Traction Traction tips ?

   / Traction tips ?
  • Thread Starter
#31  
joe 48 , thats what I am looking for.... I would much rather buy some than make a half -a$s set myself.
Know anywhere eles that carries them , I will check out JC Whittny and see if they still sell them. thanks .
 
   / Traction tips ? #34  
I realy like the self tapping screw idea, seems easy, no damage done if you take them out, would not think pre-drill would be necessary?

Would think you pull them out and no worse for wear?
 
   / Traction tips ? #35  
First thing that I'd be wondering is the type of tires you have and what load you are carring as far as ballast.

Then I'd check the air pressure!

Then I'd want to know what type of surface you are cleaning, gravel or black-top.

Some slippage isn't bad, actually it's recommended. If you can't move, that's naturally to much!
 

Tractor & Equipment Auctions

UNUSED FUTURE FT36C STAND ON SKID STEER (A52706)
UNUSED FUTURE...
402 (A52706)
402 (A52706)
2016 Ford F550 4x4 Bucket Truck with Altec AT41 - 46FT Rotating Bucket and Jib Winch (A55302)
2016 Ford F550 4x4...
2016 FORD F-250 SUPER DUTY (A58214)
2016 FORD F-250...
2019 Ford F-550 ETI ETC37IH 37ft Insulated Bucket Truck (A56858)
2019 Ford F-550...
2020 VOLVO 760 TANDEM AXLE SLEEPER (A57880)
2020 VOLVO 760...
 
Top