Search results

surprised the bx2200 runs it so well. been looking at their 54", and also the bestco heavy duty. i'd be using a bx2380

those of you that have ktac, did you get a copy of your ktac policy with your equipment listed when you purchased? been trying to get a copy of my policy, and been getting the run around. i've contacted both ktac and kubota financing, and both have stated "it's not us, it'd the other one that...

So, ended up with a new loader, with me paying the difference on the price of a new loader today, vs what i paid 4 years ago + my $250 deductible. Still a pretty good chunk of $$, but better than not having it insured at all.

My dealer is like a 2nd or 3rd generation dealer, with about 5 stores in my area, been around forever. I think Moses bought his 1st tractor there.

Appreciate the reply. The claims adjuster didn't say anything about that. Said they would either replace loader, and I'd pay the difference between what i paid and price for a new one. 2nd option would be they'd take what they'll pay for a replacement and pay towards my loan. Then I'd pay, out...

I'm dealing with something similar. After filing a ktac claim, dealer says i need a new loader. Ktac says they MIGHT do a replacement with me paying the difference for a new loader. But what they usually do, is apply what they'd pay for my loader to my loan, and i pay out of my pocket, total...

i know this is an old thread, but wished op had come back. would like to know how ktac handled the situation. had to go back and look at his pics again, damn, that was a mess.

I know this thread started a long time ago, but that's a beautiful tractor.

I know this is a very old thread, but what do you think about the 48" heavy duty Bestco flail? That's the model I'm looking at getting fir my bx2380. Either the heavy duty or next step down. Would you buy it again? Any thing else you can say about it? What did you use to run it? Thanks

I know this is an old thread, but what came of it? Any luck with RK helping to fix it?

Good luck. I went through this trying to replace a full windshield on a rinker boat. Was impossible to find original windshield. State farm ended up totalling the boat out, mainly because original windshield couldn't be replaced. Boat dealership was unable to find it either. Very frustrating.

I'm assuming you sold this. Can i ask you why you sold it, were you happy with results when you used it? What tractor did you use to pull it? This is one of the models I've been looking at.

Good heavy pair of vise grips? Looks like the pin will almost still fit. You're right, things just can't be simple anymore.

if factory financing isn't available, that's definitely the way to go if not paying cash. been a CU member for over 30 years.

Do you all provide any inhouse financing for any of your equipment? I spoke with people at www.navitascredit.com, and they're unable to do any financing for individual consumers, only a business

Thanks for the quick reply

I see the "hohoho" expired a few weeks ago. Any other coupons you'd like to share? Getting ready to order the EA XTreme 48" Compact Rotary Brush Cutter. I have the bx2380, that's the cutter that'll work best with my tractor, correct? what's the lead time on this? thanks

Yes, headlights arr useless if using the fel. I did swap my headlight bulbs for led's. Bx2380. They are much brighter, but only useful if i remove fel.

Is that the one wrapped in blue tape? There is a plug under rear left fender wrapped in blue tape. Every bx I've ever looked at has this. This is a contant power? I bought some lights that have an on/off switch built into the wiring that came with them.

Wouldn't that have been covered under warranty?

Also, not sure what grade my driveway is. It's about 400ft total with about 30ft a pretty steep hill, going from my house up to the road. Steep enough that any 2wd vehicle gets stuck if there's ANY snow. Anyway, my bx2380 will pull my 4ft boxblade, full of gravel, up the hill. In 4lo, locked...

This is an old thread. Op, what did you get?

Wish we were closer

Weird place to be protesting.

Just like the title says, my mower belt has rubbed a spot on these 2 hoses. Obviously, it would only happen when I'm mowing with the deck all the way up, which is rare. But, it does happen. I bought this new last year. My bx1800 that I had for almost 18 years never had this issue. I'm...

Here's mine. 30 gallon barrel with almost 9 60lb bags of cement.

That is a good deal. My 30 gallon barrel took almost 10 60lb bags to fill. I cheated and rented a small cement mixer from Home depot. Made things much easier

I need to have a ditch dug on the side of my property for drainage, and unfortunately, it needs to go through a wooded area. I was thinking a renting the small excavators they rent at home depot. The couple of contractors I've had look at it have all said, due to the roots, those small units...

Finally painted it. Was raining today and i was bored

I figured I'd go ahead and paint it. Turned out pretty good, but i probably went a little overboard. It's roughly 650lbs, almost 10 60lb bags of concrete and some rebar. It's amazing what adding additional weight does for working the tractor.

Brand new bx2380. Has about 15 hours on it. Just removed the fel about a week ago, for the 1st time. Just spent about 1.5 hours trying to get it back on. I'm doing it inside my garage, which is about as level as i can get. The left side will hook up, but the right isn't anywhere close. The more...

Here's mine. Still have a little work to do to it to clean it up how i want it. About 9.5 60lb bags of quickcrete, and this make a **** of a difference on my bx. The chainsaw holder turned out better than i thought. Just wished i lined it up even with the toplink. Now, just clean it up, a...

Finally got it on the tractor and took it for a spin. Still need to pull some tape and clean up the top rim/edge. I liked the way the chainsaw holder came, just wished i had centered it with the toplink. Now, maybe, some orange paint.

Finally got around to my homemade concrete barrel. I started with a 30 gallon barrel and 10 60lb bags of concrete. Had about 4 feet of chicken wire that i wrapped up and set in barrel. I ran drawbar through the wire. Also had 2 2ft pieces of rebar bent in a v, through the holes on the...

