yelbike
Veteran Member
- Joined
- Nov 7, 2011
- Messages
- 1,596
- Location
- Near Winnipeg, Mb, Canada
- Tractor
- John Deere 2305, 2320,Z465
They are both beautiful in their own way ! 
Blade for Front Quick Hitch
- Thread starter nyen0004
- Start date
- Views: 16486
-
- Tags
- quick hitch
OP
nyen0004
Silver Member
Did a bit of tacking tonight. Here are the results.
yelbike
Veteran Member
- Joined
- Nov 7, 2011
- Messages
- 1,596
- Location
- Near Winnipeg, Mb, Canada
- Tractor
- John Deere 2305, 2320,Z465
I like....I like very much!
Actually gives me ideas!
Actually gives me ideas!
OP
nyen0004
Silver Member
Welded the Moldboard brace pieces on today. Would post some pics but there picture attaching method is not working right now. I will try again a little later.
lutt
Platinum Member
- Joined
- Dec 9, 2010
- Messages
- 661
- Location
- Pocahontas, Arkansas
- Tractor
- Kubota ZG 22, John Deere 4200 4wd/ 420 loader, 4 wd,08 polaris 700 ranger crew
Congrats on the newborn and that is a nice looking blade also! For those of you that want to make a blade, a friend of mine who works at a natural gas pipe line pumping station made his out of some large diameter heavy walled pipe, this would work well if you can find the proper pipe and do not have access to a machine shop.LUTT
OP
nyen0004
Silver Member
Here are the pics I tried to attached earlier.
yelbike
Veteran Member
- Joined
- Nov 7, 2011
- Messages
- 1,596
- Location
- Near Winnipeg, Mb, Canada
- Tractor
- John Deere 2305, 2320,Z465
Will you have it spring mounted?
OP
nyen0004
Silver Member
Yes I will. I definitely want some sort of a safety so I don't bend or break anything.
OP
nyen0004
Silver Member
Welded up everything today except for the spring return mechanism. I ordered the springs today so I should get them within a couple days.
The picture taken from the rear of the tractor shows that when the blade is angled it still clears the tractor width by a good 3 inches.
The picture taken from the rear of the tractor shows that when the blade is angled it still clears the tractor width by a good 3 inches.
ericher69
Veteran Member
Nyen0004;
What type of welder are you using and at what amperage?
Can't help but notice that those beads look a little on the cold side. Not trying to pick a fight.
Blade looks great!
Have you decided on the paint type and color ?
What type of welder are you using and at what amperage?
Can't help but notice that those beads look a little on the cold side. Not trying to pick a fight.
Blade looks great!
Have you decided on the paint type and color ?
