Please, don't comment on what you do or whst other manuals state. Does, anywhere, in the manual for Kubota L3540 read that you need to put a weight box on the 3pt hitch to use the FEL? No manual...

I have an L3540 Hydrostatic 4 wheel drive tractor, have had it maybe 8-9 years. This problem seems new or has been slowly getting worse and I'm just starting to notice it.. When I have a mower on...

2008-ish Kubota L3540 HST with 723 loader. Theres a long back-story. Tractor came to us by a lock-stock&barrel purchase of some farm-land. It was sitting in the bush for at least the last 10...

Ok, I have a Kubota L3540 HST with loader. Changed the trans/hydraulic fluid and filters today. Followed my manual to the letter, drained the system, R&R both filters, the book says it takes 11.1...

This has happened half dozen times in the 1k hours I’ve put on my machine. I can’t figure out what holds this fitting going to fuel pump in. A certain orientation maybe or is it pressed in and not...

I noticed last night that the head lights weren't working and found the fuse blown. I replaced it and it immediately blew, so I figured there was a short somewhere. Today I removed the console...

L3540 - YouTube Please check out the quick video that shows hydro fluid steadily dripping out near one if the valves. All fitting are tight and it just started happening over the last few weeks...

Something must be wrong in the safety switches - I push on the HST pedal a bit and it cuts out. I try to turn on the PTO (experimenting) and it cuts out. It runs fine and hydraulics work but it...

So how do I reset the "service inspect" on my dash, I know I've reset it before after service but I cant find reference to it in my manual OR shop manual!! So If you know how , tell me, and if...

I am trying to put on my hydraulic tilt lift arm - but can't get the old one off. I've sprayed in some Kroil to see if it would loosen up and make it clear what I do next - obviously that didn't...

We closed on about 11 acres of land recently. Plan to build a barn and house in the near future. Most of the property will be for our horses. It's mostly grass and was either used for hay or cow...

Greetings gentlemen, I need to change my belt before winter sets in. Replacing the belt looks to be routine, there looks to be room to feed the new belt around the fan blades.My question is...

I recently put a seal kit into the steering valve on my customer's Kubota L3540 HSTC-3. I match marked the sections, disassembled, cleaned, and carefully reassembled. When I installed the valve...

Had someone that I know call me to ask if I wanted to buy a like new BH77 backhoe for my 3540. I beleive that it came off of a smaller tractor and at this time, I dont think that it comes as a...

Hello all, I'm just getting back into owning and operating a machine, haven't had one in a few years. I just this week picked up a used grand l3540 with 300 hours in very good shape and other than...

Hey all, I have recently developed a cracked hydraulic line that seems to originate from a plug on the bottom of the tractor that weaves its way to the front of the tractor that I can't see...

Hello, I have a Grand L3540 and need advice on what to purchase to control the chute rotation on a 3ph snowthrower with hydraulic rotation. I have the hydraulics for my backhoe but I'm not sure...

I'm looking at a 2010 L3540 HST, LA724 loader with quick connect bucket, a Buhler farm king 8' back blade. 600hrs. Not a cab tractor. It's been kept inside and meticulously taken care of. Looks...

I have a L3560 HSTC tractor and am surprised at how much the road speed drops going up a slight incline. It has industrial tires, and on the level will take a bit of time to get up to 13 or 14...

Hey fellas I've been looking into a rear blower for my tractor and I'd like to see if you guys think my tractor could handle a 74" sized blower? This is what my local dealer is saying for size. I...

I need to replace the front turfs on my 3540, Who has the best prices on these tires in new england?

In planning for the purchase of a loader for a Kubots L3540 I would be interested in the opinon of others as to the best available. The Kubota LA724 or the Rhino equivalent are possible. Are there...

Kubota recommends this procedure @ 800 hours. I have 1000 hours and have not done this. How crutial is this adjustment, am i putting my engine in jepordy? Thanks as always gentlemen!

