Search results

OK thank you ill have to dig around

Do you have a picture I pull the two black covers off that are held on with 2 little screws. It faces away from tractor. They where full of mud but there springs on the out side. And the end look like hex. But like I can change anything . Washers or do I turn the whole black cover to...

Thank you aww I thought that be it but I was hoping I didn't have pull a cap off. hoping for a screw and not shims

I have lots of hydraulic stuff I was aircraft hydraulic mech then worked on my Large excavator and bulldozer. I'd like to know what kind of work is involved before. I really dig into it

O that annoying where is it at and is it a lock nut or do you need to shim it ?

I'm looking to see where the relief pressure valves are for the front end loader on a branson 2016 4720h The bucket will bypass way sooner then the load arms. Where are the adjustments for the different Hydraulic components

OK I was hoping to not have to dig into the dash

OK there 3 wires coming out the back of the alternator which one need to have 12 volts to make hour meter work ?

Ugg what a pain the tach works fine. So it has To be the back of the hour gage or the hour counter. DC and water eats wire AC and water doesn't eat wires but shocks the hell out of you Thank you guys for all the help I love the tractor and hate to sell it but life happens. This site has...

OK it was a ground issue rust and some cracks fixed the fuel Guage will know more when I fill the tank. OK what about the hour meter how's that thing work

2016 branson 4720h about 400 hrs was in a flood the fill everything with sand and mud. I drained and cleaned it but it would plug up filter every few hours so I would have to change them to keep it running it had a bucket loader on the full. Dented and bent up from floating into stuff...

I have a Branson 4720H and the fuel Guage stopped working right and the hour counter turns on but doesn't count. So what makes it count the hours

I got the radiator from the dealer and everything seems to be working good thinking the rad cap just didnt release like it should have

Finally got the radiator in and started mowing again it seems to be working fine . Going to Checking on the hyd system as the steering seem jerky not sure if not sure its a vacuum leak or a plugged fiter.

Well no luck with the dealer and the rRadiator place around here won’t even mess with the plastic tank ones

Yea im very worried about the head or head gasket . But need to get the Rad fixed first to then find the other issues . im going to call the local dealer then go from there. if any one knows of a good replacement

Thank you guys ill be calling and try to find part monday the 5th of july hoping places are open

Im hoping to find a all metal one for it

So i was mowing the field today it a hot one 106 any ways tractor was running a little hot as i was heading in to wash out the Radiator. The Plastic end cap of the radiator popped off guessing the Radiator cap Was stuck closed. The temp gauge was hotter then normal but not in the H area . As...

at work we have restrictiors with a knob on them and you turn it to slow or speed up the hydraulics has anyone done this on a brason loader?

Post some pics . did you get it fixed?

branson 4720H leaking steering doesnt seem to be leaking around the chrome rods but back a little bit on the body of the steering oring ?

Well the Branson 4720h got hit hard in a flood first thing I did was drain oil in engine very little water in there. Then I drained the hyd fluid a lot of water drained that and pulled filters. Well I was driving it around to help clean up and move things. It痴 slowed then stopped moving. I...

is the mounting base the same on the gx390 and the gx690 ? whats the over size looking at the front of the 690 Height width and dept ? can you get them in inch output shaft ? pull start ?

I called and paid for filters /10 gals of hide fluid told them the tractor i have 4720h 2014 or 2015 maybe 2016 year but i doubt it. picked it up today they gave me oil filter and 80w-90w gear oil . i gave it back and told them i need hyd fluid. im pretty sure they gave me the right hyd...

Does the Branson hydraulic fluid hold water or does it settle out ?

Towards the right side almost directly under the loader Control joystick on the bottom of the tractor is a hydraulic filter just forward of the hydraulic filter is a line going to the front of the engine with a small rubber hose that connects two metal lines with two hose clamps one of the...

Has any tried to put a Hydraulic motor on a Badlands winch a one of the 12-15k Electric winches. Not sure if I want to try adding another alternator or adding a hydraulic motor to the electric winch by removing the electric motor the electric motor is a 6.5 hp what would be a good equivalent...

I have a Branson 4720H I changed engine oil and filter. Also Trans oil and filter at 50 hrs with Branson hydraulic oil and T6 15-40 oil Was I suppose to just change filters at 50 ? How many hours should I change oils at ? How long do you run your oil or hyd fluid ?

The rear wheel different lock is behind your foot where the forward and reverse pedals are you can step on the rear of lock? But then you can稚 push on the forward or reverse pedals What Am I not getting in this situation?

I have a 5 foot box blade on a Branson 4720h It痴 not cutting real well and Is losing traction on the rear tires how much weight would be the minimum to put on the box blade to make it work better? Thinking about building a metal box that I will fill it with concrete but I want to keep it off...

Any one own a Maxxd trailer ? looking at getting a very heavy duty goose neck the dealer near me sells maxxd looking for info on them.

Looking for the linkage that connects the air cylinder to the back latch assembly of a dump truck or dump trailer that is and over camming linkage so when the latch is closed and no air pressure is present it stays latched Looking for ideas where to buy been googling it for weeks.

I have a Bunch of hydraulic hoses and seals to fix on a backhoe. Most hoses and fittings. plus I have a bunch of hoses and a weak hydraulic pump on 12 yard dump truck. Looking for a place I can get a Catalog and order stuff online i live out in middle of know where east Oregon

I got a old Cummins small cam it leaks some oil but going to change the filter and oil. Unsure what filter to use the one on it is a Napa gold 1970. What to know what other filter I can use that would be better ? Also what oil to use as I know the small cam Cummins had cam issues and not...

The tractor is a 4720h with a pretty nice seat while i was changing the oil and when i went to move it the seat was broken. the adjuster front center knob broke off and now the seat is all the way down . the seat looks new dont want to buy a new seat . im also 260-280 lbs so maybe that help...

I finally hit the 50 hour all fluids Change for my 4720h what should I buy ? What hoping I can buy 5 gals buckets of fluid that will also work with my old case 680 backhoe but will buy anything I need to keep it runnning What is everybody here running ?

I have a Branson 4720h with the loader on it . I have a bunch of river rock to load it痴 not packed just loose it痴 like driving on mables looking to move a bunch need ideas. Wondering if I add bolt on teeth if it would help take some of the load off the bucket and reduce the wear on it ...

I'm looking for a fast way to pick up leaves,pine needles from 14 acres. I would have to hook it up to a brush hog mower. I would mod or weld a opening to it. It the spring time could it be used to make silage with grass cutting if I bagged them from the Hoper? Anyone one ever try this ...

A 2016 Branson 4720h does it have a clutch in the transmission ? Using Tractor in 3 gear a lot will that wear out the trans faster I can hear it bypass hyd fluid some times? Or is it like a car with a Torque converter

I'm looking to buy one of the metal bins with a bunch of slide out drawers that has an assortment of nuts bolts washers lockwashers clips pin it's all labeled and individually compartmentalized I've seen them in the old auto shop I worked with and we had them in the Marines. I live out in...

I use and run a lot oh heavy equipment at work from trucks to loader skidsteers, dozers graders all kinds of things. I was really worried about buy the branson but after hearing from a few guys i did and i love it. Its really is a very good and pretty heavy duty tractor been putting a lot of...

Looking for any info and if this is a smart decision how have the 2016 Branson's been running. Are they planning any big updates in 2017 for the tractors

I have about 20 acres id like to put fertilizer down on. I brought 16-16-16-7 to put down just around the house and front yard areas. but it cost about 150 bucks for 3 bags and i put it on light . How do you go about doing small amount of acres with out going broke ?