selling my Kubota BX25. It has about 190 hours. Excellent condition. Extras include OEM 3 pt. hitch adapter,a thumb, fork lift attachment and skid plate. It still looks brand new and works perfect. I bought it in 2010. Sheltered all it's life. What do you think I should...

I may have asked this question before but now that my plugger is but a week away I'm getting nervous. It will attach to my three point hitch on my BX 25 (not the "D") I will keep the FEL on for counter ballast. The issue is the plugger is 36" wide but weighs 650 lbs. The three point hitch is...

As a condition of upgrading to the 25D my wife said she wanted a bagger, if that痴 all it takes I知 in. The dealer cut me a good deal if I壇 assemble it myself so too easy,,,so I thought. Comes in three packages one with the bagger it痴 self (large box), an adapter to my mower deck (medium box)...

Started grading the dirt around my new shop this past weekend! I was pleasantly surprised at how quickly the BX did the job. I think it would have went faster with a box blade rather than the rear blade I had on. Will probably end up picking one up, is 5ft too big for a BX25? Here are a few...

I've got a problem with my BX that has me perplexed. Last fall while mowing the tractor started to occasionally sputter and lose power, mostly when pointed uphill. A quick search here pointed to the culprit possibly being the fuel filters. Tractor has roughly 200 hrs, so I figured it was cheap...

Sorry for the mundane question that you have all already answered a gazillion times. And it may already be too late to ask since I have about 30 hours on the BX now. I have been running it between 2000 and 2600 rpms, occasionally adjusting the rpms so as not to run at the same rpm all the...

I am new to owning a Kubota tractor and was wondering if a Model RCK54-22BX series mower deck would fit on my bx 25. Any help with rhis woulde be great. Found one for sale rather cheap. Thanks for looking

About a year ago I bought a used L3400 HST 4wd w/ loader. My jd L130 riding mower is on its last leg. Here are my options> 1. Buy a Toro zero turn - keep L3400 , 5-foot bush hog, 58 inch RTR tiller 2. Buy a finish mower and push mower ( to mow around house ) - keep L 3400 3. Trade...

Looking to buy a posthole digger w/9" auger for my BX 25. Recommendations?

Anyone have one of these for their BX? BOG For some odd reason I seem to have a fascination with grapples, they just look extremely useful. :D No tractor, but would love a BX25, and also to have some sort of "semi-affordable" grapple function. My question is first of all, how do you like...

I'm getting ready to change the oil in my BX25 and interested in what everyone is using in their 25's. I've been using Kubota brand 10-30 but would like to find a synthetic. I've used the search engine but couldn't find any conversations on oil types. Any thoughts or does anyone know where I can...

Ok guys, I need some help please. I previously owned a BX2200. Sold it a couple years ago. Missed it terribly. Wife let me buy a new BX25 yesterday. Put about 4 hours on it today mowing and digging up ugly bushes with the backhoe. Worked great! Wife road it around the drive way and said...

Sold my JD x320, which was a really good mower and upgrading to the Kubota BX25. Hopefully the 1' more deck will help in mowing and plan on planting 50 or more trees, the back hoe option should work out. Also need a snow plow option, which the 2wd JD just didnt work that well. Hopefully this...

So I'm looking at buying a Wallenstein WX310 3ph log splitter for my Kubota BX25. I want to run the splitter off of the power beyond hoses that are used for the backhoe. I don't know a lot about hydraulics but my concern is the splitters specs recommend a minimum of 10 GPM of flow to the...

Hello everyone, just found the TBN forum site, it is great. I have owned my bx25 since last spring, lots of projects completed, many more upcoming! No problems with the bx at all! It is an awesome machine! I plan on a toothbar, thumb, and some belly protection for it. I am debating between a...

Here is a video I just made of a Rossi sickle mower on my BX25, mowing around ponds and cutting cedar saplings on a steep hill. It was my first use of this thing so I'm slow and still getting used to it. It does an excellent job around the ponds, better than anything else I've tried, by far. I...

I am looking to add rear remotes on my BX25 for the main purpose of having power angle on my rear blade. I will probably find other reasons down the road but thats the main one right now. I know that with BX25 i cannot add the Kubota kit becuase i have the Bhoe. I would like to use the slot...

:)Looking at bx25d @ 15k or b21 at 18k what is best, thanks

Rapid fuelling potato cannon mounted on Kubota tractor

I'm looking for a 3PH Kit for my BX25. Dealer 1 wants ~$360. Dearler 2 and 3 want $218 + $40 shipping! and said it'll take 1 or 2 weeks to get it. Is there an after market one I can get cheaper? if so where? I see one on ebay but have no idea if it fits 3 Point Hitch Kit for Kubota Iseki and...

does anyone know if they make a bucket for the bx25 for digging in rocky soil? i am in the process of moving any was digging a ditch for my water line and the rocks are to much for the little digger i got the ditch about a foot and a half deep witch if fine for the temporary water line i need...

