Search results

So I was in my local TSC in CT yesterday and just about walked into an end cap when I saw the cost of 2.5 gallons of 41% Glyphosate concentrate priced at $129.99. :oops: I normally pay about $50 for the same item there. Fortunately, I still have a jug and do not need another one yet. This may...

Checking in to see if anyone has had a similar issue and/or can offer some guidance. Attempted to place the loader on my Kubota L3901 into the float position, but was unable to due to significant resistance with the joystick. Never has been an issue before. This happened when it was very cold...

There has been an ongoing joke between my dad and I for the last several years about the lifespan of his Kubota battery. He bought his B7500 new over 19 years ago, and never changed the original battery. I changed the battery on my old L2250 3 times in 15 years, and his just kept plugging...

Came across this item at my mom's place and cannot seem to find anyone that can determine what is. Anyone want to take a stab at it? Best guess I had was a stationary nutcracker :confused3:

So I finally took the time to take a stab at revitalizing my old and rusted grader blade. After grinding the rust off, I applied a few coats of primer followed by spraying on two top coats. For my first implement refinish project, I'm fairly satisfied with the results. As I primarily use the...

Starting a rehab paint project on my rear blade and figured while I was at it I would replace the lower link pins. They are loose and the nuts are stuck due to rust. Tried using various lubricants to no avail. I also have no means of heating it up other than a small torch which did not do...

Looking for some feedback on the benefits of adding the telescopic stabilizer kit option to my my Kubota L3901. I already have the Pat's system on the lower arms, so wondering how much of a benefit it would be. There are times when I have to adjust the turnbuckles which can be a bit of a pain...

Guess I have what could be considered a "good" problem.:dance1: When I bought my L3901 last spring, the Kubota dealer was good enough to throw in a gift card to be used at the dealership. It can be used for any purchase or service there and they are also a Napa and Stihl dealer :) I have...

So I thought I would share some info that may be helpful to others cause that's what we do here :thumbsup: Bought my L3901 in in the spring and have been very impressed with it. The only thing that I found troublesome was that it felt "tippy" :eek:on slopes whereas my older L2250 never really...

So this is probably one of those dumb questions, but then again this why this site is so great.:thumbsup: I decided I wanted to add the bucket level indicator to my new Kubota L3901 as I thought it might come in handy. So I put it on the other day without any issues,other than realizing Kubota...

Noticed something that may or may not be of concern in using the PTO on my brand new Kubota L3901, and looking for some feedback(especially from fellow L3901 owners). I have used both my chipper and brush hog with excellent performance overall when the PTO is running the implements. Here is...

So I attempted to hook up my brush hog to my new Kubota L3901 this morning. Knew I would need the PTO extender that I had on my L2250 as the Pat's EZ extended everything 4 inches or so. The extender has a bolt through it that went through the L2250's pto shaft. Problem is the L3901 has no...

So I made the first mod to my brand new L3901. I thought it would be a good idea to cover the deck with a mat to protect it as well as to reduce any potential slippage......plus I thought it would look better:cool: As they do not make any factory mats, I picked up a small stall mat at TSC and...

Please join me in welcoming my new "Bundle of Joy"!!!:cool2: Much planning, research, discussion, and quite a bit of fun went into this decision and process. Although there was a great deal of anticipation in waiting for this day to finally get here, the labor was relatively painless and was...

It has been a difficult decision that I have wrestled with for the last several years, but I ultimately have decided to bid farewell to my 1985 Kubota L2250 :(. She has served me very well over that last 15 years ever since I bought it from the original owner. As it was my first tractor, I did...

I have seen a number of posts that have covered the age-old question of how much you can expect to negotiate off from the MSRP on a new Kubota, which have been helpful. Seems like anywhere between 10-15% is considered a fair to good deal. Geographic location also seems to play a part in the...

I am in the process of replacing both headlamp bulbs on my L2250. Was able to get the old bulbs off the metal housing that is surrounded by a rubber housing that the wires are connected to. I was also able get the new bulbs in the metal housing and the rubber housing back around the metal...

Been thinking about upgrading my manual L2250. Just came close to buying a 2010 L2800 HST with 450 hours, but figured the asking price of $14,500 was a tad high and the seller was not willing to come down. He sold it anyway so it is not an option. That being said, there do not seem to be too...

Thinking about putting my 1987 Kubota L2250 up for sale as I may start looking for something newer with HST. Any help on a fair asking price would be greatly appreciated. It has a loader and is a manual transmission. It has less than 1300 hours and needs nothing. New rubber on front and plenty...

Currently researching 3 point wood chippers and hope to go used if possible. As always, I have found a great deal of info here. After searching for so long in the used market to no avail, I now find myself with two potential units (go figure!) One is a Bear Cat 73454 and the other a Wally...

In the process of researching the 3 point wood chippers that are out there. Finding it difficult to find anything used and when I do, it gets scooped up pretty quick. Primarily looking for something so I can keep the wood line at bay from our pastures and to chip up hardwood branches and limbs...

Looking for some of that guidance we all come to enjoy here on TBN. I am considering the purchase of a ground driven manure spreader in an attempt to keep the byproduct of our two horses in check. I have been looking for awhile at used ones, as the frequency of use does not seem to justify the...

Looking for some feedback on preferences for my next saw purchase. Already have a STIHL MS 290 Farm Boss with an 18 inch bar for the big stuff and love it. Looking to replace a 20 year old Mac 100 Eager Beaver with either a 170 or 180 for limbing. Leaning toward a 16 inch bar vs the 14...

All excited to use my brand new Pronovost Puma 64 snowblower that I bought after last winter(wasn't planning on being unprepared ever again!!) on the 12 inches we got last weekend. To my despair after 10 minutes, the PTO shear bolt gave way and nothing was jammed or obstructed in any way. The...

I tried to find the answer to this problem in other threads as I believe it may be fairly common, but was unsuccessful. I recently purchased the PEC for my L2250 and am now a true believer that the PEC is excellent. The problem I am having is the extra 4 inches or so it pushes the implements...

Looking to see if anyone has had any success with preventing weeds from growing in a gravel driveway. Mine is over 700 feet, so spot-killing is not an option. I just had it redone with processed aggregate, so I cannot place a barrier underneath. Not sure that would work anyway as weeds can...

Just recently bought the Pats Easy Change for my Kubota L2250 after reading so many rave reviews here. I have only hooked up a few implements since the weekend and it already seems as though it will be a HUGE improvement over the aggravation I have experienced over the years. One problem I did...

I've been researching which type of snow blower to mount on my Kubota L2250. The rear wheel width is approx. 59 inches, so I would like to cover that span. I've narrowed the field down to two units and would greatly appreciate any insight from all. It will either be the RAD "Blizzard" B64B or...

Hey guys...my first post, just joined today. Been learning much from those who have posted here. Need some help deciding on a rear mount snowblower for my Kubota L2250. Any and all insight is welcome. Currently looking at buying a new Farm King 60 inch for around 2k and would have to travel...