Friends L3540 starves for fuel sometimes. At one point it really bogged down and stalled. The Fuel Filter is replaced once a year and it looked clear when the Stall happened. We pulled the Fuel...

I just installed a stack of 3 valves on my L3540 with the center one being a FD valve (L8309). When trying to use the FD valve towards the rear, it works smoothly. When I push it forward toward...

Well looking for my next implement a disc... found a nice Howse 8' unit used for a good price, but I'm wondering if its too big for my Kubota L3540? Mostly sandy soil, not much in the way of...

Was mowing today and noticed that the tractor wouldn't achieve much speed in M low or M high. RPMs would bog way down when peddle was pressed. Giving more throttle didn't help. In fact, tractor...

Hi Everyone, I found this forum while trying to find info on Kubotas. Long story short: My dad recently and unexpectedly passed away leaving me with all his stuff. He was the owner of a Kubota...

I have a Kubota L3540 just had front axel redone at dealers. Got it back and when it warms up it only goes in reverse. Let it sit overnight and it is good for a bit. Does any body no what's going...

Been a long time coming but I finally got a backhoe for our L3540. I chose the Woods BH80x for a few reasons; I wanted a hydraulic thumb, the price and USA made. While I am sure the Kubota BH92...

Running into a problem with hst losing power Driving I notice it's shifting a lot from fast to slow, almost like someone left a brake on the first click Big difference when pulling the...

Hello people i have just rolled my tractor on thursday onto the roof from a 20 ft drop and its pretty dammaged so i have to find another one the question is do they bolt on can they be replaced it...

2009 120 hours, LA514 loader QA bucket, 5' brush hog, 5' box blade, rear remote. Looks like its spent some time outside in Florida with some light fading. Just realized there is a typo in my...

Ok Kubota L3540 HST with the LA724 loader.350ish hours All seemed fine earlier today, but at the end of the day the loader did not want to go down. Up, dump, and roll back all seems fine, just...

Planning to purchase loader for L3540. I would appreciate thoughts on The Kubota L724 vs the Rhino 1590.

Looking for a B3030 or an L3240 or an L3540 with cab and front end loader preferably somewhere in the Northeast. I will be shipping to Canada. Please let me know if you have one you would like to...

I also posted this over on Orange tractor - I'm looking for photos of a Grand L3540 / LA724 loader with the Kubota Backhoe subframe mounted. I have a project of converting my 3pt hitch backhoe...

My machine is stalling at random, not a whole lot but enough to make me wonder why? Machine is a 2008 with 1000 hours. It stalled a couple times last winter moving snow, and has stalled 3 or 4...

Hi just bought a kubota l3540 love the tractor works great used it to move round bales and all but just wondering how good do they start in the winter cuz I'm Plowing with mine so I need to know...

My loader control is out of adjustment. Smooth control of bucket is nearly impossible & you can't engage the joystick slide lock. My Kubota manual doesn't cover adjustment procedure. My...

I posted this in the Kubota forum but only got one reply (which I appreciate ) but I'd like to get some more thoughts on it. Ok... In Jan. I purchased a new L3540 cab with the LA724 loader and...

Ok... In Jan. I purchased a new L3540 cab with the LA724 loader and R4 tires (loaded in the rear). I had 3 rear remotes..... 2 with float and the 3rd fuction valve on the front installed at the...

I have a line on a Danuser F8. It looks a little rough but is said to be in great working order. I checked online and the gearbox is rated for a 40-80 HP tractor. Will I be able to run this...

Was wondering if anyone out there could say if this is a good price for a Kubota L3540 HST. It has a loader, cab with all the bells and whistles and a blower with 4 rear remotes with 180 hours use...

Just took delivery of this L3540 GST with one hour on the meter. I looked at the 60 series but for less money decided to go with the proven engine. This puppy is going to do some mowing of some...

I have a L3540 Cab tractor with the electric defrost in the rear and corner glass. The tractor is used for snowblowing, and often times the snow is blowing back on you so the heated glass is a...

