Search results

just bought new set fronts. It’s been around 8yrs and 1400+hrs, no issues to date.

Power Wagon handling its chores

My son got his first buck he sure was excited,well we both was lol.

My boy dropped his first buck @ 215yrds,that 6.5 Grendel getting it done. You can tell he has confidence with his shot placement with this rifle,not worried one bit about pulling trigger and the recoil. Both deer he has shot dropped in its tracks,talking done. I was skeptical at first,didn’t...

My boys new gun dog German Shorthair pointer. Him and her just got the BB gun out for now hunting

Well we switched up from deer,broke the shotguns out and got few ducks this morning...

Well my boy got it done this weekend with the new 6.5,perfect shot at 100yrds.

Well my boy got it done with his new rifle this morning. CZ American 6.5 Grendel

Finally got the stuff (well right stuff lol)and mounted the scope. Just sited it in and waiting for son to get home from school for him to shoot it.

Thanks man it is a lot nicer than my old 3x9-40 Nikon,I can see some of it has to do with turning 40 also lol I know it’s not a gun but also picked this up to help us get to are Gun Time lol.Brand new 2019 Polaris 450 deal was to good to pass up since my 2006 4wheeler is getting tired.:D

Got my scope on and bore sited,have to dial her in tomorrow. Picked up my sons 6.5 and was going to put the scope on but had ordered wrong rings but got the right ones ordered maybe here by Saturday.

2 down last night but barely knocking a dent in these dang hogs. They have tore up so much pasture over the years it’s ridiculous.

Power Wagon 12k winch sure come in handy every year about this time we tackle mowing what can get to in the bottom

I bought mine from a guy that used it commercially,he was going from 60 to a 72,it had been well taking care of a 2016 model with like 230hrs. Paid like $5000 less then same new,I have put around 20hrs on it ,I did have to replace the ignition switch and battery. I added the Z-glides and few...

I stopped and looked at the Ruger 350 legend yesterday. With $140 scope the gun is $700 out the door. thats it’s bullet compared to the 7mm-08. I haven’t decided yet I did let him shoot a 6.5 Creedmoor and 6.5 Grendel and he liked the Grendel

We have a 6.5 Creedmoor but it’s not going to work to well in deer stand lol. He will shoot it all day,has barely any recoil. Just wont something don’t mind getting scratched.

Even thou we hadn’t had any rain the father n law managed get the tractor stuck in bottom last month but the Power Wagon winched it out once hooked another truck up for anchor.

I’ll post some deer pics anyways since you started up thread lol

We shoot out to 800yrds at the place could prolly go 1000 haven’t ever tried it thou. Here is my boy just looking no we did not shoot from inside,was just looking lol.

Just purchased my 2nd set of 11.2x24s,been running since new 2012. To much running the highways and one wouldn’t stay up,they was around $250pc.,radials 3 times the cost. Tractor has 1400hrs

Power Wagon didn’t do to bad.

my parents neighbor happened month or so ago. They brought in trackhoe to pull them all out lol. I have seen more but just didn't get pic lol

Buddy of mines current situation that lives few hrs from me,they have got a backhoe stuck now trying to get it out lol

Looking at getting another tractor and run across a 2014 cab 3540hst with 332hrs,just looking for any info. from folks who own them. Thanks

just got me and the wife new Rams. Mines the Power Wagon more for the towing it's the 6.4 Hemi. Traded the 2011 Ram in had 59,000 miles on the Cummins was still new gave me a lot for it,don't tow near as much anymore didn't need the dually.

We been putting the hrs on them everyday.

well we went bought new bikes yesterday.

I just had my first one in the coop in 5yrs,he didn't make it. If I wouldn't have, I would have been on egg duty from now on

rain sure helped the rye grass take off at the new place.

Well I got it some what smooth and the roots picked up It got dark by the time done the last pass while threw out rye grass and rolled it in. Be another week before head back and set the meter pole,so power company can get to work. Purchasing the grapple last year was one the best investment I...

Well went out to see the progress.

Ha! I'm only good for one a year.:D

I have only heard of them never any experience with. Brandi(Bindian) I believe has got some stuff from them, and she just posted

I built mine with just stuff found in shed,I couldn't tell you what that bracket was originally for. I could have cut the one side off but this was just put together one evening when I got tired of the monitor laying where ever could get it to set and never could get it to set still. Anyways...

