kubota b3030

Hey guys, im needing some help with my kubota b3030 cab. The cheap dip stick snapped off from the top. By that i mean the actual stick that goes in the oil disconected some how from the cap? I dont know if i should just leave it and buy a new one or try and get it out some how? thanks

Hey guys, i have a kubota b3030 with a cab 4wd and all that stuff. I mowed all tummer and the only thing that dissapointed me with it was it had no radio. Im looking at getting one and was wondering what to get? itd have to be loud enough, even though it has a cab. Thanks a ton!

what you'all think of the price. It's an '06, 200 hours, listed for $22K....with BH, FEL, 60"MMM, and a box blade. I went to Kubota's site and that stuff (w/o BB) would list right near $33K...so I'm thinking this tractor might be a steal. But understand I know a whole lot less about this stuff...

I have a 2005 B3030 that has around 475 hours on it. The only implement is a 60"mmm and grader box. I was thinking of going to a B3200 and getting a 60"mmm and FEL. I primarily use the tractor for cutting grass and grading a 600 ft long driveway and there have been times where I wished I had a...

Ok, I found the thread with my topic (twice) but am lost now. So, since I could not find a clear answer I'll try a new attempt. My Kubota B3030 runs my log splitter well enough by disconnecting the back hoe and plugging in at the rear. It's a royal pain. Need 3 hands with no room for 2. Can I...

I was mowing my CRP when I hit a rough patch, it bounced me around in the seat and the tractor quit. I tried to re-start and realized the PTO was engaged. I dis-engaged the PTO and it still won't start. I have rammed it back into the PTO several times, my seat is already by-passed. So that...

I have a new never used front mount snow blower with undercarriage for a B3030 that I want to sell. Bought a new L5740 and will not need it for my 3030. Anyone have any suggestions on the best place to list it for sale? thanks,

My 3030 digging out my old deck posts lots of fun !

Is it normal for cylinders and hoses to be almost impossible to touch because they are so hot after a few hours of digging on my b3030 backhoe

Just got my b3030 from barlows 72 inch deck still sitting on garage floor gonna try to hook it up later this is my first tractor so excited lol

All, Just wanted a quick rash of opinions on pricing. Went to a dealership and they were offering a B3000CAB, FEL w/60" Bucket for $24,500. Or a similarly equipped B3030HSDC for $400 less. There are other things I would add to these tractors but does this sound like a fair price for a...

At the Kubota dealership I was attracted to a B3000CAB. Very nice tractor and a pretty amazing cab. I also saw a B3030HSDC. To me these two tractors seem identical. When I came home I went on the Kubota website to look up the specs of these two tractors. The specs also suggest that these two...

posted this in the wrong forum first. I have a kubota b3030. it has a select lever to select mid, rear, or mid+rear pto. i can select mid and mid+rear, but cant select rear only. it appears the lever will not go far enough back to engage the rear only setting, and hits the plastic shroud...

I have a kubota b3030. it has a select lever to select mid, rear, or mid+rear pto. i can select mid and mid+rear, but cant select rear only. it appears the lever will not go far enough back to engage the rear only setting, and hits the plastic shroud before allowing enough travel. does anyone...

My 5' brush hog is about worn out, and I plan to replace it soon. The 3030 handles the 5' hog easily, so I'm thinking of upsizing to a 6' hog. Any advice is appreciated.

You don't see these everyday: ;) 2011 KUBOTA B3030HSDC Tractors - Less than 40 HP For Sale At TractorHouse.com

I have a B3030 with two rear remotes. The issue I have is I cannot make a connection to the second remote quick connects. The quick connects are mounted in a housing that holds the release collar in place so when you push to connect or pull to disconnect the hydraulic line moves while the collar...

Anyone have any success in finding a B3030 turn signal lens outside of a dealer. The OEM lens is a very expensive.

After the end of this snow season, I took a look at the cylindrical housing which houses the impeller blades (i.e., the area where the snow is shot out of the blower) on my Kubota B2782 snowblower. I am not sure what the official name for this part is, but it doesn't appear to have a...

Hello to all, Hit the wrong button didn't get a chance to write anything:ashamed:... Here is what I meant to write... I have 2 acres of wooded property which I have alot of landscaping to do and lots of time to do it. I will be adding 200 plus yards of fill, topsoil, seed, etc. I want to...

Hello all, I have a B3030 with a little over 400 hours, used it this winter moving snow piles when my Chevy plow truck couldn't push them any farther. So the weather finally changes and I set out to regrade the driveway (after destroying it plowing) using the B3030 with a 6' BB with rear remotes...

I have a Kubota B3030 Tractor with FEL LA403 with Bucket B2355 60" Wide I don't have the user Manual and I am wondering what is the Cubic Capacity of this Bucket. Thanks in advance. Jacques.

I found a used B3030 with just over 100 hours, 2007 model year, does anyone know of problems with that model? Has 63" front mount snow blower, does this get powered by mid-mount take off, and can mid-mount deck be added without problems? Thanks in advance.

I watched a tractor with a front broom on it sweeping the sand off of the town fields from the flooding this spring. It struck me that this would be an awesome tool for dethatching the yard. I figure I could broom the stuff right into the woods. I also could use it for leaf clean up in the...

Any B3030 owners have the WR Long Electric over Hydraulic valve kit installed? Looking for some feedback on the kit, how the installation went, any pics you might have, etc. I want to add hydraulic angle cylinders to my snowplow this summer, and eventually, I want to add a grapple. Thanks in...

my dealer said that when the blower comes i could save some $$$$$$$$$$ and install myself. has anyone done this? i dont know how they come from factory? i need info thx tony

My Kubota B3030 is used mostly for mowing and backhoe/front end loader work in the summer, it just turned over to 60hrs, I have been using 15w40 Mobile Devcon. I have a good supply of Mobile ESP 5W40 Synthetic oil. Is this a good oil to run in my Kubota B3030.

