OP
2manyrocks
Super Member
- Joined
- Jul 28, 2007
- Messages
- 7,360
Based on my experience with my brush mower, I suspect that bigger wheels are not the solution. My rear wheels are in the second lowest bolt holes, I.e. second highest deck height.
The deck cutting height works okay in fields where there is no mulch debris, but I'd like to find a way to increase the cutting height to mow over the chunks of mulch debris in the fields that were mulched.
Looking for laminated wheels that would be taller than the OEM versions, one of the issues I'm seeing is the hubs on the taller wheels may be too wide.