Kubota B3030HSDC SNOWBLOWER .

[jackdenyse]

I just bought a Kubota B3030 HSDC 2008 WITH A 2009 B2782A Font Snowblower .
The concern is the snowblower uses the LA403 FEL Hydraulic Control to Operate the Snowblower Up/Dn , Rotation and Cap operation .
Everything is fine except to rotate the chute in 1 direction you have to move the joy stick all the way left past the detent and that cause the chute to rotate very fast , is there somebody out there that solve this problem.
I was thinking of adding a flow control but I am not sure I don't know much about hydraulics.

Thanks for the help.

Jacques.

 

[kennyd]

Yes, common problem...If you search the term "regen" you will find it discussed quite often.

You can install a inline restrictor valve that's adjustable like this one: Surplus Center - 1/4 NPT 5 GPM PRINCE WNV-400 NEEDLE VALVE

 

[Ductape]

I know it would be spendy....... but best way would be elec/hyd third function to control the chute.

 

[forester2]

Jack: Once you own it awhile I think you'll develope a technique where it won't be an issue (my personal experience)