kubota b7800

Hi- I have a 2004 B7800 and this is the first issue I've had with it. While stacking wood today I noticed my lights went out and my fuel/temp guage stopped working. The tractor continued to work fine. I shut it off to take a phone call and when I went to turn it back on, the only light that...

Started this yesterday and ready to fit the real anchor.

Hello all, Fairly new Kubota owner here, and complete newbie in plowing. I have access to a single bottom plow, an old Skjold that was pulled by an old Ford 8N. Knowing very little about how a plow works, I am wondering if it is worth the time to mess around with attaching it. Both, of...

Does $12,500. sound like a fair price for a b7800, it has 188 hours on it. That price includes a loader, pin on forks, a box blade, and a scraper blade, it is 4 wheel drive hydrastatic transmission. The tires are loaded and there is probably a few other small things that have been added to it...

looks like the b3200 or b3300 replaces it, but WHAT is the next bigger(size) replacement from the b7800 still in a b series. also i would like a backhoe as i have one now what model would that be? i see people recommend the ATI ssqa attachment , is that still the way to go? because you are...

I have a kubota b7800, 30hp, 22hp rear pto. Any recommendations for a good pto driven chipper that will handle the up to 5" material well? I am looking for a tough machine. Thanks.

I was called by a neighbor that their tractor was running fine one min, then when shut off, failed to start again later. Engine cranks strong... just won't fire. I checked bat voltage and it was fine, checked fuel system from pri filter towards fuel pump and that was good, return fuel supply...

I really love m 2005 B7800! I have had it several years but I am wanting to sell it and buy a Kubota that will handle a 6' bush hog. My b7800 with fel works perfect as far as power ratio with a 5'. I use it pretty hard on wild cherry trees and chinaberry trees. So I do want the power ratio to be...

I have a leaking front axle seal where the gear case pivots when you steer. I have an shop manual for it and don't anticipate any big problems. sounds straight forward with a few snap rings to remove. My problem is that the seal is 45 bucks and the bearings are under 10 bucks. usually it...

I originally posted this in the general buying/pricing forum but guess I should have come here. I am looking at buying a 2007 Kubota B7800 HST with LA402 FEL, Kubota B2782 front mount snowblower, Bush Hog RDTH72" 3pt finish mower, and Bush Hog RTS62 tiller, the machine shows 270 hrs and is in...

I am looking at buying a 2007 Kubota B7800 HST with LA402 FEL, Kubota B2782 front mount snowblower, Bush Hog RDTH72" 3pt finish mower, and Bush Hog RTS62, the machine shows 270 hrs and is in good condition. The seller told me to make him a fair offer and I don't want to low ball and insult him...

I have an L4200GST / bucket and backhoe, but am considering picking up a used B7800HST for use in smaller areas and for lighter-duty tasks. My 4200 lives at my camp with it's 1000' gravel driveway. I mostly use my tractor for driveway maintenance, light landscaping tasks, occasional backhoe...

I was bushhogging and hit a hidden stump and the tractor died. Nothing new there... That's happened before. (you dont want to buy my old rotary cutters! ) Usually I disengage the pto and restart the tractor. This time it felt like the pto lever didnt make back and forth correctly so I figured...

I'm looking at a B7800 with low hours and R4s. I need to mow about 2.5 acres of lawn which I currently do with my BX with turf tires. Anyone have a large B series with R4s that mows? I've read differing opinions, but am concerned the R4s will tear up my lawn. I really wanted turfs but its near...

Is this something I can do in an hour? I would probably have to loosen the alternator to get it off? I managed to see a fray point, the unit has over 600 hours, so I do think it is time anyway. I had to stop in the field and clean up the air intakes, so I noticed it. Did not see it on...

Issue!!! I was mowing yesterday (brush hog), Hit a pile of dirt and the tractor died. Took the mower out of gear, pushed on clutch and tried to restart the engine. Nothing, Nothing. I turn on the key, instrument panel lights but the engine will not turn over or even click as if a battery is low...

While contemplating downsizing/consolidating I ran into the B26TLB. I was impressed by the loader capacities and the backhoe digging depth/height. I did not see that Kubota had not included the HST+ as in the L45TLB and wondered, why not? The 3 PT Lift was the same, Engine/PTO HP more for...

Hello, I have a b7800 kubota and was just wondering what type of oil is ok for the front end? Can I put in the same tractor fluid I put in the hydrostatic drive? Please give me the skinny because I have talked to ten different people and have got 50 different answers! Lol :confused: thank Nic

Many of you might have already read my previous thread about my b7800 that went thru a barn fire. The tractor is now running and put back together almost. I have to paint the tins then I will start to post picks. I am having a problem finding the hydraulic cylinder packing kits at a good price...

Howdy folks, I have been out of Country for a bit. I need to sell my 2004 Kubota B7800 HST, 4x4 Tractor with 380hrs. It has R4 tires, Mid and rear PTO, ROB. All maintenance is up to date, garage kept, EXCELLENT condition. I sold the Belly mower. It was only used for mowing a 5 acre plot. I...

Hello I have a kubota b7800 tractor that was in a fire I am in the process of painting it all that is when I get it all back together. My question is there are a couple different colors of the kubota orange, I need to paint the tractor,loader and backhoe. Where is the cheapest place to...

Hello I have a 2007 kubota b7800 that was burned up pretty toasty in a barn fire. It burned everything plastic, rubber, paint, etc. so as you can probably tell it would have probably been a better idea to just take it to the dump. Lol I was able to get the motor to run and the...

