Search results

Of all things, you would expect a seat belt to work flawlessly. I am beyond livid. Today I laid my BX25 on it's side, a slow plop over and I could NOT get the seat belt buckle to release. I am SO MAD. It simply would not unbuckle. After several minutes I was able to get enough of my bodys...

So I see there are 3 unused holes for mini fuses in my fuse box on my BX25. I want to add circuits utilizing these future holes. Can someone clue me in as to exactly what kind of connector I need to buy (and where*) and once I have it w/ a wire attached, how do I install it, will I simply...

Guys I know there is a lot of incredible talent in the TBN welding section. I perhaps should have posted up what I am doing here but gray matter does what it does sometimes. If any of ya'll want to interject, yea or nea or laugh or praise I invite you to CLICK HERE and give me your opinions.

Well, a new piece of property and some new challenges. SNOW! ...and how to get rid of the stuff! Well, I have another crazy idea and hook or crook I am going to do it. I should have the ability to plow AND use my bucket to move snow when done, meaning w/ the grapple down I plow, with the...

VERY upset I am at the quality of the tires on my BX25. I think I was one of the first to grab one of these jewels about 5 years ago or so now. I looked at the rear tires a couple of days ago and saw significant cracking / crazing just out from the bead about 2" or so. Makes me MAD. On...

Lots of posts on "What should I buy?". What I would like to hear is "What were you displeased with and what do you wish you had bought?" Yes I am shopping serious for a PHD for a BX25. Los Angeles area, OR, Spokane/CDA area.

My BX25 w/ custom roll cage might not fit in a shipping container. I am shopping for a pair of cheap rear rims I can swap on just to load into a container. Send pics and price and whereabouts to my email = CLICK HERE I am in the Los Angeles area

You saw it on TBN first! CLICK HERE Air-Rops (CPD) corporate video (English) - YouTube

Hello all, I am looking for a rubber timing hole plug for a 192CID engine. Possible P/N of EAF-6087-A Any ideas where to look for one? TIA!

I am shopping for a spare rear and front wheel assembly for my BX25. et e now what you have...

Does anyone have a line on slewing rings? Preferably use or old. Inexpensiveis th key here. Maybe 12" OD. No gears needed...

Guys I am making another widget and it uses hydraulics and I need to size some cylinders. I am going to stick to just one to start with. The force required to lift will be the greatest when the boom is at a right angle to the ground yes? also, Is the following correct;

Guys does anyone have any engineering savvy and can you suggest to me how much weight this " cantilevered " (?) 2" solid bar will hold w/o bending? FWIW, the solid bar is actually 61"long, it slips into another tube on the left. Bonus points if you can link me to an online calculator so I can...

Guys I have searched till I am blue in the face and thought I would ask the pros... I am making a log grapple and I need some bushings. I would do well with some hydraulic cylinder crosstubes that are; 1- Predrilled w/ zert threads. 2- I need SHORT, I can find these down to 2.5" long. I...

Hey folks... I have a log splitter and due to a poor horizontal wedge design ( I do believe) , when the 5.5" Bore X 2" Rod Cylinder @3000PSI pushes, it was/is causing the push block to LIFT as the round encounters the horizontal part of the wedge assembly. The push block has 1/2" thick...

:thumbsup: I am not sure what to label this, a BX25D or a BX70. I see a different seat, what do you wanna bet it works better than the BX25 seat, which I dislike. We shall see eventually. The seat has a higher back and arm rests. I also see a bolt on toolbox deal. I see a BH adjustable...

Gents might I get some opinions on the value one would say is a fair price for a 2002 KUBOTA BX2200 ? It has been carport stored, has 100.6 hours on it, it has a Kubota FEL #211. It is in great shape and includes the 3 point hitch assembly. TIA!

I Need a 16" Rim X 6.5" Wide X 8 Lug X 6.5" Pattern X All White (No Stripes) X Holes (Not Triangles) for my trailer for a spare. Anyone have a link? The key here is the 6.5" wide, NOT 6" wide... TIA!

DO you have a BX25 and are you running a flail? I sure would like your input if so, what flavor etc your runnin' and would you buy it again kinda thing... I have a job where I need to knock down and mulch several acres of brush, mostly 1" thick or so and under stuff. I am close to Gearmore...

Does anyone have a link for 3 Way Tipping Trailer Hinges? The ball and socket variety? TIA!

That's what I said, "For Free?" and sure enough... I chose AutoCad Inventor Professional at this link and HomeSchool and I am currently doing the DL. It is like just under EIGHT Gigabites so make sure you have room on your hard drive and your fast enough to run it. Watch the movie on the first...

