kubota b7800

I don't know this person but have seen alot of WA traffic here so figured I would throw this listing out there. hopefully there is no harm in doing so.. http://seattle.craigslist.org/see/for/192216223.html cheers, bigballer

I don't know what price I am looking for so I think I'd like input on what to look for. My B7800 has 150 hours on it. Will sell with FEL, fluid in tires, 5 foot woods rotary cutter, 5 foor rake and 5 foot blade. B7800 has no knicks or dings, IMHO looks new, the attachments well 0 look used...

My FIL in has a B7800 gear model that we use for mowing in between Christmas tree rows pulling a 40, 42 or 48" rotary mower. The dilema is with the gearing and ground speed. Rear PTO speed #1: 540rpm pto @ 2600rpm engine Rear PTO speed #2: 960rpm pto @ 2554rpm engine If you use the 540 PTO...

Hello every one My name is Timber (AKA) Charlie I have been planing on buying my tractor for a year now just waiting for my ducks to line up in a row. I have been studining this group for about 3 weeks now reading everything I can and thank you all for such great information. I just cut a check...

After driving both the B7800 and the L2800, I have decided I prefer the L series over the B based on overall comfort/feel. I hadn't really considered the 3400 but when I started calculating the overall cost it seems the 3400 is the better deal. Using the quoted price from my dealer as base price...

Hi folks, I'm about to purchase a B7800 and had one area of contention. The dealer said the a 60in MMM would be better than the 72in MMM. He really didn't go into detail other than mentioning that he does sell many 72 in MMM. But I've got to thinking over the weekend, My end result is to...

Has anyone figured out a cupholder for their b7800?

On the way home I went back and test road a B7610 and then the B7800 for the second time. I like the additional power of the B7800 and figure it is the step above what I need and won't out grow. But this time I ran both machines wih the engines running so the PTO would be running at 540 rpm...

All are HST, FWD withOUT a FEL. B7800 $11,800 L2800 $12,200 L3400 $13,200 Good, bad, average? This is a north Georgia dealer. Still flying blind but narrowing it down.... Thanks.

I am trying to decide if I really need a B7800 over the B7610 (or toerh equivalent brand sizes). I have about 3 acres of pasture and over an acre of lawn. A 60" deck will make grass cutting fast. Right know it takes over 8 hours with the 38" deck John Deere. The touble is I need to build and...

My local dealer (Washington state) is charging $15,900 for the tractor with 402FEL, wondering if this is a good price? cheers, bigballer

b7800 & \"power surge\" I was transporting a brush hog on a country road last night. I was in high gear, and every once in awhile, I would get a little surge - similar to a turbo boost - while driving. I had the pedal down the whole time, so it was not due to me changing the speed. I have...

I am purchasing a 2004 B7800.I would like a service and parts manual,anyone have them or know where I can get them other than dealer.

I was looking at my manual and on one page it said "you have to operate a clutch to engage rear PTO". On next page it lists all the steps/safety issues without mentioning operating clutch. When I use PHD if clutch is depressed it's impossible to move PTO lever. But it moves and engages PTO...

Hi all, Well after much consideration I ordered a B7800 yesterday along with the LA402 FEL and a rotary cutter. And that is what prompts my question. Previosuly I was going to buy a B7610 and was told by my dealer that a 48" cutter was the best fit. When I decided on the B7800 instead I asked...

Pat\'s Easy Change - B7800 Does anyone have experience with this set-up? From the product description, it seems that the "straight-line" on my lift arms are not long enough to make this work. Any help / tips appreciated. mlg

Well, I've been doing my homework, and I'm pretty well decided on the B 7800. The only feature of the B 3030 that interests me is the telescoping links for the 3PH. So, my question is this. How much could it possibly cost to change out the links to the telescoping type from a 3030? And is it...

Well, I've been doing my homework, and I'm pretty well decided on the B 7800. The only feature of the B 3030 that interests me is the telescoping links for the 3PH. So, my question is this. How much could it possibly cost to change out the links to the telescoping type from a 3030? And is it...

I need replacement seat for my B7800. Dealer priced OEM seat at $210 or $230 (depending on my serial number... they had a mid-model change). The B2910 seat is about the same price and includes armrests, but they said no guarantee it would fit. Actually, the first seat fell apart so quickly in...

Well, I pulled the trigger. I bought a new B7800 with FEL and a 60" rotary mower yesterday, had it in my driveway this afternoon. Now, I have to work the rest of the day with mowing on my mind. Sad. All told, I paid $15,300 for the tractor and loader, plus 650 for the mower. I'm pretty...

I am considering a BL4690B backhoe for a Kubota B7800. I have learned that the BL4690b backhoe mounts on the 3-point hitch vs. on a sub-frame. The BL4690b also runs off of the PTO and has its own hydrolic system. I can't find any specifications on the BL4690b Backhoe... What are the pros/cons...

I am new to this forum and would appreciate some help/advice. I have decided to purchase a B7800 and am confused about the best approach for a backhoe. My options seem to include: 1) buy new tractor with the Woods BH80-XT backhoe, 2) buy new tractor with a Kubota BH75 backhoe, or 3) buy a...

Hello Gentlemen & Ladies I just cannot decide on the right tractor for my needs. Here's the skinny. Six acres. Back is sloped 10-20 degrees. Put new addition on house and removed about 1.5 acres of trees. Need to move alot dirt (grading, filling), take out a fair number of stumps, a few...

I am fairly new to TBN, but have been reading advice off this site for a long time. I recently purchased 10 acres of rolling hills, no trees except along creek at back of property. 8 acres will be pasture (fescue, eventually native prairie), 2 acres of grass to mow. I also have a 200 foot...