Has anyone replaced the Intake Air Line or the Radiator hoses, as the Owner's Manual maintenance schedule calls for us to do every 2 years? :confused: Just wondering how many factory original intake air lines & radiator hoses are still on the machine and at what age, or when any of you have...

just got price on b3030hsdcc 2010, fel and tractor for$23500!! will order blower this fall and pay cash. my only hang up is i seen leaks in the cab around the floor area? i think i should at least look at the new b3000, either which way old man wisconsin winters can kiss my back side!!!!!!! what...

Hi All, I am a new member to the site, I have been reading some really good things and am looking forward to being a member here. Ok Down to business I Have A B3030 with R4's I want to run a 12' or 14' two bottom plow on an existing field that has not seen TLC for 10+ years I was thinking of...

wow, what a pain trying to get a fel plow for snow, also need bobcat style quick attach for a b3030. have been talking to srs, hes been very helpful, but i live in Wi and he bought in Pa. is there any Wi. boys out there that have this set up? from what i gathered u have to have bobcat style...

I just bought a Kubota B3030 HSDC 2008 WITH A 2009 B2782A Font Snowblower . The concern is the snowblower uses the LA403 FEL Hydraulic Control to Operate the Snowblower Up/Dn , Rotation and Cap operation . Everything is fine except to rotate the chute in 1 direction you have to move the joy...

Hi all, Long-time anonymous lurker... looking to buy a B3030 in Ontario. I've been quoted: - $30k for B3030HSD-F, LA403 loader 54" bucket, BH76 + mech thumb, rimguard-filled Ag tires, 40Amp alternator, rear lights, shop manuals, B5320 ballast - $1700 for Landpride RCR1860 60" bush hog - $2400...

Ok.. I'll try to make this short. I've got.. just under 2 acres of grass. A half mile long drive, the last 300' of it pavement around the house. 11k sf of pavement. I currently have/had A F650 with a 10 foot plow for the dirt portion of drive. It's owned with a couple friends.. works great...

Hi all, I just had my new B3030 delivered, traded in my 2001 B2710. I'm looking for a shop manual, parts manual and a manual on the LS403. What's the best place to pick up a manual? Cheers, Leslie

hey guys, when blowing snow with the b3030 do u float the blower like the fel to prevent it from digging in to gravel? i have a asphalt driveway but the road to my house is gravel. it is a front mounted 63in snowblower that i ordered, cant wait!!!!!!! the snow will be sorry it ever landed in my...

I just bought a Kubota B3030 hsdc . I don't have the operation manual. Does somebody can tell me what is the little red lever on the side of the seat on the loader joystick . I tought it was to lock it but it don't seem to lock it. Thanks Jack

Arrived this morning as promised and waved goodbye to my BX24 training wheels. After all the seat time with the BX24, I jumped into the B3030 and can say only one thing...AWESOME machine. Temperature outside -30C windchill. Temperature inside +20C/70F. All the bells and whistles. Put 4...

Sorry if this is a stupid question, but when would you choose the B3030 or L2800? They look similar, but they are in a different series and the B3030 cost around $2500 more. Is there work that the one can do that the other cannot? I'm primarily interested in FEL work clearing up rustic ranch land.

hey guys, got a price for b3030, 63inch snowblower, and fel for $28000. love the cab and the platform space is so sweet! so what do you think????????? i want it so bad, it hurts!!!!!!!!!:laughing:

I am having trouble deciding on whether to purchase a 2009 Kuboda b3030 hsd with 183 hrs versus a 2002 challeger mt 295. Both come with FEL and both are exactly the same price...I own about 12 acres of very sandy soil in central Kansas. Any advice???

Does anyone make an aftermarket cab for a B3030?

I am going up this weekend to my dealer to make a deal on a new tractor. After doing allot of research reading, I have settled in my mind on the L3800. As I was reading through this forum, I did some reading on the B3030. It seems pretty comparable in features and price. I guess I am trying to...

Allright everyone, I have decided that it is a moral imperative to upgrade to a new tractor. Therefore I am stuck between the two, any thoughts are appreciated, and ideas on price are accepted also. PM if you want to be kept anonymous. Both fit the roll of what I want it to do, and the cab...

They delivered my new B3030HSDC tractor today. Yee Haw!!!!! Did some plowing clean-up on my driveway. 19 degrees in a flannel shirt, warm and toasty. I even had to turn the heat down!:thumbsup: Should'a done it years ago. Bill

I have a great wife. After this weeks snowstorm I decided to investigate a cab tractor. Tired of freezing my butt off. Found a nice new 3030 at my local dealer. Talked dollars and got a decent price. Came home and mentioned the details to my wife.:confused: She said, "It's about time. I've...

My rear PTO shaft wants to keep running when I pull my lever back to disengage. I looked for an adjustment point for the lever, but didn't see or missed a place to adjust the lever. My qeustion is: Has anyone needed to adjust the throw in their lever and how do you get it done? "Happy Holidays'

B3030 with R-4 Loaded with windsheild Wash I was told to put so much air in, but I forgot, I checked and I have 9lbs in each when the valve stem is at 12:00, Tires seem to be squating so I put it up to 15 psi with back hoe installed. Any idea what the pressure should be?

I'm looking at replacing my BX24TLB (about 400 hours) with a B3030 with cab and backhoe. It's a business buy...and I admit, I would like a bigger toy with a nice warm cab in the winter. I discovered (though the salesman never mentioned it) that the BH76 doesn't appear to be available for the...

