Search results

I have a few more minor projects. Some landscaping and another sun shade. The thing I have enjoyed that freaks my wife out is using my outdoor shower when it is 25 degrees outside. Needless to say I am pretty quick going back inside.

No wasted space. I can do a little adjustment. I have a snap on cover that is a pain and is getting old. I think this is a quick solution to keep it clean.

I am trying to figure out how to get a pontoon in there as well. Both pictures have the trailer in the same position. I may swing the cargo trailer perpendicular.

I used 1/2 x 6.5 galvanized screws to go into the treated 6 x 6 base.

18 x 25 carport installed. They built it like they were fine furniture craftsmen. Maybe a slight exaggeration. They did take great pains to keep everything square and level. Super organized and in 2.5 hours they were complete.

When I showed my 3 sons what 64 year old dad had done, the reply was you had a tractor. I explained I had to stand them up straight to hook up the sling and they were heavy treated and wet. I am not sure they always appreciate my projects. 😀 One day they will. My 90 year old dad does.

Original 4 x 6 posts were attached to a sunsail. When we had a 40-60 mph Storm they moved. I had them in about 2’ with concrete but the ground was softer than I thought. New 6 x 6 posts are over 3’ with more concrete. They should never move!

Dropped another 16 tons of gravel for the carport base. I let it sit with the clay I brought in for a few months. The carport should be there in January. It will be 18x26x8. This gives me a center height of 11’3”.

I don’t know if I pointed out that I used Galvanized lag bolts, not Zinc in the treated wood.

I will have them install it. Seems like all of the companies include free freight and installation. 25’ panels can be a lot to handle if there is any wind. I have installed 25’ panels on my lean to we built and it was hard to not bend them.

New cutting teeth were a big improvement in the hard soil. I had also watered the holes to soften them. Remaining side is just as level. We had to flip the 6 x 6 x 24 to remove a bad bow and get a good side to work with. I have more bags of concrete to add to finish up the base. Oldest son...

Fun day. I had no idea that the ground was so hard in that part of the yard. 9" auger to start and get depth. 12" to finish and open up the hole. One side done, hope to do the other side next weekend.

Dug out the pad.Looks like the carport will be 18’ wide by 25’ deep.

I am also going to pour concrete as my last project of 2023.

Brought the bush hog home. It is beat and needs to be refurbished. I delivered 2 6x6x24’ to start the next project. I am adding another metal carport this winter. This will be my base.

I had to go to 3 stores to find fire ant killer. It seemed to work pretty good. It was a fine powder and they said to apply it like a powdered donut.

It was as slow as a turtle until I watched a YouTube video and using a tie wrap on the governor it now runs over 20. I need to GPS it. It could go even faster but I don’t want to hit the Rev limiter.

I think we got the deal of the century on a Club Car Gas Golf Car. We added a rear seat and LED lighting. 2023 and it was not stolen. All in at less than $5K. It was a crazy deal. New I think it was over 11K. I am the 3rd owner in 4 months after it was purchased. 1st guy died. 2nd owner bought...

115 Fourstroke 261 hours. Completely serviced. Oil looked like it was in a diesel truck. Lower unit had no shavings.

I will try to get some updated pictures. Here are some tidbits since I finished keeping the theme of doing it cheap. My electric bill has been about $40-50 per month. I only run the mini splits when we are there. Winter or Summer. It is like an ice box when they are set to 70. Warm at 64. Water...

The finish line is in sight!!!

This thread should be coming to a close. Thanks for the support. Memorial Weekend is the first time the family will use it. I have a few more tweaks and mini projects planned.

Thanks your encouragement has meant a lot!

Everything is looking great. I killed about 4 hours reading over your posts. Continue to keep hitting it hard! It is impressive what you and your lovely family have achieved.

I was thinking today that I would not have been able to do what we have done without my tractor. It has paid for itself many times over. When I went from my Ford Jubilee to my New Holland my wife was like do you really need it and the bucket. After a short period of time she changed her mind! I...