I don't know of any disease:laughing:

I'm sure they washed it and doesn't look like mine but you can see about the regular greasing what it leaves,even if they grease it freshly when you work the loader it will been seen. Yes I know it's time for me too grease mine:D. You can see what my fenders look like,it's has almost 1,000hrs

I would be more worried about getting junk mail from somebody wonting to sale me something if got my address on here,anything shady can come meet Smith&Wesson:D

yeah I see LA 724

Newbury we have a great dealer here also and deliver all over Texas,maybe out state never asked just been there when getting tractors ready to ship out. Kenneth is my salesman great guy,also goes church with my wife's grandparents.

These are roll cage brackets he could weld this on instead of that other pipe.

I can't recall the brand but looks like this one.

Yeah my current 42" Sanyo flat-screen is 8yrs old and works fine,my sons t.v is the one a toy went flying into and it's mounted up on the wall. Son said was his little cousin,stuff happens and either way I'm going have to replace it,might as well get me a new living room t.v,and him take the...

sorry took so long,waited bring to house for horse's. I got 4 of those green ones from TSC and they seem sturdy,pretty heavy,they cost to much pick up with the tractor so handle them by hand and they all there.

I'm running the Cooper HT3 on my dually now.Not much difference in the all-Terrans to the highway few little grooves not much good in the off-road area. I run the Firestone Tforce ATs last and don't recommend them...

Seen this fellow while putting in food plots for a buddy. Let him cross road and do his thing...

mine doesn't have a loader but I like the way the 2wd rides over my 4wds. Not really fair comparison cause the frame is longer,25 more HP and it weighs about 3,000 more. If I had one tractor with loader I would have to pick the 4wd around 80hp. Just haying and loading hay etc. 2wd will be fine...

I have the same setup but in Black. 2011 with 43,000miles

That's them in my food plots and the second was this evening looks like the field fence is keeping some out. I could have put an arrow in one those pretty easy,they lucky wasn't my side.

I would burn it where it sets,we actually burn in the draw heading towards the pond every year. We take all the dead trees/limbs from the pasture all year,safest place for us to burn. Hasn't harmed fishing never any kills,the big burnt trees will end up under water if get a lot of rain and will...

The Kubota 108s weighs 8576lbs,the 9960 is 6610,both 4wd cab models by tractordata.My neighbor has a BH 20ft and it is big and heavy,pulls it with NH TS135.Both make my NH TL100 and 15ft look small,setting side by side. What 20ft are you looking at? Weight is an issue when get into mowers that...

my septic line trail about the only green around right now,lol

We almost got some rain yesterday that's a start:laughing: My yard and pastures looking pretty pittyfull

I have used my pallet forks before(when had one or two to load,didnt wont to change to spear) just set them as wide apart as they go and stick just the one side into the middle towards top some of the bale. I rarely use my pallet forks now that I have a double hay spear it gets used for both...

I find the GN a lot easier to back up and into places. Most the length of GN well is over in your bed so total yes it longer off the truck but not much on it. I find pulling the GN is way less stressful than the bumper pull,they just pull so much better loaded. Heck keep the Bp you got and get...

$2800 and you can fix the power and mpg problems. Been on the lot for awhile by the sounds if it,should get them come down on price.

I haven't really paid attention to the recall but the wife looked it up and guess my truck is going to fall under it. I had the ball-joint one done but not the tie rid ends or connector issue last I got in the mail a fix for it wasn't available yet. Anyways going to be curious what they offer me...

When pulling the load of hay I never seen over 1100 but it wasn't really pushing it cause only 12rolls,barely breaking a sweat. Thanks for the numbers,I also need to study up on the others,the whole thing about get where I can watch is to make sure everything is going good but need to know what...

I need to learn more about the settings cause those max numbers where set I thought but they change like it's the max the truck has seen at one time,I dunno need to study up. They are suppose to come out with a trans tune sometime

A buddy of mine was behind on getting a place done down the road so called for some help. Long story short the land owner had been put off for a month getting baled so I got my friend to do it for him,it turned out to be a pain,it was Tifton 85 that was heavy fertilized and 30 days over due. The...

I'm currently running a 2011 cummins,just curious what brand you are running and/or any suggestions. My plans currently is to get the EDGE CTS programmer and remove the DPF/muffler and install a FLO PRO. I'm not about the straight sound,just looking to gain on MPG and Pulling,not anoy the...

I like it,it does good for me pulling 15ft batwing and RND baler. It's comfortable,rides smooth across the pasture. . It's heavy would say around 12,000lbs. Should you be looking for like a TS135a,something in that category?

There are two adjustable rollers the one on very top and one on top the back gate. Hope these help

They have a 4.105 looked at in Crockett was nice didn't get price but out of the three mentioned I would have to go with that 95c just like the interior over all the rest. That 6115D is in the mid 60's? I looked at the 6105D back when I was tractor shopping but for what I could have got for the...