I just purchased a 2006 B3030HSDC with 247 hours on it. What size rear mount snowblower can it handle? I've been mainly seeing 60". Can it go bigger? What are the best and most reasonable brands out there. I'm pretty excited to get moving snow here in MN. Thanks, Keeks43

Very sadly, my dad lost his courageous battle with cancer recently. He fought hard, but what a terrible, terrible, relentless disease that he could not battle any longer. While dad was fighting and in the hospital, mom and dad purchased his dream machine, a brand new L5740 with all the...

Looking for info on aftermarket suspension seat for b3030 kubota tractor email at barretdona@hotmail.com. Anybody know if a michigan seat highback suspension seat model #v-5300 work in the b3030 tractor

I am looking for info on replacing oem seat with new suspension seat. Have not found anyone who can tell me about a seat that will bolt right in or very little modification. Read about f3680 kubota seats being used but no mention if they need modification. Also dealer said cost is almost a...

I love my B3030. Power is great, size is great. I love the open station in the summer, as where I live, it doesn't get very hot. Winter is another story, though. Sure, I have all the gear, but every winter, I long for a cab. I use a mini ex every summer and fall, and am not a particular fan...

In the midst of adding a Washburn SSQA to an LA 403 loader on a B3030. Will also be buying a set of QA pallet forks. Would shimming the hydraulics to slightly increase the pressure help to offset some of the capacity lost by the SSQA with bucket or forks being out front of the lift arms more...

I promised that I would take some pictures of my B3030 and BX1800 as soon as I was finished with university for the summer and I intend to deliver. The FEL is a Burder 3030XP2 with a 4in1 bucket. Enjoy

really like the b3030 hsdc but i've only got an acre of land. live on a culdesac and the town dumps alot of snow on my yard so i'd use it with the snowblower and fel and maybe the mmm in the spring. is this tractor too large for my lot? thanks steve

Took a couple of happy snaps of a tree branch I was clearing for a client and I happened to catch my B3030. Though you guys might appreciate them more than the client :laughing: Most of the pics are of the tree branch, a 70-80 year old cypress (rough guess). The trunk logs were too heavy to...

Hi, I have a B3030 with turf tires, and was wondering if I would be able to pull a single bottom plow at any appreciable depth to turn the soil over in my garden. My tractor has no problems with a potato plow, but I have no experience with turning plows. My soil is sandy loam. Thank you Scott

Does anybody know of a supplier of rear fender flairs, (extensions), for a Kubota B3030 with a cab. Just drove it a mile down a gravel road and no longer can see out the side windows.:(

Hello Everyone, I am looking to sell my B3030 because I have outgrown it. I am trying to find out what it is worth. It comes with a loader, rotary broom, and a A woods bx backhoe. The Tractore has just under 300 hours on it. Any help would be appreciated.

The PTO selector lever does not shift into mid position. In the rear and mid+rear positions it seems to hang up between indents - not much of a problem when operating in the mid+rear mode but in the rear positon the rear PTO doesn't seem to engage fully while the mid PTO doesn't seem to...

I found a 2007 Kubota 3030 tractor with loader, Brush Hog and backblade attachment. The seller claims it has 60 hrs. The tires are filled, industrial. He is asking $21,500, which he claims is over $ 5,000 below what was invested. The price sounds high to me. Does anyone have thoughts on how...

Is there a way to simplify (make easier) the job of attaching a Bush Hog driveshaft to the rear PTO on a B3030? It seems to be a real wrestling match to slide the driveshaft coupler onto the splined PTO shaft, because the PTO guard and the plastic driveshaft safety tube are very much in the way...

hi i have a 2009 b3030 with a75 backhoe with 33hr not sure what to sell it for

I'd mowed 25' or so on the B3030 when all of a sudden there was an almost complete loss of power and lots of gray smoke. It was barely running. I got off and popped the hood, and almost immediately it started running again. It took a bit for the smoking to stop, but it seemed to run ok after...

Hey guys, I had a question for anyone with a B3030 regarding ways to improve the stability. My father bought the machine about 6 months ago and it has since fallen to me (Primary operator) to find a solution to its tendency to want to throw itself over on a slope. We live in a VERY hilly area...

I noticed today after cutting grass with rotary cutter and I was checking the blades that i could turn the PTO shaft when i pulled one of the blades towards me. Tractor was off naturally and PTO control lever was set off for PTO. Maybe I never noticed but I remember having to take the shaft off...

Just mowed for the first time with my new Kubota B3030 and the experience was simply amazing. It finally dried up enough for me to put the tractor through its paces after getting the 60 MMM deck, spacer couplings and HD alternator put on and back from the dealership. I was concerned about the...

Hello all, Just bought a used B3030 with R4s. The Rears are 15-19.5, fronts are 25x8.5-14. Owners manual says 12.4-16 rear and 23x8.50-14 front. Anyone know what's up?

Dealer delivered my Kubota B3030 today . Been in the shop almost two weeks . They replaced a quick-coupler on the FEL attachment . As it was leaking oil . Also replaced the tach cable , said the end broke off . Took the loader off put MMM on and mowed my grass . Seemed to work fine boy the grass...

Parts man stopped and loaded my B3030 today. Have a leak on FEL quick coupler. It leaks down on mower when the loader is off the tractor . Also last time I mowed the tachometer stopped working. Hope it doesn't take too long, it seems like part of the family already. PDC

Hello , All you kubota owner/operaters . I am new here , just purchased a 2010 B3030 back in june. Seems to be a very capable machine thus far . Previously had a b7100, was a very good little tractor. I really enjoy all the info here , it was helpful in my desition . Thanks All ! PDC

So my b3030 isn't working today. At first, it was classic "seat switch" opc - tractor started fine, but turned off whenever I tried to move it. So I took the four wires under the seat, and jumped them... Now the tractor doesn't even start! :mad: Clearly an operator presence control issue...

