Search results

The other day rolled over 50 hours on my 7340. Manual states need to replace the hydraulic filter and engine oil and filter at 50 hours. Looking under the tractor, the hydraulic filters are in a totally different location and there appears to be one small one and one large one now. Unfortunately...

Kioti has an OEM grill mesh guard with the RX7340. It inserts into the grill guard that is included with the loader. No drilling, just attach with the 4 included bolts. Not sure the gauge but believe to be around 1/8" maybe 3/16" thick metal. Install took all of 5 minutes. -Craig

Got my OEM hydraulic top link today. First time getting OEM parts and installing them myself. They came very well packaged and individually wrapped and each bagged labeled. Instructions were decent but didn't need to be too extensive for a top link kit. I found the operation to be smooth and...

File this under the work smarter not harder category. Using a jack to position, raise/lower the quick hitch really saves the back and makes it a breeze to install, remove and move around. -Craig

Spring is here, so can start putting the new tractor to work. Getting ready to put down some crabgrass preemergent. Got sprayer late last year as well, only used it once before to make sure it worked. First time using it to put chemical down as well. All went well, most challenging part is...

Did a mod on the storage tray in the loader on the RX7340. Added some felt padding to the inside of the tray to minimize noise and sliding around of items.

Let me post this in the correct forum... This is interesting. Mentions RX and HX only. I'm assuming only the new 40 Series RX. I will get this installed and see what happens with my RX7340. Kioti Connect Announcement -Craig

This is interesting. Mentions RX and HX only. I'm assuming only the new 40 Series RX. I will get this installed and see what happens with my RX7340. Kioti Connect Announcement -Craig oops, posted this in wrong forum. my bad.

Installed a TigerTough seat cover for the tractor today. These are custom fit for your seat. They aren't cheap but are very high quality, American made and have a great unconditional warranty (at least the website says so). One issue I had was installing the back seat portion. It was too tight...

Did some additional mods this afternoon. Found the factory radio to be crap and didn't support handsfree with my phone. Upgraded to a Continental TR7412UB-OR radio. Got radio from tractorradios site because it included the correct wire harness and an additional faceplate if needed. Was a little...

Did a little work on the tractor today. The older 7320 has metal channel iron pieces you put on the cylinders for safety purposes when working under the loader to keep it from crashing down. The 7340 has a lever on one of the hoses that prevents the loader from coming down. My dealer didn't...

Got the backup camera and monitor installed this weekend. It took way longer than I expected, lots of issues. Went with a 9" monitor that supports two 1080P cameras. The new RX7340 has a spot on the back of the roof for a camera and even a fuse that says rear camera (didn't find any cable ran...

Just stumbled across a youtube video of the new 2024 RX7340. As a current RX7320 owner this thing looks like an awesome update. It looks like they took a lot of the new bells and whistles of the HX series and put it in the smaller RX series. Couldn't find any other information on it, but can't...

For future reference if someone else ever has a similar issue. Was having a issue where my CEL light would flash on and off intermittenly. Sometimes it would stay on solid for a few minutes but would then go off. Could turn tractor off and back on and would stay off for awhile again, and then...

Well noticed a puddle on the floor under fuel tank. After closer examination, found the tank has a crack along the seam. Tractor is well in warranty period so sure this will be covered. Will call dealer on Monday. Just a bummer. Tractor is garaged and with mild Missouri weather so far this year...

So I have noticed two things about my RX7320 that want to see if others behave like. First, if in Medium, and switch into reverse there is almost always a slight gear grinding noise when it starts to go in reverse. In Low gear there is no noise when switching into reverse. Anyone else have...

Anyone know what this hole is for and should there be something in it? looks like a great way for dirt to get inside the tractor. -Craig

so was at national farm show this last week and talked to Kioti reps. They mentioned that kioti now has a factory 3rd function kit available. does anyone have this or know more about it? pics would be awesome. thanks craig

Anyone found a online source for the NX Cab Exterior filters? Part number is T5525-84871. Thanks -Craig

I see that MIE is offering a 3rd function kit for the NX Series. Description says it is a complete kit. Has anyone gotten this kit and if so thoughts? See they also sell a much cheaper kit for using rear remotes as well. Thanks KIOTI NX Series Front 3rd Function Kit for sale in Morrice, MI...

So out of the blue, my HST isn't working correctly. Misbehaves with and without linked pedal enabled. When I press the forward pedal, tractor starts moving, sometime slower than it should, then jerks and starts moving faster. Sometimes, no matter how far I push the pedal it will only move at...

So seeing how Spring is about to start and thus mowing, getting tractor ready. I also wanted to provide a update on my issues and resolution with my tractor. Overall I am VERY happy with my Kioti, because of my Dealer. I had no prior experience with my dealer but I lucked into a good one...

Getting ready to trick out my NX6010. Got four 6.5" LED lights to replace factory cab exterior lights. Also adding a front and rear camera. Spent hours researching this. I wanted something that provided a good picture. 90% of all monitor and cameras out there run at 480 lines. Some people...

So while doing some inspections today I noticed my fuel line from the tank was rubbing on the frame and had already removed quite a bit of rubber. I fabricated a metal shield out of air duct sheet metal and zipped tied it on. Think it should work. Poor design by Kioti.

So got into my Cab this weekend and noticed this water damage. Tractor is stored inside, so not from rain or being outdoors. My guess is wiper fluid hose, as the nozzle is right outside or AC drain. To date my issues: two cracked panel around bolts on inside wheel fender well all fuel...

So I noticed a spot under my tractor this afternoon. Checking the spot it was fuel. Spot was right under fuel tank. Tracing the fuel I found it was coming from the top of the fuel tank where the fuel line is connected to the tank. I had put 5 gallons of fuel into tank a bit earlier. This...

So today I was finish mowing and as I mowed it just felt like something was different, the engine sounded a little different and the RPM's were fluctuating a lot more than usual. One thing I noticed is when doing a sharp turn the tractor would start to bog down and RPM's would drop...

So I was using my NX6010 the other day and as I was getting out I noticed some cracks of the interior panels over the left wheel well. The cracks are right around the bolts that hold the panels to the frame. It looks like the winter temperatures caused the plastic to expand/contract and thus...

I've seen where some of you have replaced the factory exterior CAB lights with LED ones. What product have you all gone with? Did you have to custom make a bracket, able to use factory or ones provided by LED lights? Thanks -Craig

Looking at getting that Speeco 3pt log splitter and have a few questions. I have a NX6010 with two rear remotes, one is a detent. 1st. I will want to hook the splitter up to the detent remote correct? 2nd. I've read people having to convert the hydralic valve that comes with the Speeco from...

So after about 18 months of research, comparing and following threads here I pulled the trigger and purchased a NX6010 HST Cab and it was delivered today. Getting delivered was a chore in itself. My dealer had to get it from the Springfield, Mo. area. That tractor had 1 rear remote already...

https://twitter.com/Pimpmylens/status/569776495184506880/photo/1 Very Cool "modified" Kioti. -Craig