I picked up a Mid Mount Mower for my b7800 the other day and I am hoping someone here can help me out. The mower is perfect, but they guy I bought it from had already sold his tractor and left the mounting hardware on it! I talked with the new owner and he is happy to take off the parts and...

I bought a used sub frame and plow for a b7800 (2791 and 2765) and need some help. I purchased the manual online but I could really benefit from some pics.

I've had a B7800 with the LA402 loader for almost 5yr snow with about 250hrs on it. It seems like the loader doesn't have quite the lift that it did new. I have been pushing it a bit harder than usual lately (building a limestone retaining wall) and hitting the relief valve. I know I've lost...

I have multiple threads on this and spent an hour or 2. I bought a 10a circuit breaker (which I learned about by researching here), but it trips instantly and then I have to wait for the 5-6 seconds before I can try to start again and sometimes several times. I thought the cb would allow my...

Hello folks, You all were so helpful with advice about buying a JD, which changed our minds from sub-compact to a CUT. I definitely want enuf clearance, and the 30 HP won't hurt either. So now we're zeroing in on a used Kubota B7800HSD. 2003, with 1050 hours on it. Includes a loader (sadly...

Is a Brush Hog BH750 a good match for my B7800? I am not sure on the weight of the BH, but it looks pretty stout. It says the BH750 is for tractors 25-40 horsepower, the B7800 being 30. GPM requirement is 8gpm, that may be more constant flow than the tractor wants to provide. The psi...

Just found a nice 2007 B7800 with fel and mid pto option. The tractor has 29hrs and looks brand new. The gentleman is asking $13500, seems fair I think. Is there anything I need to look for on this model that I might miss?

Can I add a mid pto on a b7800 if not originally equipped? Looking to downsize by getting rid of a zturn

I am looking at a custom made plow that was made fro a B7800 and was wondering if it would fit on my B2410. Looking for a few frame measurements on the B7800. width of frame in front and length from front of frame to loader mounts. any help would be great. jim460@aol.com

Will a LA403 loader for the B3030 fit on a B7800. If not a direct fit how much modification will it require if at all possible?

Ok i bought a new denso 40 amp alternator off ebay for my B7800. I saw a thread last week somewhere on how to wire it up and for the life of me can't find it now. I've fabricated up everything else just need to wire it. If someone could give me some insite or a link to a thread on how to do...

Looking for a medium duty 5' clamp on snow blade for my B7800. Suggestions appreciated.

Having a problem with my 2006 Kubota B7800. Front end loader raises but will not go down. Bucket tilts as usual. I'm think that something is wrong with the 4-way valve, as is doesn't seem to be dumping fluid. Any ideas?

I have 3 B7800's. 2 out of the 3 have rear axle leaks on the same sides. Average use on flat ground. It's a few drops a day, but it is unsightly as the axle and inside of the tire rim gets all fouled. The seal has to be replaced from the inside by splitting the case. I am not to keen on that.

Remove the dipstick from the tube. Check the end of the dipstick to see what the fluid level is. With the tractor engine off, the hydraulic fluid should register at the "Cold fill" line. If the fluid isn't at that level, you need to add more What is the "cold fill " line ?

Hi all, I have a line on a 4-way plow setup that was custom built for a b7800. It has a custom sub frame that bolts to the 7800 and then it lifts and swings a 66" Meyer style blade with hydraulics. It looks like a good deal. But I have a b7200. So my question is (before I go look at it) how...

Hello. I recently purchased a BH75 backhoe for my B7800. It came with a subframe also off of a B7800. I think the mmm is suppose to work with the backhoe subframe installed. The problem I have is the lever which sets the mower deck height(at the rear) contacts the subframe when I lift the mower...

I just purchased a used kubota B7800 and need a front loader for it. I know the kubota LA402 loader fits it but not sure of any other models. If anyone has any leads on a used LA402 or one that will fit with little modification please let me know. Thanks in advance

Looking for a BH6500 or BH70X for my B7800. Would prefer 4-point subframe included. Thanks. 406 885 6193 Travas.

Hello I've got a B7800 with a Woods LS84 loader. I just picked up a nearly new Kubota BH75 backhoe with a subframe,also off a B7800. The only issue I have is both Woods and Kubota incorporate a bracket into their loader subframes that the backhoe subframe bolts to. The Woods bracket on my...

I have a b7800 and it was running fine. Next start it would start and die. I assumed that I had a fuel problem and may have had. checked fuel filter replaced and still same thing checked fuel and it appeared that I had some jell in bottom of tank and black looking stings so I emptyed the tank...

I have to replace the clutch bearing. Just thought you guys might want see some more pictures. This is my 1st time and everything is going good. The loader frame had 32 bolts holding it on, over kill and it's heavy.

So my 7800 just shut off the other day and I haven't been able to start it since. It shut off abou 15 minutes before that and started up with no problem. Once it shut off this time, that was it. My son was sitting on the seat and I was putting some wood in the bucket and it simply turned off...

Looking at a B7800 w/FEL < 400 hours. Serial number is 56916 but not sure of the age. Can anyone ballpark the model year for me? Thanks!!

The 3 point spped control knob on my B7800 seems to locked. I can't get it to turn in either direction. The manual doesn't indicate how to unlock it. Does anyone know how to get it to release?

i was wondering if anyone has had problems who has switched there b7800 to a quick attach front? anything like less lift cap, or more trouble then it is worth. i want to do it to mine, but for the money i want to make sure it wont be more of a pain then it is worth. thanks all

I'm looking at an 08 B7800 with L402 Loader. I have a question regarding the loader. While test driving, I could not make the fel lift the front tires. Sales guy said other 7800 units he has had did not lift the front, either. I've had a BX, L, and M series. I'm pretty sure all of the fel...