This machine has only 16 hours, close to my house and I need it. What would be a fair price to offer on this machine? kubota bx25 loader Thanks for any advice. Steve

Hi all, I've been lurking for a while but never got around to registering. There's been a few times lately where I've wanted to respond to a post but remembered that I didn't have a membership, so I figured I should fix that. I've been hanging out on another forum but this one has been just as...

Hi, I am new to the forum. I bought a new BX25 and would like to install a small class 1 wood splitter. The one I am looking at getting is the 13 ton from Northern Tools. My question is concerning the hydraulic system and any issues. I plan to have a shop build some hyd lines that I can plug...

OK, new to tractors here, and have a very basic understanding of hydraulics, and none when it comes to the way it's used in the BX25. I'm thinking of buying an Enorossi BFT135 5'ft sickle mower from my dealer. The BFT135 that he has in stock (rare find!) does not have the hydraulic bar lift but...

The electrical interlocks will not allow me to get off the seat to operate the chipper with the PTO engaged. Is there some little quirk I am missing or do I need to install a bypass switch around the seat switch? Ron

I do quite a bit of dirt road maintenance (1.1 mile long) with my BX and I've had a couple of close calls with vehicles even though the posted speed is 20 and I have all my lights on, day or night. I purchased a service light but it was a disappointment. The emergency flashers on the BX are...

What are the differences, if any, between the FEL on a BX25D and the FEL on a BX25 or BX24? Not including the QA. Any design, structural or metal size differences? Cylinder size? TIA

I just went through the process of adding a proper spin on filter to my BX. As you may or may not be aware, the factory filters are in line, plastic jobbies that are more fitting on a snowmobile than a tractor. Recently I've been having fueling issues where the tractor would stall out /not...

Tipped my BX25 FEL & BH on its side - what precautions to take before starting engine Hi People - tipped my BX25 on it' side this afternoon. Upright again OK but engine doesn't ant to turn. Starter kicks in but there is obviously an issue. Engine oil in cylinders? Any ideas/ previous experience...

I pulled out the eleven plastic "Christmas tree" ribbed shank fasteners that hold down the rubber floor mat and pulled up the mat. After four years, a layer of mud and water was under there but it washed up OK, no rust spots that I can see. The ribbed shank fasteners are tough to get out, and...

i went with the small ones (1.25") due to the clearances on my 54" mower. most of my annual hours are accumulated mowing and i wanted spacers that i could install and forget. i installed them this afternoon. no idea (yet) if they make the machine noticeably more stable, but they made...

Greetings: I'm new as a poster but a longtime reader who, like many others, has benefitted tremendously from the wealth of information available on this forum. So, thanks for what you've already taught me, and for what I hope you'll teach me in response to this question. I've searched the...

grapple for my bx25, any suggestions or ideas ,1 that is easy to install this is all new me

Yep, had my BX25 now for a little over 6 months and love it. Sank it twice in the mud (that was fun) and done TONS with it. This Saturday I ran over a small section of my property that had some down tree limbs and wouldn't you know it - one found it right up in the nice guide (they call it a...

I have the Kubota ballast box for my BX25 and it won't lower enough to sit on the ground for removal. I have to put 4 X 4's or cement blocks under it to set it down. I also spent a short time trying to get my Brinly cat 0 3 point one bottom plow set up and couldn't get it to go deep enough. It...

I need opinions on rops lighting for my BX25. The brightest is what I'm going for.

I am debating whether to purchase a Kubota front mounted snow blower or a front mounted blade for my BX25. Advantages or disadvantages of either?

I recently replaced my Bx2200 with a new BX 25 and added the front snow blower. Now my shed is overflowing. I have the blower in the garage in front of my car right now but the loader won't fit there. If I store the back hoe and loader in the shed the tractor will be hanging out by several...

DO you have a BX25 and are you running a flail? I sure would like your input if so, what flavor etc your runnin' and would you buy it again kinda thing... I have a job where I need to knock down and mulch several acres of brush, mostly 1" thick or so and under stuff. I am close to Gearmore...

Been reading this forum since a little before I bought my bx25 a year ago, and I appreciate all the tips I`ve picked up. So far at 140 hours I`ve only had two issues, both were a result of nuts that came loose and fell off. The first was the center nut under the seat which I've seen a number...