Brandi wasn't bad parts it was the lack of parts on it from the start. Finally got my first cutting done on everything 383 rolls. My brothers 8acres made 31-1/2 not to shabby

Yep I had to break down and buy one last year. I have moved on to my lease place,started baling when I got off and have some to go have made 75rolls so far. It is producing pretty good,heck of some windrows A/C belt was loose had to run without it on almost the whole 75rolls,drove tractor no...

Just few pics of why I even do all of it. And the guys that make it all happen this composite bulls first calves will start dropping in october,raised him from 5mnths,son named him SI

What distance did you go between t-post? Here is pic of mine

We done some mowing on cattle pastures yesterday had the 12ft and 15ft going.

So held off few days ago cause chance rain today and you guess it barely a sprinkle for a minute. We did get some cattle pastures cleaned up and I will spray them in a week or so for weeds and hoppers. Cat fever the landowner covered the wrecker bill. Since I started haying I have been threw...

Well went and looked at two balers the JD 469 and the NH 460 priced out the same $38500 with net. Off subject I also seen this that caught my eye Mahindra ,just looked no price:laughing:

A buddy of mine is a custom baler just sent this he was cutting

I finished up baled 90 rolls today,had to clean that roller out twice but all else went well.

Alright so I finally got pictures what I'm dealing with. The place where grass is in roller is where the bearing went out.

it has been raining for last 30min and not done...

my 7040 with the 8ft LP(RCR3596) covered tracks,pulled no problem. sold the 8ft and went to 15ft LP,no regrets I think does a good job pulling it. I did just get a sweet deal on a TL100 and that is going to do the shredding and baling. I will still use one of the 7040's to pull the 12ft if need...

Took a few pics after the storm

So I guess when the tree are falling over it's not time to cut.

I think this means it's to wet

Well I just thought would stop across the road and get a pic of the neighbors NH with mine,boy does it make it look little:laughing:

Thanks Brandi,have come along ways since a old ford 2000 and Belarus 805,over the yrs.

My new to me (04)TL100

I think I weight somewhere around 8000 lbs(on Kubota)with fluid in tires and loader on. I just bought the NH TL100(weight on it closer to 11,000lbs with front weights)to do the mowing and pull baler. I mow the front yard all the time with mine does nice job.

There is a lot of black around here,they do stay in the ponds thou. But yeah the Brangus are little harder to me than the angus. I don't think they are near as pickey either eating older hay. I have black/red/motley/smokey/baldies/tiger strip and full Charolais just aslong as it's a good mother...

Brandi it turned out kinda dark,the bottom fell out sky,right as got a pic.

Well I got it home,I think they done good job.

got the yard mowed and fertilizer out on hay meadow ready for the rain...

So usually would be posting a picture where I had the equipment out and made my first bale but it's just been way to wet. I have RYE grass in one pasture that is over knee high but not getting a tractor in there anytime soon and rain coming back in next week. I ordered fertilizer for the...

Wasn't me but I did help him get out. Took a backhoe and 100hp 4wd JD,to get it out.

I had a 20x40 built cost was $2400 total. Things I would do different make it a little deeper maybe 24' and a free span on at least one side instead the 4 post cause I can't get a few pieces of equipment between the post. I did build a smaller 20x20 with one side 12' wide but I wish had done it...

Sell both buy new bigger,that usually helps:D We have the diesel 60"

I bid on some pipe and got it then ended up having to take these concrete stops too any creative ideas for them?

We had this show up at the dodge place in Fairfield,had take family go watch.

I guess they just kept on,they had two 4wd 80+Hp JohnDeeres tractor trying get it out other day. I finished my parents driveway before this next rain Also had new calf today

I had go help a guy out today took a backhoe and 100hp John Deere get him out

Woven wire and field fence same

I just got them in today,may have go walk around lot

Brandi I added couple blue pieces equipment also. I also got a 2004 NH TL100 cab tractor I will get pics when comes back from getting new PTO clutch

We got alittle snow also

I am currently looking at a 2004 TL100 and the question I have is the owner talks about the PTO slips sometimes and I am wondering if this is a deal breaker. I am just curious since don't know a lot about this tractor what am I looking at to stop the issue. Any opinion on what I am looking at...

I'm thinking about getting a tandom 32', hit me up about April. Mine currently is a 14k-25ft it's 3yrs old.

