John Deere 3032E. PTO will run at idle but any other RPM and it shuts off unless you activate the hydraulic circuit.. Eg.. loader control, 3 point. Very strange. Anyone else have similar problem...

Yes, a follow here who does actions and brings them home, then sales them has a 2020 John Deere 3032E FS here will 600 some hours. Asking 28K as you see in photos.

My 2016 3032e tractor is showing after I had to change the battery. It will crank after taking the battery cable off and putting it back on resetting the system. Giving it me this code. When u...

Had an error message of neutof on a John Deere 3032e. I read some forums where it was suggested to jumper the line and bypass the Neutral Safety Switch to verify it was faulty. I did that but...

How does one add cruise to this unit?

I have a 2019 JD 3032e that will not turn over. I used the tractor on a Friday afternoon spreading road base and trying to beat a storm. I put diesel in parked it and left the fuel cap off so I am...

Can you guys tell me some info about this model? A quick google search doesn’t reveal any GLARING issues, but thought i would ask the experts…. thanks in advance……

My old JD 1050 is causing me fits....time to think about replacing it (new tractor-itis). My local dealer has a 2021 used JD3032 HST with loader at a decent price, less than 50 hours. I haven’t...

M buddy has 3032E, the rear lift is not working crrectly,,it is either all the way up or all the way down,,any ideas what the problem might be or what can we check,,thanks advance

Going tomorrow to look at a used 2015 JD 3032E for my son to use on his property. I currently have a JD 770, and have been happy with it. It has been reliable and trouble free. My question is; Is...

I have a 2015 JD 3032E and it, up until now was a dud. Back to the dealers at least 12 times before 500 hours, (700 on it now). It was so bad they extended the warrenty to 5 years and 1000 hours...

Saw a listing for a 3032e, looks to be about what i need. What is a reasonable number of hours on a tractor like this? I would anticipate my own usage to be fairly light. Just looking for...

I have a 2015 3032E and it is just now out of warranty. I do my own repairs and have done so on my Case 580SE for years. I know that there are many different manuals to select from, $350 down to...

Hi folks, I just bought a new-ish 3032e from the dealer. This is my second tractor and first JD. The first thing that struck me was the exhaust fumes from the diesel which unfortunately makes me...

First of all, I am new to the forum posting but been a lurker for a number of years. I am a hunter and will be upgrading my tractor this year from a 1950 ford 8n to something new for food plots...

The pto on my neighbors 3032E won't engage. My knowledge of these newer tractors is limited. I suggested cheeking fuses,seat switch,pto switch. Does this tractor have a pto speed sensor? Thanks,Jim

Are their any upgraded seats that will fit the 3032e? I have a bad back!

I know that the drawbar on a 3032e has a vertical load capacity of 882 lbs. does anyone know how much I can pull with this drawbar

I know that the drawbar on a 3032e has a vertical load capacity of 882 lbs. does anyone know how much I can pull with this drawbar?

Is this an acceptable deal? 2018 Deere 3032E HST with a pinned 55" rock bucket, pinned pallet forks, turf tires, Rim Guard, and a draw bar for $20,000. I am assuming there is no sales tax for a...

Looking for something with a hydro transmission to primarily run a 5ft brush cutter and a 6ft finish mower with some grapple work on a front end loader. I grew up on a Deeres and still have my...

Wow, 54 views and no replies. Please disregard the post below. I found a source for a TSM ($95/CD). Should take about a week to get it. **********************************************************...

I would like to know where the prv for the 305 loader is so I will be able to adjust it when I get my gauges in

Hello, new member here and hopefully my questions have not already been asked many times. I have a few questions so bear with me. Anyway, I had a 2014 JD 3032e that I bought new to use around my...

I have a 2013 3032e that has performed flawlessly since new (262 hrs.). A few weeks ago it would not start, I found a dead battery. I gave the battery a charge, the tractor started right up, no...

