Home-made attachments...

[Tor Arne]

hello,live in n.ireland,I've made several things that might be of interest to u ,not copies, just my own ideas, the 1 i have posted is a couple of attachments for a mini digger to leave it a bit handier to erect a fence on ur own im not an engineer and just made this in my spare time if u like it ill show more fotos of it and different stuff

It is the most brilliant I've ever seen. We definitely need to see a video of the masterpiece in use. And :welcome:

 

[unstable]

here is some more fotos ihear the smoke alarm going so my dinner must be ready will put more photos of this and other stuff on later any questions

 

[lockhaven]

really nice, I for one would like to see more

 

[southerndeere]

I hope you get lots of stuff posted here. This is where all kinds of ideas come from.
This is my LPGS built in the spring of 2010.

Wow that's really nice. My dad paid very good money for a grader

 

[southerndeere]

I've built several, some good, some not so good.

http://s1222.photobucket.com/user/ovrszd/media/tractor stuff/DSC01817_zps8df22325.jpg.html

http://s1222.photobucket.com/user/ovrszd/media/tractor stuff/DSC01087_zps9dfb0573.jpg.html

http://s1222.photobucket.com/user/ovrszd/media/tractor stuff/DSC00865_zpse7c1532b.jpg.html

http://s1222.photobucket.com/user/ovrszd/media/tractor stuff/Grapple/DSC04669_zps050b26f7.jpg.html

http://s1222.photobucket.com/user/o...540/tree puller/DSC04726_zpsab7b481a.jpg.html

http://s1222.photobucket.com/user/o...540/tree puller/DSC04718_zps8696f44a.jpg.html

http://s1222.photobucket.com/user/ovrszd/media/Kubota M9540/hitch adapter/DSC06135.jpg.html

I really like that grapple. My dad is in the process of building me a homemade limb grapple for my new tractor.

 

[unstable]

 

[unstable]

 

[unstable]

 

[unstable]

 

[Daver1963]

hello,live in n.ireland,I've made several things that might be of interest to u ,not copies, just my own ideas, the 1 i have posted is a couple of attachments for a mini digger to leave it a bit handier to erect a fence on ur own im not an engineer and just made this in my spare time if u like it ill show more fotos of it and different stuff

Very good work and very inventive. I trust that by you're saying "im not an engineer" you just mean that you don't have a school degree. Remember - not all engineers have a piece of paper declaring them engineers and not all of the engineers that have that piece of paper can actually engineer anything.

 

[unstable]

this is what I've worked at for over 30 years

 

[southerndeere]

Very good work and very inventive. I trust that by you're saying "im not an engineer" you just mean that you don't have a school degree. Remember - not all engineers have a piece of paper declaring them engineers and not all of the engineers that have that piece of paper can actually engineer anything.

This is very true.

 

[FredH]

Here are a couple of things I either built from scratch or converted it into something I needed .




Land plane / road grader I built a couple of years ago . Added some additional bracing , modified the blade adjustment since these pictures were taken , but still no paint .





Leaf bucket I built a few years ago when the wooden one I had fell apart while dumping on the burn pile , thus it all burned !!





A 8 shank ripper that I made from a old single gang disk frame . What started out life as a 2 gang pull disk was converted to a single gang 3 point disk , then everything that was from the axle mounts on ward was cut off , braced , and the 4" x 4" x .25" tubing with shanks was added . Can pull it side hill or downhill with my TC30 , but uphill get's a little iffy when I try to go to maximum depth .


Fred H.

 

[PhysAssist]

Welcome to the TBN!

..and I love yourscreen name! I've been accused of being unstable more than once...

?..and no offense, but whatever you say, you sure engineered the cr*p out of that attachment and the fence you made with it.

Awesome job, but nothing I think I'd ever be able to replicate, much less use.

Again, nice work, and welcome!

Thomas

hello,live in n.ireland,I've made several things that might be of interest to u ,not copies, just my own ideas, the 1 i have posted is a couple of attachments for a mini digger to leave it a bit handier to erect a fence on ur own im not an engineer and just made this in my spare time if u like it ill show more fotos of it and different stuff

 

[PhysAssist]

As I tell my wife nightly, it's a smoke alarm, not an oven timer!

I'm amazed at your rigs, nicely done!

T

here is some more fotos ihear the smoke alarm going so my dinner must be ready will put more photos of this and other stuff on later any questions

 

[PhysAssist]

Those are so solidly made!

T

Here are a couple of things I either built from scratch or converted it into something I needed .


View attachment 357039 View attachment 357040

Land plane / road grader I built a couple of years ago . Added some additional bracing , modified the blade adjustment since these pictures were taken , but still no paint .



View attachment 357041 View attachment 357042

Leaf bucket I built a few years ago when the wooden one I had fell apart while dumping on the burn pile , thus it all burned !!


View attachment 357043 View attachment 357044


A 8 shank ripper that I made from a old single gang disk frame . What started out life as a 2 gang pull disk was converted to a single gang 3 point disk , then everything that was from the axle mounts on ward was cut off , braced , and the 4" x 4" x .25" tubing with shanks was added . Can pull it side hill or downhill with my TC30 , but uphill get's a little iffy when I try to go to maximum depth .


Fred H.

 

[ishiboo]

hello,live in n.ireland,I've made several things that might be of interest to u ,not copies, just my own ideas, the 1 i have posted is a couple of attachments for a mini digger to leave it a bit handier to erect a fence on ur own im not an engineer and just made this in my spare time if u like it ill show more fotos of it and different stuff

Wow that looks like my Shaver post driver look like a joke! Great build and nice fence!

 

[jd4310man]

Hear is the forks I put together last month. I was fortunate to have found the actual forks in my local salvage yard. The rest is 3/8"x 4" flat stock. It makes handling logs easy.

 

[ovrszd]

I'd never be lucky enough to find forks in a salvage yard. Nice Find!!!!

 

[railbike4]

great find on the forks and mount. looks like it should be on there.