At 180 hours I switched from standard to synthetic Mobile One oil and now have lots of black smoke. I am up to about 205 hours and it seems to be getting worse. The performance is unchanged-excellent-it just smokes like crazy. Any time it is under a load it smokes. I have never had this happen...

Snapped left front axle housing 7 yrs old 1000 hrs

What I mean is - when my backhoe is parked in the barn the feed and return lines for it are connected by QC's to form a loop and the ready-to-open line intrigues me as an easy source for TNT use or any other use by addition of spools and cylinders. However, I know that some tractors derive...

Howdy- Have not been on here for awhile. I need to do the 300hr Service on my 2004 B7800HST 4WD. Anybody know where to find a good detailed manual on how to change all the oils it needs done (Front Diff,Hydraulic,Tranny, etc) I wanted to do this before selling it. We moved cross country and all...

Looking to part out my B7800....the pto broke and tore apart the inside and cracked the housing...not sure if anyone has a good resource for parts other than local dealer...was told I need to spend around $5000 to fix?!?!?!?! Engine, loader, gannon, tires are all GREAT......Own many other...

Can anybody tell me if there is a cross reference for the oil fllter on my Kubota B7800 tractor? How about the trans filters? Thanks in advance. I did go to Napa and they did have one but they wanted $12 for it and my goal would be to pay less than the dealer price, not more. Or perhaps there is...

Are these two tractors built on the same frame? Can parts be switched between the two? What about attachments, will they interchange? Thanks for taking the time to atleast read.

In doing the 300 hour service I drained the fluid from all 4 drainplugs, removed the two filters, and cleaned the strainer. The manual states the system capacity is 3.83 gals. So I put in 3.5 gals to start and checked the dipstick, thinking I'd top it up afterwards. It reads well over the...

Looking for a good used transaxle for a B7800 or looking to sell a TLB with bad ring and pinion, carrier, transaxle case.

I'm looking into purchasing 72" mid mount mower deck for a B7800. Do I have to go with a Kubota or does Landpride or woods also make them for this tractor. I would consider used as well but I am exploring all options.

Ok fellas......I need a hand if you wouldn't mind. I have a 4 year old B7800 with about 350 hours on it. It has been a great machine and I have taken care of it. Yesterday I started it up, it ran for about 15 minutes just like normal. I was trying to scoop some dirt to put in a raised garden...

My B7800 began cutting out late last year and has begun doing it again this year. There does not seem to be a consistency to the engine dying. It does it when I am mowing and when I am driving. It will die and I will start it again and begin to engage the pto and then it dies again. It does this...

What would be a good replacement for the b7800, i dont really keep up with these things i got a b7800 with a la402 loader , and a 3pt backhoe attachment. i see the b3300su is nice but people say its just a low price model to compete with others. also i see the b3400? seems to be close what is...

I recently sold my B7610 Kubota. I loved it but I always felt that it was just a bit small for my needs. So now I'm looking to upgrade to a used B7800 or L2800/L3400. I did a spreadsheet comparison of the specs and the B7800 seems to meet my needs the best - except that it has that doggone...

Somehow this never came up but do you check the trans fluid on a B7800 with the machine warmed up or cold? When cold mine is low but warmed up is closer to the operating level. Thanks.

I have a B7800 that I bought new about six years ago. Moderate home use over the years and though I have pushed it at times, I have generally kept up on maintenance. Last year I noticed when I used the mower deck it will struggle and bog down when going even slightly uphill or cutting longer...

First time posting. I am interested in putting a step to mount my B7800 Kubota and noticed a recent posting about this same matter. Does anyone know of somebody that would fabricate this so I could mount it?

i have not seen this tractor in person, but pics look like its in excellent shape. they have all maintenance records. They are asking 10,500? Is this fair, high, or good price? 2004 Kubota B7800 w/ Loader It is not a kabota loader but the woods model 1008. HST Transmission 30HP, 1 Owner 460 HRS

i have not seen this tractor in person, but pics look like its in excellent shape. they have all maintenance records. They are asking 10,500? This fair, high, or good price? 2004 Kubota B7800 w/ Loader HST Transmission 30HP, 1 Owner 460 HRS

Going to look at a B7800 with 204hrs on it. This will be a first tractor purchase for me. Is there any known issues with these that I should look for? It comes with a tractor w/cheated cab,trailer,FEL,Backhoe,Brushog,post hole& york rake. What would be the low and high end for purchase...

B7800 402 Kubota loader. Bucket curl bleed down. Kubota service center replace o-ring seals to correct a bleed down problem with the bucket curl last week. Yesterday I noticed problem was not resolved.Talked with the service center this morning and they said they may have to replace the...

I have a b7800 that is stuck on ice in my driveway. i need to inch it forward with my truck to get it to the end of the driveway. the BH is on but the FEL is removed since the reason i need to get it out is to have a snowblower installed. Where is the best place to attach a tow strap in the...

I need to take my K B7800 about 50 miles to local dealer for some maintenance and repair. I have a tandem axle flat bed, 7000# capacity trailer to haul it with. I am planning on ratcheting a 5/16 chain in the front and one in the rear is there anything else I need to do to be legal ...

My start relay is acting up on my Hydrostatic peddles, Im not sure where the switch is but it doesn't want to start after you shut it off. rocking the peddles sometimes works. The tractor is kept inside but I haven't used it much the last year. Any thought or suggestions.