I'm wondering if a Woods 84HB is to big for my L3540? I found on fairly new one for a nice price but just thinking is might be to much for that size machine. Please let me know what you think.

Have 5+ years on my battery, want to plan for replacement. Printed on oem battery NX110-5MF, 80D26R, 582CCA. What 'group' number have you guys used as replacement on these models with no...

I have noticed with my L3540 that when it is cold it has a hard time turning over. It stays in my garage where the temps have been around 40 degrees. It seems like the battery is weak. The...

hi, I'm sneaking in here from the Coyote forum. I'm looking at an L3540,, 2010, without a loader. What does it take, aside from the loader ( LA514) to install the loader? They mention a quick...

Since 2 years now, I own a L3540 HSTC with a Kubota cab. What my dealer advised me not to do, append yesterday; I just burst my cab door-window, while moving a few feet forward with the cab door...

Hi all, This is my first post (and a long one) having joined the list to better educate myself on the most appropriate tractor for our needs over the long run. I mean that literally, has anyone...

Just wanted to share my experience of changeing the Hydro & HST filters on my Grand L 3540, it had 47.9 hours on the clock. I wanted to do the 50 hour before the weather changed for the worst up...

So here is my situation. I am trying to decide on a new deere 3520 open station with 300cx or a used Kubota l3540 with cab and 100 hours on the meter. Both priced at 26k. Opinions please.

I have a big choice to make. Both tractors are ready to be picked up and I can choose either dealership. The costs of both tractors will be about the same. So price is not a consideration. I...

Just want to make sure i am maximizing the potential of the 3540, what is the largest- Disk/Bush Hog/Box/ 2 row turning plow it can run? R4 tires are unfilled and is HST and has FEL. Prior...

I just purchased a low hrs L3540. When I changed the oil [which appeared quite dirty] something puzzling happened. When I pulled the two drain plugs the oil ran out very slowly. However, when I...

Hello everyone! I went and looked at a 2011 L3540 HSTC with a 734 loader and 51 hrs. It looks new! The only problem is I was checking new price with mid PTO and a 72 mower and I found that you...

Hi, I have a 66 inch quick attach bucket now but want to buy another one to put my toothbar on because it would be easier to switch buckets than to take TB on and off when needed. Where is a good...

Newbie here looking for opinions on a B26 or L3540.I understand that these are two total different machines.I believe both tractors are 2011.The B26 has 256 hrs and is from a dealer.The L3540 has...

Howdy, Just took delivery of a brand new L3540 HST. What a beautiful machine! Couldn't be happier! I haven't done a whole lot with it so far as I'm waiting on a grapple to show up, but I have...

I have a discussion going in pricing, but thought I would seek some additional advice. I own a B3200 HST at home, at work we have a L3940 HST, both have loaders, I much much prefer the 3940...

Recently discovered my L3540 with 250 hours has about a 2.5 inch crack on the lower black plastic portion of the roof over the door. Anybody patched one with jb weld or a similar product and how...

Well folks, my tractor came in at the dealer. Waiting for the loader and grapple to come in next week. woo-hoo! What do you guys think that the realistic weight on the tractor and loader will be...

Is 900lbs too much weight to keep on the tractor when not doing any heavy FEL work? The tires are not loaded and I have the LA724 FEL with the 72" HD round back bucket with bolt on cutting edge...

I believe I've made up my mind to order a new Kubota L3540HST 37hp w/R4 tires this week. I'm going with the 724 loader and I think it comes with a 72" bucket and WR Long 3rd valve on the loader...

My new L3540 and box blade arrived at the dealer today. Hopefully I'll have it delivered by the weekend. Still waiting on the core aerator and will probably be adding a 5ft Landpride rotary...

Here are a few pictures of my new tractor. All I can say is WOW! Traded in my B3030 and Bobcat mini ex for it. So far its great. Can't wait to get it dirty.