So I have a paid for 08 3032e with a 305 loader, 400 hours, looks showroom. My buddy is selling a 03 4310 with a 420 loader, 437 hours, stored outside so she’s faded and a little, functions...

My first post! First off, I appreciate all the helpful info on here. I've been reading and doing my homework. We have 17 acres riverfront wooded acres that we want to build a cabin on. We had...

Hi, just figured I'd give a novice tractor owner's review of the 3032E I just bought a couple months ago. First off I picked up the tractor with FEL, R1 tires, and Frontier 60" rotary cutter...

Alright guys, I thought I had my mind made up to buy this extremely clean 2014 JD 3032E with only 90 hours and still under warranty. The tractor literally looks brand new and the owner has never...

Alright fellas I'm thinking of selling my 2305 and getting a tractor and a zero turn. The tractor will be mainly a firewood tractor that needs to have the lift capacity and height to load my dump...

I am frustrated with this technical manual. I have a 610000+ serial 3032e, and the TM127919 manual. The fuel filter info listed in the tech manual is WRONG. It references the old style Tiere 3...

My PTO won't spin, I pull the switch and nothing. The light comes on but nothing. I tried to turn it manually and it would not turn.. It seems to be locked up... I have not used it since the fall...

Time for a new tractor. Trying to narrow my choices down lately and have found both a 3032e and a 3320 that are both in great shape. Specifics: 3032e is a 2016 model with 60" rotary cutter, 60"...

Grapple, third hydraulics, 12 volt outlet, quick hitch, storage basket, and mailbox to store chains.

New to this site but have been lurking researching here for some time. Was planning on getting a Kubota, but ended up with the John Deere 3032e earlier this week, for not much more than a Kubota...

How much should I expect to pay for a 3032e with a fel and 60" cutter?

Hi Everyone, I am new here and have a question would like get your thoughts and suggestions. I have a 2016 JD 3032E with D160 FEL. I am going to add a grapple to the loader. For the 3rd function...

Will the 3032E's 25 PTO hp run the MX5? That is the minimum for the cutter. Anybody using this setup?

John Deere 3032e D160 loader third function Hello, I have a JD 3032e and would like to add a third function kit and grapple. Most likley will get both from Everything Attachments. I'm having...

I was wondering what everyone thought about trading a 2007 JD 2305 with under 300 hours for a new 2016 3032e. I am looking for a little more tractor but still want to stay small enough to get into...

I have a 3032e that is not engaging the PTO when the switch is engaged. I have replaced the switch, checked the fluid, checked the safety switch under the seat and nothing.I have removed the...

Hi all, I'm new to tractors and pricing out my first one... I'm looking at all the major brands, trying to get a sense of comparable models across brands. I'm generally looking in the 25-35HP...

Hello all! Looking at a John Deere 3032e or 3038e. Just the right size and plenty simple. The problem is that all the reviews mention that you cannot take the loader off. Then I found out that...

I have owned my JD 3032E with the Frontier LP1172 land plane for less then a month. I noticed the other day when I turned on the tractor and raised the land plane off the ground it was pulsing. It...

I have a 3032e john deere that needs a 22NF 500cca battery where can I find one all I can find is a 390cca

I have a friend that has a 3032e that he bought new. He absolutely loves it, but the bucket droops. The loader raises and holds just fine, but the bucket tilt will not hold position. Has been...

I am considering adding rear hydraulics for snow Blower chute control as well as other attachments , part number BLV10461, dealer tells me 3-4 hr install plus since I'm about an hour away an...

Hello all. I have a 3032e. I will be adding a grapple to the loader, so I will be in need of a 3rd function for this. So I am looking for input on how to get this done. I was looking at the...

Hello all. I have a 3032e. I will be adding a grapple to the loader, so I will be in need of a 3rd function for this. So I am looking for input on how to get this done. I was looking at the...

Hello all, I just joined and am making my first post. I have ordered a John Deere 3032E and a Gator today and would like to see if I got a good deal on the tractor. I paid $13988.00 new out the...