So, I need to figure out how to calc a hydraulic cylinder for a dump trailer and all the angles so it works. This thing is about 8' or so long and about 3-4' wide. The blue is the moving tilting dump bed. The lower white is the fixed trailer bottom. The magenta color represents a cylinder...

"IF" a guy wanted a Sickle Bar Cutter, is there a rule of thumb one might wish to employ sizing it? Maybe something like 1 Foot of Sickle Bar length for every 5HP etc???????

Gents can I get some opinions please on the value of these New Holland units please? Let's assume they are ready to work and no issues.

Do YOU have a flail mower on your BX25? If so what model did you buy and would you buy the same size flail again? Are you under powered? What size is your flail as well...please. ?

Anyone have any plans to build a dump hoist, or a place that sells them cheap? CAD is A-OK

This is a SAD day when a contractor can not find a normal fitting, well... McMaster has it if I want to pay south of 50 bux for it... 3/4" x 3/4" x 1" Brass Tee (Bullhead) I have been buying HERE but they do not reply to emails.

I know little about hydraulics. The BX25 is a lil pit bull but the FEL lift acts more like a poodle. I know I can bump up the pressure but would it not be wiser to simply make larger cylinders that fit in that holes made to OE dimensions? The OD of the BX25 FEL Lift cylinders, (the bore?) is...

I am considering adding spacers to the wheelbase. When I do it the tendancy for the rear to throw yuck on me looks great. Anyone have any good ideas for some add on maybe rubber fender extensions? I remember seeing a thread where a guy built some sweet front wheel fenders...I need to find...

I rarely use glue's and I am so not "up" on what is available now-a-days. I want to glue a light gauge piece of sheet metal, steel, to the top of my Kubota 1133 ABS Canopy. Maybe a round piece 12" in diameter. So I need to adhere sheet metal to this canopy plastic and I am pretty sure it is...

Well, I REALLY enjoy renewing equipment. Recently I picked up a Generator Trailer from Camp Pendleton and I have been vasilating back and forth as to what I will do with it. I think I am going to make a log trailer / multi use unit. I was surfin' CL two days ago and came across an Auto...

Folks can anyone guide me to replacement teeth for my BX25? I can find OE teeth easy enough, what I am looking for are the Tiger tooth style and Flanged style and basacilly anything other than stock a guy might want to use. OR, is there an adaptor that bolts and uses a roll pin type of deal...

It seems like the more I read about Quick Hitches the more confusing things get. Chaotic at best is the info I have run into. I need to save cash and after looking at the QH's for sale and assuming that many of the inexpensive models look to be the same as the HF I went w/ it. I pull it out...

I want to buy the perfect nice supple connectors to connect to the auxilary wiring at the rear of the BX25. Does anyone know how to call out those parts exactly? A little harness would be great any such animal?

Gents does anyone know of an off the shelf bolt on adaptor to spread the lower connections on my Gearmore AS Series tiller to the span of a quick hitch? I guess I can weld on some ears and do whats necessary but....thought I would ask. Here is what I have.

So this shaft has me a bit stumped...I would expect the safety shield would twist and turn and move out of the way so you can access the push button release but dang if I see how it works. Any input? I think I found the mfg in Spain and I wrote asking for a manual...I am not holding my breath...

Folks can I get some real world opinions please as to what this tractor should sell for in this current climate please? It is believed to be a LB 1914 Kioti , I would guess the FEL is aftermarket for it is a different color. It comes with NO TILLER on the back. It is believed to have 800 hours...

The BX25 Full Cage is winding down, time to look ahead. I am wanting a Disc Harrow so I went shoppin' and found a barely used Leinbach B245-20-18 for $400.00 . It still has paint on the discs, the worst wear is from rain... It is too big for a BX25, butsomehowever, I look at it and see it is a...

You know, this shipping cost thing is WAYyyyyy out of hand. :thumbdown: I just went to messicks and they wanted almost $16.00 to ship a silly WSM for a BX25. Well, I say to myself, ... maybe I will call and get someone to slip it in a padded envelope and go USPS since UPS DESTROYS and charges so...

I might want a set of 4 or maybe just 2, front and back is what I would like to stumble upon for spares and for a song! If I found a full set of Turfs or Ags I might want them, if I found 1 Each of the R4's (I have them OE) I might want one front and one back or maybe ??? Shopping for a bragain...

I am not sure if I am looking at the 16-20 or 16-18 #B245 Leinbach unit yet, no matter it is a little big for a BX25. It may not be too big if I cut 8 discs off it, 2 off each end. Do you own one, does it look feasable? The price is right so that is not an issue. The issue is can it be done easy...