Ten minutes after delivery of a "Brand new Kubota B3030 with front loader" and seeing my son and I play with it, my wife wanted to drive it too! I am sad to say she operated the Front Loader better then myself and my son, for now. This is my third Kubota, my only wife and I have been married 22...

I have a 2.5 year old B3030 that I am considering selling. I really have little idea what it might be worth. Only reason I am considering selling it is because we are moving to FL, and have enough crap to move already. The property we are moving to is much less likely to need the capability...

My dealer delivered the B3030 last evening along with my brush hog. He has to make another trip (not far) to deliver the rear blade, box blade, and pallet folk attachment. One picture shows the B21 my dealer lent me in the background. I went right to work making good use of the BH thumb. I am...

Should the spacers go on before or after you put the hitch arms on. I've looked in manual but have a hard time seeing which goes on 1st or does it matter? I use it with a 5 foot rotary cutter. thanks Bob

I have looking at a B3030hsdc for awhile now. Today a dealer gave me a price of 26,800. It had rear remotes, defrost, radio, quick attach, 60' mmm, and FEL. I am still waiting to hear from other dealers. I contacted barlows waited a week then called but they said he was on vacation, and would...

I was over at the neighbours who has a home made 3pt cultivator 6 feet wide. He has a 4320 John Deere with ag tires. Idle curiousity led up to hooking it to the B3030 with turfs just to see how it did. Power didn't seem to be any problem but it was at or near the limits of traction most of the...

I am looking a new b3030hsdc with a fel, mid mount mower, with one rear remote. The dealer gave me a price of 27k. I have a 08 case dx45 with a fel and the dealer gave me a price 23k for a trade in. Does anyone know if this a good price i don't have many dealer options around here. Also is the...

I order my B3030 which will arrive at the dealer on Monday, June 7th from the warehouse in Columbus, Ohio. I ordered the B3030 with FEL and 60" bucket, BH with 16" bucket, Bush Hog 60" rotary cutter, 60" box scraper, and a 72" title-able rear blade. Will be delivered on Friday, the 11th. I am...

There is a big cross member right below the oil drain plugs (great design). At first I thought I would take it off, but it is torqued seriously tightly. Then I figured I would raise the front of the tractor off the ground a bit and just let the oil drain down on the cross member and to the...

Kubota B3030 lost down pressure changed filters worked after then stopped :confused2: any one know of any thing fuse or valve shut ??????:mad::confused::confused::confused:

I generally use Mobil 1 in my cars and I want to do so with my tractor. In my B3030 owner's manual it says, When an off-road vehicle engine runs on a high sulfur fuel, it is advisable to employ the CF, CD, or CE lubricating oil with a high total base number. In a chart it says CF is...

My cab AC does not blow cold. I checked the coolant a few months ago and it was low. So I injected new coolant, however it still does not blow cold. The A/C unit seems to be working, it clicks on and off and the belt runs, not sure what else needs looked at.:confused:

Late last winter I had a main hydrolic line under the cab, of my 2.5 year old unit with 200, hours, spring a big leak and drain all the fluid, very expensive to fix due to the cab, which was just out of warranty :(. Today I got another hydrolic leak:mad:. This time the silver line on the left...

need opinions on b3030 need to pull the triger by the weekend to get in on the o% finance price came in at 21300.00at local dealer.

I'm on day 4 of owning a new B3030Cab and it has been broken 2 of the days that I have owned it, and I'm afraid it's broke again. I installed a steering wheel spinner as I had on my old 2710, however I noticed it started to drift around the wheel while I was mowing for the first time today...

Well, I've been a long time Kubota fan and had my B2710 for close to 11 years. I received my B3030 cab yesterday and within three hours returned it to the dealer. The dealer didn't take the time to properly setup the mid mount mower and it developed a hydraulic leak on the block supplying the...

After a couple of years of freeloading on the great advice provided by members of this site, I thought I'd try to repay these contributions with a modest submission of my own. In particular I have noted many queries about the relative merits of the BX tractors vs the B series. I now have one...

When I would release my parking brake the set lever would pop up and hit the top of the slot it sticks out of and rattle the whole dash piece pretty good, so out comes the dremel tool/flex shaft and a 1/4" sanding drum,I cut out the slot about a 1/2" higher than the factory one to clear the top...

Finally had some time to get these on the site, better late than never I guess!! I have only had time to mow with it twice and so far and I really like it, quite a difference between it and the B2150 I sold. Everyone enjoy the pics. and I'll enjoy the 3030!!!!

I have a B3030 cab and recently bought a 60" mmm used from someone. I have a mower and a bunch of brackets that I can't figure out how they go on. After searching here a haven't come up with any pics. Would someone be kind enough to post some pics of there B3030 MMM and how the brackets go...

While operasting my b3030 this weekend for no aparent reason the steering effort about doubled. checked the fluid, raised the front end and cranked it both ways many times thinking air some how got into the system, and used it for the rest of the day. Its not hard to turn by any means but...

I am thinking of selling my 2008 Kubota B3030HSDC with Cab. A/C, Worklight It has a LA403 Front Loader with Quick Attach, Pallet Forks, RCK60-30B MMM, and a front mounted B2782 Snowblower. Total of 51 Hours since new I'm in NH and downsizing to a condo Anyone can suggest the best place to list...

I've noticed since last fall i hear a whine or squeal from the transmition area when moving. If i stop the whinning stops. This is only for the 1st 5-10 minis then no noise. Is this something i should be concerned about or any ideas what its from or what i can check? It has 320 hours and use SUDT.

I traded in my B3200 and picked up my new B3030 Cab yesterday and thought I'd share some pics! Next week I'll be taking my grapple in to get the brackets switched to fit my 403 loader. Stu

Downsizing from an L4630HST since the heavy work that remains on my acreage can easily be done with the 3030 and my mini-excavator. My wife loves it. I have mixed feelings. It's so incredibly tiny, like a tractor only smaller! But that has some benefits as well. It will fit into the sheep stalls...