My dealer has quoted a BX24 at $15500 or $17100 with 60" MM Mower. Have been reviewing the specs and think the BX will be somewhat limited for work down the road. That got me thinking about an HST B7800 with FEL and Backhoe and mid PTO...sort of a super BX24. Seems like it would be alot more...

Im new to compact tractors and need help. Is thtis a good price? B7800hsd 4wd industial tires 420 loader w/ ballast box rck 60 mmm befco 5' box scraper TOTAL 18700

Looking to up grade to a L39 TLB and need to sell my B7800 first. B7800, LA402 loader with a Bradco BH. No other attachments. The tractor is about 3 years old and has around 200 hours. Any ideas on where I should start?

New B7800HSD w/ FL and 60\" MMM Hello everyone, I am new to Kubota and my new B7800HSD with front loader and 60" mid-mount mower deck. I have been using the 7800 to mow my 5 acres which is too hilly for a ZTR mower and requires running the tractor in 4WD continuously. I am new to tractor in...

owning-ML-864839-ML- Kubota specific thread.

Has anyone added a step to the Kubota B7800? I loan my tractor out to some elderly kinfolk and it pains me to watch them step up to the operating platform. In another 15 years or so, I'll be needing it myself.

What L series tractor, L3400 or L4400, would be about the same size as the B7800, but have a whole lot more power and FEL capacity?

What is the overall height of the B7800? Thanks KC

New presentation, details, specs, photos on the new 2006 B2630, B7800, B3030, B3030 Cab Kubota units Link Enjoy and best wishes, Steve

18\" PHD Auger on B7800 Does anyone think I can successfully dig 18" holes with a 30 HP (~22 at PTO) compact tractor? I want to drill several 18" holes for 6 X 6 posts for a barn, but don't want to buy a PHD big enough to do it if my tractor doesn't have the capacity. Will be drilling in what...

Just received my new B7800, 402 FEL and an lX4 JD brush hog. I will be doing woodlot management (12 acres wooded New England hillside), fixing up the lawn by filling in holes left from the last logging efforts etc. Has anyone experience with a log splitter for this? Would love to find used if...

Does anyone know of any performance parts available for the B7800 to increase HP?

Today, I hired a company to do some heavy-duty chipping at the top of my property. They showed up with a 6000 lb. chipper on the back of a Chevy Silverado. There are 3 rather steep inclines on the dirt road to get there, and it rained a couple days ago making things slick. Sure enough, the...

Please help this newbie on his first tractor purchase. I found a used B7800 which seems like a good match for current and future projects on my new 10 acre plot of ground (bush hog mowing, light excavation, gravel drive maintenace and snow removal). It has the dual-attach (4690 style?) backhoe...

Anybody help me with the difference between the B3030 and the B7800? Thanks.

Just bought a new B7800 with an LA402FEL and a 5' rotary cutter for brush. The dealer says the bucket is a 60" bucket but everything I've seen indicates a 54" bucket. Anyone know about this? Delivery in about 2 weeks.

To all the B7800 owners out there, what other models did you compare it to before you bought? JD, NH, other? Thanks

After three years of operating without a front loader using three antigue tractors I finally got the perfect size for my small orchard. Here is a picture on its maiden voyage. Once out I had to hop it to the burn pile as it is a little too heavy for the B7800 without ballast in the tires. Shortrees

My dealer is having a hard time getting the sub frame for the bh75 on the B7800. It has been on order for 30 days. Any one else having a problem?

hi, i am getting a B7800 with FEL. this is my first tractor and i am wonder what to expect maintenance wise. also, can anyone give me some useful links i can use? are there any other good kubota forums? what websites should a search to learn more about my tractor and attachments? thanks for any...

Guys, I'm thinking about selling my B7800 Kubota. I don't really want to but I would like to buy a big ZTR and don't have the money to keep both. Wanting the ZTR to do commercial mowing. I don't know what the Kubota would be worth. It is a 2003 with only 260 hours. Has been very well...

I just bought a new B7800 with FEL less than a week ago. This is my first tractor, so operating this great piece of equipment has been a fun learning experience. However, this morning when i went to use the tractor, I noticed some hesitation with the HST...like the transmission was just not...

A couple of weeks ago it was asked if there was a foot for a B7800 in this thread. Click Here I stopped at my dealer. He said that he had installed a couple of steps on a B7800 using step from a L2800. I ordered one. Part # TA140-47470. $19.25 plus tax. Installed it today. Attached a picture...

It's kind of funny, I ended back where I started and got a B7800 today. I guess if I had just done it a few weeks ago I may not have felt as comfortable about the decision as I did today. Hopefully I will still feel the same way after I really get to use it. I'll take delivery on it in a...

Are there brighter bulbs that I can put in my 7800 without melting anything down. The factory bulbs are completely worthless! My 7610 had much better lighting.

This tractor does not come with a step. Has anyone added or made one?

I currently have turf tires on my B7800. I would also like to get a set of Ag tires for it. Where is the best place to get tires and rims from? I can paint the rims orange myself if I have to.

I was very close to purchasing a B7800 or B3030 today, but I had a little uncertainty. This was mainly because I don't have a trailer yet for hauling. I need to know the overall length of both the B7800 and B3030 from the front of the bucket on the ground to the end of the 3pt hitch. And if...

Immediate uses: 10 acres = 5ac finish mowing (few obstacles), landscaping, and snow removal + 5ac woods (tree/ stump removal, rock moving) I've quoted each of these tractors with FEL, 6' rear blade, & 72" rear finish mower. They are all within $1600 of each other. Kubota most expensive (only...