I've had my used BX25 (500hrs.) for a few weeks now, but it's having itermittent engine issues. After running it for a few minutes, sometimes the RPM drops to <1000rpm and stays there. Sometimes it dies, it will always restart but still won't exceed 1000rpms. Throttle linkage is working fine...

Hi, I have used this site and a couple of others to research the BX25, CS2410, and 1026R. My 2012 BX25 will be delivered next week. I live in Newfoundland, Canada and will primarily use the machine for mowing and snow removal. I do have some ground work to do and a few trees/shrubs need to be...

Couldn"t spend a lot of money on a blower to clean up around the yard. so I made this. works pretty well

So I just bought a used BX25 and love it so far. However, I am having problems getting the mid-mount-mower to lock in the upmost position... no matter what I do it raises and lowers when I raise and lower the 3 point hitch... I have tried the 'cutting height adjustment' on both extremes. I...

Do YOU have a flail mower on your BX25? If so what model did you buy and would you buy the same size flail again? Are you under powered? What size is your flail as well...please. ?

Can anyone tell me where a BX25 is manufactured and assembled? I was told in the USA.

I am trying to find a belly mower that fits a bx25 without modding. Any size deck will work for the right price. $1,500 for a new one is just hard to take. Paying $2,000-$2,500 for a bagger is gonna hurt too. Any ideas for a bagger or cart shredder system. I must be searching the wrong keywords...

Which brands and sizes would work the best? Any deals out there?

Which brands and sizes would work the best? All opinions welcome. Any deals out there?

I have a BX25 with 30 hours on it. When it's running and on an incline to the left it makes a knocking noise. Seems to be worst at idle and gets less as the rpm increases. The noise seems to be comming from the left side of the engine near the front. Does anyone else have this noise or know...

Does anyone out there have the HST hydraulic schematic for the BX25/xx60 line? I believe that the WSM contains this. I posed this question in another post but it was buried and I doubt many saw it. Thanks.

Greetings, Ladies and Gents! My first post here, though I've been lurking for the past 12-15 months. I致e learned a lot from reading the various forums on this site. Thanks!:thumbsup: Just bought a new BX25 from Southwest AG in Colorado! I'd looked at John Deere, Massey Ferguson, and...

Doing some planning in the garage, what is the total length of a BX25 with the front bucket and the Backhoe attached Thanks

I am going to build an addition on the side of my workshop to house my BX25. It will be 16 by 14 feet. I would like to put a wood floor in it but am wondering if the floor would support the weight. I was going to use 2x8 floor joists 12" on centre and board it over with 2x6. I would rather do...

Started to tackle my winter firewood today. Sure is nice to have some helpers.

I know little about hydraulics. The BX25 is a lil pit bull but the FEL lift acts more like a poodle. I know I can bump up the pressure but would it not be wiser to simply make larger cylinders that fit in that holes made to OE dimensions? The OD of the BX25 FEL Lift cylinders, (the bore?) is...

I am considering adding spacers to the wheelbase. When I do it the tendancy for the rear to throw yuck on me looks great. Anyone have any good ideas for some add on maybe rubber fender extensions? I remember seeing a thread where a guy built some sweet front wheel fenders...I need to find...

i was wondering if it is possible to change the hoses on a bx25 backhoe to get the excavator pattern?

Every time I get on that little tractor I am just blown away with what it can do. I just got my new thumb welded on I don't know How i ever got along without it.

I know this is an apples to oranges comparison. I'm 90% sure I'm getting the bx25; I know it'll fit my needs, but I can get a ck20 for about $2,225 less and am wondering if I should get it instead. (the bx25 is right at 15k with TLB, 3ph, and r4's) Both have a loader and backhoe Bx is almost...

It seems like the more I read about Quick Hitches the more confusing things get. Chaotic at best is the info I have run into. I need to save cash and after looking at the QH's for sale and assuming that many of the inexpensive models look to be the same as the HF I went w/ it. I pull it out...

I want to buy the perfect nice supple connectors to connect to the auxilary wiring at the rear of the BX25. Does anyone know how to call out those parts exactly? A little harness would be great any such animal?

Ones the bx 25 have the two rear breaks, or one break for both rear wheels?? Sent from my iPhone using TractorByNet

I have a hard time greasing the swing frame pins and can only do it while actually swinging side to side. I have pulled the zerks and they work fine and have cleaned out the cavities. I'm now thinking that the fits might be so tight that grease has a hard time penetrating. I have no problems...

The BX25 Full Cage is winding down, time to look ahead. I am wanting a Disc Harrow so I went shoppin' and found a barely used Leinbach B245-20-18 for $400.00 . It still has paint on the discs, the worst wear is from rain... It is too big for a BX25, butsomehowever, I look at it and see it is a...

