The problems with extending the top hook on the QH is make it stick out further than the lower hooks. So you have to run your toplink link shorter to compensate. On a bigger tractor, with a longer toplink you have plenty adjustment so it is not much of a problem. On a smaller tractor like a BX with a short toplink, shortened all the way is not much off of most implements running "level." If I would have had it do over again on my HF QH I would have welded the hook directly to the QH.
Maybe someone like Everything Attachments will make a QH with a fixed top hook like the old imatch someday.
Maybe someone like Everything Attachments will make a QH with a fixed top hook like the old imatch someday.