Does anyone have front snow chains on a b7800 HST with R4 tires? I am getting ready for my first winter with my new tractor and snow thrower. I noticed there is only about 3/4" of clearance between the front tires and the edge of the tie rod (or what ever you call the horizontal bar that...

I found out a local dealer just had a couple of trade ins. I stopped by today. He's got a used 3000DT with a FEL with under 500 hours. Seems to be in decent shape. Stored indoors. About 5-7 years old. He will let it go at $15000 cdn. Or I can have a new B7800 for $16900 cdn. No FEL...

Is the 3030 worth the extra money ($1800) in Central FL. over the 7800? Ernie

web page

web page

Does anyone know what the fuse marked work light is for on a B7800? I don't have a work light at this point. Is this an unused fuse (20 amp)? I'm not very electrical literate. I would think I could add extra lights right to this fuse if it is currently unused.

After the typical months of comparisons, I concluded that there was no comparison for any new, any used, or any other model. Partly because of the limits of what's available locally, I just bought a b7800 from Pro Rental and Sales in Idaho Falls. Not a screaming deal perhaps, but not terrible...

buykubota-ML-753745-ML- Kubota specific post

After the typical months of comparisons, I concluded that there was no comparison for any new, any used, or any other model. Partly because of the limits of what's available locally, I just bought a b7800 from Pro Rental and Sales in Idaho Falls. Not a screaming deal perhaps, but not terrible...

Ok, I've been reading all the posts, test driving all the contenders, haggling over prices, and I need it to end!!! Strange happenings today. I had previously tested a B3030 and L2800 side by side. That time I just moved them back and forth about 10 yards and worked the bucket, kinda got a...

Kubota B7800 & Rotella \"T\" 5-40 I'm sure this is a re-hash, but, a friend is wondering if changing to the Rotella "T" 5-40 synthetic in his B7800 (90 hrs or so on the machine) will void the warranty, cause any problems, etc.. so, I figured I'd post this then show him the thread results. Thanks,

Back in august there was a post for a price on an L3130 and B7800 as follows: B7800 HST, Folding ROPS, Mid PTO, R-4 Tires $12,150 L3130 HST, Ag Tires $13,700 Prices are in Northeast Ohio and do not include sales tax. I am assuming these are 4WD, they don't come in 2WD HST do they? I am in...

buykubota-ML-729433-ML-

Howdy, I'm looking at getting a Kubota tractor and was initially leaning toward the L2800, called around to get price quotes and one of the dealers said I might prefer the B7800. The specs I'm looking at getting in either model are HST, 4WD, R-4 tires, possibly a FEL. I'm going to use it to...

I'm interested in hearing your opinions on one vs. the other. I'm completely new to tractors. Just bought 26 acres. 10 of it is forest and I plan to leave it that way. Of the 16 acres left, all is pasture. The land is flat. I plan to mow about 3 acres of the pasture regularly. The rest...

Anyone out there know where I can order manuals pertaining to my tractor? I need manuals for the MMM and the FEL as well. Thanks. KT

This may have been posted before but I couldn't remember seeing it. Since the B7800 and B2910 are the same tractor except for a few nicey nice features, what keeps a person from buying the B7800 and adding the upgraded B2910 seat and 3ph extendable lift arms? Has anyone looked into this? How...

I have about 20 hours on my 7800. I am looking ahead to the fifty hour service. Is this a DIY job, or should I send it back to the dealer? I have changed fluids on other tractors in the past, nothing with a hydrostatic transmission.

I got my first tractor 2 weeks ago B7800. Loving it. Parked it in the garage for the first time the other day and noticed liquicd on the floor the next morning. Clear, slippery. Talked to dealer who was going to pick it up and check it but then started discussing that had 17 hours on it and...

It seems that my 45-hour B7800 hates to mow. After about 45 mins or so, the temperature has risen too much to continue the MMM at 2500 rpm. Is this normal? All the fluid levels are checked, screen clean, etc... Thanks, Blee

I am planning on the purchase of the B7800 pasture and driveways as well as a ZD21 mower for our yard. Through the end of september Kubota has the zero down zero interest for 36 months. What I am wondering is is there usually a end of summer sale or should I not count on it. When talking to...

The may have been discussed already. Is the B7800HST a true 30HP tractor. I noticed on the Kubota's website under the specifications for the the B7800HST shows a 22HP engine and 30 Gross Horse Power. What is Gross Horse Power. Does that mean that is what the rating is when the tractor is under a...

I have no experience with either machine but I've been scratching my head between the B7800 and the L3130 for a while now. I'm going to want one or the other for snowblowing in Michigans upper peninsula (lotsa snow!). At any rate, do you think a b7800 might actually be more powerful at the PTO...

Well, I've been studying this site since about April and thought I had made a decision. I went in to my local Kubota dealer today prepared to make a deal on a new B7800. Dealer suggested the 3130 was a lot more tractor for just a little more money. I think so too, so I'm seeking the opinions...

What is the height of the B7800 to the top of the rops? KC

I recently bought a 8.5 acre property with some slow rolling hills and some very flat areas. There are quite a few trees in some parts of the property. My largest previous property lot was 90 ft x 90 ft, so I'll be a 1st time buyer. Basically want to drag a 5ft rotary cutter and do some...

Hey Folks- I have a deposit on a 7800 with a 60"MMM & FEL. I plan to maintain fields, cut my yard, & landscape & use the FEL for snow removal. I have a driveway that is about 250', plus the parking area. Is the FEL suitable for this? I had one dealer tell me that it would work well to plow...