Earlier this year I had skidded out some 22" diameter maple that I had bucked into 20" rounds that my Hearthstone wood stove would accommodate. I had not anticipated those large, long rounds being impossible to hand split with my Fiskars Super Splitting Axe. When I tried and failed to split...

Wondering if there is a way to adjust the 3 pt arms so that they will go a little lower. seems when using the box blade it is just a little bit too high. I looked over it tonight but did not see any obvious adjustments?

I have had my B7800 for about 8 months with no problems. I changed all of the fluids when I first got it in May (approx. 200 hours). Everything was fine after that. A couple days ago I took it out of the barn and neither the FEL or the rear 3-point will go down. Both will go up; the FEL will...

Hi Folks, Looking to buy a new or used 5 foot rear mount snowblower and plan on leaving the FEL on for counterweight and snow moving. I've looked a Blizzard and they look impressive.I 've also noticed a used Schulte 6200 for sale recently. Any recommendations? Is the new B64B worth getting over...

I have a chance to buy a JD 660 tiller that I want to use on my Kubota B7800. From what I have seen, this seems to be a fair price with all the new parts, assuming it really is in good workable condition. I have a question, though. Will this be too much tiller for my B7800 (30 hp, IIRC)? I...

A Kubota salesman told me today that a B series does not have the flow capacity to run a log splitter effectively ? is this correct?

I would like to put a step on my B7800 Kubota (has to be customized)they did not make one for the B7800 although they are available for the L2800 B3300/B3200 new they are around $50 plus S&H is there another source used maybe someone could recommend? Thanks

what does the safety switch to the right and below the operators seat & above the axle do? Can I put a step on this machine to make it easier to get on the deck and onto the seat?

I've been thinking about getting a smaller (B-sized) tractor, but haven't been able to even begin to pick, although I know I want 25-30HP. I've always thought Kubota did a lousy job at presenting their products - I can never tell how they compare with each other and why I would pick one over...

Reading several threads on other Kubota models on this subject I've gained some info. But need more help. Here's my dilemma. 2nd hand tractor running great, I've had it a few months (less than 100 hours), less than 500 hours total on this 2005 model. Couple weeks ago it just died. I smelled...

I know the obvious points ( grease nipples) on the FEL and the 3 point are their others?

I am installing a rear remote on a B7800 with loader and have a couple of questions. Should I use 3/8 or 1/2 inch jic hose for the Pb, return, and low pressure return. Are the fittings on the tractor I will connect into #6 or #8 jic. Thanks,

A friend has asked me about buying a used B7800 FEL, Heated Cab, HS Drive w/ 460 hrs.....$13,950....:anyone: Not knowing if it's a good deal, wondering if you guys could shed some light on this Tractor/loader......guess it's been dealer serviced and coming from same dealer...... Thanx in...

I'm setting up this year's winter tractor project, rear hydraulics. I've seen many great threads about rear remote hydraulics and have found a ton of valuable information. My question is this: has anyone installed a rear remote on a B7800 specifically. To be honest I'd like to use your...

Our B7800 had approx 172 HRS when we acquired it. The filters and fluid were changed. When & what for the next maintenance?

I bought a used B7800 at an auction thet has 12.4-16 r4 goodyear rear tires. Both are in good shape, but the diameter is 3" different causing the tractor to lean. The tractor is 4-wheel drive also. My 2 questions are: Which is the correct diameter? (they are approx 37 1/2" and 34 1/2") and Where...

When I start my tractor and hit the pedal to move (forward or reverse) the tractor shuts off????? I'm thinking something is shorting out but not sure where. 1st thing I checked were the connections under the seat and they seem OK. Any one else have this problem or suggestions. (I hate...

Beginning to look for a tractor. Just bought a house on six acres. Will have 300 ft. of gravel road to maintain. Will also be putting on an addition - will have to excavate about an area 25' x 35'. Also, will need to do some clearing to put some trails in the forest behind the property...

Could some one please tell me where to locate the pressure relief valve on a B7800 for the lift hydraulics. Also, does any one have the range the hydraulics can operate in on the 7800. I want to increase my lift capacity on the la402 loader and don't want to exceed the max. pressure. I plan on...

Wanted to ask what I can look for in solving the problem of my mid mount mower raising and lowering slowly on my B7800. The quarter inching settings are not working at all. I usually have to move the controller up and down several times to get the mower to raise or lower. Thanks in advance!

Does anyone have the complete electrical diagram for the B7800? The one with all the safety circuits is what I am after in particular.

Folks, Need your expertise, I have Ag tires on my B7800 and I am hard on the front loader moving large rocks 500lbs+, also with the narrow base of the tractor tipping is an issue. If I swap the front tires and reverse them giving me a wider stance will that help? Can the tractor's front...

I've just picked up a low hours B7800, and I'll be buying a trailer next. If anyone can help me with length and weight of the B7800 with FEL and BH (probably a Woods BH80-X), so I can spec the trailer, that would be very helpful. I have to trailer the tractor to the Kubota/Woods dealer to get...

I have been looking into plumbing my Diverter valve on my Kubota tractor but I have limited experience with hydraulics and power beyond. I have a WR Long diverter kit with very vague directions. I triped over a couple of instruction videos that were very helpful to me and I though I would share...

Howdy folks!! Quick question, can a La243 FEL fit on a 2005 B7800HSD? If not, what would be a good place to buy a used one that Kubota says fits. I have looked everywhere!! And looking to spend less than $2,000 LA402-1 LA402FL LA402 Thanks all Semper Fi

The boy ran it out of go-go juice. I've heard the stories about having to bleed lines and not running so well afterwards. Anybody have any advice before we try to start it back up?? Hoping that it's a self bleeder and it takes care of it's self. Thanks

The 4 solid rubber tires need replaced and Kubota want almost $100 each. Has anyone found a good replacement? I have about 300 hrs of mowing on them.

