kubota b2920

Here it is! I'm very excited and also a little intimidated. I've never had a tractor so I'm taking it slow. It's already very obvious what I don't know... Got the B2920 with FEL, 4' Bush Hog, Land Pride 50" Tiller, and a Dirt Dog 3505 scrape blade.

I warm up engine aprox 5 minutes ,(at idle)and then mouve it out of garage and run it at fast idle aprox 1 minute , then drive around back to start working and i notice even after running for aprox 15minutes the temp gauge stays cold,I was wondering if anybody else had the same problem (gauge...

Just got delivered today, along with a unbelievably stout Howse box blade. Real nice setup. I really thought hard about which tractor to get, and almost went up to the B3200. But it felt too big for my needs when testing side by side with the 2920. When I saw the 2920 up on the delivery...

Anybody use a brush grubbed with a compact? What kind of results can I expect? Thanks.

So I have been reading over my B2920 manuals, and checking things over before I actually start to use it. This is going to sound outright crazy, but it has me stumped. Standing in front of the tractor, and looking into the engine bay, I see the oil filler cap on top of the valve cover as usual...

I recently bought a B2920 Kubota tractor that is rated 29-30 hp with 21 hp at the pto. I already have a good 60in. King Kutter rototiller that weighs 690 lbs, and is rated for tractors of 25-40 hp. Will this rototiller harm my tractor by using one this large. Also when a piece of equipment...

I pulled the trigger on a new B2920, with FEL and BH. I will miss the BX25 but Barlows helped me with good prices. I will post pics once it arrives, in about two weeks.

I have searched the forums, and have found where many opt for an upgraded alternator on the B2920. Does anyone have an idea on the part number, or how much it costs to have it installed?

What would be the best fit for this size of tractor and what's the average price for a good quality brush hog?

New to this site so hopefully I am posting this correctly. I am trying to decide on which Kubota tractor to buy. I have very little tractor experience. I have a cabin in the mountains on a 1 acre sloped and fairly rough lot. I plan on grading, moving dirt, spreading gravel and some deep...

WOOOOO,,,,,HOOOOO,,,,,,boy I wish I had pictures, it took me 10 min to do what it use to take a minimum of 40 minutes with the bucket.

Wondering if the B2x20 series has enough lift on the 3pt to use full size implements like PHDs and moldboard plows, or do they still require the low profile/junior versions. Ian

How well does this attachment really work? Or am I going to have to trade up for a bigger machine? What I would like this attachment to do is dig out stumps, holes for new trees, ditches and some commercial applications.

I own a 2010 kubota b2920 and am considering to purchase a backhoe for my tractor. I have run plenty of commercial equipment and what I really want to know is in real life how tough is this attachment. I know it won't compare to a comercial backhoe loader. What I'm looking for this attachment to...

Ok I'm very close in pulling the trigger on a tractor. So here's my dilemma. I have 2.5 acres that I mow and have light front loader work around the place. I'll be building a storage barn next year and re-doing my landscaping around the house. Most (90%) of my tractor work will be mowing. I...

First time buyer B2920 with Fel and 60" mid mount mower quoted at 17999

I didnt like how the factory rear hyd valve from Kubota was supposed to be mounted on the ROPS for the Kubota B2920. After mounting on the rops, it blocks a significant amount of viewing angle and every time that I was using the 3pt or 4wd, my elbow would hit. Also, if the fittings ever leak -...

Needing weight in the front with the loader on, and need to be able to use the loader,,,,how much weight would filling the fronts with RV antifreeze? Does RV antifreeze weigh any less than the beat juice that the dealers add ?,,,,is there a down side to the RV antifreeze? Size 7-12 tires

AM looking for a good used unit Doesn't need to be immaculate I am willing to put in time and money to refurbish! Price is more important than condition

I want to buy a utility trailer for my B2920. The trailer needs to accomodate a load of 3,500+ lbs (tractor, plus BH and FEL). Any suggestions would be greatly appreciaed. I live in NW Connecticut. Thank you very much. Andrew ajacobs@mreem.com

Can I go with a 6' or would that be too much weight

Hi king about putting hyd top and tilt on my 2920,,,,,has anyone done it?,,,and how much was the valves?,,is it something I could do myself or should I let the dealer

Hello I have a B2920, 2010,,I do not have a backhoe ,,, when I spec'd the tractor I knew I wasn't ordering a hoe, so I never even asked any questions, knowing that it would fit if needed was enough for me. I really use and depend upon my 3 pt hitch, sometimes using two or three implements per...

Hi, was wondering what size trailer I would need to haul my B2920. It is completer with backhoe and front bucket. And info would be real helpful

I traded my BX2200 for a B2920 Coming on Monday!

Hi, As I stated in a earlier thread, I felt I was just about at my financial limit with the B2920HST with FEL and 60"MMM. After a review of the B3200 price, I may be able to swing the extra for the bigger tractor and FEL. Question, I will use it for landscaping, brushhogging 10 to 12 acres...

I was cutting the grass and was almost done when i noticed slight vibration ,i thought one of the blades was loose so I stopped the tractor and checked the blades all was good i then lifted the hood and checked the oil it was full and checked the antifreeze it was full,looked around engine bay...