Hi, I am a new owner of a new B7800. While I was out working with it today, I was driving in 2WD, when I was returning to the barn. I went to raise the 3 pt hitch, but grabbed the 2WD-4WD lever by mistake, and threw it in to 4WD on the fly. I noticed a grinding noise. Did I fry the...

I was considering buying an aftermarket backhoe for my B7800. Does this tractor require a subframe or will the 3 point hitch alone be enough support?

They just delivered my new B7800, Woods 1008 FEL, & Woods 7500 BH. Now all I need is a trailer. I have been thinking a dump trailer but will have to measure my set-up with the BH turned sideways. Will probably also have to hang the FEL on, or over the side. Hopefully a 6'x12' low - profile...

I have 5.5 acres that we are in the process of building on. I will have about 3 acres to mow and a 1400 foot gravel driveway. The driveway is pretty steep and will require lots of attention. I want to start with a boxblade and tractor, then a RFM and finally a loader. I am haveing a hard time...

I am just about to purchase a B7800 with a Woods BH7500 BH and a Woods FEL. ...not sure of the BH bucket size(s) yet. probably 8" & 16". Within the next couple months I will be building a 14' x 18' addition with full basement (8' wall) and a attached garage 24' x 30' (4' wall). The depth of...

my b7800 keeps moving on level ground after lifting my foot from the speed control pedal...what do i need to do to fix it? it only happens every once and awhile, but i'd like to take care of it now, while i can. thanks in advance...

After 100 hours I finally used it. Recently moved to a nice flat piece of real estate. I decided to bushhog around the property line since the grass/hay was 4 feet up. Half-way through the first pass it dawned on me I should use this set-cruise feature. All the creature comforts that got me to...

Anyone strip the bolt/turn buckle assembly out on the lower 3pt arms besides me on my B7800? It was always hard to turn even after greasing it,but now it just stripped out. Is there a better way to tighten the attachments? Any suggestions? thanks, brett w

After an incredible amount of time spent on research and comparison shopping, I finally committed and purchased a Kubota B3030 with FEL, toothbar, chain hook, HD alternator, work lights, filled R4s, brush cutter and back-blade from Neil Messick of Messick's in Elizabethtown PA. The fact that...

Can someone help me understand the theory of the LA402 hydraulic valve. I see two hoses coming from the tractor hydraulic block, one out and one into the hydraulic block. The other hose to the tractor in the rear to the hydraulic tank. Why do you need 2 hoses from the tractor block? It would...

Hi my name is erik and I live in southern california.the tractors I have been looking at are the 3320 or the b7800,the john deere dealer wants$23,532 out the door for a 3320 with 300cx loader and a 60''box scraper.The kubota dealer will give me a b7800hsd with a la40z loader,bl4690b...

Hello All: I just bought a 20 acre farm house garage and barn in Pa snow country. I have 1 acre around house 9 in pasture and the rest is hilly and wood covered. I am going to get 2 to 4 horses and have to put up new fences. I will need to mow plow snow and tend to stalls. B7800 B3030 0r...

hello,i'm new to this. bought a b7800 new 1 month ago.i really like the tractor, but the seat just isn't working for me.i would like to upgrade.stock b2910 or aftermarket.if you have any suggestions for me let me know.thankyou

I am thinking of getting a soft sided cab for my B7800 and I was hoping you folks might provide me with some answers to some questions I've got. 1. How much additional height would I be gaining above the ROPS? I have a height issue getting in and out of my garage. 2. My RM snowblower has a...

I’m having trouble mounting the backhoe – the top hole in the top link at the tractor does not line up - too far toward the tractor . I bought the b7800 tractor used last month, the backhoe this month. The backhoe came off a b7800. I don’t have the reinforced top link connector on the tractor...

I am considering a B7800 w/fel for use around my small 5 acre outfit. So far it seems like the most tractor for the money. I've looked at Branson 2810 and 3510. New Holland TC 30, which is close, and TC29D. I'll take the hydro over the Branson's 12spd, even though they where a little less...

First of all - this is a great site. I just wish it were easier to post and that the subject line wasn't so short. Given how much this site has helped me, I felt I should post my decision process. I sold a Kubota B8200 with a FEL (49" bucket) and a Backhoe (6') I wanted a tractor with a...

I am brand new to the tractor world, but learning fast. I recently bought a house on 10 acres in Northern tip of VA and we will be putting 1-3 horses on it once the fence and barn is built. The land is a gentle slope, mostly pasture but also some heavy tree/brush areas that need cleared. I am...

B7800 won\'t start I started my B7800 and let it idle for a couple minutes this morning, then shut if off for about 15 minutes. Now, when I try to start it, it fires and turns over, belches black smoke and immediately dies. If I hold the starter on, it can't quite run on it's own but I can hear...

I have purchased a B7800. I haven't figured out how to set the hyd lift so the mower returns to the same height. I have read the operators manual. It seems when you raise the deck and lower it, I must go pass the point I have set for the mower to go down. Any ideas?

New user here.....in the market for a CUT (30hp or so) for use on my 5 acre parcel. Will use it a lot preliminarily for mowing but have grand plans for an orchard and vineyard some day. (who knows when!) Have been checking the local area and have found B7800's with a Kubota FEL and 5' rear...

I am looking at dump/equip trailers for a tractor, FEL, & Back hoe ....and was wondering the total length? I wouldnt mind if I had to swing the Backhoe. Is the B3030, w/403 & BH75 shorter due to the 4 point mount??

Gentlemen- I have been considering a b7800, & I thought I would seek advice from those who know. I explained my situation to my local dealer, and he recommended the b7800. I have a 3 acre yard in SW PA. I cut it about every 5 days. Our yard has a lot of young trees, but I think we planted...