After much discussion and research I went to my local kubota dealer to buy a backhoe. Thought I narrowed it down to Bh76 or Woods BX70 to BX80. Some had said the 80 was a little much for the 7800 and one of the sales guys agreed. The other said I would have no trouble with the 80. I had decided...

Folks, Also looking for a trailer for my B7800, the back tires are filled and I have a BH attached. I have a Toyota Tundra that has an 8700 lb trailer capability and it has the towing package option. Which trailer do you guys suggest? Thanks, Drew

Looking at buying a B7500 without folding ROPS. But, need to make sure it will fit in my garage. Can someone that has one give me a quick measurement?

Anyone have the Bradco 408 backhoe mounted on B7800? Thinking about mounitng with subframe--subframe interfere or extremely difficult to mount? Anyone have problems with 408? Likes or dislikes? My use will be just around property--nothing too heavy--hardest probably taking out a few trees.

I am very excited to have joined the tractor owner society! I just bought this B7800 w/210 hours and Salsco 824 chipper that looks practically new. My wife was not particularly on board, but she likes the size and is a huge fan of the chipper. (She is a teacher and gets "snow" days so I hope...

So I am leaning towards a b7800 and hoping you can all give me some feedback. I have 56 wooded acres with some trails that I hope to improve. My gravel driveway is about 500 feet long. I only have about an acre of irregular lawn to mow. My intended uses are snow removal, cleaning up an area...

Just purchased a used 05 B7800 with L402 FEL. Has 160 hours and would like to find backhoe. Researched old posts and found alot of discussion about Woods, Bradco and Kubota. Based upon research would like to find used backhoe with subframe for my tractor. Looks like BH75 kubota and Woods 7500...

I have a B7800 I bought new so it came with SUDT in the HST. I now want to change it and substitute J.Deere trans fluid because of price and convenience . I know this is OK but has anyone with a B7800 (or close) done this and noticed any performance difference? All I do is mow the grass with it...

Got my third flat on my front left tire of my B7800 today. Finally brought them in to be filled with foam. What I noticed when I popped them off is that the rim is much deeper on the inside than out...at least a couple of inches. Anybody ever turn them around? Only problem I can see is...

B7800 first tractor.Trouble seeing bucket and forks when using.Question is B3030 with slanted nose easier to see.Or taller track tor like L3240 easier. Thanks

I purchased a Kubota B7800 from Bob Wolf @ Woodbury tractor 7 years ago at 40 hours 6 years ago I had Bob do the service. Now don't mad but I now have 70 hours on the tractor. When I had the service done I purchased all the fluids and filters I would need to do it my self. I would like to...

My 2003 B7800 has a very loud 'sqeak' when I first start up the tractor and back it up. It will only squeak when the tractor is moved, and the squeak coincides with the movement of the tractor. It is worst when backing up. It is the same with the front wheels engaged or disengaged. It is...

I was out roto-tilling a few gardens today with my Agric 65 tiller. On the third job the customer pointed to a 6" stump with what looked like last years growth on it and wondered if I could get it out. I just got my B7800 last year and was impressed the way it handled the tiller. Normally I...

Hello, I went from a B7800 TL to a B3200 TLBH, I'm not to inpresest with the loader. It seems cheaper then the one that was on the b7800. I have the Kubota QC bucket and i'm thinking I dont like it. What does everyone else think.

I have had my B7800 for about 9 months now. Probably only 20 hrs. more than when I got it. Was using it today in the garden and it would just kill. Sometimes just a little and sometimes to a stop. It would start right up. Before I get all the manuals out and start the painstaking process of...

:confused: Hello, I've lost my manual for my Kubota B7800 and I need to lubricant many parts on my tractor. I was told to get a silicone greaser for my tractor but I don't know what parts to use it on. It says to lubricant every 10 hours and I'm way past that. can someone post a picture of what...

b7800 all of a sudden quit and won't start again. It keeps blowing the 30 amp fuse to the fuel solenoid before I can even get the fuse in all the way. It doesn't matter whether the solenoid is plugged in or not. Anyone know what's up?

I am just starting to look into chains either for the frt. or rear. Does anybody actually know where to buy them? Also does any body know if I can get front fenders install or made for my B7800. When I drive the tractor to another location for snow removal. I have to drive on salted roads which...

This morning while working with the B7800 got off the seat and within 15 seconds it died would not start again. Everything is in neutral,parking brake is on. Looked underneath and noticed near the clutch springs a 1/4" or so bolt dangling ???? HELP!! first day I have been able to work since mid...

I was wondering if someone could answer this question for me. Does anyone know, or does someone know how to find out if an RCK60-27B mower (for the B2910/B7800) will fit onto a B3200 ? I know they officialy list the RCK60-27BA for that model, however since the B3200 is so similar to the B7800...

New guy here.. :) Does anyone know if RCK60-27B mid-mount mower (for the B7800, B2910 ) fit on a B2920 ? The B2920 docs call for a RCK60-29B, but the prior 2910 model used the 27B, and I thought (hope) they might be cross compatible. Anyone know the answer to this ? Thanks in advance, Dave...

I am looking at a used 2003 Kubota B7800 with what is stated as a Hydro 12/12A transmission. What is this? Is it a true hydrostatic or is it a hydro shuttle?

