firedog
Gold Member
While you seem to have located the source of the voltage leak, I am still concerned about the grounding. The MH frame should be bonded to the panel ground or ground rod, which would give a path for the fault current (large or small) to ground. It doesn't seem this was happening.
Even if a device faults to ground, the grounded equipment housing or MH frame should conduct the fault straight to ground (path of least resistance).
The fault current should never pass through you (ie. when touching the door handle, opening the fridge.)
It's good that you found the source of the leakage, but you still need to check your grounding.
Even if a device faults to ground, the grounded equipment housing or MH frame should conduct the fault straight to ground (path of least resistance).
The fault current should never pass through you (ie. when touching the door handle, opening the fridge.)
It's good that you found the source of the leakage, but you still need to check your grounding.