I was wondering what the tire pressure was for the front and rear of a b2920 (turf tires ) if different.(i'm waiting for manual for tractor) dealer lost it. thanks

Does anyone own a b2920 with r3 tires(turf)and can you check to see what size tires front and rear you have that were on the tractor when new from kubota,and the manufacture of the tires,i think i got the wrong size the tractor was delivered with(rear 12.5x15 and 8.5 x12 I think they should be...

The transmission on my new B2920 is starting to worry me a little bit. It's making a loud creaking type noise when going up slight inclines or working with the box blade. It's in low range, 4wd, with the BB and FEL attached at around 2700 rpm. It's not being worked hard at all. I'm...

Hi Guys. In February I traded my BX 2350 for a B2920. The 2920 came with a backhoe, mmm and FEL. I just took off the backhoe and reconnected the hydraulic line to the tractor. I took off the gate that was protecting the lever from raising or lowering the mower and rear three point hitch...

Hi i'm looking to buy a new b series tractor ,I tried a new demo unit b2920 last night and realy liked it ,I have a bx25 now and wanted something with more ground clearance then the bx 25,the tractor will be used mostly for grass cutting ,1 acre,and I also have another 5 acres of rough rocky...

Hello guys Well I have read every thing every where on Kubota and think I would like a B2920 with FEL and a BH,R-4, mid PTO, need to fill in a 1/4 a. pond and dig 200 yards of dich, my land is a old lake bottom ( 6A.) and clean out the drive in the winter 150 feet or so. The 4A field is all...

Out with the old BX2360 in with the new B2920! My BX2360 will be missed. A great machine. I already put it to work. Those barrels must weigh at least 15 lbs each. I needed to move them down to my range. Don't know what I would have done without the new tractor.:laughing:

TSC in my area has their CountyLine Multi-fit post hole digger power unit, Stk. No. 2100220 for compact cat. 1 & 2 on sale for $50 off. I don't dig many holes so I figured it fits my needs at a reasonable price. My Kubota B2920 is 29HP, and approx. 21HP at PTO. I live on gumbo clay, no rocks...

TSC in my area has their County Line Multi-Fit post hole digger power unit Stk. No. 2100220 on sale at $50.00 of normal price which says it's for compact, catagory 1 & 2. Since I don't dig many holes I think it is sufficient for my needs. Has anyone had experience with it, and for my B2920...

Now all I want is winter to go away so I can get to work:)

Hi, new to the forum. I have a new B2920 that I just performed my 50 hour service. Just a few questions as the manual doesnt quite explain it well. First of all .....why 2 drain plugs for the oil? Second, why do I see 2 oil fill caps under the hood? I know the one on top is for the oil, but...

My B2920 was delivered today and I put a couple of hours on it. I got the quick attach for the bucket and a set of pallet forks as well as the 60" MMM and a rear work light. I took the mower off, put it on again, took it off again. It is a quick and easy process. I took the loader on and off...

I had purchased a B2920 with a 60" MMM but I held off a little bit unsure about my real needs. Dealer has been very understanding and has not pressured me at all with anything. They have even let me demo a few things before I make this purchase. I have a JD 737 zero turn now 54" deck 23HP gas...

Just got back from placing my order for a B2920 with FEL and Landpride RCR1248 RM. Looked long and hard and this machine made the most sense for my needs and budget. Paid $17,325 with loaded rears. Even though I got a better price from Barlow's, about $300 less, I decided to use a local...

Is the position control feature in the L series worth the price bump from the B2920? Using the machine to mow and move stuff around on 11 acres with some hills. I also see the B2630 has the position control and indep PTO the others have a live PTO. Any help with the indep vs live PTO issues...

I'm being offered a used (23 hrs) B2920 (first sold Nov 2009) with loader for my BX2230 (150 hrs) w/loader + $4600. That's the bottom line deal. Both HST. Good deal or walk away? Thanks!

Being offered a used (23 hrs) B2920 (first sold Nov 2009) with loader for my BX2230 (150 hrs) w/loader + $4600. That's the bottom line deal. Good deal or walk away? Thanks!

Got this quote from my local dealer. Look good? B2920 $13,600 (list $15,039) LA364 Loader $2,900 (list $3,174) 60" MMM $2,450 (list $2,500) I'm also going with the QA and pallet forks (full list price was his quote), QA was $279, forks and frame was $1,031

Looking to take the plunge and buy new. Need to rough cut about 4 acres of hilly field. Also want to be able to move some split firewood from time to time and clean up a little after the plow goes through. Looking at a B2920 HSD R-4 with a LA364 ldr and a 4' Landpride mover. Priced out at...

Hey folks. I am a new poster but have been reading posts here for a long time. I have a question that I hope you can help with. I just traded my BX 2350 in for a B 2920. One of the main reasons for purchasing the slightly bigger tractor was to get a more stable tractor for the backhoe...

gentelman, can a b2920 handle a 63in blower or do you have to go with 51 in. high cap. blower? one dealer said yes and the other said no. cant get a b3000 for 3 months so i was considering the b2920 with fel and blower. need some info? thanks

Does anybody know of a skid plate kit available for the underside of the b series tractor? Contacted bro-tek but no kits available yet I like the design for the bx series Has anyone built their own? Any pics?

started pricing the JD 2520 because of the quick change bucket (FEL) and other quick attach implements, tractor with R4, 62" MMM, 200CX loader is $18,500 (before any taxes). Then of course I had to look at Kubota (have owned two), so I priced B2920, FEL, 60" MMM and was at $18,500, then looked...

