Looking For 1" Dia Shoulder bolts

   / Looking For 1" Dia Shoulder bolts #1  

Artisan

Veteran Member
Joined
Oct 9, 2011
Messages
1,959
Location
Monrovia, California
Tractor
Kubota BX25
Can anyone refer me to a place to buy large shoulder bolts cheap?
boltdepot.com has what I need, 1" x 3" Shoulder Bolts (they are measured by usable shoulder diameter and length)
but they cost $24.00 EACH! :shocked:I need 2 plus nuts.
I might be able to get away w/ 1" dia x 2-7/8" length

shoulder-bolt-dimensions1.gif
 
   / Looking For 1" Dia Shoulder bolts #2  
Fastenal has a wide selection of socket shoulder bolts. I was going to look up pricing for you, but there are a lot of variables required beyond just shoulder diameter and length.

Material?
Thread diameter?
Thread pitch?

etc., etc., etc.
 
   / Looking For 1" Dia Shoulder bolts #3  
....boltdepot.com has what I need, 1" x 3" Shoulder Bolts (they are measured by usable shoulder diameter and length)
but they cost $24.00 EACH! :shocked:I need 2 plus nuts.
I might be able to get away w/ 1" dia x 2-7/8" length

that's about what I would expect to pay for something like that.
 
   / Looking For 1" Dia Shoulder bolts #4  
McMaster Carr carries a lot of this type item. Not sure how they compare on price.

I suspect that $24 each for a bolt that size of any quality would be reasonable.
 
   / Looking For 1" Dia Shoulder bolts #5  
McMasterCarr same price.
 
   / Looking For 1" Dia Shoulder bolts
  • Thread Starter
#6  
Somewhere, somebody, has a crate load of these and would LOVE a 20 spot for a couple of them, including shipping no less I bet! ... :D

Yea, 50 bucks is not unreasonable, I just shop the daylights out of stuff looking for that "deal". Gawd I wish i were rich...

I think Fastenal was 1/2 as much again more than boltdepot...
 
   / Looking For 1" Dia Shoulder bolts #7  
:confused2: What is the thread diameter? What strength of bolt is needed?
 
   / Looking For 1" Dia Shoulder bolts #8  
Those are usually called "stripper bolts". Look in the Yellow Pages (yeah, they still exist) under fasteners and you'll find local bolt suppliers. That's about right pricewise.
 
   / Looking For 1" Dia Shoulder bolts
  • Thread Starter
#9  
BINGO! There .5" longer than necessary but a few washers will fix that.

Industrial Surplus at a fraction of the original cost

Lots 15802 and 15804, I think there are 18 bolts for 25 BUCKS instead of 25BUCKS EACH ! Muhahahahaha :thumbsup::thumbsup:

They have more of the 15804's as well if anyone needs any. WHAT A DEAL! HA! :D
 
 
Top