I might want a set of 4 or maybe just 2, front and back is what I would like to stumble upon for spares and for a song! If I found a full set of Turfs or Ags I might want them, if I found 1 Each of the R4's (I have them OE) I might want one front and one back or maybe ??? Shopping for a bragain...

Need to know how to repalce fan on end of drive shift on a BX25. It keeps the tramsmision cool.

Has anyone tried Everything Attachment's 3rd Function kit on a BX25? I'm getting ready to add a grapple from Tach-N-Go, Loader Buddy, small loader Quick attach and attachments, and I need to decide on how I will deal with the hydraulics. I've read through Artisan's grapple-o-matic thread, but...

Well, fellow sub-compact owners, after almost rolling down the hill today with my 1026r and backhoe, I have decided that it would be nice to leave it in gear and creep up the hill with a hand control instead of my current method of reaching around and pushing the hydro lever with my spare 12"...

Brand new BX25 and after mowing or using the hydraulics for the three point for 20-30 minutes when I raise the hydraulics lets out a high pinch squeal whether I raise it fast or slow. Dealer picked up tractor last week and then brought it back Monday and said it was good to go until last night...

What I do not know about electricity will fill volumns and volumns. Frankly, I am absolutely horrible at it. I just don't savvy...sad it is. Are there any 12Volt guys here w/ a BX25 interested in getting more electrical power out of their BX25 (or) that can advise me? I have been thinking...

I recently did the 300-hour service on my Kubota BX25. I agonized over how to change the fuel filters without losing a boatload of diesel fuel. Some guys talked about plugging the vent holes on the cap, while others installed a shut off valve. I then got to thinking about the old toilet bowl...

Anyone ever build or buy a cleanout / ditching bucket for a BX? Ive been considering building one (when I;ll get the chance.. not sure) and am curious about dimensions and experiences in use. I was thinking about 24-32" wide? I have several hundred feet of ditch to reshape and cleanout (no...

What is the best compact tractor to get, and price? With loader, backhoe, and posthole digger. Thanks for any input.

See the picture of my rock pile I created with my BX25. The white rock on top is quartz that I wrangled out of the bush. :)

After owning the the bx25 for 3 years I`m now upgrading to the L 3800 I would like to thank everyone here that helps people out with the big decision of buying a tractor with all their timely advice and discussions it really helped my decision on what type and model of tractor to buy. My...

This is my first post out of Buying-Pricing and in owning, operating. My BX25 was delivered at noon today. Some of you may have seen my posts in various forums about the pricing and finding product frustration I've had. Took a year, but I'm done with that. Made my choice and paid my dollar...

I really want some front AND rear trailer hitch receivers for my BX25. Bolt on units. May I ask who bought what and what would you change if you could? Pictures are most appreciated, Thank YOU!

Greetings all... Have read many threads on "alternative" air, oil, hyd, products to help save $ and perform adequately on the "toys" many of us have. I can understand using factory stuff under warranty, but out of warranty perhaps aftermarket would be useful and save money while being able to do...

Just got a new BX25 and I am looking at the engine type. Engine type is D902-E3-BX-2. Does this engine have Exhaust Gas Recirculation (EGR), and if so is it internal or external? HELP! Dave

I've just put together a new 2-ton capacity dump cart, since the old 0.1-ton Sears cart I have just isn't cutting it (two scoops of dirt from the loader and it barely rolls). More accurately, I have a 2-ton capacity cart, period, because until I add a hydraulic cylinder, there will be no...

Well, finally started my dual rear remote project for my BX25. This all started after following Artisan's BX25 GrappleOmatic thread and thinking about adding the Thumb grapple to my FEL, but, I also have a hydraulic top link that I used on my old BX1860 with the Kubota factory dual rear remote...

We are moving to woods and I will be taking my Babe (my BX25, silly) on may trips through the forest. Now, I have an absolute angel for a wife, but I prefer not to become an angel for her.:laughing: Accordingly, I have tried to fabricate an anti-widowmaker cage which, hopefully, the pictures...

Has anyone built a cage for their BX25? Doesn't look too awfully hard. Perhaps build off the Canopy Frame (#1133) and or customize...Sure would be a nice piece of mind... Perhaps make it so it is easy to remove as well...

hi all. long-time reader, first-time poster. i finally bought my BX25 last fall and the 50hr. service is approaching. i found several informative links about doing this myself, but i was surprised not to find information anywhere about torque specs for relevant plugs. anyone have torque...

