3-Point Hitch Converting cat 1 to cat 2....box grader

[inode]

Can I set this cat 1 box grader up to work with a cat 2 quick hitch? I’ll be using it with my Kubota M7060.

 

[RickB]

Not likely. Further, the 7060 is capable of turning that box blade into scrap before you can get your foot on the clutch.

 

[WranglerX]

Here is QH dimensions, ruler will tell you how easy it may be...



Dale

 

[MtnViewRanch]

I agree with RickB, way to small and light duty to be using behind an M7060. Save yourself the hassle and frustration and get a unit that belongs behind a tractor of that size and capabilities.

 

[RoyKing]

If the width is right just slide on bushing over the cat 1 pins and be happy, you won't tear it up but probably not wide enough

 

[RickB]

If the width is right just slide on bushing over the cat 1 pins and be happy, you won't tear it up but probably not wide enough

If the QH is Cat II and the BB is Cat I do you really think the width will be “right”?

 

[oosik]

A couple of my Cat II implements are narrower than my rear tire width. Doesn't bother the operation, one bit, in my opinion. However, and a BIG, however - unless you are exceedingly careful - Rick B's post #2 WILL happen. Do yourself a favor and get a CatII box blade. You are NOT saving money getting a CatI implement.

 

[fruitcakesa]

I have an Cat 1 box blade that came with my old L4630. I bushed for use with my M6040 and have had no issues with it.
Of course, I mostly use it for snow removal which is pretty light use.
The minimal amount of earth moving I do won't ever damage it.

 

[RickB]

The Cat II quick hitch is the real show stopper here. Of course if the OP has torches and a welder anything is possible.

 

[D2Cat]

Inode, it appears you already own the box blade. Yes, a higher HP tractor could cause it to bend, however, if you watch what you're doing and go slow you can easily determine what will damage it before it happens. Spend $10 and buy a couple of bushing for the 3pt pins and one for the top link and see how it does. CountyLine Category 2 to 1 Lift Arm Bushing at Tractor Supply Co.