Strange thing happened when I was all set to sign the papers on a L3130 - the salesman talked me into a 4wd B7800 that was smaller and less expensive but had about the same horsepower and Hydrostatic standard. It was quite a bit less money but I haven't researched the thing as much as the L...

I wanted a auxiliary valve control on the BIG ORANGE to operate home built goodies (Grapple in front and Log splitter rear). So here is one way U can do it if you would like to waste some green and have fun doing it. 1. Start to break it down and location of valve.

I recently purchased a BL4690B Backhoe and B7800HSD Tractor from my local dealer. Reviewing the Kubota Operator's manual for the BL4690B, the dealer has set up the mast assembly as though the tractor is a B2910HSD with a 3-hole receiver at the top of the 3-point hitch (set-up is shown on page...

in my long on going quest for a machine, i think i'm finally getting closer. i was looking at the 3 above mentioned models. seems like the 3030 and the 7800 are pretty much the same tractor except the 3030 has the more delux features. i was able to try out the 7800 in the dealers lot it felt...

Just wondering if this is normal or if something wrong with tiller or tractor... I was running a 60" tiller off my b7800 (the tiller has a clutch mechanism not shear bolts). well i hit a 3" diameter tree root - it tore up the root but stalled out the tractor. i thought the tiller's clutch...

I had found a web site that listed some steet prices for most Kubota models and I can't seem to find it again. Does anyone know of recent selling prices on the B7800 and B2630 in the NY,NJ,CT area?

WANTED Photo\'s of B7800 rear remote hook-ups I'm wanting to hook-up a 2 spool rear remote and need a picture of home brew or factory connection to b7800. Can anyone help?

I've made a few comments over the past year that I bought a B7610 instead of a B7800 because it would fit alongside my shop. Well, here are a few photos to show the available space. When I bought the Kubota the shop wasn't yet started. But the dirt pad was finished. I had the plans made up...

Think I\'ve decided on a B7800, now some ?\'s Went to the dealer and the 7800 seemed right in size and power for me. Trying to decide if I should use turf tires or the standard tires... Here is the pricing the dealer gave me, I'm in central VA, I did a search on pricing and found a little but...

6\' Box blade on a B7800 - is it too big? I hope I didn't screw up I just bought a 6' KK Box blade for my B7800. Haven't even unloaded it yet. Anyone out there using that combo with success. Can my tractor handle it? If it is only a matter of weight I think I can weight my tractor a little more.

B7800 owner\'s manual Is there any way to get ahold of a operating manual by downloading? Or would anyone be willing to email or fax me a copy for an '04 7800?

I am trying to decide between the B7610 or the B7800. I have owned a B1750 for 14 years and am trading it in. The B7610 basically is the replacement for the B1750 with 24 hp vs. my old 20 hp. I like the greater power of the B7800, but am concerned that it will not maneuver in tight quarters...

hi, i just started looking and was hoping someone could teel me what a fair price for a b7800 with fel (maybe 4n1 ) and backhoe would cost here in va. thanks, chris

I was surfing EBay looking at tractor stuff and found: B7800+ LA402+18 x 83 trailer+5' bush hog+5'HD box blade with FREE SHIPPING for buy it now 4,600.US$ Only 5 hrs with full warrantee yet! Located in Montreal (where I live), that's why I got digging. I flagged EBay as for sure this was a...

I want to purchase the a B7800 with a LA402 Loader. I will have to wait on the accessories. What would be a fair price for the above. I am in California if that make any difference.

I thank all for their help,and love this site.I am now looking at the L3400 to move my logs,is this the right choice?Thanks.

I am looking at buying a 2005 b7800 and was wondering if is is enough of a tractor to work a 50 acre bush lot? I am looking to drag out my mixed hard and softwood from a hard pack fairly level terrain but with a few large rock outcropings.The trees are averaging 20 inch diameter and was hoping...

Hi, I'm just wondering if the glow plug indicator light on the B7800 is suppose to go off when it gets hot enough. Mine never seems to go off before I can crank it, and it does start after holding it down about 5 seconds. thanks, brett w

I need to buy a finish mower for my B7800, have heard a 3 poiint is best, then someone says belly, At present will have three yards of about an acre each to mow. I have heard a lot of good about woods. any expeience/suggestions apprecialted

When I decided to buy a compact tractor I did a lot of reading on this forum and on manufacturer's websites. This may sound crazy, but I never once went and sat on any of the tractors I was looking at. Nobody around here had anything I was considering. I finally settled on the Kubota B7800...

New to site, Looking to buy first tractor. Mostly used for mowing(approx. 3 acres), with light FEL work around the house. Will use to pull small trailer with fire wood also. Looking at B7610 vs the B7800 with FEL and MMM.

OK< I'll swallow my pride and ask a very dumb question. Beside the parking break lever on the B7800 is another lever. What is it for? (ps , a friend at work said there are no dumb questions, only dumb people)

Hi, My B7800 brake lock lever is not doing anything. Any suggestions on how to fix it? It never really seemed all that good a system to me, but now I have to fix it. thanks, brett w

All- The more I look, the more confused I get. Not too long ago I was all set to get the L3130. Then I became fearful that it would be underpowered for its weight, and I began considering the L3430. After considering what I would use it for, I thought maybe I could step down to the B series...

I have been waiting since 11-01-04, but it is worth it. Got about an hour and half seat time, pushed some brush piles, dug a pit to burn the remains of a shed I tore down and hauled some things in the bucket. A little bit of everything, I can't decide what to do first so am trying to do it...