New to TractorByNet - appreciate the insights.. .. and details anyone can offer about hydraulic/transmission oil capacity on the noted John Deere model. The specs in the OM say 12.3 litres (13...

So I've heard an ad on the radio from a local dealership offering a John Deere 3032E with FEL and tiller for $221/month. This sounds like a great deal. When I called the dealer, they were unable...

Hello to all. Just purchaced a nice 3032e and am looking at the Wildkat econo grapple. Here is my question....Does the grapple mount to the D160 loader once you remove the bucket? Or am I...

I've got a 3032 about 3 years old with 135 hours. My problem, when I use the hydrostat pedals and release to slow down the hydrostat doesn't immediately respond, rather keeps moving forward for...

I was out brush hogging Saturday and needed to apply the differential lock. I heard a pop when applying it. Kinda like a gear bang maybe. Just did it once and never heard it again. I was kind of...

Today I was out doing some spring bush hogging with my 3032e and a king kutter 5ft bush hog/brush mower, when suddenly it sounded like there were three gunshots and a looked back to see ALL my...

I ordered the JD 3032E maintenance kit from Green part store for $89. I never thought the kit would be cheaper than local parts store Wix filters. But I bought the whole kit including both air...

Just put on a Winter Cab (Original Tractor Cab) from Green Dealer and have some open areas on floor around seat (Right, left and behind) any ideas to enclose these areas to make cab a little...

Hi guys. First time poster. I am in the market for my first tractor. I've narrowed my decision to 3 models. The 2032r, 3032e or the 3038e. Looking at the numbers, I can't see the advantage of one...

I have JD 3032e tractor that I pull a 6ft. finish mower with. Last time I tried to mow, as soon as I pulled the pto switch, the engine dragged down and stalled. I disconnected pto coupling to the...

Trying to add a grapple on my 3032e Deere looks simple to just tee into the lines and have a manual control valve but I am missing something because in order for grapple to work I have to work my...

my tractor has a problem starting turn the key the starter does not kick in took it off tested it it was fine check all fuses relays all the safety stuff cleaned all grounds cables it will not...

I[ATTACH=C So far it has 21 hours on it and is running strong.

I got a quote for a 2014 JD 3032e w D160 loader (305 loader is 2013 earlier) $18,300 Frontier RC2060 rotary cutter but has all the options slip clutch, chains and solid tire $1,600 Frontier BB2060...

I'm new to all this, buying my first tractor and am trying to decide on which of these three machines to purchase for a 40 acre mini-farm. Brush-hogging / mowing / bucket use, etc. I think I...

I am new here. I have a john Deere 3032e without hydraulic remotes. I want to use a log splitter 3pt. JD wants $889 for the kit to add remotes. Is there any chance I could do it a little more...

Would Diesel from Exxon work in the JD 3032E New Model?

Hello, This is my first post to the forum and I am looking for some advice. I recently bought 6 acres of property and it is all grass. There are some considerable hills to mow. I had the JD...

My family operates a small horse farm and have been using a JD 3032E tractor for roughly two or three years with very few incidents. I come to you today for help, advice, and a general hope that...

I am considering replacing/upgrading my 3032e and am looking to TBN for input. I purchased it new about 2 years ago to use on my 8 acres. Right now, I just have a pole barn and use the tractor to...

I finally got a good start on my homemade cab for my JD 3032E this week and thought I would share my experience as I got the idea and courage to do it from this site. After my neighbor took...

Hello, I'm new here and just recently purchased a jd 3032e. So far i am very please with the tractor and have had no issues. However, I would like to be able to increase my FEL lifting...

New John Deere 3032e only got to use it 2 times so far. 3 hours on it. Ready for spring so I can use it much more.

I got a call from my dealer saying they received a "product improvement notice" from JD on my 2 year old 3032e for a new fuel delivery valve. They are going to pick it up, install the new part...