My BX25 has a bleeder bolt screwed inside a larger hollow bolt that connects the fuel line to the fuel injector. Does anyone know its purpose?

Just got a BX25. Do I need to use the glowplugs to start when the engine is hot?

I bought a Wallenstein thumb for my BX25. The first one was made slightly too small to fit the dipstick. The dealer sent me another one (and said don't bother to send the 1st one back). Now I have an extra one. I used a double nutted stud to spread the cheeks and now the 1st one will fit...

I have a Kubota BX25 I use to prepare a future homesite a few miles away. I have often wondered what I would do if the tractor should die in this remote location. Assuming the loader was up or that I could somehow raise it, could the tractor be winched upon the trailer without damaging the...

Hello All. New the forum. I have "officially" retired as a grain farmer (if a farmer can ever retire) :) and have bought a small place (less than 10 acres) to retire on. I bought a BX25 mainly for the FEL and to keep my wife happy by moving tons of mulch every year. As well, I will use the FEL...

Hey all! Nube on this site, and I have already learned a ton of stuff! I do have a question though...I want to buy a box blade for my BX and I think so far I like that united looks good. It can go forward or reverse, do they all have that feature? What are some others like that? Thanx in...

What a pain is the ars the oil filter is to remove, I put in Rotella synthethic oil, and the low idle is as smooth as a kitten purring, instantly. What a difference, also checked the front axle, and had to add a quart of udt, no leaks and it was off the stick completly, where did it go...

I have a 2 yr old BX25 with 133 hours. I use it mostly to cut my 3 acre lot with the mid-mower. The problem is it runs very rough to the point of stalling after running the mid mower for a couple of minutes. I discovered a small hole in one of the three fuel tubes that connect to a T-joint...

For My BX25 Folks I am about to be launched into another area of tractoring that I am not familar with, that being the 3 Point Hitch Assembly. (BX2506) I took all parts out of the box and began to familarize myself w/ its contents. It seems pretty straight forward EXCEPT, I am puzzled w/ Part...

I have a bx 25 that just will not crank over. Nothing! Battery is fine, both underseat safety switches are ok I guess since jumping them does not help. I do get fuel pump clicking sound and both the dash lights light up but no crank or even solenoid activation! Is there a switch somewhere...

Does anyone know if Kubota still offers the Jodale Perry built, Kubota BX6730 cab? Does anyone know if it will accommodate the backhoe on a BX25 with or without modding? Does anyone out there in TBN actually have one? Does anyone out there in TBN actually have a Laurin Eclipse cab on a...

I had to remove some junipers that were along side my driveway. It was a tough spot to work on. It was a slopey slope with very little room to maneuver on. The BX25 got it done.

The BX25 now has a new home:thumbsup:. The BX has earned a new place to live......I've said it before, this is one hard working machine, from cutting the pad to speading 100+ tons of limestone the new 30' X 40' Cleary polebarn is complete. If anyone has plans on building a new polebarn I...

Sold my old Yanmar and bought a BX25 the other day. I was looking for a place to mount a small tool box. Nothing elaborate - just a few wrenches and maybe a chocolate bar. Yeah, yeah, I know "you dont need tools for a BX25 because it never breaks". But I did mount a set of bolt-on forks on...

As anyone tried putting bigger tires on a BX25? I love the tractor but I find when I get into any mud it gets stuck real easy.👎 Does anyone know the biggest size of tires that will fit (front and back). A sub compact tractor is great for small places but some monster truck tires on it would be...

Started a new project with my BX25, it needed a home (along with all the other toys uuuhh I mean tools) Putting up a new 30 X 40 pole barn plus adding to my exsisting driveway. Started working on the pad about 3 weeks ago, the grade was within 2 inches with the exception of one corner was...

Hi guys, I'm looking for a Post hole digger for my BX25. Right now I'm deciding between the TSC County line model, which would come out to $540 with a 9" auger, or the ETA (everythign attachments) which would come out to around $640. I'm wondering if the ETA is worth the extra $100. I have a...

There is a lot of talk about the time it takes to drop the loaders on various tractors. Here is a video of me removing the BX25's loader. First time doing a video like this. 75 seconds!!! :dance1: Removing Kubota BX25 Loader - YouTube When I get a chance, I'll get a video of me installing the...

So there it is, a perfectly good, brand new, unused mid pto on my BX25 that I am seeking to put to work, somehow. :D Don't know what for yet, maybe an Auger, maybe a blender, time will tell. The BX25's mid-pto specs are up to 2500 RPM and the shaft, well, I don't know the exact call out for...