I ran across a nice B3030HSDC fairly close to me. Anyone have an idea what this is worth ? I think it is a 2007. Has about 240 hours. Comes with rear blade and 72" Mid Mount Mower. Cab has heat, AC and AM/FM/CD. Pics attached. How much is it worth ? Thanks !

Sorry for the stupid question but I took the blades off of my B3030 60" MMM this weekend after 4 cutting seasons, they really looked good but do need some touch up. I got the outer blades off with the mower on the tractor using an adjustable wrench. The middle blade is much harder to get at so...

Years ago I started out with a BCS 2-wheeled walk behind, then moved up to a Kubota B1750, then an L3010, then an L4630 which has been an awesome piece of machinery. But over the years I've managed to accomplish most of the big land sculpting projects on my plate, and the 4630 has been overkill...

I keep going back and forth on these two models as I will be buying one of them very soon. I know the B3030 comes with position control which appears to be the biggest advantage over the B3200, but it also has some of the creature comforts too. I spoke with my dealer again, who is a very...

I'm still in my research phase, but plan to pull the trigger later this month. I was pretty set on the B3200, but now the B3030 has been peaking my interest. In some literature it describes the mid PTO as off-set, but on the Kubota website, the specification page show the mower as floating...

Just spoke with my dealer and the tractor and loader have arrived. Dealer is still waiting for the Quick Attach and also 1 set of Rear Remotes. I have an issue with my WR Long OBG2-48 grapple that we are working on to resolve. The Grapple itself will need 2 new Brackets because the width of the...

I have been working with my dealer and worked out a great plan to trade in my B3200 for a B3030 Cab tractor! Dealer is going to have to order one so hopefully in the next week or two I will be posting some pics of my new ride! Stu

I just sold my B2150 and waiting on my new B3030, Can anyone give me an idea what is the best hydraulic top link for this tractor? Thanks, Bret

B2150 SOLD!! B3030 on the way!! with LA403 FEL,60IN.MMM, R-1 Tires,Rear Remotes. Christmas in March.

Considering trading 7800 to 3030 cab.Any body have issues with cabs. Other than being to warm in winter and cool in summer.Thanks

Does anyone know anything about the fender extensions for the B3030 that is mentioned in the literature? I cannot find any pictures of them and was wondering if anyone has info on them. Thanks

Has anyone added their own refrigerant to the AC system in their B3030 or is this something better left to the shop to do? I have no pressure gauges if they are needed. Is it normal to need refrigerant after 2 years. I noticed last year that the air was just moving around and not cold.

I have an ATI quick attach front end on my loader arms. I had a Skid Steer quick attach bucket on the front. Disliked it from the day I brought it home. I've sold the bucket and am looking for a more standard tractor type bucket with a Quick Attach. Anyone know where they sell these type...

Any body bought 3030 with cab and loader lately need price check. Thanks

Been checking out an ATI Tach All Universal Skid Steer Quick Attach Hitch along with a Construction Attachments 60 inch bucket to convert the pin on bucket for an LA403 loader on a Kubota B3030. Looking at the items on Everythingattachments.com I'm thinking I'd almost rather get the bucket for...

Read a post today that where someone mentioned B3030s are discontinued. Anybody else know or hear anything about it?

I was ready to pull the trigger on a BX2660/curtis cab today AND THEN I test drove the cabbed B3030. I have "searched B3030" extensively but I would love to hear some testimonials/reviews on the B3030. Do any B3030 owners feel like you would be better served by the BX? Why?? Do any BX'ers...

Has anyone used a Farmi JL 290 skidding winch with a Kubota B3030? Is it a good combo? I would be using it for pulling small trees (6") up fairly steep slopes to the road. Comments or suggestions?

I am preparing to buy a new B3030 and having the dealer add rear remotes to operate a hyd. top link and a hyd. cyl. on the rear blade, though I'm not clear on the difference between a double acting and a float detent valve or which ones I need. Can someone help me on this?

The specs say the B3030 comes with a mid PTO, yet when I put together a configuration on Kubota's site, it says I need a Mid PTO kit ($620). Is this because I also spec'd a MMM?

What is the next size tractor that has all the feature of the B303HST and allows for a mid mount mower?

Noob here, but "lurked" and learned alot from the forum...I just recently purchased my first tractor Kubota B3200...Only have 4 hrs on it, but waiting to get more when the weather/rain will cooprerate. I see alot of ya'll talk more favorably about the 3030? I never looked at the 3030, guess I...

Hi, I have a B3030 that has a steering problem. I can turn the steering when its off and i can turn the steering at idle, but when i throttle up it becomes very difficult to turn the wheels (even when there off the ground). it also sounds like the pump on the block is cavitating some. I checked...

I have acquired a pair of wheel spacers for my Kubota B3030. Although it appears to be a straight forward task to install them I respectfully ask you folks for instructions since no instructions came with them. The kit came with six studs for each side where as the tire as mounted now has two...

My wife bumped a tree with the right rear work light and bend the bracket a bit. I didn't think too much about it, until I wanted to use the work lights some time later and they didn't work. The front work lights didn't work either! It appears to me that there is only one fuse for the work...

I noticed this weld broken when my tractor was parked. Have any of you had this? I have a 60" MMM in the summer. Would this be due to vibration...hit something I didn't notice or just a bad weld defect? I will be getting my 50 hr service in a couple of weeks so I am hoping this is something that...

OK I'm working a deal on a b3030 with cab 63" front mount blower with hydraulic rotator, and front end loader with 60" bucket. the cab has rear wiper and defrost but no radio. So I'm trading a bx2350 with front end loader and 60" mmm. The difference I have to pay is 18,911. the break down is...