Just inked the deal on a new 2013 3032E, Dealer is asking me if I want a Quick-Coupler for the 3 pt hitch for the implements. I will be getting a brush hog and blade with it. Thoughts on this...

Hope someone can give me some suggestions on something I might be missing. I have a 2013 3032e with 30 hours on it. I started it the other day, worked for a short while and shut it off. When I...

I just bought a John Deere 3032e. I have a woods bh 6000 backhoe from my old tractor. I was wondering if I could build a sub frame that would work on that John Deere or would I be better off to...

Hello everyone. I am in the market for a compact tractor. I have JD, IH and NH dealerships very nearby (4 miles) and have spoke with each of them. The JD dealership has a new 3032e with loader...

This is my second post. I parked my perfectly running John Deere on a slight slope when the fuel was low. Tractor running fine when I turned off key. When I attempted to restart I noticed that...

This past weekend I was able to do some side work with the 3032e. A guy had two black walnut trees he wanted down and in exchange I got the wood - done. While I was there he mentioned that he...

Which one seems like a better buy? I just need a loader and 3ph. Opinions???

Hello. Quick question. I need to spread 5 tons of lime over 2 acres. What is the best way? Do you think I could pull one of the spreaders that coops rent out? If so, how much lime could it pull...

Looks like a green fluid and is dripping very slowly where it is bolted together on left side of axle. I called JD today and they said it isn't in warranty because it is over 2 years. Anyone have...

How do the 3032E and 3038E tractors cope with moving and loading round bales? The specs look like it could be touch and go. Does anyone use their machines for handling round bales?

I have a new 3032e with loaded tires, 305 fel and a 6' rotary cutter/bush hog. The tractor weighs about 2100 lbs. I would guess the loaded tires add 600 lbs and the 305 fel is around 700 lbs. The...

Wondering what you all think. I'm going to load the tires here shortly. I have a small king kutter disc but I'm looking for something heavier duty. Looking at both 3 point and pull. What do...

Mods, if this post needs moved, please move it to the correct location. About 6 or so months ago, I got an email from TractorbyNet asking me to do a review of the 3032e I purchased in May of...

My recent post on the 1026 was loaded with very good comments by all of you. I greatly appreciate it! Having considered all of that......I tried the 1026r at the closest dealer (80 miles)...

Quick question: What is the lift height range of the 3 point linkage on the 3023E and 3038E tractors. I can find capacity, but not lift height. I'm wondering if I can lift a round bale of hay...

Went out to the property today and found that the light switch had been left on and drained the battery completely. After charging it, the JD 3032e wouldn't kick over. It seems that the starter...

One of the shortcomings of the 3032E is the inability to use the PTO to power a log splitter, wood chipper, etc. without having to over-ride the seat switch. Some use a sand bag on the seat...

I just wanted to give an update, as some may know I traded in my 2320 after a major problem and purchased my 3032E. It took a little time to get use to the fel control verses the 2320 due to the...

Curious if anyone know what this may be. Childeren went out and hit the switch the other night. Drained the battery. Once the batter was charge the tractor would not start. Noticed that the...

Just sold my JD 850 gear and purchased a new Kubota, did some extensive research comparison between the JD and Kubota before making my decision, just wanted to share some of my observations...

I have a quick question for everyone out there, I recently traded my 2320 in on a 3032E I ended up with a deal on a used one with only 34 hours and only 6 months old so part of the deal was for...

I have a JD 30032e and with 38 hours and the tachnometer operates irracticallly. Been going on since about hour 5. Sometimes it works and sometimes it does not. It is under warranty, but if it...

anything I should be aware of, or look out for? I have a 1950 8n for the last ten years. Is the john deere as tough as that old ford?

If I raise the front wheels off the ground with the FEL, and engage the FWD and put it in gear (HST) should the front wheels be powered even if the back wheels are not moving? I suspect my fwd...