I thought I saw this sometime back, but can't find the thread. I'd like a set of forks for my 2920, but not the clamp/chain/bucket type. I thought I'd read where the forks from a larger model (3030 or 3200 ?) would fit the 2920 FEL arms. Can someone confirm (or deny) this? If true, about how...

looked at b2920 today. started it up and ran the fel. seems well built but i shut it off and holy cow my whole body was still viberating after i got off it.:confused:was priced at $22500, with 63inch front mounted snowblower and fel for 48 at 0% anyone have input on this?:confused2:looked at...

Well it was only a matter of time - the title says it all - I have decided that my next attatchment purchase (a core aerator) is now on hold. Since I would only use something like this twice / year, not to mention the cost for these are ridicules so I started my quest for a 3 pt snow blower. I...

I just bought a set of 2 link chains for my tractor's rear tires (turfs) from tirechain.com. I was planning to install them as a weekend project, but after placing them on the tire to check the clearance, it looks like I'm going to have about a 1/2" of clearance between the chains and my fender...

Well, I mentioned in another thread that I'd outline the reasons why I traded my B2920 Kubota in for a Deere 2320. And at the risk of criticism, I'm writing this up to save someone in my position the expense of making the same mistake... I believe the more you learn from other's experiences...

My alternator light on the instrument panel is always on. Battery voltage when tractor is running is 14.6 volts, so I know my alternator/dyno (whatever it is) is charging. Tightened the belt to be sure. Any ideas? Issue just started this weekend, 75 hours.

I was quoted 16,000 for a new Kubota b2920 w/ loader. Another $2k for the midmount mower. Thoughts?

Newbie here with a brand new tractor... the temp outside was 36 degrees and I was moving firewood from the backyard to the house. I watched the temperature gauge and noticed that it only moved a little bit, in fact it was still barely above "Cold" all through the job. I'm guessing this isn't...

I used my Kubota front plow for the first time today and it does not seem to go low enough. I read the manual and looked it over but I don't see any way to make it lower. has anyone run into this?Hopefully there is an adjustment I am missing. If not I am thinking about getting the rubber cutting...

Hello to the group, this is my first post. I will be pulling the trigger next week on a new tractor. I have done a lot of reading and comparing stats. It痴 down to two tractors?D 2520 and Kubota B2920. Both with FEL and BH. I have ten acres, about 6 in gentle sloping pasture and 4 wooded...

Well, first, thanks to everyone that weighed in on the plow v. rear blower question... I'm still pretty unsure of what to do. In fact, I've realized I have 5 - yes, 5 - viable options, in order of least-to-most expensive: 1. Front mount snowblower for my lawn tractor: $1600 2 Rear mount 3pt...

This has happened twice now within 2 weeks. The tractor will be running normally, and then I'll get up out of the seat (something I'd already done numerous times before) and as my weight comes off, the tractor will sputter and stall out...as if the pto was engaged (it's not) and the safety...

I am going to purchase a car hauler or utility trailer when I can find the right deal. Kubota.com shows the tractor at 1390 without loader or backhoe. I think I read that the BH65 weighs 1400 lbs so I would guess the whole deal would be around 3000 lbs or maybe 3500 if the loaded tires are on...

This is probably pretty basic. Although I have become somewhat skilled with tools I have never gotten into the wiring side of things. My tractor has a rear light installed. When I bought a 12v sprayer I used the 12v connection the dealer installed on the ROPS to power the sprayer. Now the light...

Does anybody have the B2920 Front Snow/Dirt Blade? If so how do you like it? Never even seen one Just on Kubota wedsite. How much are they? Thanks:drool::drool:

This is a repost from the oil and lube forum.....:o I hope someone here can help me....I'm in the middle of servicing my Kubota B2920 and can't find the Trans strainer???? I don't think it has one.:confused: Its not even mentioned in my owners manual. But neither was the 2nd engine oil drain...

I hope someone can help me....I'm in the middle of servicing my Kubota B2920 and can't find the Trans strainer???? I don't think it has one.:confused: Its not even mentioned in my owners manual. But neither was the 2nd engine oil drain plug. So I thought I would check with the pros here. Does...

I have a B2920 that may need to be transported 2 miles away infrequently. My wife's truck (2007 Lexus LX470) can easily tow this amount. I am thinking of a 16 or 18ft tandem axle landscape trailer. Does anyone know the law in Virginia? Are trailer brakes mandatory? I am looking for a used full...

hi,i am new to tractorbynet,i am from western pa and have been looking for a versitile tractor for sometime now. and i recently seen a ad about a ls 3010 tractor with loader for $13288.00 i was wondering if that was the going price ? any problems with these new tractors ? parts availibilty ? how...

With the price of aerators / pluggers I want to be sure I make the best choice - hence looking for feedback. I am looking to purchase a 3 pt core aerator soon and was wondering if anyone has an experience between these two designs (with and without the plugs attatched to the drum). Does one...

First off, I wanted to thank all the posters on this board, it really helps to get feedback from people that own the equipment. I think I've followed the same path as many on this board, looking at BX1860 first, then BX2360 and BX2660. I have not ruled these out, but I have 6.5 acres mostly...