I was wondering if anyone had the part numbers for the B3030 Lower Link Arms? I was thinking of installing a set on my B3200. Thanks!

Finally done with the payments. When I bought the B3030 (January, 2008), 0% was only offered for 24 months. I managed to do it in 22 payments (ouch!). But now she's all mine. It's a good feeling to have that done.

Does anyone know why Kubota says not to use the rear wheel extensions if you have a MMM? Do the mower deck wheels interfere with the rear tires with the extensions mounted? Thanks.

I finally found the time to replace the coolant in my B3030 this weekend. I used a Prestone coolant system flush and 50/50 mix of some kind of heavy duty ethylene glycol, I changed my color from green to red. I flushed out the overflow also. Question, I would have expected the flush or the...

I would like to add a blb BM 40 series double spool valve to my B3030. It's a standard 3-position, 4-way open centre valve with an adjustable relief valve. In addition to the work ports, there are 2 inlet and 2 outlet ports. The B3030 has a rear hydraulic auxillary block with an outlet and an...

Well I had my B3030 cab model for almost two years and as far as keeping the dust out of the inside of the cab it's a crappy design. I used it quite a bit this summer and last for dirt work, grading etc. If I'm working in dusty conditions the whole inside of the cab is covered with fine dirt...

Does anyone know what all is involved in changing the platform on a B3030 or B3200? That is.....if I can get the platform replaced under warranty. Dealer would be too far away to take the tractor back. Thanks!

For all of you that own or have owned a B3030 cabbed tractor with hydro can you tell me what you thought of it? What were some of its strengths and weaknesses? How do you like the front mounted snow blower and the mid mount mower? How well does the machine turn while mowing with turfs and r-4's...

I just received a Model 25C tiltmeter from R&B Manufacturing for my B3030, and I have two questions: 1 -- Where is the best place to mount it? I'm guessing it may be the vertical left FEL support. I'd prefer not to drill holes in the hood or anywhere else, and would use the double-sided sticky...

I made every attempt to buy local and really wanted to do so because of the economic conditions, but no one should be faulted for buying the same tractor for thousands less out of state. A difference of a few hundred dollars would have kept me local, but thousands of dollars can't be ignored...

Looking at a B3030 with 60" MMM about 650 hours. What should something like this sell for?

For my 2005 B3030's 4th Birthday I gave it a fresh charge of SUDT & filters plus a wash & wax. I had it delivered 4 years ago this weekend and 305 hrs ago. It has been a real joy to own and operate on my 3.5 acres. It has done everything I have asked of it and I am still amazed how versatile it...

I am thinking about upgrading from my deere 2320 to a Kubota B3030 cab, But have a few questions for you guys who own one and know the ins and outs of owning/operating one. How top heavy or tippy is the tractor on uneven ground and if you run over a medium sized rock (say the size of a...

I need a new front wiper blade for my B3030. I went to the dealer and the blade was $25.00. Just seems expensive for a 15 inch wiper blade, not knocking the dealer, they buy from Kubota and have to make money also, but has anyone found a blade at a Walmart, or Tractor Supply or anywhere else...

The dealer says my B303 with Loader won't lift the Road Boss 5ft grader w/o lifting the front wheels off the ground. Anybody have experience with Road Boss and 30HP or under?

I went to the Kubota dealer today to test drive a B3030 with cab. I am interested in one as I want to mow the lawn in the comfort of a cab with A/C. And maybe in the future to snow-blow as well, but no concrete plans yet. The only tractor I know is the JD 4720 with cab. Obviously one cannot...

Hi all get my new b3030 on friday cant wait. Hope i have good luck with it.Hope to buy the backhoe in about two months bh-75 or the woods 80x

Hello all, I am new to these forums and wanted some input reguarding the Kubota B3030. I am a residential remodeling contractor and do mostly interrior work, but do pleanty of jobs a tractor is highly appealing for (building additions occasionally, digging posts, and moving material or...

Some of you guys must think that I am crazy. I just bought a John Deere 4720 and now I am talking about buying another tractor. And the Kubota B3030HSDCC cab and John Deere 3720 cab have not only different price points but are also different in size. For this (serious) discussion let us consider...

I picked up my new B3030HSCC today and was a little surprised to see that it had a horn. I drove a friend of a friend's cab B3030 and I almost sure it didn't have a horn. I think his might have been a 2006. Is this a new feature?

Last fall I notice when my tractor was parked not running I could not turn the wheels when standing still in the garage. Over the past months using the tractor I notice more and more the steering would make a fluid bypassing noise while turning hard/fast right or left. Yesterday with a full...

I am coming up on 2 years on my B3030 and the book recommends changing out the coolant every 2 years. What are some opinions on what to use for coolant? Mixed at what rate? Do you flush with a cleaner or just flush with water? Is well water OK? I take all of my oil and hydraulic fluid to...

I am planning to buy a grading scraper to dress my 500' driveway. Can anyone confirm that a B3030 will handle a 60" (Landpride GS1560)? For people more familiar with brands other than Kubota - this is a 30hp tractor that weighs about 1850 pounds dry, and with no loader. I'm not as concerned...

I was doing some dirt work in my back yard a few weeks ago and loaded the pickup bed with some clay that I wanted to get rid of to make room for some good top soil. The truck was load (over loaded actually) and I still had about a 1/2 scoop of soil left. Since I didn't want to make to trips...

I have a 2005 Kubota B3030 and am trying to sell it. I can't find any good pricing guides so I am asking for input on coming up with a sales price. The tractor has never been used commercially and is in great condition. The tractor is set up as follows: 2005 Kubota B3030 4 Wheel Drive Tractor...

I have a 2005 Kubota B3030 and am trying to sell it. I can't find any good pricing guides so I am asking for input on coming up with a sales price. The tractor has never been used commercially and is in great condition. The tractor is set up as follows: 2005 Kubota B3030 4 Wheel Drive Tractor...

