Battery powered chainsaw

   / Battery powered chainsaw #1,281  
Grandpa… he would run the saw dry and take a break before refueling and then repeat depending on ambient temperature.

When I'm cutting off the pile, I have made a limit for myself.

ONE TANK FULL, then REST!.

But in this case "REST" means firing up the splitter, and rolling the rounds up near to hand. ;_)

Dang! I'm stupid!
 
   / Battery powered chainsaw #1,282  
So I had my first M18 battery fail, melted at the connector.
was 2 months left to the 3 year warranty.
Called Milwaukee warranty people, and replacement battery on the way!
 
   / Battery powered chainsaw #1,283  
So I had my first M18 battery fail, melted at the connector.
was 2 months left to the 3 year warranty.
Called Milwaukee warranty people, and replacement battery on the way!
No damage to the contacts on the tool? I deal with blown-up connectors as part of my job, ableit a different industry, and it's rare to see one side fail without also taking out its mate.
 
   / Battery powered chainsaw #1,284  
I got a Kobalt 40v one time from a local for 10 bucks and tore apart to figure out why it didnt work. 2019

She was like new but got hot and melted. No clue what the last owner did as there was no bar chain. But could only imagine.

Some folks just shouldn't own any chainsaws gas, batt, corded.

Good side

Bad side. Noticed mounted into plastic type stuff. When get hots it had melted.

Most of the little cooling fins were knocked off when it came loose. I pulled the rest to check it out closer.

Trying to learn to work on these seem to be mostly switches go out.

k40c.jpg
k40cc.jpg
k40ccc.jpg
 
Last edited:
   / Battery powered chainsaw #1,285  
No damage to the contacts on the tool? I deal with blown-up connectors as part of my job, ableit a different industry, and it's rare to see one side fail without also taking out its mate.
Used a dremel to remove the left behind plastic and then cleaned the contacts.
 
   / Battery powered chainsaw #1,286  
So I had my first M18 battery fail, melted at the connector.
was 2 months left to the 3 year warranty.
Called Milwaukee warranty people, and replacement battery on the way!
Milwaukee was my go to for decades but had a battery go bad on my first Milwaukee Cordless and was asked to return it for evaluation which I did.

Milwaukee said exposed to moisture???

I do construction but it was never subjected to water anymore than using it on a foggy SF morning.

I asked for the battery to be returned and was told it had been destroyed.

Have not bought Milwaukee since…
 

Tractor & Equipment Auctions

2015 Chrysler Town and Country Van (A51694)
2015 Chrysler Town...
2025 K0520 UNUSED (5) Welded Wire Mesh Roll (A53117)
2025 K0520 UNUSED...
2014 10ft T/A Dump Trailer (A51692)
2014 10ft T/A Dump...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2008 Cadillac Escalade ESV 4x4 SUV (A51694)
2008 Cadillac...
2015 International 4400 SBA Gap Vac Truck (A53117)
2015 International...
 
Top