I like my single lid but then again I haven't ever used a double. I waited way to long before I purchased mine last year,it's crazy handy. I make quick work cleaning up after the fence line cleaners.

Sorry pics are turned like that,I'm on my IPhone can't get them turned. I don't know why they come out like that from my photos anyways

I bought the LP Plainsman back in august for $11,900. I have had good luck with LP and that's why I decided to stay with them. It's a solid cutter,love the smooth deck.

Yeah the 11.2's are what I'm still running I have around 900hrs on them.

Well I think I'm ready to open in the morning. Haven't got to set in the stand one time yet. Been working late,didn't get all the stuff for inside,should show up Monday,well wish us luck and I will do the same for the hunters in the morning...

Just around the corner now . It has been an adventure no doubt but I think all will be worth it.

You are correct every 100hrs,not to worried about the tire thing.

That's some was just mowing the other day,your not going to be running fast but in 2low the 7040 will pull it threw it NP.

Well that's the front showroom area and this is where feed is threw the new double door in case wondering where everything was going

We got alittle over 2inches in a short time. I should have the feed store open Nov.1st,had to remodel the inside and learn how to carpenter in a short time but it's almost done. Couple before pictures and here is some after

same here

I got another 47 bales done,maybe 15acres left to be done for the season,I am ready. Been catching up on the shredding and picked up couple paying jobs close to house.

That's True!

Sorry about pictures being sideways and upside down,it's me and this new phone. I have it figured out now,some what...

oh 7040 pulled it like a champ 4.5mph.

I guess it worked,that's crazy have to do that.

Thanks! I switched over to shredding some cattle pastures for now since the rain chances,maybe start to try and get finished up with the haying for year end of next week. I sold my 8ft LandPride,been using the 12ft WOODs but just bought a 15ft LandPride ,maybe pick it up today. I can not...

Well finally broke down and sold my 8ft Land Pride shredder and bought a 15ft Land Pride today,will pick it up later week when get off.

Got it all delivered couple miles from field. $42 a bale what charged...

How about those cattle prices,it's makes it hard keep ahold of my heifers.

got it all done and delivered,the 20acres made 123(5x4s)

should get it all baled today and delivered to buyer

I have been busy got a lot of hay sold just haven't been able get it layed down,with rain chances in forecast but started back on it today.

Dang it now they are all sideways,sorry guys. I baled 15acres today,at 60rolls so far...

The first break was caused by the net wrap,it and the hay balled up on roller,the last belt broke at splice. I get just a couple off on one side but it's not bad usually do pretty good at getting them level.That's first question he asked if I was over sizing them,I measured them they are under...

Well got most of it up today 63bales so far,maybe another 25 left.

should be able to start using it about Monday. I'm getting the baler belts back on today,along with new front rake wheels and flip blades with new bolts,be back in business...

well things went south,didn't get done and now it's raining

It will get them looking for sure,lol.

finally got it all done. 33acres made 68rolls

50rolls finish rest tomorrow,clover don't wonna dry out.

If I hear of any Tx Jim will let you know. Rye and clover done okay around here,getting dry thou.

So I got everything drug out and going over it all. Desided to go ahead and cut the front yard and bale,getting everything going to start thursday on the big fields. It made a biggen:laughing:

This is from yesterday's little storm,could DL pics yesterday

Nothing better than a half price sale:laughing:

Sure is nice,let me tell you:D No more that throwing on trailer and hauling to brush pile and unloading. I have even been clearing the yaupons out behind the house,just gotta grab them and pull out of ground. Great 1800 dollar investment... I been working on my pens also,trying get them...

I wish would have got this long time ago,been nice cleaning up after hands clearing fence-lines. My niece got reserve with her lamb this year at county. Not bad first year grand second reserve and she's only 9 but works hard. I desided this year to help a friend of mines son and donate him a...

Its a 60in. By Armstrong Ag

Well I desided on one finally,just got it in.

My boy turns 5 Monday(17th) but party is Saturday. I need help on what brand/size to get him,does anyone have the smaller 50 to 90cc,that can shed some light on them? I am kinda torn between Can-am/Artic Cat/Kawasaki/Polaris looking more towards the 90,he does drive my 650 with me on it,so he...

I plan on keeping them to start other herd eventually,they will get there. I have been been keeping only the best for 3 yrs and buying a select few heifers,some of those dropping calves now and some just put with bull. Some of them heifers replaced,the old cows sold off. Been trying to get my...

the little ding,is either from my boys or wal-mart:D but I am having it removed,said wasn't deep enough could get it out.

I would take 40(that's trade-in value) and my miles just alittle less than that but its loaded.