I found a slightly used (59 hrs.) 30 HP 2003 Kubota 7800 w/ 72" in Land Pride rear finish and a 6' rear blade. Said he would sell all for $12000. Sounded good to me. Tractor looked brand new. Does that sound like a good price? Does anyone have comments about that model Kubota?

Need some close up pics of backhoe attached to 3 pt hitch. I took mine off 2 weeks ago. Now it's back on but it looks to low. I'll post a pic tommorrow. Thanks

I'm trying to understand what the advantages of the B2910 are over the B7800. The hydraulic outlet is listed as a comparative difference in Kubota's literature. How is the rear outlet useful? Any other advice related to these two machines would also be helpful.

I have been looking at the pros and cons between these two machines and thought the main con of the L3400 was the loss of the mid PTO and thus the loss of a MMM. However, when I was at a local Kubota dealer today the salesperson said if I wanted a BH on the B7800 they would only sell one that...

I am waiting on my B7800, fel and backhoe to come in. It was ordered 11-01-04. Dealer checked the computer today and said he was waiting for it to be shipped. This will be the forth Kubota I have had. Loved them all. I can still haggle price, but am at $20,853 delivered. How does that...

I just got a quote for a new B2639. It lists for 15102 and the quote was 12890 (15% off list). with a LA 403 loader (list 3517 price 2830) a BH75 backhoe (list 6822 price 6090) and 60 MMM (list 2422 price 2190) it came to an even 24000. I have narrowed down my buying decision to one of these...

Hi. I am new to this page but I think it may help me in my search. I am looking for a company that makes tractor covers, ones similar to lawn mower covers, but for 'bigger' tractors like mine. Does anyone have any suggestions?

Hi, Anyone know if the B7800 has a built in PTO slip clutch? Just curious since my tiller doesn't have a sheer bolt that I can detect. thanks, BrettW

Hey folks! I am new to the forum. I am considering a compact tractor. I am considering JD 790 & a B7800. I am looking at these based on what the salesmen have suggested for me. I thought that I would get better information from people who aren't trying to sell me something, and have...

I have a B7800 w/ 100 hrs. It has always run perfect- until today. I started it fine, ran it maybe 1 hr. and shut it off. When I tried to restart a little later nothing happened. It is like it has no battery. I did look to make sure. Any thoughts? Thanks, Billy

Anybody know the output of the standard alternator on the 7800? I picked up a couple 55w lights the other day and was going to wire them in this weekend. Forgot to call the dealer to see if the alternator could handle the additional load.

I am considering selling my B7800 with front end loader, 5 ft box, and 60"MMM. The tractor was bought new last summer and has 54hours. Thanks!

My joystick does not lock in float position-it springs back. I followed the thread on FEL float, and it seems everyone knows what the problem is and how to fix it (needs cleaning and oiling). What I can't find is where exactly this "detent" is located. Anyone cares to post pictures/instructions...

I have discussed this with my local dealer. He only stocks the B7800, so I am not going to be able to drive the B2910 to compare. My concern is rear bucket/scraper control. Can anyone tell me how these two systems compare? Which one would be more precise? Any advantages, one over the other...

I am a new member, after a couple of months of visiting the site. I am considering the B7800, or possibly the B2910 and want to explore a few questions. This first time post, I want to take some time introducing myself and what I have learned in my search so far. Sorry if this gets long...

Does anyone know the output of the alternator on a B7800. I am hooking up 4 extra lights that are 55 watts each and putting on a cab that has a heater and a windshield wiper on it. Just wondering if the alternator is big enough.

I got stuck yesterday and had trouble getting the wheel lock to work. How is it done exactly? Clutch, then lock pedal? Wheels spinning, then lock pedal? Pedal then power to the wheels? thanks again, Brett W

Hi, what does the little black button do on the B7800, just below the seat. It looks like a reset button of some type. thanks, brett w

Hello, Just got my B7800 back from a 50hr service and an altenator installed. The tractor is an awsome machine. I was using it the other day and realized that the float wasn't working and that when I gave it down pressure it would go then release. I guy that I work with has a bx23 and his...

Hi, Anyone know what the B7800 rpm speed is, in order to run a 5' finish mower at 540 rpms. Where I'm going with this is I'd like to run the finish mower faster to grind up leaves but I don't want to mess up the mower by running it way too fast. thanks, BrettW

I just bought a B7800 with a 63" snow blower for the front and a 72" woods grading for the back. I also am having the tires filled with fluid and chains put on the back. My driveway has a little bit of a grade to it and I am wondering if I will get stuck. Is there anyone out there that has any...

Thinking about buying the B7800 and wondering if I should go for the B2910. The 1/4"ing valve is fine with me and I do not care about the creature comforts of the 2910. I want a solid 30HP for basic work...mowing, loading, grading and woods work. Any thoughts from you happy owners!

Your experience on this would be appreciated. I live in the ridges of western PA and get 4 - 8" of snow with drifting for 3-4 months. I have to clear a 35x35' garage entrance, 50x10' of concrete driveway, 600x12' of private blacktop road plus an entrance that the township refiills regularly...

I know they are not exact comparisons, the B2910 is similar but the B7800 is much less $. I have owned Deere and want a 30hp tractor for basic HD work. The Deeres in NE are 10% more than Kubota. Any thoughts?

HI, I just changed the engine oil on my 2003 B7800. I use the loader to lift the front end. (FYI this is my first oil change (bought the tractor used) and the first time using the loader this way) When I brought the tractor down with the loader I found the battery light on. Turns out that the...