I just received my Wallenstein thumb for my bx25. I am struggling to get it to fit. Later: I found the distance between the cheeks is to narrow to fit on the dipstick. The dipstick is about 1/16" wider than the thumb. It is too narrow on the most forward part of the thumb where the...

I have never pulled a plow. Is this too much for a BX25?

Have a BX25 with about 340 hours on it. While I am running it for no apparent reason it stalls out. When I put the key to accessory I could not hear the fuel pump priming so I thought it was the pump. I put a new one on thinking I fixed my problem but is still doing it, runs for a few hours and...

I am purchasing a BX25 this week with a couple extras and wanna know what a good price for the package is. BX25 with a 60" MMM and a 3 point hitch with a Land Pride 48" box scraper. At the current time I have a quote of $19,400.00. What do you all think? Could I get lower?

My BX25 is about 3 years old and I've never had any trouble with it so far. A couple of times I had to adjust the nut that allows the deck height to go into the "TOP" position. I had to adjust it a few days ago after having the deck off to grease it and sharpen the blades. I don't know if...

Will a Woods PHD35 with 42" long auger work on my BX25?

Using my BX25 yesterday and noticed liquid running out of my front bucket. After inspection discovered the liquid was Hyd fluid coming out of the hose that supplies the hyd fluid for the bucket tilt. There was a section wore out on the hose. I noticed the hose has a tight bend making a full 180...

Anybody have a hydraulic Schematic for a BX25 TLB? I want to add a set of rear remotes. I understand there is no factory kit available for the TLB, but a homebrew setup should be relatively simple to make. I should be able to plug the rear remote valve into the PB loop and hook the Tank port...

Does anyone know why Kubota doesn't list AG tires (R1) as an option for the BX25. When I was researching my tractor I knew I wanted turf tires as my main set. However, they lose traction when doing FEL work in wet soil and I'd probably get more off lawn use out of AG's than a compromise tire...

Well I finally bit the bullet and I am know the proud owner of a new BX25, LP box scraper and LP rotary cutter. Man am I psyched! The little guy in the picture is my best buddy (son) and he just wants to know when we can dig some holes! Anyway, like I have read in many other posts, the list of...

Gidday from Aus . 4 anyone interested did first 50 HR service on BX25 Kubota. Changed eng oil and filter using gen Kubota filt and 15w/40 Kub oil . 4ur info eng took 3.2 litres exact which is 100ml more than owner man spec. Decided to change tranny oil ,put new hyd filt on and removed and...

Pictures of my first major BX25 project... pallet forks. If I said it once, I've said it a thousand times... I LOVE that tractor! :laughing:

I am in the process of getting (maybe?) a kabota bx25. So far I have been quoted $ 21,700 for the bx with fel and backhoe, a 54" belly mower and 3 bag catcher. I have a small farm my family and I have just started and I am looking for a small versatile tractor. I just ran across the mahindra...

I must admit, I just LOVE my BX25. That is saying a lot coming from one who doesn't care much about cars, cycles, atvs and such even though I have all these. In fact, I am beginning to worry about myself. :laughing: In October we had a terrible snow storm that brought down trees and branches...

I posted a thread yesterday concerning used vs new pricing on BX24 and 25 units. Another option presented itself today. Located a very clean nice looking B3030, 2006 and 243 hours, pictures make it look very clean also includes 60" woods bush hog, asking 16k. What is a fair price on a tractor...

I've been hot and cold on the tractor search for a couple of years and have recently ramped my efforts up and have made my mind up to purchase a BX24 or 25. My original plan was to go used. So, I've been checking Craigslist every night, tractor house, Kubota dealers etc. My inquiry is twofold...

Man I have a learning curve that is steep mountain! I see the hoses on my BX25 are labeled w/ this; 4STARFLEX 3000 1/4" WP 3000 PSI SAE 100 R17 2Q 2010 W17A (s) and hard to see the larger hose but I do see a 3/8" so I assme it is; 4STARFLEX 3000 3/8" WP 3000 PSI SAE 100 R17 2Q 2010 W17A...

Folks can anyone explain to me what I just found out? My BX25, the FEL valve, the curl, when I push hard to the right, it hits a detent. The bucket goes down at controlled speeds, slow to fast, till I hit the detent then it is one speed. What is going on here and why?

Anyone have an idea why my snowblade moves slow to the right unless I push the lever all the way to the far right where the handle has the detent? All other directions it moves great the way it always has.

I purchased a 2010 BX25 to do my heavy lifting work on a new property, it now has 300 hrs on it. Now that I have a paved driveway and grass on the lawn I can't seem to justify keeping the $23k machine to just push snow and mow the lawn. If I look at this for just the ca$h it's clear so if you...

kubota owner manual specifies kubota UDT or super UDT fluid . is anyone able to tell me the difference and which one is best as well as the viscosity figure ? manual specifies UDT for front axle too ? Is this ok ?