I will be selling my B7800 here soon and need to determine an asking price. I purchased the tractor new in 2003. It has an LA402 FEL, 60" MMM, and a Pyramid landscaping box. I used the tractor for mainly mowing my 3 acre field. It only has 120 hours. Is there a pricing guide in which I can...

I tried to put chains on the front R4 tires on my B7800 and found that there is not enough clearance between the tie rod joints and the wheel. Has anyone solved this problem? I read something about reversing the wheels, but I am not sure what that involves. I don't plan to use front chains...

I'm 1/2 done with making new 3pt arms. I like the sliders on my L4240, so I thought I would make some for my B7800. Waiting on the weld on ball ends right now, then the other one well get done and painted. Couldn't wait until I was done to post the pictures.

Anyone else have troubles with their diff lock? I bought my b7800 in aug of 07 after doing my research on here to help determine if it was a decent machine. I believe kubota makes a fine product, my dad bought a new b21 around 1992-93 that has never had an issue. Based on my experience with his...

Hi, Went to move a pallet of firewood with 3pt and the frame of a carry-all. (used like a forklift) Wouldn't even make it budge. Used the front loader which did the job nicely. According to the manuals, I believe The 3pt is supposed to have a greater lift capacity than the loader. Does...

Other than the obvious hp difference are there any significant differences between the B7800 and the 3200? Are they built the same or is one built tougher than the other?:D

Went to the local dealer today to check out the newer B3200 with FEL. While I was there talking to to sales people. They suggested that I also look at the B7800 with a FEL. They currently have both in stock. Both still boxed, not weather damaged. They felt that the 7800 series tractors had a...

I've got a 2008 B7800 with less than 100 hours. I'm the second owner. I think that I may have a proiblem with the power steering. When I have a load in the bucket (even a pretty small one) and am on the driveway, it seems as if there is no power steering. I have to be moving in order to turn...

Is there a grease fitting for the differential lock I have been pulling it back up by hand. What is the advantage of having the telescopic arms as on the B2910

First 5 hrs on the B7800 fun fun fun we got 11 plus inches of snow 2 day,s ago so I got 5 hrs of serious seat time. Never owning a tractor before and being in the VA mountains was not the best scenario for a beginner but all went well. The slopes on the road and driveway took 100% attention...

B7800 3 PT knob,should this be in the lock position when starting and also not in use,when I do have an attachment hooked up should the knob be in the locked position when starting? also mid and rear PTO to off position unless in use. This is my first tractor any other advice is welcomed.

what type of apparatus would I need to put a 2" ball on back of my B7800 I would like to move a small trailer approx 500# I also have a 16' tandem axle flat bed approx 1800# just need to position trailers.

serial # where is the serial # located

I have a B7800 with a Curtis Cab. After owning the B7800 for 5 years I finally got a LA402 loader installed. I see a potential problem when it comes to fueling now that I have the loader, with the cross bar passing over the top of the fuel cap, and the Curtis Cab installed. Without the loader...

First post ever, was thinking of putting chains on rear of tractor clearance issue called local kubota dealer wanted $290 for inch and a half spacer for each side totalling 3" as much as the 2 link v-bar chains I was thinking of putting on, also I saw a post on here about building my own pallet...

Does anyone know how that I might be able to put chains on a b7800

is there enough room for chains to fit on a B7800 ? Front 23. 8.50 / 14 Rear 12.4 - 16

I would like to add a coouple of things to my b7800 if any one has done this talk to me on problems and where you found the add ons. First I would like to add a step to sides to allow for an easier mount to the tractor. Second has any one found and located tele arms to replace the bottome lift...

He is a little clip of my latest set up YouTube - kubota plow.wmv

I see it is still listed on the Kubota website, but I remember my BX1500 was still on their site for many months after it was discontinued... If so, I may consider it as a possibility for my next tractor. They seem to be popular, strong and affordable.

Has anyone upgraded their B7800 Headlights ?

any opinions on a woods 1008 vs a kubota loader pros cons ?

Check the Kubota web site B7800 competitive comparisom, It says position control standard. Must be a typo.

Ok, I'm new to this site as of today and don't know much of anything about tractors so I sure would appreciate some help. I have a 600' "s" shaped uphill gravel (not much gravel left) driveway. The driveway is located at the top of an open hill overlooking a valley in central NY. To put it...

Hello, I think I already know the answer to this, but will a RC72-29A mower deck fit a B7800? Thanks

another snow plow adapter thread - b7800 & western I found a pretty decent looking 7' Western plow locally and I am thinking about adapting it to run on my tractor. I know there are a bunch of threads on here on this topic already, just looking for some specific advise. I would like to mount...

... thanks guys....

Has anyone replaced the rear axle seal on a B7800? I am wondering if this is something I can do myself, or if it requires any specialty tools. Any info. would be appreciated.

Ok found a used 72" tiller for a great deal... but I was thinking that a 60" tiller was probably the limit for my little 30 hp B7800.... As it's dirt cheap... should I get it and just go "SLLLLLOOOOOOOWWWWWW" or should I keep looking for a 60" tiller?

I have a B7800 new to me [39hrs] question, I know where theres two backhoe;s one a 4672A self contained 3pt unit .the other a quick hitch unit uses the tractor hydro system . I would use about five six times a year , small stuff around the pond and small ditching jobs nothing big . I:D like...

I am considering a front snowblower for my B7800 and am wondering how pleased people are in general with snowblowers on tractors. I have a paved driveway about 400 feet long with an uphill curve to it. I currently have a front blade which works well enough but of course makes the driveway more...

ever since I changed the air filter my idle speed has gone up. before it would idle just below 1000 rpm and now it idles just above 1000 rpm. the service manual makes no mention of idle speed adjustments just timing adjustments. is this normal?

