jd

We have a "new to us" JD 7200 max Emerge 4 row planter. We are in the process of getting it set up to plant corn and are having a hard time. Whenever with raise the planter the marker arms drop, and when lowered, they fold up... the complete opposite of what we need. Additionally, one of the...

Going through heavy brush my 5055e stopped running. The ignition fuse was burned and when I looked under the tractor there were two wires, one red, one white loose. I replaced the fuse and twisted the wires together and was able to run the tractor. Do these wires go to the PTO lever as a...

Greetings I have a 20 year old 4010 compact tractor, reasonably good shape has been serviced regularly. I noticed this past year the FEL doesn't seem as strong, the power steering, once in a great while, will cut out and won't move. Yesterday the FEL just flat quit raising when I was lifting...

Hello. New member here. I have a JD4720 tractor with a cab. If I pull the transmission dipstick when it’s warm, there is a large release of pressure. I don’t think this normal. Is there a vent that could be plugged? If so, where is it located. Thank you.

Looking to buy another tractor. Looking at a 2020 JD 5090E (assembled USA) and 2022 JD 5090E (made in Mexico). Both have low hours. Any recommendations?

JD E120 does not go forward or backwards. Do not hear any whirling or grinding sounds just does not move. Tractor can be rolled forward and backward whether the bypass rod is engaged or not. When it’s engaged, there is a little ticking sound as it rolls backwards. From previous car experience...

Hi, I have a john deere 2305 tractor and the back u joint needs to be replaced. Can anyone tell me the best way to remove the shaft? It looks like the whole thing has to come out but I can't seem to get the flooring off so that I can see from the top. Thank you so much in advance from any advice...

I'm on the brink of buying a CT2025 and want to have a backhoe, however this is where it get complicated. :) My brother in law has a JD447 backhoe (3pt) that I can use/have however I want frame mount it to the 2025. Has anyone purchased the Bobcat "subframe" brackets and modified it and...

I am requesting someone in the Northern California area near Auburn allow me to compare one or two items on your tractor with mine. My tractor was disassembled and I am trying to piece it back together. I didnt disassemble it, I just own the tractor and Im trying to get it up and running again...

I bought a used 4610 while deployed overseas, my handyman back in the states ended up blowing the engine (connecting rod thru the crankcase) Long story short when I returned home two years later the tractor was in pieces, I had the engine completely rebuilt, Ive been trying to piece it all back...

So my 3 point quit raising. I looked inside filler hole and seen fluid leaking from lift cyl. I pulled rock shaft housing and put new seal in cyl and put back together. Started tractor an 3 point not doing nothing. I put a gauge on pump. Started tractor an only reading 1400# in idle. Ran rpm up...

Anyone tried using JD's new online parts site? I can only determine how to access very few different model parts catalogs. I know change is difficult the older one gets & I'm OLD! I thought the last change to JD parts was bad but JD really performed a Dandy Change for me when I attempt to look...

First question. What is the default connection to the front axle if there is no power to the solenoid? Locked or unlocked?

Hey everybody, My JD X749 w/ Yanmar engine is giving me fits. The starter has been finicky for about a year being reluctant to turn over. It seemed if I finessed the key as I was tuning the key it would finally engage. Assuming it was the switch I changed it out without success, and continued...

Troops, Took the sort-of-new-to-me tractor for a spin around the back 11 yesterday which is all standing on edge, some of it pretty seriously. About halfway through my traipse, the low fuel idiot light came on and the fuel gage started acting posessed, reading from 3/4 to 1/4 with stops in...

Just listen to the warranty etc willy

My JD X580 mower deck won't engage when I pull the yellow knob lever. Not sure if it's a coincidence or not but when it stopped working I looked underneath & saw that one of the deck leveling bolts (left side when sitting on the mower) had broken so I replaced that along w/ the concave washer &...

Recently purchased a clean, low hour, underpowered 2005 JD 3320 with a Yanmar 3TNV88-M engine. Wanting to increase fueling a little for more power as most engines have more potential of course when they leave the factory. May someone have some input to offer before I dive into this project as a...

Greetings all, I have a 2004 110TLB, lately, the pedals forward and reverse have been unresponsive. Sometimes forcing the reverse up enables the forward to move, sometimes not. Ive sprayed the potentiometers with WD-40. Didnt seem to do much. help.

I was mowing yesterday and I caught a branch and wedged in between the blade and mower deck on the right wing and it stopped that motor from spinning. I removed the branch and and it worked fine as it should. 15 minutes later I went through some thicker grass and it tries to bogg the motor...

Purchased this little 20 HP YANMAR mule at auction with 694 hours. Even the engine paint looks new. After servicing and changing filters I mowed some very tall spring grass and compared to our X734 with a 25 HP Kawasaki there is no comparison to its ability to mow with diesel “torque”. No leaks...

I can raise my bucket and tip in and out, but have no "power" to lift front tires off the ground. I replaced the pump (truth is I wanted one on the shelf anyways), no affect. Everything else looks good, no leaks, fluid/filter good. Kinda thunkin it may be an internal seal somewhere that...

Hey everyone, I picked up this 2030 at an auction recently and I have a question about the rear remotes. Looking at what is on the tractor and comparing with the few pictures I can find online, there are controls for these remotes, correct? If you look at the pictures, the lines run straight to...

Hi, I have a JD 855 1987, i have some problem with the SCV, but to replace it, it's like 3000$. I found it dont have return hose, directly bolt and return on transmission housing. The question is, can i remove it, block the return hole and install an aftermarket flow divider and control valve...