:confused2:Bought a large rectangular Blazer magnetic base Work Light at TSC for my B2920. I wanted it for mowing at night with my 60" MMM. I like to see the grass line on the right side real well when mowing, and the stock lights are too far out front. I tried it out hooking direct to battery...

I was following another thread about the hassle on mounting a BH on a Kubota. I had bought a B2920 last April with the BH but didn't ask the dealer to deliver it (the hoe) until this week (just moved here, and had to make room in the barn). In the mentioned thread, DeizNutz (sp?) posted a photo...

I'm looking at a B2620 or B2920 with a BH , ROPS and FEL. I am now getting ready to modify a building for a shop and garage, but unsure how high the door opening needs to be so the tractor can be driven in with the ROPS installed and the BH in the normal position transporting position. I am...

I know from another post it holds a lot more than 3.7 quarts of oil. Any other tips? oil and filter change, hydro filter change and adjust clutch pedal? I did not see anything about a magnet for shavings like my BX24 had. all info will be appreciated!

Hello all, I'm new to the group and need some help. my question, is there any differences from the o8 and 10 year b 2920. I have a chance to buy a o8 that was a harvest rental and has 45 hours and was told it would cost another 4 to 5 grand to get a 10 model. I was also told don't be worried...

Hello, I bought my Kubota B2920 FEL used...just with the FEL. I think I need to make a decision between hooking upto to the existing hydraulics and buying a PTO driven pump. I'm looking to put a cement mixer mounted on the 3 point hitch. The mixer would be driven by the PTO and the 'dump'...

I am very limited on where it can be dumped because of an asphalt driveway. 5y will only need to go 20 feet or so and the other 10 will need to go about 200 feet. thanks

I'd like a plow to use occasionally for the small garden I have, put in a food plot, and random lawn renovation. My owner's manual suggests a 1 bottom (14") plow, but the only used ones that show up around me are for much smaller tractors, many along the lawn tractor category. I do see quite a...

Just realized there are two engine oil fill spots on my B2920 why?:confused2:

I have been looking to replace my old 1958 Massey Ferg TO-35 with something new. Along with my Massey I have a 60 inch King Kutter II tiller, a six foot rear blade and a middle buster plow. I have been looking at purchasing a new Kubota B2920 and have some questions. I have already compared...

I just put these on and it makes the tractor feel MUCH more stable. I would highly recommend them. In the pic below the spacer is installed on the left side.

I have finalized my purchase decision on a new tractor to either a B3200 or the B2920/B2620. I have about 6 acres, the majority of which is wooded. I will be establishing trails, doing a lot of loader work (I have gravel on the property), grading the area around my new house and scraping the...

I've had my B7510 with a FEL for 5 years, is excellent condition and has 255 hours on it. However, I'm looking for a bit more power and am considering the B2920 with a LA364 FEL and R4s. I stopped by the dealer who sold me mine and he gave me price of $17,995. After I sent him some pics of mine...

this thing is a beast!

Just got back from the Kubota dealer. I put my L245Dt on the front lawn for sale and it lasted 1 day. I have 5 acres in the desert and 1 in the mountains. Like the Mid-mount PTO on the B2920. Hate the FEL. Love the L2800 for power and FEL. The prices were pretty good, L2800 w/FEL , Sunshade $...

Does anyone know the speed range of medium gear for the B2920?

I posted a while back that according to the specs there is not a big difference in capacities (loader etc) between the two. After using it for a full day the difference seems pretty big. Here are some early impressions My general impression is obvious - just that this is a much bigger tractor...

I did not have time to use it because today is my daughters birthday. i will post some more pics later. I got a QA with forks, 50" bucket with toothbar, 60" bucket, backhoe with thumb and front hydro blade.

Looking for new Kubota. Love the B2920 and that is what I wish to buy but can't get comfortable with the reach to the steering wheel. Does anyone know if the dealer can change to a tilt wheel? Really don't want to go to aftermarket. Thanx for help. Todd

JD 2520/2720 VS Kubota B2920 -------------------------------------------------------------------------------- I'm trying to decide between these tractors to buy. I have no previous experience with compact tractors at all. Just test drove the Kubota and am going to drive the JD. Just wanted to...

JD 2520/2720 VS Kubota B2920 -------------------------------------------------------------------------------- I'm trying to decide between these tractors to buy. I have no previous experience with compact tractors at all. Just test drove the Kubota and am going to drive the JD. Just wanted to...

Folks, Thanks for everyone's thoughts on my question of which tractor. This site is terrific. Just signed the papers this morning for my B2920 with FEL, shredder and box blade. It should be delivered Saturday morning. Terrific local dealer, who didn't push, was genuinely concerned about my...

Greetings everyone, I am another newbie who has lurked here for a while but never posted.:newhere: I am going to be hopefully doing a step up this spring. I have a BX 2350 and have had it for one season. I plan to move up to a B3200 or a B2920. :licking: The BX 2350 is a fantastic lawn mower...

I plan on building a front mounted snowthrower for my Kubota B2920. I will model it after the Kubota 2781A 50" and/or 2782 63" snowthrower. I have a few questions that I'm sure you all can help with. - Is the front quick hitch that the snowthrower uses some sort of industry standard? Can...