Thanks to everyone for this great resource. I am looking for advice in choosing a tractor to use on a 20 acre, heavily wooded, parcel at 7500 feet altitude. My main uses will be snow removal, brush chipping, and some material moving. A backhoe option would be nice but is out of my price range...

Hi, Going to do a total fluid change. Can someone just reply and tell me what kind of fluids I should use? 130 hrs on the tractor, uncertain if the 50 or 100 hr service was done. Hope so, but the fuel filter has some stuff in it so I'm not so sure. engine oil type and filter trans fluid type...

HI, I just got my (used) 7800. It has a Woods loader on it, Just wondering if there is anyway to adjust the loader so that it drops more slowly. It really bangs down harshly unless you barely touch the joystick. thanks, bret w

Hi, I'm going to pick up a used B7800 tomorrow, has 132 hours on it, 2003 make. What would you look over to make sure it is well maintained if it were your tractor. Change fluids? Filters? Grease ? just don't know much about it. thanks,brett w

Hi, I'd appreciate opinions on the TC 30 vs the B7800. Both with Hyd trans and loaders. I have 2 acres of woods to clean up and 2 acres of level grass to mow regularly. Thanks again, Brett W ps, price 14,700 for the TC30 (Bush Hog loader) and 14,652 B7800. (Kubota loader)

First time post after much observation. I currently own a J Deere X585- 4WD tractor w/ full glass cab, mid mower, front loader, 3 pt hitch. But, now I want a real tractor! I own an RV dealership where we have used 2 Kubotas for years & find the bullet proof, so I feel comfortable with one for...

Hi, I'm going to look at a lightly used B7800 tomorrow, just wodering if it is too be for my needs. I will mow mostly with it, about 2 acres. I plan using it in the woods once in a while for firewood and just to keep it cleaned out. This machine has a nice loader on it. I have a 4' hog and a...

I just got the B series brochure from my dealer and was comparing the two machines and for the life of me, the only difference I can see in the two specs is that the 7800 has a front hydraulic outlet and the 2910 has a front and rear (what ever that means). I guess the 2910 has a tilt steering...

My son and I are tall enough that we keep whacking our knees on the underside of the B7800 steering wheel; it's a pain in the butt when we have to get on and off of the tractor frequently. So I've been wondering if it would be possible to replace that fixed steering wheel with the adjustable...

My new B7800HST was delivered yesterday and what a riot! Thankfully a have a foldable ROPS otherwise I wouldn't be able to park it in the garage! I'm having a soft sided Curtis cab with work lights on top installed in a couple of months and was wondering if anybody had the same set up? I'd like...

A friend just bought a B7800 w/ FEL and 60" bucket, 60" MMM and foldable ROPS. Total package $16,500. How did he do?

Is it possible to widen the width of the front and rear axles? Seems to me I read something about minimum width, leading me to believe there must be a maximum width. Adjust the wheels full width on my 1952 ACWD when working with the FEL/Trip Bucket and narrow them up when hauling on a trailer...

New member, have been lurking unregistered for a while, reading everything and learning. First post... Just closed the deal (Potestio Bros. in Parker, CO) to buy a B7800 with the 402 loader, 60" brush hog, and 60" box blade to use for mowing, gravel road maintenance, snow removal, and FEL work...

Just bought a Slow Moving Vehicle triangle for my B7800 and I'm trying to figure out the best place for it. The back of the seat seemed logical, but I noticed it is covered up by the box blade when in transport. The chipper covers most everything on the rear of the tractor, so I'm probably get...

Appreciate the many good comments in the past few days, getting closer to taking the plunge and have another question. Does anyone know if a 4:1 bucket is available for the LA402 FEL and if so, can the B7800 handle it ok? I understand they are quite a bit heavier. Have to clean tops and brances...

I am looking for a quick attach "system" for my L402 fel and a set of forks - any suggestions?

I have a B7800 with a RCK60-24B mmm. First off, I assume the deck does not come with mulching blades, am I correct on that? I don't even know what mulched grass looks like so I can't tell myself if it's already doing it or not. Assuming that I do not already have mulching blades on it are...

I'm Looking to purchase a CUT with the most bang for the buck. Locally I have access to the big three. With my research I've narrowed it down to the above two. I'm on six acres, with 2 acres of wild grass, needs to be landscaped, with 3 acres that would need to be cleared. Priorites to be...

Width of 72\" mower for B7800 I bought a B7800 a month ago with a 60" deck. I would like to move up to a 72" deck. Question is how hide is a 72" deck with the deflector rotated up. I have some gates that are only about 75" wide. I need to know if I can get the 72" deck through the gates...

As part of the package price for a Kubota B7800, the dealer is recommending a Bush Hog RZ60, 60" rotary field mower. I'm going to use it on 4-6 acres of hilly horse pasture, and maybe a little bit of actual brushing out around the edges of said pastures. Anyone want to comment yeah or nay on...

Question for the minds ? Looking to sell what would be a fair price for a 2003 b7800, hst, 402 loader, frops, mid pto, 4x4 , toothbar , with bradco 3375 backhoe 100hrs on tractor 50 hrs. on backhoe machine has been used not abused .

72\" Midmount Mower Model # for B7800? Can someone tell me the correct model number for the 72" mid-mount mower that will fit on a B7800. I presently have a 60" deck, but would like to move up to a 72" deck. Thanks Scott

Hi everybody, I'm new to the site but have owned a '55 600 series Ford for some years. Before that I had a Ford 8N with a loader. I loved the loader, but on an old Ford they are just too heavy, no p steering and poor steering componenets on the front for the weight. I love my old Ford's but...