Hello all, need a little friendly advise I was looking at getting a new 3032e as a matter fact I was going to go ink the sale on Monday, my dealer called me today and stated that he just had a...

OK, well it looks like I am going pull the trigger and get the 3032E and trade my 2320 due to major damage to the rear and tran.'s my question is that I have had alot of people tell me to get the...

Just wondering which deal you guys thought looked better. John Deere 3032E Tractor- 12,359.09 John Deere 305 Loader- 3,496.76 Frontier Grooming Mower- 2,100.00 Frontier 5' Tiller-...

Just wondering if you guys think this is a good deal. I think I have decided to move up to a bigger tractor. John Deere 3032E Tractor- 12,359.09 John Deere 305 Loader- 3,496.76...

OK, looking for input from others that have had any experince with 3032E, I am currently going to trade my 2320 due to an castrophic accident with the trans.'s Deere is going to cover it but I...

I found this on Craigslist and am not sure if it would fit on a 3032e. Does anyone have any experience mounting a blade to the front of this type of tractor? JD Model 380 Blade

I'm in my third season with my 3032e, coming up on 300 hours. I'm a rookie to modern tractors and bought it new without the benefit of the good advice on this site. My decision was influenced...

i'm starting to think i chose the wrong tractor.my jd won't be in for another week and no money has changed hands.since i found this site and done some reading between the jd and kabota,i'm...

New to posting on the forum, but certainly not new to reading and researching. Recently moved to Wyoming about 6 months back now. Got me a little 10 acre place and needed a CUT to keep the field...

K dealer quotes 17.4K plus tax for the L3200 HST JD dealer quotes 17.3K plus tax for the 3032E, but includes Frontier RC2060 rotary cutter These seem to be the going rate. Are there better deals...

Hey everyone, new member to the site but have been reading on it for a long time. Figured I'm ready to buy so I'd ask the questions now, hopefully I can get some good guidance. We're looking at...

Looking at these two tractors. Please give advice on which is a better tractor in the long run and which will have a better resale value say 3-4 years down the road. Have 2+ acres to mow. Main...

All, Just bought a 3032e. Wondering which grapple you all think would be right for me. Got the extra rear hydraulics. I'll be clearering blow down pines, moving rocks, cleaning up logged land(...

Thanks nirion for posting the details of your deal. I wanted the same thing and got it. I also added the rear hydraulics and the coolant heater for another 875. I thought it was a pretty good...

I have a 3032e John Deere Tractor that will not hold throttle lever when it is moved to increase RPM. This is an orange lever on the right side of the tractor dash. I have checked the linkage and...

Just bought a 3032E and was wondering if anyone has had experience with the Frontier WC1103 wood chipper? I have piles of brush/thin limbs off trees with diameters less than 3 inches. Am...

After researching on this forum and input on a previous thread, I have pretty much decided to with a new 3032e instead of a used 4310. Warranty and 0% played a major factor in this. Here is what...

Just bought a JD3032E & love it except for the fumes. Has anyone seen one modded w/vertical exhaust? Is it any better? This is my 1st tractor. Thank You, Dave

Although I really need a larger tractor, I keep coming back to the 3032E due to price and small size (we have some tight areas between pens that a larger tractor may have some issues getting...

I'm planning on purchasing a tractor very soon (as in I need it yesterday). For my location, based on the dealerships close by, John Deere seems to be my best option, and out of the lineup it...

I am looking into getting a newer Deere, as we are planning on building a house this year. It is currently 4 acres (flat in central OH with almost no trees), but could expand to 10 at the same...

Hi everybody.I was on the way to work the other day and had to stop in and get gas .While i was filling up a truck had pulled up to the pump next to me and had a 3038e on a trailer.So i asked him...

so confused. Been talking to 3 jd dealers and one is pushing the 3005 saying that be honest with me and that the 3032 could not do what I want as the 3005 could such as pick up hay in the rear...