I ran into a plumbing problem when I tested my washer dryer. Several failures. On spin cycle it sounded like a machine gun. Also there was a drain backup. I tried to snake the lines but I couldn’t get past a tight p trap. I am going to locate a local plumber.

It was an epic ending that seemed to define the person he was!! I would be so proud of the way you helped him show incredible dignity.

Plan for the future and stairs. We were both in great shape as we looked at building when the last kid graduated from college. In our current house which I built at age 57. I oriented the house to the slope of the land. The front door has a sidewalk that runs the width of the garage on the...

I have not done what you are planning on doing to that level. I did build a pole barn and living quarters inside. Had a permit for the garage and finished it out as I wanted. Never an issue. Lucky a garage first w/o a house was an option. Approximately 40 x 60. Friend liked it so much he bought...

Thanks for sharing

I need to study up on using a Fluke Meter!!!

I only had a voltage tester pin. I called the electrician that solved my other problem and he will come by next week. If I have a cut or nail, I will have him tell me and then I will run the new line.

Thanks guys! I am going to have to take a week off due to my real paying job and the coffers are pretty low. My son with the railroad is working a quarry not far from Gaston. He was given a quote of $1200 delivered for 25 Tons of what they call ballast. It looks good for what I need. My sons...

Down to touch up paint and replace a breaker. Then on to the outside.

Thanks I wish I was on the lake. The lots are starting at about 200K plus if you could even find one. Right now I am still on track to be under 65K for 2 lots/1.6 acres, 1000 sf completely renovated with a deeded boat slip. The noise of jet skis and boats have driven my efforts. Something like...

And?

Thanks for all the updates. First class job!!!

The neighbor across the street decided to walk her dogs as I was trying to unload. I think she figured a disaster was imminent!!

Tractor Usage Today 1-2 years old? It's date of mfg was August 2019. Not as new as it looks. I do think it had little use. Little Usage Facebook $380 New they are about $1400. It was a good score.

I have kept my expenses as low as possible and try to use quality materials. My kitchen: Granite countertop Free Bowling Alley Laminate 3 at a 100 each. One used in the kitchen. Stove Free Fridge $200 SS Shelf $120-130 SS Table $140 Backsplash $45 Sink and Faucet $430 Wood for 2 islands $150-200...

Many thanks for following and the support!!

That is the black ABS fitting. 1-1/2 in. ABS In-Line Cheater Air Admittance Vent

Cut the water and turned the heat on to avoid single digit temperatures and freezing pipes!!

Merry Christmas to everyone and try to stay warm!

Getting towards the end of the indoor projects. Waiting on more funds!!!

Pex it’s such a good product and so easy to work with.

Mike it was bizarre. I was doing little jobs before catching some sleep. It was only the second night I have spent there. I had pulled about 8 screws around the perimeter of the washer dryer anrea and when that one came out it was a precision stream. I have a main shutoff 6 feet away that I...

Thanks I have been reading about how to do the corners. Most suggestions are the same as yours.

I am going to hit it hard over the Holidays.

Still keeping your family in our prayers.

Beautiful! I am afraid the bowling Alley’s are going synthetic laminates down from the 2 1/2” to 3” (?) hardwoods. From my 7/8” to a 1/4” veneer. Very cool.

It was cheap!!! What else could you buy for a $100 a sheet?

I just researched reducing washers for my tail pieces. Leaks do worry me. I really like using PEX as it is such a great product. I pressure tested my system for a week and my only issue was a missed PEX crimp the first time I turned the water back on. LOL. Colors are neutral. I wanted the place...

I am under a time crunch so I am rushing to finish. I have spent the evening researching tail piece nuts and washers so I do enjoy projects.

The granite is sitting in my enclosed trailer. It is 41.5 x 80 and a little over 1” thick (1 1/4”). 400#. Not quite as heavy as I originally thought. I have a group of young men that are going to help out it in place.

Thanks for sharing!

I have a Milwaukee M12 Caulk Gun on order. It will make my trim fit look better!

