issues

hi first post here, i have a 2016 new holland workmaster 33. Recently i went to use it and the red exclamation point light came on and was flashing. it was on by itself. it was NOT accompanied by the regen lights at all. Thought this was odd. gave a general look over and didnt see anything out...

Hey all! STILL doing transmission exchanges to get last of water out. This time, the trans filter (Kubota brand) had failed. The inner perforated tube had collapsed into the center, folding a bit and pulling a glue line off the filter 'top' (with the threads). Bad part, bad tractor? Changed...

I purchased a new 5105M in January and having shifting issues that JD can't seem to resolve. This issue was from day one but JD said to give it some time to "break in". I am new to JD with this purchase so some of my terminology may not be completely accurate to JD standards but here we go...

I have a DK50, around 2001ish, that binds (locks up) in 4WD when going forward and does the same thing in reverse when in 2WD. Any ideas, other than splitting the tractor? I'm thinking it's something with the selector forks but I'm hoping it's something simpler.

I have a small stream on my property that I was not able to cross due to it being too steep and deep. I decided to put a culvert in. Fast forword a few years and I think I am regretting my decision. You see this area on my property is along a creek and floods 1-5 times a year. To exacerbate...

I have 132 Hours on my machine, and a few months back I was using the backhoe and I started to get a high patch whining at 2000RPM. As soon as you move the loader stick it stops but comes back when you let it go. At this point I have disconnected all the lines reconnected everything made sure...

From previous posts I've read I can't find a similar stalling situation to mine. Owned this 4155 about a year has 400 hours. worked great last spring/summer/fall. I went out to plow last week and tractor started stalling. Would start right up again, but this happened about 4 times in 3 hours...

New to this RTV, and this morning it was about 29 degrees. The manual says turn to glow plug spot on key for 5-10 seconds. I only have 3 positions; Off, On, and Crank, so I put it in on position for about 10 seconds and never saw the glow plug indicator light up on the panel and it didn't want...

Update below : Curious, any anybody else had issues they’re not getting resolved, I pre-ordered a full-size skid steer to mini skid steer adapter plate from Titan, the prom I have is with the pin spacing, one pin is welded further rearwards snd the top mounting edge has a bow to it, the person...

Mahindra emax 25L HST Cab I have some intermittent power issues with my cab accessories (front wiper, washer fluid, work lights on front, work lights on rear, blower for cab heat (just the blower)). The issue doesn't seem to effect the lights build into the hood of the tractor, the 4 way lights...

Been thinking about changing tractors as my allergies to diesel smoke have gotten worse and spending time on my JD 3720 is causing some misery. One tractor i've started looking at is the DK6020SE as the size is quite similar to my Deere but the PTO HP and lift are greater. Physically larger in...

I have a 1983 Case W18B wheeled articulated loader. When I start it up, it's not providing enough air to release the parking brake. I aired up the air tank with a compressor and found both the brake pedal and clutch/brake pedal are leaking air from the bottom when the snap ring is. Anybody ever...

I purchased a 2023 Workmaster recently. It was new just has been sitting on the dealers lot. When I got it home, after trying to connect my landplane, the three point would just not go down without significant weight on it. Tough to hook stuff up that's for sure. The sales guy is a good dude. He...

I have a 2000 NH 555E 4x4. The right brake pedal has always been hard to push since I bought the machine, so I generally just use the left pedal. Occasionally I will forget and push the right pedal. when I do this, the right rear wheel will lock up, and it will take a bit to get it free... any...

Purchased a non running 2008 GC2300. Replaced starter, battery, ground strap and bottom radiator hose that had hole from throttle cable rub. Turns over but will not start even after bleeding air from lines. Low compression on two cylinders, 500, 150 in center and 350. My guess head gasket...

Hey everyone - I picked up an old farmall 504 d awhile back. Loader is very slow to lift. There was a lot of water in the hydraulic fluid. Replaced fluid and filter and it did not help. From what I understand there is a oring on the pipe between the pump and filter which could cause hydraulic...

Hello, Hopefully someone can help me with an issue I'm having with my tractor. I have a 2018 mahindra 1526 shuttle shift. The forward & reverse selector has become extremely hard to move from forward to reverse some times it wont even do it. Last time i used the tractor it seemed like once i got...