I am about to buy my very first tractor - JD 3032E. Just want to make sure it will pull my arena drag....that will be its main purpose. I have a 7ft round arena werks style drag. Should this be...

I WILL DO MY BEST IN GIVING THESE INSTRUCTIONS AS REQUESTED IN EARLY POST SO BARE WITH ME PLEASE.THE 2 GAUGES I BOUGHT OFF EBAY THEY ARE THE TELEFLEX AMEGA SERIES THE OIL PRESSURE PART NUMBER IS...

As the title says, I've narrowed my choices down to a John Deere 3032e and Bobcat CT235. Their prices are pretty close with the Bobcat coming in a few hundred dollars less. Both tractors have pin...

Hello, My local Calgary JD dealer quoted $18,799 + GST for the JD 3032e with 305 loader. Is that reasonable? According to the JD website, the MSRP for this setup is $20,274 + GST. On the surface...

I know you can buy a kit for this (about $750):( from John Deere but I was wondering if anyone has done this without buying the kit and just making their own with parts and hoses from supply...

Hi everybody I would like to update my review of my 3032e. My previous post was a while ago. I now have 56 hrs on it and can't complain one bit .It did have to go in for warranty work for a...

Hey guys, I need some opinions on the John Deere 3032E and 3038E tractors. I am considering one of these model tractors. It will be used for brush hogging w/ a 5' mower, boxblading a long drive...

I have an electrical problem with my 3032e. Dealer said it was a dash board problem after 4.5 hrs of testing (whatthe heck? it took them 4.5 hrs to test a dash and fuse panel? and charged me...

Hey all, I'm trying to decide what tractor I would like. I have decided between the 3032e and the 2520. It will come with an FEL, and no other attachments at this time. I have 4 acres, small...

I all, Just want to say hi to everyone. I am a new 3032e owner with a front end loader. I am very very new to the tractor world so any and all tips would be great. Thanks and I hope to have...

Called all my local dealers and the best quote was $13,500. No negotiating has started.I think that is still high and am not going to buy unless I can get them under $13,000. What say you? Thanks

First off I would like to say hi to everybody this is my first post but have been reading forum for the last couple months. Well I pulled the plug on a 2011 john Deere 3032e with fel and pallet...

I know this has been discussed over and over, but obviously my 'search' skills are wanting and I can't find any of the discussions. I remember reading here of someone who had loaded the rear...

Hello to all, I've done quite a few searches here but still having some trouble making a decision so I decided to post another comparison like everyone else...:laughing: I own 60 acres of woods...

Noticed today a film of oil on the 'canister' on the left side of the tractor directly behind the FWD controls. The canister (looks like a spin on oil filter, but is painted black with no part...

Hi everyone great information here, it's been very helpful. Looking for any feedback you might be kind enough to offer. I'm sold on Deere because the dealer is close and has been pretty helpful...

My SIL is considering a bid he got for a new 3032 tractor with r4 tires. It has a 305 Loader, Engine Block heater($73), 3rd function Hydraulics($749.), Draw Bar ($132.). Dealers price is...

My SIL is considering a bid he got for a new 3032 tractor with r4 tires. It has a 305 Loader, Engine Block heater($73), 3rd function Hydraulics($749.), Draw Bar ($132.). Dealers price is...

Do you think a 3032E would be able to pull a 2bt 14" plow. Got a opprotunity to get one very reasonable, but would like to know if you all think the tractor can pull it ok..Not to much clay in...

hi, When I 1st got my 3032E last fall I checked out all the knobs and levers to make sure they worked and to learn what they did. I remember tightening, by hand, the drop/lock valve to slow down...

getting ready to order my new 3032e.have 16 acre mini farm.Am I making good choice.

Need some advice Need some advice...Im replacing the trusty 8n with the following attatchements..6' box blade, and 5' brush hog..Most of the work would be the usual front loader work ,brush...