New guy here.. :) Does anyone know if RCK60-27B mid-mount mower (for the B7800, B2910 ) fit on a B2920 ? The B2920 docs call for a RCK60-29B, but the prior 2910 model used the 27B, and I thought (hope) they might be cross compatible. Anyone know the answer to this ? Thanks in advance, Dave...

Made a deal with Barlows - great experience! I am getting a B2920 TLB unloaded turfs, loaded ags, thumb, front hydro blade and hitch, wheel spacers, rear light, QA, forks, 50" & 60" buckets with welded hooks, 16" BH bucket and a BX42 chipper. I really like the BX24 and was always amazed at...

I have a B2920 with 5 hours on it.With it goes a slightly used Landpride boxblade and new Landpride rotary cutter.It has front end loader and r4 tires.I was thinking of asking $16500 for it.Is this a reasonable price for this?

I have a B2920 with 5 hrs.Also have a slighty used LandPride box blade and a new Land Pride rotary cutter.Was thinking about asking $16500.Is this a fair price?Live in Philadelphia,Ms.Has front end loader and r4 tires.

Well, after spending a lot - I mean a lot - of time looking at tractors, I finally made my decision and picked out a B2920 with a loader and a mid-mount mower. More attachments to come... I want to thank everyone for their patience answering all of my questions and for offering their insight...

Hi Guys, 1st post; thanks in advance for any help. Here is my situation; own 8 acres mostly open and flat with some woods. I am looking for a tractor to clear my 150' paved driveway of snow also it will be used for minor landscaping projects for the little woman. Clearing brush from a fence...

Hi all, I am trying to install a after market 3pt hitch Log Splitter that runs off the BH hydraulics and will need to have a couple of hydraulic lines made up to attatch the splitter to however, I have found that there is very little info (manual, dealer etc) on the exact type of quick...

Hi all, I was hoping you guy's could provide some insight. I installed my 60" front mount blower a couple of weeks ago, and ever since, my hydraulic lines have been leaking from the remote located in front of the operator's right leg. I have removed the fittings, re-attached, and still drip...

Just wondering if anybody knows of a replacement (wix, fram etc) that would fit the B2920. I'm at the 100hr mark and need to change engine oil. Thanks ericher69

Looking for pictures of rear work lights on your B series Tractors. Pictures would be great. How did you wire it? Thanks

When I have my B2920 in four wheel drive should both front wheels spin when loading the bucket? Only one will spin at a time. Just making sure this is normal? I was thinking they would both be locked in? I guess that would make it hard to turn though.

Yes another light thread but I felt I had to show it off since I scoured this site and used the search tool to death to get ideas on how I may tackle my light project on my new B2920. I used these lights from my BX22 days I felt duals both pointing front and back were a priority. Also when I...

Does anybody know the part # for the armrests for the B2920? Is there a good place to buy them online? I can't seem to find them anywhere. Thanks:confused:

I just traded my BX20 in for a B2920. So far I am pretty happy with the change except one thing, the front tires tear up my lawn. My tractor has the turf tires that come with the 2920 but the turing radius on the 2920 is tighter than my BX and the tires really tear up the lawn even when I am...

I have a B2920 and am thinking about filling the rear tires myself - been doing some reading on past posts and looks like I could do it. Questions - 1 - How much should I put in? It's a B2920 with R4 tires. 2 - Does it effect anything and are there any downfalls? I have a BB and BH, but am...

Has anyone bought or used spacers on the B2920 to extend the rear tires out? On the new models, they don't have the axels that have the holes to extend the wheels out like they did on the B7510. It's a little tippy on hills, etc. and would like to find a way to extend the wheels out from the body.

Can a B2920 run and lift a 5' Brush hog OK? The owners manual says 48" but I think I have read on here of other members running a 5' I have found a deal on one thats why I'm asking. Thanks...

I just took delivery of a new B2920 today. Didn't get a chance to do too much, but was getting the "parking" area set up.... I test drove the B2320, B2620, and the B2920. With the larger engine on the B29 is sound totally different. It has this really nice even hum to it that the others...

Guys, I've read other threads where there was some major rust, parts missing, etc... Anyone have any suggestions on what to look for specifically when I take posession of it tomorrow? Rust and where? Anything to take apart and look at? Any parts that may be missing? I trust these guys, but...

Ok, I'm going to try to not make this too long. I want to thank you all for your input, time, and help over these past months. I have asked a lot of questions, read a lot of comments, and enjoyed the debates, opinions, and suggestions. Truly, there is no way I could have made the intelligent...

I took the tractor in for it;s 50 hour service. What I found interesting is that in calling and talking to the service manager, HE said, "The verdict is still out on whether Kubota is requiring the change of the hydraulic/transmission fluids. What would you like to do?" Asd the next scheduled...

Can someone tell me what engine oil came in my B2920? I want to stick with the same stuff. I'm a little low and only have 20 hrs. I tried this in the oil section but didn't get much help. I figures there where more Kubota dealers looking over this thread. Thanks

Looking a rear blades for snow plowing. Is a 60" blade wide enough for a 49" wide B2920? I have a smoking deal on a used 5' land pride blade. Will I regret it when its angled? I like it because I can get through the woods with it.