Hi everyone, just wanted to stop by and let you know that I am a new, excited owner of a 2011 Kubota BX25D. I can't wait to expand my knowledge and experience with all of you. :)

Santa brought me a FEL grapple. Anyone seeing me doing anything wrong here, or shall I carry on? The tips of the grapple just barely touch the front edge of the toothbar, not the teeth, the horizontal bar that lays parrallel w/ the bucket, left/right. You can see the business end, the grapple...

__I am looking for opinions guys. I am adding a FEL Grapple to my BX25, adding "The Thumb" I am. I am going to afix a pice of 3.5 x 3.5 Angle to the top of the bucket via welding. I have seen guys notch the back in 4 places so-as to get a wrench in there on a nut but I am not liking that. The...

I posted in an older thread of mine, HERE. Then I realized this area was here. Any seasoned hydraulic guys here please? CLICK HERE

2010 Kubota BX25 Case anyone is looking. I've not finanical interest in this just saw a great deal on Craigs list and thought I'd pass it on!

My bx25 was running great, up until I got off today. When I got off the motor cut out. I tried re starting and it would not crank. I jiggled the PTO lever and it started and ran for a while. Now the motor just cranks and it will not start. Any suggestions?

My bx25 was running great, up until I got off today. When I got off the motor cut out. I tried re starting and it would not crank. I jiggled the PTO lever and it started and ran for a while. Now the motor just cranks and it will not start. Any suggestions?:confused:

Last winter, my first with this tractor and BX2750D snowblower, I used a 400 lb ballast box and it seems that a lot of the time I had trouble steering in the float position, especially in deep snow. Running in 4WD helped some but it was still a problem. I thought the weight would help with...

Gents might I please get some opinions here? For my new BX25, in 48" width only, Gearmore has a box scraper that weights 355 Pounds in stock, it is a manual, 4 individual ripper tooth unit so each time you want to rip you have to drop 1 thru 4 teeth or 1,2,3 or 4 teeth, all manually done...

Just received my new BX25. Now I need to buy a trailer for it. After reading most (up to page 78!) of the posts on this form, I am still undecided on what to buy. I have gone from a 16' flat bed to a 18' 7000lb dove tail to a 10000lb dove tail and now I am back to a 16' flat bed with a tail...

Fellow BX25 owners, can someone tell me what these things red line at please? The manual says not to rev it up for 50 hours I think, so I have not been going past 2400 RPM or so. What will these lil pitbulls tach at all day long running hard? I do not want to put the pedal to the metal for...

Hi all, I have had my BX 25 for about 2 weeks now. But I have noticed that it is very difficult to engage and disengage the 4 wheel drive. Is there a trick to it? Also I read that you should not have 4 wheel drive engaged on a hard surface for long periods of time. Is that true? thanks

Anyone have a way to eliminate the ROPS on a BX25 and still support the seat when its turned backwards, a place to mount the lights and also a way to cover up where the two mounting plates go with the four bolts?

I have a bx25 and the bucket sits on the ground on one side but not the other, it is about 1/2 in off. Can a hydraulic cylinder on the arm be the cause? You can get the bucket to sit level on the ground by forcing it with the hydraulics but you can see the right arm stops and the left goes...

Hi all, I am buying a tractor...soon I hope. I spent a lot of time looking at the BX25 and thought it would do everything I need it to do. Loader, cut grass, plow snow on my 350' drive and most importantly, install 2 200 foot french drains, clear out the creek running through my yard and put in...

I am about ready to buy a new BX25. I would like to equip it with a thumb. Does Kubota make their own thumb. My dealer says he has never sold a tractor/BH with a thumb. I have read the posts on the Bro-Tek and a few on the Wallender (sp) but have not read anything about a Kubota thumb. The...

I have about 4 acres and will use it for snow plowing and tree planting, stump removal. Both models come with bucket and back hoe. Does anyone have any idea what machine is better? thanks

Please evaluate this price based on new machine for $17K and zero financing. Both new and used are stock, loader and backhoe only, no mower, no 3pt link package, no extra hydraulics.

About 3 months ago I lent my BX25 to a friend to move some rocks. I found out a few days later that a stick had gotten stuck into the HST Fans Fins and broken some of them off. My friend quickly turned off the machine and replaced the broken fan with one from the local Kubota shop. He tells...