Some background about me. I am a guy that does most of the repairs on my cars, truck, home, guns, bows, boat, bikes, etc. on my own. With that said, I'm also an attorney/CPA in the middle of busy...

I just bought a new 3032E and have put about 10 hours of moderate dirt work and bush hogging on it. I noticed that the bucket has a little "slop" in it. Like when i'm going over rough terrain with...

Did anyone that purchased a L2800 or L3200 consider a John Deere 3032E? I'm finding the John Deere to be $1000+ less, which I did not expect. Do you think the 3032E is a comparable model to the...

I am looking into a rock bucket for the 3032E with 305 loader. Do you think the 66 inch John Deere rock bucket is too large for this loader? Do you know of options for a smaller rock bucket...

I just bought a brand new John Deere 3032E diesel and noticed there are pink spots in various locations on the snow where I have run the tractor. I just got it back from the shop and they said...

Hi All, Can anyone give me the scoop on these two tractors Walter

Here is the best cab option I have been able to find for the 3032e & 3038e. It looks pretty good but it is expensive (well over 3 Grand US). I thought I would post this up here in case anyone...

I have found two tractors that are very similair and the price is only $500 for the 3120. They are both still under warranty wiith between 250-300 hours on each. They are both 4wd, R4 tires, hydro...

This model JD3032E with loader , and NOTHING ELSE is being sold off by JD Australia due to a dead market here. The price is good , trust me on this ( dollar equiv thesedays , by the way .. ). They...

trying to decide between a 3032e and a 3038e price difference is around a $1000.00 more hp is nice but not having a turbo (3032e) is also a good thing. How is the torque on both of the tractors...

I'm a new owner of a JD 3032E with a couple of questions. I could find nothing in the owner's manual or the archives of TBN about them. This is my 1st tractor with HST. When I let off the go...

I have about 15 acres to bushhog on some pretty steep ground. I also have a few projects in mind for a FEL like clearing saplings, brush, and light landscaping. I have done quite a bit of...

I am looking at the john deere 3032e and the 3038e tractors Also thinking about the bobcat ct235. My questions about the john deeres are how much to get the cruise control and can you set any...

On the 3032e... Does cruise control work in reverse.?? Does the 3032e come with the knob valve that adjusts how quickly the 3pt. hitch drops.?? Both of these questions would be the game changer...

We are looking to buy a tractor for our horse property (5 acres). We are considering the John Deere 3032e or the Kubota B3300. They are very similar in price (the John Deere is actually several...

For some reason I've been on a roll with expanded metal lately. I like to carry around two or three lengths of 5/16" chain for all-purpose use, but lacked a convenient way to carry them. Since...

Compared to most of the projects on here this one is pretty insignificant, but I'll post photos anyway. My new little JD came with a decent grille guard frame as standard equipment but the first...

My tractor has started stalling after it get's warm. Cold it runs good for about 1 to 2 hours. It always restarts and will run for a short while before doing it again. I changed fuel and both air...

Took the new 3032E down and had the rear tires loaded today. I had them use a weaker than normal solution of calcium chloride--25 pounds of cc in each tire mixed with 35 gallons of water (no...

Have been checking out these models and can't figure out a couple of options on them... hoping someone can help: 1. I believe they're identical in size, including tire dimensions. Correct? 2...

I am currently comparing the John Deere 3032e to a Kubota B3300SU. Test drove the Kubota today and really liked it. Both are within a dollar of each other as priced. A Deere dealer is five miles...

I am having a real hard time picking a tractor. I want a tractor, loader and backhoe for now. Possibly a tiller, rotary cutter and chipper down the road. I have a some lot clearing to do so I...

I need some input...I am buying a tractor to do four main things: 1) finish mow my 2 acre yard 2) plow snow 3) plant food plots 4) landscape I like the higher HP of the 3032E but there is no...

Hi everyone, I've been monitoring the forums here for a couple months while I've been going through my tractor search. Now I'm finally nearing a decision and I decided to post to get your...