Can someone tell me what engine oil came in my B2920? I want to stick with the same stuff. I'm a little low and only have 20 hrs. Thanks

I've been looking at upgrading from my little bx that I just can't stop getting stuck to the new b-series. My dilemma is I would like the B3200 but prefer the floating mower deck on the Bxx20's over the ground engaging one on the B3200. So until they make a Floating Deck for the B3200 I guess...

Anyone have a B2920 with the backhoe on it? I'm leaning toward the B2920 if I get new and have seen multiple posts saying that it's less expensive if you buy the tractor with what you want on it instead of buying the implements later on... Is this true? Does anyone have any backhoe...

Ok, so I finally drove about 60 miles to a dealer just to test drive and look at the B2920. I've already driven the B2320, but started them both up since some people on here has said there is a difference... Yeah, there's a difference!! The B2320 sounds like a diesel car and the B2920 sounds...

Anyone go through the purchase decision process of the B2320, 2620, or 2920? I'm thinking if I get a new one, I may go for the 2920 since it's more powerful but only a little larger in size (by just a little bit according to the specs on kubota). Would be a B2920, R4 tires, hydro-4wd, fel, box...

My B2920 has developed a chronic starting issue. Most of the time when I try to start it nothing happens. I have to tap the forward, reverse, or break pedal until I hear a click and then it will fire. Every once and awhile I can't find the sweet spot and it gets difficult to get it...

Hi all, I have had issues with the 3pt pin that holds the 3pt hitch pieces together (this runs through the Draw Bar) since day one. Although a 3pt hitch is not rocket science I think the manual does a horrible job describing on how to put on and take off the 3pt hitch. When I went to put on...

I am looking to upgrade my BX22 to a B2920 and I am looking for a little advise. The B2920 comes with a 16" bucket and I am thinking of downsizing to a 12" for the added breakout force. I use the bucket for small digging projects so I'm not sure I need a 16" bucket. Do you think the difference...

OK so how about a few comments from the trailer experts here on how I am tying down my B2920 to my trailer. I am not looking for the Chain / Binders vs Strapping arguments but more about where on the tractor I am tying to (or should be tying to). I am having a devil of a time finding an area...

I hope this story not too long for you guys, but i wanted to make all points at once...so here it goes. I was disappointed when MF/Agco came out with a 2610 on same GC platform rather than upgrading their underutilized 1523 model with same TLB design that went into the GC series. IMO put their...

Since I just turned 10 hours I am still working the B gently however, yesterday when I went to use my middle buster (potato plow) in the garden -(4WD, 2000 RPM) I experienced a very noticeable vibration under the deck. Now, prior to plowing I was using my bush hog and there were no problems but...

Every now and then you just got-ta run to the house and grab the camera for that Kodak Moment. I was going up to my farm property to do a little hogging and thought I better snap a few pics before she gets all dirty! The 4 foot Farm Force is far from the top of the line but it has yet to fail...

Just wondering if the loader on a B2920 is adjustable at all? Mine set a little lower on the left side? I don't think I bent it in my 11 hours of use?:eek: Or is this fairly normal? Thanks

Afternoon everyone, My name is Charles and will be buying my first tractor this coming week. I will be using the tractor to mow,move rock,dirt,snow,dig stumps,etc and also remove trash on about 6 acres. i have narrowed down my search to B2920 or a last year model B7800 both will have loader w...

My B2920 throttle seem to be too hard to adjust. How tight should it be? Can it be adjusted? Thanks

Picked up my B2920 yesterday. Getting ready to mow with the 60 MMM today. It doesn't say in the manual what RPMs the engine should be run at to get the appropriate MMM RPMs. What should it be run at? Thanks

What size impliments is a 2920 rated to run? Are there different catigories? Anything to look for if buying used? Thanks

Need a little help here. I just sold my BX and I am looking at these two to replace the BX. I have 8 acres only mostly woods and brambles that need bush hogged the rest 3 acres is house gravel drive which will be paved at sometime garden 30'x40' two barns and grass. valley in the woods with two...

Here is a unit that I saw for sale. It has a 60" deck as well as the grass system. Any idea on what this unit should sell for? Thank You..... Fred TractorByNet.com 2008 KUBOTA B2920 HST 4WD TRACTOR 60" MID MOUNT MOWER, 3 BAG GRASS/LEAF CATCHER, REAR HYD REMOTE, FRONT END LOADER READY. 8 MONTHS...

Looking at a deal on a B2920 He said it was shipped in 08? Does that mean its an 08? Any way its making me wonder if I should pay more for an 09? Should I worry about the first model year. Was ANYTHING changed in 09? Thanks

Noticed oil leaking...smelled it and smelled like diesel. Wiped it up. Today another puddle...upon closer inspection found the front axle drain bolt left side was loose and leaking fluid! Tightened and checked the other side. Should this have been cought in the first service at dealership...

Hi all, Brand new to this Forum. I've read some of these threads over the last several weeks but only today registered. I've been looking for a small tractor. I've checked out the John Deere and the Kobuta small B models (2320 - 2920). While I won't slam the JD models, I did think that the...

Has anyone bought a B2320? Anyone upgraded from a B7500 series to a B2320 or one of the others? I've been all over the place with what to buy, but have narrowed it down to a great deal on a B7500/B7510 or a new B2320. Any input on the 2320/2620/2920 with a loader? Is it stronger than the...