I just got a 15 gallon sprayer with a 12 volt pump and I need to wire it to my B7800. I suppose the easy way would be to use the alligator clips straight from the battery but I was hoping to find a solution where I can have a plug at the back of my tractor for it. It uses different shaped...

Looking to purchase my first tractor sometime in the next week or so and need to find out if the price quote I received today is reasonable. Quote: B7800 HSDF (mid pto/folding ROPS), R4 tires - 12,336 72" MMM - 2,948 60" Bush Hog Box Blade (SBX 600) - 547 5' Bush Hog field mower (SQ600) - 957...

I am in the process of buying a new tractor. My blood has run green for over 20 years but now I'm starting to look at the Kubota line. I priced a new 4115JD from my local dealer at $14,500 + tax and then went to a Kubota dealer. He gave me a price of $11,900 for a B7800 and $13,200 for a B2910...

Mowing Radius For a B7800 w/ 60\"mmm I am making progress on a pretty major landscaping job at my house involving putting in a large area of grass. I intend to outline around trees and other obstacles that will need to be mowed around with bark or some other material to make mowing easier. My...

First time poster, long time lurker here. I pulled the trigger on a B7800 with folding ROPS, loaded R4s, FEL and 72"mmm. I paid about $17,800 for the rig. I also added a 60" Landpride rotary cutter and a 64" Landpride tiller. My only question as of now is in regards to the tiller. I had...

Would Prestone antifreeze be a suitable coolant for my B7800? thanks in advance!

I am loving my B7800 even more than I thought I would. If I could get it in the house and up the stairs I'd have it sleep at the foot of my bed. I'll soon be getting ready to do the fifty hour maintainance but in the meantime I am doing the normal start-up checks and greasing occasionally...

I have no idea what phase of this journey I am on. Took me years to convince the wife that I needed this. In the end, it came down to a deal and a promise. The deal was that I would quit Copenhagen. So far that has gone good and I am definitely looking at myself as a double winner. The...

It looks pretty promising that I will be purchasing a 3.2 acre valley across the street from my home. I am purchasing it mainly to protect my view. It is not terribly builder friendly as it has about a 50 foot drop from the highest to the lowest part. It is stepped and has some flat areas...

Been watching the forums for awhile. Finally purchased my first tractor. Went with a new B7800 with the 402 loader and a Woods 60" boxscraper, and block heater for 16,250.00. Dealer is out of stock but has located one and should have it next week. Could have bought a 24hp JD (4115 I believe...

I got a qoute on a b7800 for 16,100 this includeds 72 inch mmm foldable ROPS and a fel is this a good deal it is the best that I have gotten yet. thanks

Just bought my first tractor; A Kubota B7800HSD w/ LA402 loader. I also purchased a BL4690B backhoe, a rear blade, and a posthole digger. The tractor with the FEL cost $15,900. The whole package cost $23,500. I can hardly wait to take delivery and put that baby to work.

I know I posted on this subject last year and started a firestorm, but I am really getting tired of having to blow out my air filter every time I use the tractor in the dust. The filter element is way too small and gets dirty fast. I can do some grading for maybe an hour and it's dirty. I mean...

I am in the market for a new tractor for doing general work around my place such as brush hogging, hauling fire wood, plowing a small garden, etc. I am either thinking about a B7800 with a FEL or a L3400 with a FEL. What are the major differences between the two? Also what is the going price for...

Hello does anyone know the weight and and length of a b7800 with a loader. need to know for a trailer

I thought I read this here before and tryed to do a search for ir but came up empty, what I am looking for are part #'s and to make sure they will fit from the 2910... the ones on my B7800 are shot (turn Buckles Threaded Rod) thanks

Can someone give me some specs on the B7800, a dealer told a friend of mine that it is 30 hp. Seems high to me. Price, new hydrostat, FEL, 72"MMM, seat w/armrests, R1 tires,$16900

I want to install a light in the dash (one of the empty spaces) which will warn us when the brakes have been set. One of the operators is somewhat disabled and doesn't have the leg strength to really set the brake. As a result he can easily run around with the brake on. Mechanically it is...

B7800 Won\'t start Well.... either I'm doing something stupid or I'm getting off to a bad start with this tractor. I had a new B7800 delivered on Tuesday to replace by '48 8N and it's been working fine until today. It fired up this morning, I used it for about 30-45 mins, then shut it off for...

Will look at and drive the '03 4310 ehydro w/60 hrs and 420 FEL @$16500 this Sat. Drove a Kubota new B7800 w/LA402 FEL @15780, both w/R-4. Any idea how these two measure up against each other? Couple of Kubota owners (buddies?) have Kubotas and felt the Kubota had better engine and...

Got it narrowed down the these three. New B7800/LA402 FEL/R-4 tires @15,780--JD4310 ehydro '03 w/60hrs and 420 FEL @$16,500--NH TC33D '03 w/20 demo hours & 7308 FEL @ 17,700. Drove the B7800 today and was pleased. Heard the Kubota has a better engine and transmission than the Deere (not from...

I found this forum and wanted to know if I am getting a good price of a Kubota B7800 with the 402 loader and 5ft brush cutter. The quoted me 16,700. This will be my first new tractor. Any advice would be helpful. Thanks Michael in MO.

When I got home on Friday afternoon the B7800 had been delivered by my dealer. Just thought I'd share a quick picture of the new sibling to the F2260. Thanks again for all the information that led to an informed buying decision. Man was yesterday fun! Dan

Hey I have a B7800 I was looking in the northern tool catalog and they have a air compressor that attaches to the pto. Does anyone have this or have seen it? Is it worth it to get or not? Also has anyone added a light bar to their ROPS. I was thinking a small 3 strobe, LED or Rotator. I 'll need...