After weeks of looking at Kubota's I've decided on a B3030HSDCC. I started out looking at the B2620 but one of the dealers had a B3030 cab model on the lot and I fell in love. A friend of mine has a buddy that owns a B3030HSDCC and I went over to his place on Saturday to check it out where he...

What is the exact difference between the B3030HSDC and the B3030HSDCC? Thank you. Regards, FRIZ

How high (tall) is the B3030 with cab and turf tires? Thank you. Regards, FRIZ

I've been researching this vibration issue in the B3200 series tractors, and it seems to be something worth paying attention to so far. But I was offered an opinion on the B3200 as it compares to the B3030. Some in the business seem to feel the B3030 is the best between the two. Kubota even...

I am seriously considering buying a B3030HSDC (additionally to a JD 4720) for my 78 acre property. The B3030HSDC would have the following two tasks: MOWER: I originally wanted to buy the JD x749 with a 60in mid-mount mower. But know I am attracted to the Kubota B3030HSDC (air-conditioned cab...

Well, I'm gettin close to my 50 hr service and was wondering what all I needed to change everything that is required at 50hrs ??, what kind of oil ( Kubota ,rotella,ect) and how much oil in the engine, which filters and ect. or if thiers a prior post on this service please direct me to it, I...

Hi everybody: Is there a grass collector available for the B3030HSDC? Please advise. Regards, FRIZ

I finally got my new tractor. B3030HSDC with FEL and 60 in bucket with 3 hooks. I got a 60 in MMM and the front mount snow blower. I went with turfs and RimGuard in the rears. Cut grass twice and moved some washed out dirt but not much else yet besides a wax job. I do notice the power downgrade...

I was wondering what the best size I need to purchase, a local dealer has 4ft King Cutter, 1195.00 and 5ft for 1295.00, I've heard many use 5 and even 6' tillers here, but the dealer said he suggested a 4' for my B tractor:mad::confused:, me thinking more a 5':D;):), I have 2 acreas, fairly...

I am having a problem installing the front suitcase weights on my B3030 HSDC; it does not have a loader, but has the grille guard that comes with the loader as a stand alone option. AFAIK, Kubota uses the same grille guard with or without loader; some brands offer a different guard if not...

I want to put flexible drag links on a L3400 and I heard that the B3030 has them. Does anyone know if the B3030 part will fit an L3400? I know there are aftermarket options (Pat's) but it would be nicer not to use an add-on.

I was planning on purchasing an ATI Tach-All for my tractor when I came across an ad on Craigslist for a skidsteer quick attach. Contacted the seller...... turns out he works at a Kubota dealer, and he has a Kasco Uni-hitch to fit LA401, LA402,and LA403 (like mine) loaders. He claims it was on...

Hi to all: I too am a new to the tractor buying arena, I earlier posted a price check on a b7510 with implements. Feedback was positive and I went back to the dealer and he said no with my counter offer which was OK. If it is meant to be it is meant to be. I have found another tractor a B3030...

I notice when hooking up an implement on my B3030 that the PTO output shaft on the tractor does not freely spin like on my old JD 790. Normally not an issue, but there have been times in the past where I had to rotate the shaft on the tractor if for some reason I couldn't spin the shaft on the...

The new tractor won't be ready until next week, I wanted the rear remotes which had to be ordered. Also getting the FEL, which they have, and a Landpride quick hitch. Looks like I will get it just in time for milder weather. The last couple of times I was out on the old tractor with the snow...

I traded my B7800 last year for a L3240HST. It now has 35 hours and I want to go back to a B which seems to fit my needs better. Messed up and emailed Brady yesterday at Barlows and told him of my desire to trade back to a B. He has priced the trade to the 3 I picked. A used B3030, used B2630...

This valve was used last summer after I installed the Top-N-Tilt 3 point hydraulic cylinders and recently replaced with a float detent (B7305) valve section. The B7304 double acting valve can be used singly (first position), in pairs (first and second positions) or in first position with the...

I broke down and bought a B3030 with fel and the 72' mmm last june and I almost cry with joy everytime I look at it. I wish I had more projects to do with it. Last summer I used and mostly for mowingand cut by time by two thirds over my old 38" John Deere riging mower. last week and I put it...

Has anyone put RimGaurd in turf tires for the 3030 and do you know how much weight it added? I want to take my mounted tires to a dealer 90 minutes away and want to check weight before I trust my older 1/2 ton GMC.

Hey guys - I got my new B3030 yesterday. It ends up that my dealer couldn't order a BH75A backhoe for the B3030, and Kubota had him order a BH76. It was few hundred dollars more, but has the capability of putting a Kubota mechanical thumb on it. My 66" light material bucket for the FEL wasn't...

has anyone had trouble with the push pull cable that runs the loader bucket from the joystick?

I have a b3030 with an la403 loader. It has a cab and the controls from the joystick to the loader are two push pull type cables. I have had two cables come apart at the ends. They are 130 dollars each. Has anyone else had this problem.

Found and purchased a nice set of amber/red LED lollipops on ebay. Am just now installing them on a new B3030 HSDCC. I noticed that each side has a little two prong female pigtail hanging unused up there at the lollipop mounting bracket at top of cab. Are these wires run to any cab switches or...

I thought I would share with who ever is interested in putting in an interior dome light in their B3030 It's kind of a long post so only read it if your interested in putting a light in your cab. First of all Don't be AFRAID of taking down the headliner, it is easier then changing the oil...