It sure looks like stick welding. When someone makes my welding look good maybe great I would question their skills. Heat penetration is questionable. They kept adding beads hoping to strengthen the welds. It may hold but I would use a grinder clean up the welds and see the penetration. Make a...

Great thread. Great work!!!

Thanks it has been a grind.

I have about 11 more 4 x 8 sheets and the inside will be recovered. I am taping and mudding and sanding. This is definitely not the fun part. I was able to use my tractor to remove some good size pine stumps that were located next to the sidewalk. I was going to rent a stump grinder, but I...

Thanks all I need is more money😀

One reason is it is resistant to hail damage and it also has a longer life.

26 GA is superior but generally not needed. I used 26 GA on a roof at the lake. My garages all had 29 GA.

I have jumped in to cool off. Boat is still sitting on the trailer. Maybe later this summer.

I have never shared this. My buddy said that one day he will give me this car. He told me to print the text so if anything happens I can show it to his family. 1969 Nova SS 396 375 HP Numbers Matching 4 Speed Red with Red interior. One of many in his collection. I believe that he knows this is...

Discoloration on the metal should wash off. It was kept on the ground which is a no no, but it was leftover roofing scraps.

My sleeper now lives in Wisconsin with a good buddy. 1963 Chevy II Nova 350 700R4 about 400 HP

Your question has made me crazy!!! Another Cut and Paste. I will have to check out my gauge I have on the water line. It has a needle that should mark the high surge. According to the Uniform Plumbing Code (UPC) any water pressure above 80 PSI is considered excessive. Water pressure is the...

Cut and Paste The pressure level can vary, but 60 PSI (pounds per square inch) is recommended for most residential homes. Water pressure should not be higher than 80 PSI. Anything higher can cause major appliances, including water heaters and toilets, to stop working properly because of the...

The tankless WH is actually ok up to 150 not sure why. I have looked at PRV’s. I will see how it registers on the gauge.

Incoming water pressure is 80 PSI. I have a gauge on it to see if it varies on the max. The system held with no leak down over several days. Nice now having a bathroom with a toilet.

That is a great idea. The septic guy called me this AM. He suggests that before I do a pump out I get some liquids in the tank. It has been over 10 years since it has been used and the owner never had a washing machine even hooked up and he was a single guy. I am at a point that I can install a...

Day 41 All the lines held perfect. The tankless water heater installation went smoothly. Now I can seal up all the access points for the water lines. We also got a good handle on the second bathroom design.

I was able to turn the supply on at the water meter and bleed out the line at the trailer. I wanted to see if it would hold the pressure. Hopefully I can start testing the lines in the trailer.

Day 40

Wife was in a critical accident. Level 1 Trauma Intensive care. Bottom line she is home and doing exceptional. We moved offices and warehouse at work. I went to NY and picked up another muscle car project. I am burning the candle at four ends. I already have 2 car projects going. I am getting...

Day 39

Day 38

No I used the old HVAC duct system and then on top of the insulation between the floor joists. I ran them through cutting the floor from above rather than from under the trailer.

Day 37

Day 36

Day 35

Day 34 Window Replacement

As everything I own it was cheap! It does have a Evinrude E-TEC 90 HP E90DSL Outboard Motor with 220 Hours.

There is a path that is about a hundred yards from the front door to my boat slip. There are 14 and a few are never used. They are deeded so I don’t have to share. The boat is ready.

Day 33 Exterior PVC Trim and setting the stage for window replacements There were not stock sizes available at the big box stores. Custom orders are available but for a $205 window I would imagine that the would be well into the $300 plus range.

Day 32 Windows and Aluminum Trim

Day 31

I am enjoying running the PEX. With my limited access and the size of the Apollo Crimper Tool, you do have to always be a few steps ahead in your installation.

Day 29 / 30

Little Shower is almost ready for tile down the road. I will go ahead and install the shower valve. Amazing how much time labor and $ to get it to this point.

2 Sheets 3/4” 4 x 8 treated $59 each The lists keep growing.

$5.98 if I remember from this morning 😀

Day 25 - 28