Suggestions for tree removal

/ Suggestions for tree removal #61  
Started to read all the stupid stuff, kept amused for a while, but, if you want to fix the problem in time for dinner just cut the fence, using the fel to help push it over as you cut the stump, then restring that section of fence. wash up for dinner
 
/ Suggestions for tree removal #64  
Yep, as per previous suggestion, I'd put a chain or cable around the horizontal part near the break, and then tension it from the base of a big tree behind it with a hefty come-along. Then CAREFULLY fell the stump above the fence line, letting the tensioned piece pull it away from the fence as it falls [pivots sideways and down]. I've had similar things here with eucalyptus, but I usually use my big boom forklift to "lift and separate".
 
/ Suggestions for tree removal #65  
Doesn't look like a big deal to me. Let it dry several months, to lighten it. Then using your tractor get under the end where its split , chain if necessary supporting it lifting a little. Cut the tree stump at the ground or comfortable level. Move it sideways a little until you clear the stump, lower it down cut closer to the split. Lift it back up and push it onto the other side toss over any stump remains...

That's how I think I would attack it.
 
/ Suggestions for tree removal #66  
I agree with above. I have a pole saw I use to trim up tops before I do much more. Also agree about the snakes. From the picture it would wait for winter at my place
 
/ Suggestions for tree removal
  • Thread Starter
#67  
I agree with above. I have a pole saw I use to trim up tops before I do much more. Also agree about the snakes. From the picture it would wait for winter at my place
Thanks. The worst snakes are on the other end of the property. There's a pond for water mocs. We get copperheads, timber rattlers, and coral snakes, too. The moccasins are the aggressive ones, though.
 

Marketplace Items

INGERSOLL RAND  G25 GENERATOR (A58216)
INGERSOLL RAND...
2020 Club Car Carryall 700 Gas Utility Cart (A61567)
2020 Club Car...
Miller Millermatic 212 Auto-Set MIG welder (A63689)
Miller Millermatic...
DRAGON 500 BBL ACID TANK (A58214)
DRAGON 500 BBL...
2008 Case IH 2152 Combine Header (A63688)
2008 Case IH 2152...
KING 18 SHANK 3 BAR CHISEL PLOW (A63291)
KING 18 SHANK 3...
 
Top