I really need some help. I was going to purchase a New B2920 MMM & FELArond $16,500. Then I ran across a friend of a friend that is selling a 05 B-7800 witharound 300 hrs 72" MMM FEL 4' roller back blade and more. ASKING $12,000 seems like a pretty good deal? Can't decide. HELP

What is a GOOD price for a B2920 witha FEL & MMM ? Thanks Guys. Ready to buy...Want to think I'm getting a good deal!

Hi guys. I'm a noob here. I have a great deal going on a B2920 FEL & MMM right now. I have a few questions first though. I would be replacing a 04 Simplicity 50" Zero turn mower. My question is how are these a at mowing? Is it to much tractor for my lawn? I mow approx 2 aces. Own 6 Also really...

I'm getting my 60" mmm for my ready for the spring and was wondering if anyone has a better way of getting the grass residue removed from underneath. I've used a scraper to remove the majority, but there's still a thin coating that's pretty stubborn and I'm trying to minimize any damage to the...

After researching for over 2 years I decided I was ready for my upgrade from my BX22 (which by the way was a awesome tractor) to a larger B platform. I felt the new B2920 was a perfect fit for my needs present and future offering more HP for ground engagements as well as a larger platform (but...

Anyone out there know if the BH75 from the b30series will fit the b2920. And no buying a bigger machine is not an option!!! Just looking at my options before shelling out 7-8k for a backhoe not much more capable than a bx series backhoe. Will it hook up??? The b2X20 series takes the kubota...

Any one care to post the rave review of their 2900's 7800's & 3200s I Will Have one of these ASAP!

I am thinking about trading in my New Holland TC33DA on a Kubota B2620 or B2920. I just dont like the ergonomics of the NH (it feels like you are perched way up high). The B20 series is definately smaller and I am concerned about its capabilities. Will they pull a 5 foot disc harrow through...

Hi Everyone. I went to the dealer with the intention of test driving and possibly purchasing a new 2920 with a FEL and filled R4's. No other options I tried it out and feel it would meet my needs. The dealer is trying to steer me towards a new leftover 7800. He says he will sell if for the...

Hey out thier , any B2920 owners use a 5' bush hog and a 5' boxblade??, the dealers have been swearing my buddie off of the b2920 and telling him he needs a bigger unit, B3030 or so, the price difference between the 2 around here are about 4k, so its a bit of money, he only has a bout 2...

Anybody know if the Bseries comes with an alternator or magneto? Seems to me the specs say 35amp alternator...but dealer says magneto! ericher69

This is some video that I captured yesterday while removing a fresh 8-10" snow fall with the B2920 51" industrial front quick hitch blower with hydraulic shute rotation and electric shute deflector SIMS cab with heat and strobe. The cab is also wired with 2 front mount 55W spots and 2 Rear 55W...

This is my delima, I have a acre yard, and 2 acre field to bush hog, I can get a b2920/w 60" MMM new for $13,ooo.oo, a BX2350/w 4' bush hog,54"mmm with 27hr for 7800.00, or a good deal on a B3030 o5 model with 179 hrs, 54MMM,bush hog Tiller,bush hog post digger,box blade,loader,and fertilizer...

Used the new B2920 today with SIMS cab/heater/wiper for fresh snow removal...wow! Doesn't even break a sweat. Now is "3wd" active in reverse also? or just forward direction? Yes it was engaged fully but did not seem to be spinning the front tire when the rears where spinning. ericher69

I have been looking at options for a second tractor for some time now. I looked at a used B2100 and thought it was a good one. I made an offer on it and was turned down. I contacted two Kubota dealers with my needs. I wanted a light weight 25 to 30 hp tractor. I run a specialty crop farm here in...

Does this make any sense? The HST drive does not work when the clutch is depressed on the B2920! Released the clutch and bingo! Is this a safety feature? I thought the clutch was for the pto engagement only ericher69

To anybody with the answer or a shop manual... Is there a special technic to refill the rad on the B2920 (I've installed a cab from SIMS with heater)? Or is it just run and add as needed? Thanks ericher69

I have searched the reviews and did not see one for a B2920. I signed the papers for one today. Is this a good light weight tractor for a small produce farm. I have a two row cultivator, 7 foot tandem disc, 5 foot KK tiller, 5 foot KK RFM,2-14 Dearborn plow, middle buster, and 60 gallon sprayer...

Does anyone know of a manufacturer for a front end locker to get TRUE 4wd on these tractors? Something like a Detroit Locker or ARB Locker? Thanks ericher69

I bought a B2920 a couple months ago. my dealer said I would be able to use the front plow from my BX2350 but would need a new quick hitch which should be available by November. I called today and they said the quick hitches are still not available. The snow will be here soon, does anyone know...

I have read numerous times that some feel that the price increase isn't worth the extra 3 hp. My question is what can a 2920 do or use that the 2620 cannot? Can it pull a 5ft. RC instead of a 4ft? I believe they weigh the same and I'm sure that plays a role but as a new looker into the...

Hello everyone... I've been meaning to get back and and post an update/review of my B2920 that I received this May but I haven't had the time. This is not the review yet but its coming some time next week. I'm wondering if anyone else has the Quick Hitch B2791 for either the blower or plow on a...

