Suggestions for tree removal

   / Suggestions for tree removal #11  
We had a pretty bad storm come through Sunday night/Monday morning. Lots of downed branches and trees. A guy not far from here was killed by one falling on his mobile home.

We avoided any really bad problems, but lost some mid-sized trees. This one is threatening to crush part of my new fence...suggestions?

View attachment 3578493
my suggestion would be to set a pully on a tree back behind the fence, then set up a rope on it and pull it with your tractor or a truck so it rips off and fall behind the fence (hopefully), then you can fall the standing piece.
 
   / Suggestions for tree removal
  • Thread Starter
#12  
The far side of the fence is leased to a big chicken operation. To the right, the property on the other side is owned by a huge corporation. Both properties are unused at present, but I cannot easily contact the property owners.

I was thinking I could support the top of the broken end with the grapple (the branches are already providing some support). Then I can separate the break completely. Drop the rest of the trunk and then push the remainder over the fence. Not sure if it's clear in the picture, but the ground drops into the corner. (Between the tree and the dog).
 
   / Suggestions for tree removal #13  
My guess is the branches aren't really supporting it. My guess is the tree is resting on the canopy and the broken trunk. When the trunk is completely severed, it may unpredictably twist and fall to one side or the other. Whichever way it twists, it looks like the severed butt end will still fall on your fence.

To explain, it looks unpredictable whether the tree will fall to the left or to the right when severed. One limb is already resting on your fence. What I think is predictable is that when severed, the butt end is going to want to spring out towards your property and fall in an arc even further onto your fence.

Also looks like maybe 1/3 of the splintered trunk is holding the tree up with a lot of weight of the trunk exerting leverage on the splintered hinge.


torvy tree 2.jpg
 
Last edited:
   / Suggestions for tree removal #14  
I've found that it is sometimes easier to lay down the fence wire, cut the tree without complications, then reinstall the fence wire.

Bruce
 
   / Suggestions for tree removal #15  
If the fence were laid down, might could use a long cable or chains to pull it down from a safe distance. Cheaper to repair fence than ER or worse.
 
   / Suggestions for tree removal #16  
I find many of the things I worry about never happen...and it's easy to over complicate an issue in my head.

Do as you mention in your last comment Mr. Torvy. Cut from the trunk hinge out towards the tree top, using your grapple to protect the fence, or to lift and hold the trunk at the broken hinge point.

5 minutes with a chainsaw cutting a couple of 16 inch sections from the trunk and you're out of jeopardy. The rest is basic clean up.

I cut a tree like this on Tuesday while visiting my son's place outside Tulsa, albeit it was overhanging a pipe fence into his horse paddock rather than a wire fence.
 

Tractor & Equipment Auctions

66" Quick Attach Bucket (A47307)
66" Quick Attach...
2013 Chevrolet Cruze Sedan (A46684)
2013 Chevrolet...
2023 John Deere FC 15R (A47307)
2023 John Deere FC...
2009 Peterbilt 384 T/A Wet Kit Day Cab Truck Tractor (A46683)
2009 Peterbilt 384...
1 (A49732)
1 (A49732)
2025 JMR Tree Boom Skid Steer Attachment (A46683)
2025 JMR Tree Boom...
 
Top