Not being savvy, yet, to flail mowers and tillers I have a question(s). Bonus points if you are a Fireman or VERY well versed in Wildland FireFighting. I have a BX25, a small pit bull, manuverable and nimble and will go all day long on a tank of fuel+ . I can hang any implement or combination...

If you own a Kubota; M4800SU-F, M4800SUD-F M4900 , M4900DT, M4900SU, M4900SUDT M5640SU, M5640SUD M5700, M5700DT, M5700DTM,M5700HD then I sure could use some help, if you please. I need some pictures of your alternator +. If you could, please CLICK HERE and duplicate the photos I took...

What I do not know about electricity will fill volumns and volumns. Frankly, I am absolutely horrible at it. I just don't savvy...sad it is. Are there any 12Volt guys here w/ a BX25 interested in getting more electrical power out of their BX25 (or) that can advise me? I have been thinking...

Welders can I ask about this machine. Is it good bad ugly awesome or trash? I need to look up spec's I guess, I will be needin' it to plug into 220 Single Phase. I have 3 Millers w/ the biggest a VINTAGE machine, I so want to learn TIG. Thanx in advance for your comments...

Any full time fabricators here? Gents I need to weld a 1-3/4" x .120 wall tube to a 3" x 3" x .25 wall Square. The tube sits 7* off perpendicular . It is for a roll bar for a tractor. External gussets, well, maybe 3 at wierd angles. I want a very strong connection, not being a "pro" cage...

Can I ask the pros what a proper size is for a plug weld? .375? .500? This is a .250 thick plate about 4"x3" and I drew in 4- .500" holes. I will be marrying this to a similar solid plate below.

Off topic? No way! I need to eat to have the strength to run my tractor! ;) Gosh I so enjoy corn on the cob but here alls we get is crummy small ears, white corn w/ pueknee little kernels, prob meant for animals. If you grow nice big sweet YELLOW corn I would love to buy some! I do not...

I really want some front AND rear trailer hitch receivers for my BX25. Bolt on units. May I ask who bought what and what would you change if you could? Pictures are most appreciated, Thank YOU!

So I need to build a corral for a very small animal and we have pretty much decided to do it w/ 3" Diameter wood poles, perhaps from HomeDepot. I am wondering if anyone can enlighten me as to what is the best tenon cutter to buy and should I go 2" or 1.5" diameter of the tenon. The tenon...

I am adding a trailer receiver for a 9000# NorthernTool special winch, currently $349.00 w/ FREE shipping. Now I know, I know, it is a pile from China but this is not like my wifes FJ Cruiser where should we need it, it could be a life threatening thing. There I went WARN. This is just to drag...

Gents I am curious as to weather or not this is a good deal+. I have never heard a bad word about Subaru small engines. HERE is a 7HP Subaru engine w/ a Full Two Year Warranty, I think Honda is one year, yes? WOW, 2 year warranty? Sounds good to me... $350.00 bux includes shipping... I...

Gents I want to buy a machine that will quickly and easily put an edge on my blades. The blades are quite simple and the manufacturer calls for a 45 Degree Angle on the blades. I would like a machine where I can simply bolt them down and do the pass's as required and end up w/ a sharp blade. I...

Has anyone built a cage for their BX25? Doesn't look too awfully hard. Perhaps build off the Canopy Frame (#1133) and or customize...Sure would be a nice piece of mind... Perhaps make it so it is easy to remove as well...

"As iron sharpens iron, so one man sharpens another" Proverbs 27 I do not attend church regularly, does not mean I am an atheist, the above rings so true. Watch the video and see what I mean. This is one of, if not the most informative, down and dirty How To Sharpen a Stihl Chain vids I...

HA! How cool is this? Patronstart Field Marshall Fowler - YouTube

WOW! So did kubota have the MAX name first? Kubota Max :ep1 - YouTube

For My BX25 Folks I am about to be launched into another area of tractoring that I am not familar with, that being the 3 Point Hitch Assembly. (BX2506) I took all parts out of the box and began to familarize myself w/ its contents. It seems pretty straight forward EXCEPT, I am puzzled w/ Part...

Gents I am looking for input re: a #554 BearCat Chipper Shreader as pictured. Are they good, bad, don't waste my money? Go for it, do you own one, easy to sharpen? Is it true there are 3 differernt models per your PTO speed? 540, 1000 and 2000? (PTO RPM's)

Anyone know what this is exactly please? Parts availability ? Junk? Any specific knowledge about it you care to share w/ me?