Can anyone help with model of this planter

I'm attempting to help my neighbor with a 7820. He changed fuel filters during routine maintenance, started engine & backed out of his shop. Engine stopped operating & low fuel pressure code appeared on instrument panel. He has checked to be sure fuel tank is venting, fuel filter is sealing...

We've recently had a good amount of much needed rain. Unfortunately, the fuel filler cap on my 3320 wasn't tight and a quantity of water entered the fuel tank. It was only detected upon the engine ceasing to run shortly after starting it. The engine is Yanmar's 3TNV88 with 200 hrs on the...

I was looking for a JD 4110 and Found a JD 755 with less than a 1000 hours and looks like it has been very well maintained. I know owners who love the 4110 but none of them knew much about the 755. I have a couple questions: Can you still get parts for this machine? What’s the reliability of...

I have an old version of the cranking system that I have been using to check the starting system. But my tractor is a 1995, and has a B in the serial number instead of an A, so I'm wondering if anyone has knowledge of where I might get a new version of the cranking diagram? Some of the wires on...

Hello, Picked up a 1999(?) 345 with 1535 Hrs. for $2000 from a JD rep. He had no manual so, is this a standard, GX, GT or other ? Now, my brother in law says, I need to replace the oil pump and gears before they fail ? Seller claimed the engine was never apart and also, never serviced the...

Picked up a nice older 5400 JD but I need to do a couple things to it. Would anyone happen to have a PDf of the service or tech manual handy. Thanks

How do you pull the oil seal? Should I just screw in a sheet metal screw and attempt to pull it out? Need to drain the transmission fluid first? Where can I find replacement seals and are the brake shoes no longer any good since they been soaked in oil?

I'm getting ready to buy either a 5075e or a M4D. Currently own a JD 4052r and a Kubota B2601 so I'm not necessarily loyal to either brand, both dealers are rather close and seem good to work with. I've really looked at both tractors and each has things I like. I've heard a lot of people...

My front end loader joystick will only raise and lower no side to side movement doesn’t return to center position also.

Driving me crazy! Warning triangle on dash display with ! keeps showing up without really pulling it down...up a hill or any change in the load. Manual gives same good old response-call your dealer. Warning for all: I bought this new from a major dealer in another state and my local dealer...

Hello...new to the forum. I own a 2005 John Deere LX280. Been a great mower for almost 20 years. Has about 700 hours on it. Was looking for a new model that's as close to this model specs as possible (size, hp, deck size, reliability). What are your suggestions? I'm guessing the 300 series...

Hey y'all, new here. Was hoping to find some help with my 5075E. Was out running it a couple days ago and it was shifting into all the gears and acting normal and then randomly one time I went to go back into 3rd from second (just going down the road, no implements running) and the shifter lever...

A friend had a hydraulic leak on his 2350 and after removing the hood we discovered split/rotted small hoses running from what I assume is some sort of surge tank just behind the radiator. The tank is about 8" diameter or so and has a T fitting on top with barbed nipples where the two lines...

hey guys, im new here. hopefully I came to the right place to find some help. I just bought. used 2011 1600 series 2 with 2600 hours. hours didn't really bother me as the machine didn't look beat up and id only be using it 5-6 hours a week, 6 months out of the year. I used it Monday for the...

Need help finding seed spacing sprocket

My wife and I have been looking at getting a side by side for running up and down the mountains in southeast KY. It seems the cheap ones start at about 8000 and they go up from there. The JD Gators can easily be 25000. Even used the resale seems fairly high for what it is. My daughter was...

Annnd I am back... Ok got some strange things afoot with the 2440...When the PTO is disengaged, center lever down, I am having hydraulic issues. The Power steering will only work intermittently with High RPM's, and the rock shaft will do the same it may or may not go up with the higher RPMS...

I have a JD 1050 (I believe it is 20 + years old) with a 3-cylincer Yanmar engine. The JD dealer replace the fuel injector pump (that I bought) and now wants to 'clean' the injectors. The estimate he game me seems way too high. Does anyone know how many hours it would take to install the three...

My 1996 JD 770 tractor is not starting. i get no lights or anything. checke battery-it's good. i checked the fuses and after pulling them all-it did start. then, a few days later the same exact thing happened. i quickly tried the check the fuses again and this time it didn't help. any...

1996 JD 6200 Open Cab: I refuse to believe that I have to buy a whole new fuel pump to get a new filter/strainer that is installed on the end of it. Dealer wants over $100 for a new fuel pump. I would think the filter on the end would only be a few dollars and should be a separate part. Does...

Dash comes on and lights up, error panel says "neutof" but starter does not start All lights in dash on, headlights come on bright Battery is JD battery new in December - I have not tested the battery Cleaned battery posts and the connection on tractor from battery to tractor for both - and +...

Friends, and elderly gentleman in our church passed away and the contents of his property are being auctioned on January 26th at his home in Raleigh, NC. He was quite the collector and liked JD equipment. Items at auction include: 1961 JD 1010RU, 40HP 1955 JD Model 70 Diesel 1974 JD 830A 1952...

I got this Tractor as a barn find only 85 hours. It hasn’t been turned on in years. When I go to turn it on all it does is crank. I emptied all the fuel out of it and replaced it with new. Still does the same thing. All the fluids are full. I pulled off the injector lines and they had fuel but...