MX5800 tire pressure
- Thread starter coolbrze
- Start date
- Views: 2962
-
- Tags
- kubota mx5800
sea2summit
Elite Member
If the fronts are foam filled you're going to have a hard time adjusting the air pressure.
For filled rears I like to lift my heaviest 3PT implement up then release or add pressure until the outside edge of the tread barely touches on a flat solid surface.
For filled rears I like to lift my heaviest 3PT implement up then release or add pressure until the outside edge of the tread barely touches on a flat solid surface.
MechanicalGuy
Platinum Member
My manual shows 22psi rear.
oosik
Epic Contributor
I run my front tires at 40 psi. No foam - air only. I run my rear tires at 16 psi. Rears are filled with Rim Guard. Both front and rear are R-1's - six ply.
16 psi in the rears give me a full chevron contact patch on hard, flat ground.
40 psi in the front because I lift "heavy" with my grapple.
16 psi in the rears give me a full chevron contact patch on hard, flat ground.
40 psi in the front because I lift "heavy" with my grapple.
S854
Silver Member
- Joined
- Dec 5, 2017
- Messages
- 227
- Location
- Helena, MT
- Tractor
- ‘67 MF 135 Deluxe / ‘22 Kioti CK2610 HST/Bad Boy ZT Elite 54”
The only thing I’ll add is: Maximum pressure is listed on your tires sidewall… don’t exceed it…
cathy liebchen
Platinum Member
We run 30 f 22 r