Was going to buy a B2920 but had not finalized the deal yet, but now I am buying 2 1/2 acres of ground to build another house. Already have 4 1/2 acres and will be taking care of another house we own for mowing. Question is with building a new house there would be a need to install a culvert...

When I first installed the lift arm on my B2320 for the mid mount mower, I was not satisfied with the fit of the lift arm on the lower link rod of the 3Pt mount (see LiftArm.jpg). The internal diameter of the bushing on the lift arm is 23.75MM and the transversal shaft is 22MM. You can actually...

Gents, I have been looking for a cab for my B2320 but I don't know if anyone makes one yet. I looked at the following site: Curtis - Tractor Cabs, Canopies, Sunshades, Equipment covers, Snow & Ice Control Equipment Sims Cab Depot - Kubota enclosures Do you have any other suggestions, I want to...

Can anybody shed some light on this...kubota website lists tractor weight at 1554 lbs. http://www.kubota.ca/flash/b_series/pdf/b_series_spec.pdf Now I was looking at the ROPS this a.m. and found the tractor specification plate near the right rear tire on the ROPS and the plate states that the...

Just wondering what the actual hydraulic flow that is available to run an implement if the hydro is in neutral. The total pump output is rated at 8.3 gpm...is that the flow available through the rear remotes?? If Anybody that knows please chim in Thanks ericher69

I put 15 hours on my new B2920 this weekend. It exceeded my expectations. I mowed about 4 acres, dug about 15 stumps, dug up and moved several large rocks, and moved alot of topsoil. I am very pleased with this tractor. It is the perfect fit for my operation...

How much for the rear remote hydraulic kit for this machine?? What kit number and is it a do it yourself project?? Thanks ericher69

Anyone out there know if there is a break in period for the kubota b2920 engine? Yes I will read the owners manual but any ideas on how to do this or if it is even necessary? Thanks ericher69

Next spring I am going to need to plow 2 or 3 Acres. I've never done any plowing. On another site I ask for advice about plowing. Someone said they thought the B2920 could handle a two bottom plow with 14" plowshares. Does this sound reasonable? Also, is it possible to just till or is plowing...

Could someone post a real nice pic of a B2620 or B2920 so I have something to look at until Friday? I want to set it as my background. Prefer one with the BH on. I checked the photo gallery and couldn't find anything.Thanks! CJBOTA

Hey guys, I need your honest opinion about the extra $$ for 3 hp on the b2920. I will be doing residential snow removal with a front mount 51" blower. I was looking at the b2620 but for $900 more I can get the extra 3hp... This question is for anybody that owns and uses a front mount blower...

I've had the B2920 for about 10 days now and put 12 hours on the little dude. What follows is what I've found with the new tractor. After having an L3410, the 2920 is smaller for sure. But the power is almost the same. Dragging a scrapper blade uphill pushing a pile of gravel and dirt is...

Has anyone replaced their 3ph turnbuckles with the telescopic stabilizers? What older model tele's will fit the B2920 series? I know a number of members did this to their B7510's and B7610's. Are the turnbuckle stabilizers the same on a B7610 and a B2920?

Also a tractor newbie! I have 10 acres and am looking for the best all around compact bascially for mowing, tilling, moving some rocks and most importantly want a front attach snow blower (I'm from Canada after all!) Our driveway is on quite a hill so I think the snowblower would be a better...

THING ABOUT BUYING ONE OF THESE TRACTORS WITH A LOADER, BACKHOE AND A MID MOUNT MOWER. BUT I AM HEARING THAT IT IS A P.I.T.A TO SWITCH FROM THE BACKHOE TO THE M.M.M. BECAUSE THE M.M.M. USES THE 3 POINT HITCH TO LIFT THE DECK UP AND DOWN? HAS ANYONE HAD ANY EXPERIENCE WITH THIS? THANKS FOR YOUR...

I live in Ontario Canada on 3 acres of woodland but my access lane way is 1/4mile long with VERY steep hills. I need a tractor with a front mounted snow blower to keep the road open in the winter. My local Kubota dealer is recommending the B2320, B2620 or B2920 model with snow chains for...

I made the mistake of stopping by my local (Central New York) Kubota dealer where the new B2920 caught my eye. I could use a few more HP and loader capacity. With the exception of some dents in the bucket (LA302), my 3 yr old B7510 has 170 hrs, is well maintained, has never spent a night...

I have decided to get a B2920, previously I have had a B1750 and L3010. The B1750 did not have quite enough power, almost bought a B2910, but went with L3010 instead. The L3010 was too big, too heavy to trailer. Now am going back to B2920 for the power and small size, good pto power, not size...

Although I've been surfing this site on and off this is my first post. So I guess I'm new here. Hi ALL! First alittle back round. I live in Putnam county NY and pretty much live on 4 acres of ROCK. I have about 30,000 square feet of lawn the rest is wooded surrounded by old 4ft high stone...

I'm contemplating selling / trading my 190hr B2400 to upgrade to a new tractor. I'm looking at the three tractors above. I need to iron out their (non cosmetic) differences. I'm looking for apples - to - apples comparisons on FEL capacity , three point capacity, hydraulic capacity, etc. Specs...

I thought since one of our members (bota2620) has already purchased one of these new models I would start a new thread. Folks can post here about their impressions of the new models as they start seeing them, buying them, or using them. Price information is always good, and pictures, especially...