I have a New Holland TC30 with a hydraulic issue. It seems like it could be kind of a generic hydraulic issue, not necessarily a New Holland issue, so I am posting it here. I have a loader on this tractor. It is not the New Holland one, but it is made for my tractor. The lift capacity for the...

I have had the tractor 5 years. Up til a year ago I frequently had the rpm's up high enough so there was no issues. I let someone borrow the tractor. They didn't abuse the tactor, but was unaware of the regen system. I went to use the tractor after it was returned. First thing I noticed was the...

Long time lurker. First time posting. I'm having issues with putting SSQA brackets on my tractor. The brackets that I bought offline are to short to fit snug in the plates on the implement. They leave about 1"-2" gap on the bottom when hooked on the implements. I have looked and the plates on my...

Hello all. New tractor owner here. I purchased a used 2011 2320 hst with 670 hours. It came with the 62D mower. Today was my first mow with it. The deck adjustment is all messed up, which I guess is quite common. I’ve read through a ton of threads about this but my situation seems a little...

Good afternoon, I am having some difficulty understanding how to properly raise and lower the 3 point hitch, when I watch a video on youtube, The operation is as simple as moving the position lever. Both Hydraulic remote "A" and "B" appear to be in neutral and nothing is attached to the rear...

Have a 1982 Ford 6610 4WD Cabbed tractor. Tractor will not engage into 4x4. It has an electric switch (not manual) and fuses are good. Drained fluid and pulled solenoid checked out good as well. Any other thoughts or ideas on what to check next? Thanks in advance. JAG

I have not posted here for quite a few a years and when I did it was in the Toolcat section. I no longer own Toolcats, but I did recently purchase a 2006 BX1850D Kubota that runs well but is having issues with the Transmission. Very little to no power both forward and reverse. Additionally, it...

Heya crew, I've got a little DS3510 with a starter solenoid issue. Basically: For some time, the 'click' when turning the key to just before start was intermittently happening or not Finally stopped happening at all I think we incorrectly diagnosed that as the stop solenoid because...

Hydraulic filter cap blew off the bottom twice on me. Not sure what the issue is. Replace filter housing and now the steering only goes a 1/4 turn and then stays out hyd oil from the top of filter through thenoring. Any help would be greatly appreciated. Thanks

2023 UW56. When traction control is on it spins the right rear wheel in relation to the other wheels and has trouble driving. When I turn off traction control the toolcat won't move at all or will barely move. Out of warranty. Any help much appreciated.

I just purchased a Summit TX25H and a couple implements. I love it so far but there are a couple concerns I'm hoping to put to bed. I was encouraged to join the Summit tractors connect app, and by all accounts, it doesn't exist (according to Google play). I also went to the Summit tractors...

I like (not really) saving up multiple problems, then posting all at once.....called PT but they are closed this week. Issue 1: There is a recent post about steering issues. My PT425 (circa 2002) started having similar issues last time mowing. Tractor was drifting to the left and steering was...

New here guys. I own a kubota f2400. When I try and start it the starter just clicks once in awhile it'll turn over for a quarter of a second. Any way I can maybe bypass it? I get the idea behind it I just don't know exactly how to do it what points I touch to bypass.

Howdy- new member here. I have a 2400h I bought used and partially disassembled so was unable to drive before buying. Tractor had tore up ring and pinion in rear end. Tore it all apart and replaced ring and pinion. Problem is reverse seems to work ok but having issues going fwd.. There is no...

My dad just bought a 2014 6140d with cab and a loader from a dealer. It has about 1820 hours. Having some issues possibly with the transmission, clutch or brakes. It has the 12/12 power reverser. This may be a little hard to explain especially without a video. When I push the clutch all the...

Have a 2001 JD 4300, runs great but recently bought a stump bucket, when forcing bucket into ground to remove stumps of scrub oak, tractor seems to not have enuf power, runs good but won't rip up roots, I'm thinking either the hydro pump, possibly a bypass of some kind or possibly low hydro oil...

2006 DK55 is having intermittent starting issues. Sometimes it starts right up, sometime it takes a couple tries, sometime I try 3 or 4 times and give up and get my other tractor. There is no rhyme or reason to it. Fuel filter is a year old and I only use fuel from a 5 gal can. I don't think...

