JD 4310 Bucket Level Indicator

[FredSG]

Hello Guys,
I've been searching for several hours online trying to find the correct part model # for a John Deere 4310 with a 430 loader Bucket Level Indicator. So many models listed in various sites, but none seem to be for the 4310.

Can you help me with the correct model/part # for the Bucket Level Indicator that will work on my 4310.

Many thanks for your help.

FredSG

 

[Peter 315]

https://www.weingartz.com/assembly-...t-level-indicator-attachments/4275-713-492566

 

[FredSG]

Peter,

Thanks for the quick reply, I was at that site earlier, but it doesn't indicate a part # for the Level Indicator - just the various parts for it. I want to buy the hole unit. FredSG

 

[Peter 315]

Try the dealer ask a salesman might be sold as a option..

 

[beenthere]

Different for the small loaders and the larger 430 and 460 loaders.
Part numbers in JD parts.

https://partscatalog.deere.com/jdrc/sidebyside/equipment/462/referrer/navigation/pgId/2046172

 

[FredSG]

Thanks B, but that link takes me no where to the part/model # I am looking for. Just want the part # for a bucket level indicator for a 430 loader. FredSG

 

[beenthere]

I don't think there is a single part # for a kit or complete parts package for the model 430 bucket level indicator.
I looked up the part numbers shown for the pipe bracket and rod. Found the rod with bend to be available for $92 and the "pipe" the rod goes through on Amazon for $106. Suggest making or having a pipe and rod made. I can provide measurements for you if needed, but am sure you can save some money doing your own.

I use mine a lot, especially after I filed a groove around the rod and painted the groove white at the top of the "pipe" so I can see when the bucket or the forks are parallel to the ground when the FEL is down.