I am digging for a MMM driveshaft from one of these MMM's; RCK60B23BX RCK54P23BX RCK54-23BX They all fit a BX25...and possibly others...see picture.

So I just called a dealer w/ a question and we were talking and he said he just came back from a dealer meeting and Kubota said they were going to put all books ONLINE and available to the general public! I asked when and it was suggested maybe 3-4 months... I am HAPPY! Dang, I need ALL the...

So there it is, a perfectly good, brand new, unused mid pto on my BX25 that I am seeking to put to work, somehow. :D Don't know what for yet, maybe an Auger, maybe a blender, time will tell. The BX25's mid-pto specs are up to 2500 RPM and the shaft, well, I don't know the exact call out for...

Are there any hydraulic hose journeymen / pros here that can take a look at my project and perhaps make some suggestions please? It is a long way from the diverter valve (green) to the grapples cylinder at full dump / curl. What is the best way to do this? I am considering welding 2- male x...

I have never pulled a plow. Is this too much for a BX25?

I have searched till I am blue in the face. The question is are Weatherhead Collet Rubbers, Replaceable? The T-400-2c/4c/6c/8c flavors... If so do you have a link to the part numbers? The most I can find I "think" eludes to "Replaceable Cages" Indeed are these rubbers called cages? If so...

So I am needing some hoses and fittings and I wrote a local hose maker and they asked me if I wanted Parker hose and fittings or Gates hose and fittings. What do I want? :o My only prerequisite is the fittings are silver in color to match the rest of the new tractor. TIA!

This is pretty cool. Are you familiar w/ "TED" , well this guy is a TED fellow as you will see. HERE is the link to his main page. The following video kinda sums it up. I bet ya a few of you guys can really run with some of this stuff... In a nutshell this guy has made available all his designs...

So I had need for some custom U BOLTs. Nothing wierd, 2.25" ID x 3.25" and 2" ID x 5", all 3/8" flavor, 6 pcs total. I do a search and find a bazillion "Custom U Bolt" companies. One w/ an absolutely beautiful GUI web interface, just fill in the blanks w/ pictures of every u-bolt known to man...

The wife and I are thinking real hard about selling our home in California and heading to parts yet unknown. She is a very intelligent gal, she runs an office for a stock broker, very successful her boss is, ...-because of her-... he does all the lieing, she refuses to do it. Myself, 39 years as...

Can anyone offer any input regarding this 12 volt Chainsaw? Is it junk, is it OK, is it a beast? TIA!

Can anyone refer me to a place to buy large shoulder bolts cheap? boltdepot.com has what I need, 1" x 3" Shoulder Bolts (they are measured by usable shoulder diameter and length) but they cost $24.00 EACH! :shocked:I need 2 plus nuts. I might be able to get away w/ 1" dia x 2-7/8" length

I am looking for that company that would rather get repeat business then try to retire off you on every job. In other words, inexpensive. I seem to have 2-4 jobs of 2-4 parts each I need cut each month, sometimes more, sometimes less. I draw in AutoCAD and can save in any years flavor. If...

Man I have a learning curve that is steep mountain! I see the hoses on my BX25 are labeled w/ this; 4STARFLEX 3000 1/4" WP 3000 PSI SAE 100 R17 2Q 2010 W17A (s) and hard to see the larger hose but I do see a 3/8" so I assme it is; 4STARFLEX 3000 3/8" WP 3000 PSI SAE 100 R17 2Q 2010 W17A...

Can someone eduacate me on a Seal Nut for Male Pipe (NPTF) I understand NPT threads but this thread nut, is it an extra seal or a seal for a loose fitting or a locknut kinda deal? Photo Details

Folks can anyone explain to me what I just found out? My BX25, the FEL valve, the curl, when I push hard to the right, it hits a detent. The bucket goes down at controlled speeds, slow to fast, till I hit the detent then it is one speed. What is going on here and why?

I do not know if this 1/4'-18 NPT tap is / was OE or not in the Snap-On set I pulled it out of, that I bought on Ebay, BUT, a picture is worth a thousand words. Adding insult to injury I paid McMaster to send a carrier to the shop w/ a "tap extractor" . It broke imediatly. I did what I...

I need some help deciding who's running gear to buy. I only need small. I have narrowed it down to 2 different companies. The prices are "close" , it is about most bang for the buck now. Both companies are easy to deal with, both are in it for the long haul. Kory Farm w/ stock 18.5 x 8.5-8. 2...