I am going to buy a new tractor in the next day or so. My research came down to two models the 3032E or 3038E. Both are very similar. --- Same Weight, same loader lift capacity, same transmission...

I had this built for about 60.00 total.$30.00 for the welding & rest on parts. This is just a readily avalible bumber hitch you can get for 20-30 off e-bay & I bought this one new used for 12 I...

Hi all, new member here. I'm looking at a new 3032E and was wondering if you could help me with pricing. 3032E Loader 5' rotary cutter with slip clutch 5' box blade I've been quoted $16,898...

My local JD dealer is about $800.00 installed for the part# LVB25743 Rear Hydraulic Kit. Has anyone else priced this unit out.? Maybe 800.00 is fair, but really would like to hear what people have...

When I recently negotiated the deal on 3032e the dealer offered to throw in filters and fluids needed for the 50-hour service. I'm only at 8 hours but needed to go by the dealer for something...

This is my new compact JD 3032E with Ratchet Rake and a Box Blade. I tried to clear some of the land on my property with the Box Blade but just could not make much headway so I followed your...

I've got a new JD 3032e with an FEL, 25 PTO HP, and dual rear hydraulics and am looking for recommendations on how best to use my Cat 1 3PH. Here's what I anticipate I may be doing with it: -...

Ok I'm new here and am in need of some advise from ya'll out here. I'm looking @ buying either the Deere 3032e or the Kubota 7800 . Which would fit the bill better? At the same time plan on buying...

Just had my new 3032E tractor delivered and absolutely love the machine. Easy to use and enough power to handle on job on my 4 acres of land. My dealer said to change oil at 24 hours despite...

I traded a 2305 for a 3032a and wow what a difference. Its more stable, sounds like a tractor, and tractor handles the bush hog not the other way around. This tractor is well built and very...

Looked at a 3032e with loader for 15500 plus tax, can you add a 3rd remove valve on the unit. Local dealer said no but JD own web site show attachment that need that extra valve? Thanks KC

First off what a great site and informative group of people thanks for being so welcoming. No sucking up intended but I have gained a lot of information here and now need some more specific...

Well I picked it up yesterday from the dealer $15,400 I also bought a JD tooth bar for $389. This is the only piece of new equipment I have ever bought personally in my life! Do you think my price...

Pulled the trigger on a 3032e. With my 2305 as trade, $20,300 is the total cost. I owed $10,200 on the 2305 after 1 1/2 years of use. I'm taking a hit but now I don't have to worry about that...

with 60hrs now on my 3032E & not realy convinces the loader could take actual work, I am now convinced the tractor & loader are much tough. The loader suprises me.I think it is more in design of...

JD 3032e is here! Took delivery yesterday. Here are a couple pics. Used it yesterday to pull hay wagon. I really like it so far. The kids were just as excited as I was! My little guy had a JD40...

Hello guys, I was quoted $12,200 on a 3005 and $13,200 on 3032E, no FEL, and $16,400 on 3032E with the loader? I need to know what type of pricing i should be looking to get on these here in NC...

Well, pulled the trigger on a new JD 3032E today. Been looking at everything and the Deere just felt right. Got the R1 ag tires filled with Rimguard, FEL w/pin on bucket, pin on forks, cruise...

I have a dealer in my area that has the JD 3032E with Fel, RFM, and trailer for $18750, please let me know what you think. I'm new and coming closer and closer to my tractor NEED and purchase...

i hope some owners of this tractor are viewing tonight...my friend/neighbor is looking for a compact tractor and he wants to do a 2000 series. something 25 or so hp...I don`t like them as well as...

I was looking at the John Deere 3032E tractor with a loader. I will be using it to maintain our 5 acre lot, mowing, dragging driveway, garden ets. The price seemed very reasonable @ $15,590...

Along with other models of tractors, the 3032E is one I have been looking hard at. The only thing that bothers me about this machine is the loader is a non-removable type. The bucket itself is...