Long time , since I've posted ,but that just shows how good my Foton has been after 1300HRs.. anyways As i was getting ready for Tilling season , I went to tighten up the Shuttle shifter. to my surprise as i tapped up the remove the handle from the shaft the whole shifter came up !!.. and...

Hey everyone, I need some help with this tractor that I got at auction recently. I bought it through an online auction. For the auction, they had a video of the tractor running and moving around under it's own power. When I go to pick up the tractor, it won't start. I crack the bleeder screw on...

The left track of my excavator (Kubota KX41-2V) does not have enough power to make a turn. I replaced the left final drive but that didn't solve the problem. So I connected an extra set of hoses directly from the control valve left travel section to the drive motor, but no difference. The...

Afternoon everyone, Recently discovered after doing some spraying that my tractor died. Checked the battery and it was dead, this is a new battery, less than 6 months old. Charged the battery and got it running and checked voltage across the battery, was only charging at 11.6v...checked the...

Hello, I'm needing a service manual for my 2006 Montana 4940C tractor. I'm having PTO issues. Thanks. My email is mtwz71@yahoo.com

Started baling today and the hydraulic tensioner will not get tight (bales loose) then it started shooting oil out the gauge. Help!! I can't find the book and my dad passed away in December so I can't ask him.

I need some help diagnosing a recurrent issue with my front final end drive on my MFWD T4.75. The sun (part # 5191412) & planetary gears (5165273) housed in the hub locked up somehow resulting in the planetaries loosing some teeth and the sun gear ground completely smooth. The Hub (87542225) was...

Looking at a Yanmar YM330D with 1600 hours. 4wd doesn't work and current owner bought it that way and doesn't have any info. Im new to tractors but not to mechanical work. Question is how hard/expensive would it be to fix the 4wd? Asking price for the unit is $6000. I know Im not giving much...

Hi all, hope one of you can help me. I have a 1994 555D Ford backhoe and when I have been using it anywhere from 20-30 min the shuttle shifter stops working and it won’t go forward or reverse. After it cools down it can be used again…. What is causing this? It’s a real pain and can’t get much...

Ford 555B Loader Backhoe takes a long time to get moving. If anyone has answers that'd be cool. If the tractor is cold, even when put into forward, and with the rpms raised (or not, doesn't matter).. doesn't move. I've watched my father sit on this thing for 10 or 15 mins waiting on it to...

I'm about to embark on trouble shooting what I think is my clutch since it doesn't seem to engage much and then only in low gear. Anyone have any tips on what to look for or where to best get a replacement clutch before I split it open?

Our American Legion Post received a 2007 Cub cadet GT3200 with 102 actual running hours on it as a donation to sell for our MIA Memorial construction fund. The issue we are having is that the mower deck and 3-point hitch cylinders will not move up or down. The tractor drives in both directions...

Our tractor has a starting issue, when starting, we turn the key to engage the glow plug when it goes out we then turn it to start sometimes it clicks twice then starts sometimes won't start. We replaced the battery ( 8 yrs old) and starter ( original) and still does it! Any answers? Thanks in...

My Farntrac 25H has only 22 hours,,it is hard to shift into and out of gear most days...hard to get into neutral if tractor is running,,,is there a site or link where i can buy a actual repair manual so i can see how to adjust linkage

I recently began having problems with my Workmaster 75 feeling like it was down on power. It's mostly noticeable when I'm pulling equipment on on an incline. It has a hard time keeping up RPMs and if I'm in a higher gear range it really struggles. I contacted the dealer who came out and did a...

Hi all, First of all, i'm very glad to have found such an active community discussing even the most niche of tractors :) I'm sure that with the help of you guys, any issue can be fixed. A little history on my little Suzue, i've bought it a couple of weeks ago. The previous owner told me it ran...

Bought a Satoh S650G the other day and while unloading it it ran low on fuel. Refueled with good gas and now it will just crank, fire, run a second and die. But then after about 10 tries of this it ran fine enough to load up a brush hog on a trailer. Shut it off and it did it again. Any help is...

Good day We recently bought a secondhand Massey Ferguson 165 tractor (year and hours unknown). The tractor is fitted with a MK2 hydraulic pump. The lift or pump however do have so issues. When we try to hook and pickup/lift heavy implement (slasher) the tractor does not want to lift the...