It just showed up about 30min. ago, rode it a few minutes, waxed the hood and ect and armoraled it downa nd parked it, gonna have to wait a few day before I can bear scrapin the paint off the bucket,:eek:, and I'm glad I chose it instead of the b2?20, now it's time to goto work to pay for it,:(,

As I've mentioned recently, I'll be taking possession of a new B3030 soon, and had planned to get the Kubota QA bucket and pallet forks. Since I've been lurking around the forums lately, I've noticed that some of you B3030 owners have the ATI Tach-All bracket instead of the Kubota pin-type QA...

When I put in the DVD/ stereo, / backup camera it sounded Ok but still something was missing even with two 6.5 inch speakers mounted behind the seat the sound is always competing with the tractor sounds. After watching 4ahorts new tractor video last week and seeing his built in speakers in his...

My 2009 comes next month. The front mount snow blower was behind at manufacturer. I am still nervous about how much traction I will get with the 4wd as I have a long sloped laneway. I have the rears weighted but I haven't had 4wd before and I am curious just how much traction improvement I will...

The rear remote levers on my B3030 vibrate loudly at times. Other levers seem to have a plastic sleeve positioned where the lever runs through the lever guides. Is there a plastic sleeve that I can order for these levers? Have others noticed a similar problem and found another solution for this...

Thanks for the input from a few of you on the value of my BX22. I just sold it last night over the phone for $10,400. Not as much as I would have liked, but I feel that I did ok. We close the deal next Sunday, and I'm scheduled to pick up my new B3030, FEL, 60" MMM, and pallet forks the next...

Just tried out my new steering wheel spinner tonight in the snow. I was really impressed of how easy it made steering with one hand on the fel control the other on the power knob. I even called my son our "you have to try this" after trying he agreed. Then I discovered a problem the knob once...

I am planting 3 acres of trees in an orchard on my 5 acre property. I have some tight corners, some really short rows and some hillside.etc I have spacing of 12 feet in the row and 15.9 or so between rows. I will have to bushhog, spray, pull a trailer. I also need to move rocks around and...

My cab is dark in the front no lights other then the headlights , in the back I have red tail lights. I was toying with the idea of running lights. Since I installed the B26 factory horn button I now have a switch position for parking lights with headlights off, so I can just turn on the running...

I was working fine until I put a new load of fuel into the 3030, now I get low power on and off and I need to push the throttle back to idle to stop the problem. Could I have gotten condensation in the diesel fuel, and if so what do I put in the tank to absorb the water. I know in a gasoline...

I have rolled 153 hrs on my B3030 and need to do my 150 hr service. Can anyone tell me what to expect on the cost for everything needed. But more importantly can you fill me in on any "good to know" things on performing the service so I don't have to figure it out the hard way. Any tricks so...

Where the freshly graded dirt is, there was a 2 ft high 30 inch wide 50 ft long stone retaining wall which I built in 1986 when we put the garage addition on the house. It always collected leaves up top and on the bottom of the wall and had to be trimmed after mowing. There was also a wall...

This has been like this on my tractor since I first got it. I didn't think it was a big deal but it may be related to my fume problem?? On our tractors there are three vents up front by the windshield and two vents on the sides. When I have my heat on, and switch the control with most of the air...

Thanks bandit67 for your post on B3030 ROPS light project which after looking at you attachments leads to this new thread. First off I must preface all this with the fact that I have no experience with the use of standard rear blades esp. in snow (my box blade/scraper would only jam with...

Today's 10-inch snowfall gave me the first real traction problems I've had in the two years I've had the B3030. I have R4 tires and use a rear blade and front loader with no chains or weighted wheels. Today's snow was on the heavy side, and I found that I bogged down a lot using the rear blade...

I got a $21,750 quote from a dealer yesterday for this unit with a LA403 loader and RCK60-30B mower. Is this a fair price for a new unit? Thanks.

Ordered new B3030 a couple of weeks ago and it is now at the dealer waiting on a mmm bracket. Took three weld-on hooks over for the bucket and at least was able to sit in seat and look it over a little. Ordered the remote joystick and they had it mounted and I think it will be great. I will...

I just traded my B3030 for a Grand L 3240HST today so I have a bunch of brand new B3030 filters. I am located in Connecticut. If there are any Connecticut TBN members with a B3030, I will let the lot of filters go for $100.00 cash and carry. They are all brand new in boxes and over $130...

This is my delima, I have a acre yard, and 2 acre field to bush hog, I can get a b2920/w 60" MMM new for $13,ooo.oo, a BX2350/w 4' bush hog,54"mmm with 27hr for 7800.00, or a good deal on a B3030 o5 model with 179 hrs, 54MMM,bush hog Tiller,bush hog post digger,box blade,loader,and fertilizer...

I am looking at both...I like the bigger Kioti but friends have said Kubota will be better financial investment. Mostly needed to move snow with some FEL work. Laneway is 1/2 km with 40 acres of other needs (7 acres of bushlot trees) I like hydrostatic as left leg is bad. We are in a heavy snow...

I had the factory stereo in the cab but I wanted to install a backup camera with monitor instead of having both the radio and a 7 inch monitor I thought i would just replace the radio with a Kenwood dvd player am/fm cd add larger speakers and a backup camera all in one unit. I just had to make...

After posting in this forum and getting feedback I recently purchased a new B3030. I read a lot about this model in this forum and elsewhere but in hindsight I obviously didn't search enough. My tractor has excessive vibration in the steering wheel and in the floorboard at 2000 rpm and higher...

I have a B3030 hydrostat trans and a cab. The front loader has a quick attach front with a skid steer quick attach bucket. I have power enough to pick up items in the bucket, but my issue is when I need to pick up the front end to slide the mower deck on and off the loader hydrolics are very...

I have a B2791 front hitch for the B2765A front snow blade, I do not have installation instructions yet from the dealer. Can anybody tell me the correct hook up of the hydraulic lines for each cylinder according to this picture? I would say one cylinder would be hooked up to the red and blue...