I do not deal w/ this stuff daily, I hope a couple of you can steer me straight. I have a device w/ 6 Zert fittings in it and the OEM drilled the holes for the zert fittings to big and there falling out. The holes are drilled to .375 - .379" or so inches . Is there a Zert bigger than this...

Gents I have ZERO knowledge w/ conveyors, although this may not be perfect, the question is, will it work. I have not seen it first hand to awnser any questions yet. I want the manufacturers name if possible to see if a cleated belt is available or if I can add cleats to this somehow. If I put...

Santa brought me a FEL grapple. Anyone seeing me doing anything wrong here, or shall I carry on? The tips of the grapple just barely touch the front edge of the toothbar, not the teeth, the horizontal bar that lays parrallel w/ the bucket, left/right. You can see the business end, the grapple...

__I am looking for opinions guys. I am adding a FEL Grapple to my BX25, adding "The Thumb" I am. I am going to afix a pice of 3.5 x 3.5 Angle to the top of the bucket via welding. I have seen guys notch the back in 4 places so-as to get a wrench in there on a nut but I am not liking that. The...

I posted in an older thread of mine, HERE. Then I realized this area was here. Any seasoned hydraulic guys here please? CLICK HERE

Today I received my TimberJack Cant Hook by WoodChuckTool in NY. This thing is built to last...I considered an old unit but glad I went anew... This thing is solid. No, not a shill, never seen this company till last week. Good work, solid tool companies need to stay in business, I spread the...

Gents I am looking for a little input from some season tractor folk regarding weed abatement. I run a new BX25. If I were to offer weed abatement what would be your weapon of choice to do it? A Flail Mower? A Rough Cut Rotary Mower? A Disc Harrow? or... As far as what kind of material, just...

Gents might I please get some opinions here? For my new BX25, in 48" width only, Gearmore has a box scraper that weights 355 Pounds in stock, it is a manual, 4 individual ripper tooth unit so each time you want to rip you have to drop 1 thru 4 teeth or 1,2,3 or 4 teeth, all manually done...

Fellow BX25 owners, can someone tell me what these things red line at please? The manual says not to rev it up for 50 hours I think, so I have not been going past 2400 RPM or so. What will these lil pitbulls tach at all day long running hard? I do not want to put the pedal to the metal for...

Gents is this a CAT 1 3-point? The unit (Cultivator?) is 8' wide, and yes, to big for a BX25 BUT, looks like I could easily cut it down to size, but will it connect to my BX25 3-point hitch? Thanx in Advance!

Sup All! I am the proud new owner of a BX25. I have all of 4-5 hours on it and I see a hydraulic leak . The posistioning of the flare nuts on the BH control valve is so close together it is nuts. I went searching for the right tool, I think I found it but I seek re-assurance, tell me YES, that...

Guys what is old hat to you is new to me. I took delivery on a new BX25 today and I of corse I must lube it. My question is, what in your opinion is the best grease gun? My machine is a BX25. I run a lot of Dewalt 18V tools so I have those batteries if Dewalt makes a power greaser. I...

AWSOME, my grin is from ear to ear. I FIALLY GOT MY FIRST TRACTOR! :laughing: __I see the BX25 comes stock with a BEER HOLDER! Yea! :thumbsup::thumbsup: Two thumbs up to the engineers! I think I will name here Orange Crush or Crusher for short. :confused2: Here, have a cigar; ..one for all...

Gents has anyone utilized the 4 front bolts up front that hold the engine guard in place for a winch? It looks like it is screaming for a winch. I see lots of pics of guys stuck...I want out and fast. I get my new BX25 in about 3 hours...I'll have a better look at it then. Has anyone done this...

__Looks like I am getting a BX25. Below is a list of attachments I am considering. __My question is, why do I NOT want this equipment and what / who makes better OR, if you were getting it, what would you do kinda deal.. __It is a small tractor, I think I am trying to keep all my attachments in...

Sup all, __Artisan here, a Licensed, Master, Journeyman, Plumbing Contractor, currently in business and residing in the San Gabriel valley of Southern California, wife from Oregon, myself from Mass. Union trained 5.5 years. __Switched from new construction and major remodels to service and...

Are there any skidplates available for the BX25? I think it will be high on my "to do " list when I get one since I will not be buying a mower. Additionally the front steering cylinders look like a possible place to smash as well, whereas a good skid there might be invaluable as well, ehh...

SUP all, Kinda new cause I have not bought a BX25 yet but if my local dealer gets his pricing in line I will pull the trigger. My first question is when do the new models usually come out? I do not want to buy and 1 month later see a new model that is "better" is available. Any info is much...