I'LL sell you mine 2011 with 28,600miles:D

school don't start til 10 so we out playing

I use Oregen Grown rye

I got to spend sometime on my brothers new 8560,just raking hay but its a smooth, comfortable tractor to run.Pulling it can tell it has some weight to it and the loader is stout. I hope to get to pull my baler with it this year and see how it does. The m-force 100 for the price is also looking...

Can always get the disc now and after awhile you will have the stumps and everything cleared and get the tiller later. I will still use my disc when planting areas just cleaned up with dozer, the tiller is pretty tough but just not worth the chance tearing it up,until I know the area is good...

The pins have a small pin that goes threw it and into a slotted hole right? I have done a lot of pushing dirt,brush,hay bales and never had a pin come out several hundred hours of rough work,hate to hear that you have messed up your frame and only had it a short time... Insurance will cover it...

The first two is what the 4wheelers looks like and the other is side by side,had thought both looked like regular title sorry

Weather has been so nice I started on my cattle pens again,finally got the outsides done,now for the interior lay-out.

Mathews Craze. I bought the wife one last year,it is short and smooth. I like it better than my Bowtech Sniper,she shot it couple times at first then quit,so I have taken it over,glad I didn't buy her pink:D. Think its good bow for begineer and seasoned. I didn't read all the post before I...

I have the same drag Brandi. ArmstrongAg 12ft $900,I think it was 3yrs ago.

can anyone guess who my little man is for halloween?

I have a drag that pull behind mower to help keep the pastures smooth.

I think would be happier with the 10ft,you have plenty of tractor for it and it sticks outside the tires more,look like you got something back there. . That's a 12ft WOODS and the 8ft LP,the 10 would be just right. 8 just clears tires and 12 just to wide for a flat deck unless have nice flat...

I had 8grand left last year in farm money but put it on wifes new dodge,will be looking for a used one next year. Here is a picture of my cutter to get an idea how unlevel it sets. And the one side that's the lowest my 3pt won't evn go that low.

its in texas but good price

,the R.O.W I disced yesterday got over 2inches of rain so just started on the hay meadow

that's total for now..

Started discing and got a big down pour,on hold for now...

I run two Kubota 7040's,need a third during hay season borrow my brother Mahindra

I found the pics my old 5040 with 15ftThat my 7040 before new tires came in,was brand new then

I use to run one behind my 50hp kubota(kubota 5040 vrs 15ft batwing)(I think that was the thread) and have done it with my 7040 once until blew a center gearbox and hard to find one for a 1979 model. I would put one behind my 7040,no problem. If ever needed,just don't take full width cut or...

I been trying to talk my wife into letting me get a M100gx for a year but it is alittle more needed,pretty hard to get that over on her,lol. Plus its 56grand without a loader and the 9960 with loader only 51.

I stopped and got you a few pics of the 108

I left the trailer and just threw the 2tons in back.

I went and done some food plots for a co-worker at deer lease about 10miles from house.

Load the rears and widen the stance some...

The Mahindra could probably get alittle more HP and alot more weight. Guessing going with 4x4 and loader grapple? All mentioned are good tractors but neither going to be new long cleaning up brush,sticks going places they shouldnt,etc. I bought a small dozer couple years back,its not the best...

He will hold it sometime but couldn't get him to this morning. The ponds are really low right now but moss hasn't been to bad.

My 4yr old starts school tomorrow,daddys right hand man,going to be gone during the day now when I'm off..:thumbdown: So we went fishing this morning

Now that's a hay hauler,trooper.. I almost don't won't to show my little load,compared to others. I need a bigger trailer

We suprised my son with a trip to try and meet his favorite folks

I got the 0-turn cause I mow the parents place and they have several trees,its around 2miles to get there,. Mine I just use it to get up around house then mow the rest with,so I also agree on open areas it will smoke the zero turn:D

Finally with alittle down time,after a year I changed my sprayer gauge so I can read the psi better from cab. The gauge it came with in first picture is 0-300 and my new one is 0-100,spraying the hay meadows and pasture usually running 30 to 60psi anyways....

You gonna have to fix them ruts? This is what looked like last week cutting but we did just get 2in

Its just a chicken snake but it still scared me enough to shoot first and see what kind later while out fishing. 3 copperheads for the year,haven't seen any rattlers yet.

The cost is 900 for the two fronts with rims and the ride is way better. I also have it widened out 6in. Front and back and the rears loaded,doesn't feel tippy at all been threwalot with it,now the stock one will scare you,after been in the new one trying the same stuff.

I have R1's