It's came down to either a Kubota L3400HST or a Kioti CK35HST, both with FEL. I'm trading a 2005 B7800 with 110 hrs. Some of my observations: CK35: more comfortable suspension seat; L3400 has flip seat with spring. CK35 has tilt steering, L3400 does not. CK35 has horn, L3400 does not (not that...

Help! I noticed that one of my headlight bulbs was out so I opened the hood and here the bulb was still burning, it had just fallen out. So I figured it just needed to be twisted back in. Couldn't get the plastic ears/clips to catch and since it was dark I just decided to twist the other bulb...

Hi Folks, My weeds grew... like weeds this year and my KK tiller feels like I'm tilling cement while inching through the thick crabgrass. I don't look forward to 15 hours of tilling this month. So, I'm wondering if a Farm Force Disc or what ever brand TSC sells these days is what I need. My...

My throttle was very stiff when I took delivery of the tractor and I finally tore it apart and freed it up. After several years and 600 hours more it was becoming very stiff again. For those that have the same problem here are the steps that need to be done to free it up: The job only takes...

Hello, I need some help. My B7800 ran fine the other day but would not start yesterday. It cranks but does not fire up. It kind of acts like the hard-to-start behavior right after I change the fuel filter (which I did a couple months ago). Short of taking off a hose, is there a way to test...

Hey guys does this sound like a good price? 2007 B7800 with about 60 hrs on it new FEL and MMM for 13500? Let me know!

I noticed while brush hogging last night that the hydraulic hoses and fittings on the loader valve (loader was not on the machine) were very hot to the touch. Is it normal for the hydraulic fluid to be that hot? The tractor engine temperature seemed to be normal according to the temp gauge. Paul

I have had my B7800 for 4 years and a day as of today (8/3/09)! Last week, while cutting my yard, my tractor dropped to the ground and my right front wheel kept on going! I was amazed, disappointed, and pissed off - all at once! I got off the tractor & was shocked to see the axle hub snapped...

Hey guys I've been a forum "lurker" for a few year now...I think I'm ready for my first Kubota purchase. I'm looking at the B7800 and I find out it is being phased out. What is a GOOD price for a new B7800 with 60" MMM and FEL with 54" Bucket? Say with R4 tires as well. I was thinking a deal...

I know there is a thread on removal of a 60" MMM for the B7800 but i cannot locate. Is there anyone out there familiar with this thread, or would care to share how to easily do this? TIA!!

I am finally getting around to purchasing a tiller for my Kubota B7800. I have done some searching for the appropriate size however nothing yet. A few questions; do I go by my engine HP rating or my PTO rating? 30 engine and 22 PTO. Tractor Supply has a 48" CountyLine Tiller for $1600 and a...

Hey Folks, I'm new here. I hope everyone is doing well! I bought a well used B7800 HST. It runs and drives fine, but the lift has a problem. It's pretty much either up or down. It hasn't failed to lift anything I've hooked to it so far, but it comes up real fast. And going down is like you cut...

I have a LA402 loader with the grill guard attached to my B7800. I want to be able to use 3pt attachments without the loader on. What weight bracket do I need to use suitcase weights? Can I use the loader with the bracket installed? I don't want to be unbolting stuff everytime I put the loader...

On my B7800 the HST pedal is not returning to neutral properly when I remove my foot. This just started recently and has the effect of keeping moving when I remove my foot as well as making it difficult to start as I have to move the pedal to get it to the right place hit the saftey switch. Is...

Folks, I am in quite a dilemma. I am buying a tractor within the next few days and I am torn between the Kubota and the Cub Cadet. They are priced exactly the same ($15,200 and include the FEL). THey have similiar characterisitcs in engine power, hydraulics, and lift capacity. However, I do...

50 hour service... I drained the oil but didn't have a wrench to get the filter off, so I waited until the next day to take off the oil filter. As I unscrewed it, it only dripped a couple drops of oil which surprised me. When I took it off completely, and looked in it, it looked clean! I let...

I am approaching the 800 hour mark and it is recommended that the valve gap be checked. I've done them on other machines but not on the B7800. Is it as simple as regular valve adjustment? It looks like the injectors are in the way and need to be removed prior to adjustment. Has anyone had...

I've been looking high and low and can't seem to find a way to put a 2 or 3 spool rear hydraulic set-up on my 7800. My dealer says only a one spool set-up is available. I'd like to do it as "factory installed" as is possible. Can anyone offer some suggestions? Thanks, Bill

Afternoon everyone, My name is Charles and will be buying my first tractor this coming week. I will be using the tractor to mow,move rock,dirt,snow,dig stumps,etc and also remove trash on about 6 acres. i have narrowed down my search to B2920 or a last year model B7800 both will have loader w...

Hi, I was wondering what the difference is between these 2 tractors. I was looking at a 2920 and the 3200 and have seen them side by side and could see the difference in size but the dealer didnt have a b7800 to look at. From the site it looks like the b7800 might just be a older model of the...

Hey guys, I need a grapple for my my Kubota B7800. Nothing fancy, just a single cylinder two arm grapple to move piles of brush, cut trees around. Looking at some simple ones online that cost about 400-800 bucks (just for the grapple and cylinder). What I'm trying to find out is how to...

Can someone tell me where I can get a copy of the owners manual?We moved and I can't find mine.The local dealer didn't have one. Thanks

Geesh, I sprang for the expensive $40 Indian made TSC upper arm, get it home, greased it up good and it doesn't fit into the tractor side bracket. Is it too wide or is the tractor too narrow? Does the $20 Indian made one fit? All I have is a dremel for grinding, and the cat 1 hole pivot...