Just thought I'd post a couple pics, getting a little dirt on the tires

ok guys, this is a newbie question, so don't kill me. i've never had a loader so i'm just asking the experts. my last tractor, bx1800, when i would mow with the mmm, i would run the rpm wide open. it seem to cut better, and disperse the clippings the farthest. but on my bx2380, and i've seen on...

it was official yesterday, signed everything yesterday morning and my baby was delivered yesterday afternoon. They forgot the grapple(how do you forget a big implement?), and brought that this morning. It's been pouring rain the last couple days, but during a break, i took her out and got a...

No, but it's tasty. They had some sort of promotion and had special labels printed up with the dealer's name on it

What's the expected time frame? I told him on Monday 4/8 that i want to move forward. He ran my credit and was approved 4/9. Said would be ready the following week on 2/15 or 2/16. They had everything except the 3rd function which came in 4/11. Yesterday, without much reason, he says hopefully...

So, say you walked in today and bought a tractor. You tell the salesman you want a new xxxx model, front end loader, mid mount mower, however you want it set up. You go back and forth on numbers and eventually come to terms. You write him a check, sign the loan documents, however you pay for...

Anyone have any experience with one of these? 200lb sub-compact grapple, looks to be very well made. Saw one at a local MF dealership. It was the 1st small one he's ever had. He didn't know much about it. Looks nice, though

i think. i had pretty much decided to go with Barlow's. it came down to the bx2380 or the MF gc1705. i'm getting the front end loader, with QA, 60"mmm, r4 tires, and a 3rd function installed. Barlow's gave me a pretty incredible deal, but he is over 2 hours away. i spent all day yesterday at...

Well, the time is now. Just sold my 17yr old bx1800. 1st guy who came and looked at it loaded it up. Now, I really need to get serious. Been to all the local dealers, and I think I've gotten all their best prices. I think I'm leaning going back with Kubota. I also emailed several dealers from...

Ok, been looking for a new subcompact for 6+ months. Checked out the bx2380, mf1705, and the rk24, all fit with a 3rd function. Also looked at the branson 2510, but that's probably bigger than i need, but ****, the branson is a heavy built tractor. I want to run a small grapple when not using...

These still available?

Looking to finally pull the trigger on a 2380 I've been looking at. It's a 2017 with only 17 hours. It has FEL, 54" belly mower, and running on r4's. I can probably get it for $13,000+ tax. What's really pulling me in, it has a 3rd function already installed by the dealer, and also a 54"...

i'm looking at buying a 2017 bx2380, without a mowing deck. i have an older bx1800 that came with a 54" deck. the model# is RCK54-22BX, serial# is 19366. anyone have any idea if this deck will fit on the bx2380? i know i could ask a dealer, but that's what these forums are for. the bx1800, i...

A buddy of mine just let me know that MF, for 2019, is expanding the gc line with a 1723e. Anyone have any info on this new scut? What's the difference between this and the 1705? It's on their website, on the build my tractor portion, but they don't have any pics or info about tractor itself...

Does Massey team up with any particular mfg for a new grapple set up? Might be pulling them trigger on a new 1705 in the next couple of months, and when I do, plan on getting a small grapple with it. Just wondering what Massey sells along that line. Thanks in advance.

Self explanatory-will be buying a scut within the next 6 months with a fel. Really falling in love with the idea of also buying a small grapple with it. My questions is-when you swap out the bucket with the grapple, are the existing hydraulic connections not enough? Is that what the "3rd...

Love this little tank, it's like the energizer bunny. It just keeps going and going. Now, the bad news. The steering is starting to act funny. I'm constantly have to turn my steering wheel, just to keep tractor straight. Sometimes, not all the times, I will have to turn it 360 just to keep...

I'm trying to respond to someone selling a tractor. I input all the info(my name, phone #, and email addy) and type out my message. When i hit send, a red lettered message pops up, saying i need to input the proper code. Wtf? I've tried it several times, and same thing happens every time...

I'm trying to respond to someone selling a tractor. I input all the info(my name, phone #, and email addy) and type out my message. When i hit send, a red lettered message pops up, saying i need to input the proper code. Wtf? I've tried it several times, and same thing happens every time. What...

hey guys, love these forums. they are so full of info, it's amazing. i was having trouble starting my bx, and almost bought a new starter. But found a sugestion by "KUBMECH"(buying/installing a $30.00 J.D. relay switch), and it starts better than new. saved me LOTS of $$$. i've been having a...

let's see if i figured this bx1800picture out

can\'t post a picture i can't seem to post a picture with my post. it says the attachment is to large. how do i do it?

just wanted to let everyone know, my new toy arrived friday as planned. haven't been able to do much yet except ride around and get a little mud on it. won't be long, though, and i'll be mowing up a storm. bought my 1800 with 54" deck for 9500. at jacobi's in southern indiana. great people!!!

finally broke down today and bought me a bx1800. paid 9900 with a 54 inch deck. i know it's kinda high, but he wouldn't budge, and i love the bx. just wanted to let every know and this is one hell of a site. should take delivery on it maybe as soon as friday afternoon. i'll take pics and keep...

i was sold on the bx1800 untill i saw the jd2210 today. the jd was priced at 10500 for rig and 54' mmm and the bx is 9995 for same set-up. what's people's opinion?

i received a price on a 2210 today of 10500. for the rig and a 54' mmm. how does that sound. also, i was sold on the kubota bx1800 until i saw this. how do these two compare? the bx was priced at 9995. for the same set-up.