Does anyone have a dump style grass catcher for their BX25? I use to have a Scag zero turn that had a dump catcher instead of the three bags. I love the PTO drive for the fan on my BX25 but I hate dumping those bags!!! It would really be great to see this for the BX series, just the back section...

I recently purchased a new Kubota BX25 and retained my Kubota Grass Catcher GCK60-BX because my local dealer told me it would fit on my new BX25, previously I had the grass catcher mounted on my BX23 and it worked perfectly. Can anyone tell me if there is a way to retro-fit the GCK60-BX to a...

This is just my intro post.. I will be mostly interested in Kubota BX series and ZD mower series. I've had a ZD 28 for over five years now and have been very happy with the quality of the machine. I just purchased a BX 25 to work on projects around the house(tear up the yard) remove some trees...

Good day all, I have a Kubota BX25 and have just purchased the cyclone rake Z10 with MDA adaptor. The mower deck is a 54" standard cut. QUESTION: Inside the mower at the discharge end is a metal plate that reduces the discharge chute opening and angles towards the rear. It bolts from...

Could anyone tell me where the grease fitting is located for forward reverse treddle? Also how often to grease it? Thanks in advance

NEED HELP WITH MY BX25 AND BX2537A POWER BROOM? HOW LONG SHOULD THE DRIVE SHAFT ON THE REAR PTO. I GOT IT USED AND IT IS ABOUT 3 3/4 INCHES SHORT.CAN ANYONE HELP WITH THIS ? THANKS

Does anyone know if the Loader will still attach to my BX25 after I have the front mount "Kubota Quick Hitch System" installed for my (ON Order) Front Mount Kubota snow blower. One dealer I spoke to said YES and one dealer said NO. Does anyone have a Kubota front mount blower on their BX 25? Are...

As most of us know, the BX has miserable work lighting, particularly at the rear. So i was sitting there in the dark thinking about it when an idea came to me... Replace the red rear light lenses with clear.. so easy and it almost makes sense. Not like im going to go cruising the highway on my...

So, apparently the battery on the BX25 is dead. It started yesterday when I had the 4-ways on while the engine was turned off. They were only on for about 5 minutes, and when I went to start it back up it would not start. Had to jump it with the car and it started right up. I then let the engine...

Sup All! I am the proud new owner of a BX25. I have all of 4-5 hours on it and I see a hydraulic leak . The posistioning of the flare nuts on the BH control valve is so close together it is nuts. I went searching for the right tool, I think I found it but I seek re-assurance, tell me YES, that...

AWSOME, my grin is from ear to ear. I FIALLY GOT MY FIRST TRACTOR! :laughing: __I see the BX25 comes stock with a BEER HOLDER! Yea! :thumbsup::thumbsup: Two thumbs up to the engineers! I think I will name here Orange Crush or Crusher for short. :confused2: Here, have a cigar; ..one for all...

Gents has anyone utilized the 4 front bolts up front that hold the engine guard in place for a winch? It looks like it is screaming for a winch. I see lots of pics of guys stuck...I want out and fast. I get my new BX25 in about 3 hours...I'll have a better look at it then. Has anyone done this...

I just get my new kubota bx 25 over the weekend and when the tractor is leaning to the left about 8 inches lower then the right I can feel a vibration Like something is rubbing while moving and stoped. I leaned it to the right and was fine. Called dealer and someone is coming to look at it soon...

__Looks like I am getting a BX25. Below is a list of attachments I am considering. __My question is, why do I NOT want this equipment and what / who makes better OR, if you were getting it, what would you do kinda deal.. __It is a small tractor, I think I am trying to keep all my attachments in...

Are there any skidplates available for the BX25? I think it will be high on my "to do " list when I get one since I will not be buying a mower. Additionally the front steering cylinders look like a possible place to smash as well, whereas a good skid there might be invaluable as well, ehh...

I want to get a log splitter but am confused by the Kubota Power Beyond (PB) feature. The 3PT splitters I have seen so far only have two hoses. I would propose to use the Backhoe hydraulics which has the three hoses. With the BH off the PB hose couples to the Supply (P) connector and the Tank...

I am wondering if there is an auger that fits in place of the front bucket, like skid steers. It must fit on a Kabota BX25. I know there was a snowblower that ran on the rear pto and now they have a blower that fits on the front, so I was hoping someone is making a from auger as compared the...

Hello , dear People I疥 a owner of a BX 25 in Holland and a like to have some pictures or and drawings to make a 3 point fronthitch including drive shaft !! I hoop some body can help me ,,thank you in advance !! Regard Zunnie from Holland:thumbsup:

Looks pretty cool, just wondering if anyone has used it? DR Power Equipment - Dual-Action Log Splitter - 3-Point Hitch