Any suggestions as to the value of an 07 B7800 w/ loader. Thanks, daro

I am looking for a good used backhoe for my B7800. Ontario made Wallenstein's come up every so often. I have found a GX500 (small, I know) with a Wallenstein sub-frame (SF-3440KU) that appears to be for a L3400 series-see attached PDF. The guy selling the backhoe has a B7510. I have also found...

Howdy Y'all, My B7800 lost power and died completely after a minute - won't even try to turn over. Air filter is clean and fuel filter is pretty new and looks clean (20 hours or so.) I'm in the middle of putting in crops and need to get up and running right away since I'm already running...

Anyone have the weight comparison for these 2 machines handy? Thanks ...

I really need some help. I was going to purchase a New B2920 MMM & FELArond $16,500. Then I ran across a friend of a friend that is selling a 05 B-7800 witharound 300 hrs 72" MMM FEL 4' roller back blade and more. ASKING $12,000 seems like a pretty good deal? Can't decide. HELP

I am hoping that one of the members that have a B7800 and that has installed rear remotes would be able to tell me what tee fitting I would need for the return line to the tank. I called my dealer today and unfortunately they were no help. I would like to purchase the fitting in advance of...

I have a Kubota B7800 with a BH. There are 2 hoses that run from the FEL valve to the rear of tractor. When these hoses aren't being used for the BH, they are connected into each other. I would like to add a rear valve to control a cylinder on my sickle mower This cylinder is used to raise and...

Well I finally solved my L225DT front axle problem!!! (Sold it to a guy who only needed to brush hog) I bought a 2006 Kubota B7800 HSD from a neighbor!! (Only had 75 hrs on it) I notice that there is quite a bit on noise from the front whenever I have it in 4WD - Anone experience this? Any...

Looking for the size bolt or screw that helps hold on the rear PTO shaft cap. The cap you put on when the rear PTO is not in use.Would think the b2710 an b2910 would be the same as my b7800. Never had one and the tabs on the sides just will not keep it in place any more. Thanks

I have a B7800 HST 4x4 with about 120 hours. We use it manly for mowing 4 acres. Yesterday it started making a noise when moving in high gear. It's hard to describe the noise. It's not grinding or crunching. It kind of sounds like the cartoon Jetson's car. Switched to medium and low and nothing...

My B7800HST seems to bind when the 3pt is lifting. It will lift for a way and then you have to relieve the pressure on the control lever before it will continue to lift. It will lift whatever load you have on it but this condition exists. Does anyone else experience this? Is it a normal...

I have a B7800HST, 2003 model with approx. 400 hrs. The 3 pt. lift works fine, except that when you engage the lift lever, it will lift some then seems to bind, if you release the pressure on the lift lever it then will lift the rest of the way as soon as you engage the lift lever. Has anyone...

I have a Kubota B 7800 with a front end snow blower. My problem: when I lower it, it is uneven on the ground. Are there any suggestions out there?

Went to one Kubota dealer and was quoted almost ~$300 for a replacement seat for my B7800 (bought it second hand and the original owner did not take advantage of the free seat replacement program). The first dealer I went to said the replacement program ran only a few months back in 2007...

A friend just bought an 07 B7800, 56hrs, FIL, and 60" deck for $12,000. Wow what a deal. Anyway he wants to be able to hook his 3pt log splitter up to the tractor. My thinking was to just have him get the hydraulic hook up kit for the BH75 hoe and install that kit. He could then just have...

Hi Everyone. I went to the dealer with the intention of test driving and possibly purchasing a new 2920 with a FEL and filled R4's. No other options I tried it out and feel it would meet my needs. The dealer is trying to steer me towards a new leftover 7800. He says he will sell if for the...

I had a missing bolt on my loader frame, (the ones that go into the clutch housing) so I went and got a bolt but wouldn't you know it things are never as simple as they seem. the hole is stripped and I took out another bolt to make sure I had the right bolt before torquing them all down. I...

A question for B7800 owners with some history first. After much looking and almost buying another brand I found a good deal on a Kubota B7800 TLB. It is an out of state delivery and the dealer has a excellent reputation so that doesn't bother me. What bothers me is that the local dealer...

Just an informational post that I sold my 2005 B7800 for $15,500. I know people are always wondering what the market is like. I originally had it on Craigs list in November for $16,000 and lowered it to $15,750 at the beginning of the year. Tractor Info: 2005 B7800 with 500 hours Loader...

Hey I am in the planning stages of purchasing a tractor and have made several calls to different dealers in the area to find the best bang for the buck. What I have found is that New Holland, Kioti, and MF cannot come close to the price I was quoted for a B7800 w/loader of $15,247 w/ 0 down, 0%...

I finally got around to solving the frozen FEL control issue, thanks to many on this forum. Indeed there was water in the 2 cylinders that house the springs for the FEL down and FEL Curl In functions. Everytime it was below freezing I had to play with the controls and wait 10 minutes or so for...

I have a B7800 with a LA402 FEL and a BH75 BH. When the dealer installed the BH, they they removed the hose that went from the hydraulic block to the FEL PB port and installed a new hose from the FEL PB port to the rear of the tractor, they also installed another hose that goes from the rear of...

Hello, this is my first time on the site and I am looking to convert my 3-pt turn-buckles to pin and bar linkage. My question is to find a good source for parts other than my dealer. I have no problem with my dealer we are good friends, I am just looking for new source without the KUBOTA price.