I swapped the back hoe for the 3-pt and box blade a couple days ago and was smoothing part of the driveway when the lever that controls the 3-pt height went slack and almost dropped through the...

Does anyone know the overall length of an L3540 or L3800 with the FEL down and a BH77/92 attached in the transport position? Thanks

I'm putting my '08 L3540 w/ HST, QA, LA724 and the larger bucket to go with it. The machine has 199hrs on it and has been parked outside (gasp :ashamed:). What would be a fair price to move this...

Hi all. I've had my L3540 for a couple of years now but always found the hydraulics a bit weak and would like to check if the pressure is within spec. I've seen posts for other models here but...

I thought we had decided on the Kubota, until the 4% price increase. After talking to an LS dealer, who used to be a JD dealer, at the farm show, I'm not sure anymore. The LS has more hp,weight...

I thought we had decided on the Kubota, until the price increase, but after talking to an LS dealer (who used to be a JD dealer) at the farm show, we're leaning toward the LS. The LS has more hp...

I thought we had decided on the Kubota, but after the price increase and talking to an LS dealer, who used to be a JD dealer, I'm leaning toward the LS. More hp,weight, extras, warranty, better...

I'm interested in purchasing a new Kubota L3240 HSTC or the L3540 HSTC. I'd like the following options: LA514 front loader with 66" square back bucket rear hydraulics cab options: rear windshield...

Price on an L3540HST w/ LA724 Q/A loader. Would like to add a mid pto and rear hydro for a wood splitter. Any advice?

I'm considering different options of these models. Any info on pricing? Also, why is it that the Hp and pto Hp is higher on the L3800 than the L3240?

Hello all. I've been reviewing info on this forum. Hoping for some advice from the group. My wife and I just closed on 40 acres of pasture, timber, creek, and a couple acres of tillable ground...

If you have purshase a L3540 HSTC (4WD, CAB) or L4240 HSTC (4WD, CAB) since 12 months in Canada, please answer this question: Looking to buy this week, either a L3540 HSTC (4WD, CAB) or L4240...

This weekend I'm doing the 50 hour service on my neighbors one year old L3540HST before we put on his front blower.I'm very familar with Kubota servicing,but have a question.We're going to do a...

Hello everyone I would welcome any input on the following situation. I am looking for something that will haul round bales (4x5), Rake hay, and do general odd jobs/clean up. I have 2 tractors I...

Price $25800 less $1000 promo on tractor and possibly less $500 promo on loader if still offered. What do you think? Thankd Don

Anyone have any idea why my engine would run fine for varying lengths of time and then slowly loose power and rpm's until it stalls. It does this even when parked in neutral with no pto or any...

Hi Guys, Working on a new kubota, trading up from my BX2200. Dealer has a L3540, in the crate from 2010. Says it is a 3 series. Claims to have all the upgrades as any new L3540. Anyone out...

I bought a Bearcat SC5540B chipper for my tractor today and it works great, but on several instances the tractor shut down without warning as if a safety switch is kicking in. I followed the...

Does anyone have a feel if the Kubota GL3540 can easily handle a 6' Landpride rcr 1872 rotary cutter? Going by the 5hp at the PTO/foot of cutter it would appear to be too large? Pretty sure the...

New to the forum and buying my first tractor, so this newbie could use some advice... Think I have it narrowed down to the 2 models listed above--looking at about a $2800 upgrade for the Grand...

Im a snow blower virgin, infact never even used a walk behind lol. I have plenty experience handling snow, but all by blade and loader. Used to contract 5 highschools in virginia back in the...

Today I welcomed home an L3540 HST that was a "harvest rental" with 89 hours on it. Got the 724 loader w/ 3rd function valve, standard bucket, BH77 backhoe, and a 72" box scraper (not shown in...

I think I have settled on the Grand L series for a tractor. But can't find a used one anywhere close to me at or under 19K. Hoping someone might know of one close to Nashville, TN. I would be...

Can I run a 3pt wood chipper 6" without worry for lack of PTO HP..Or does it have sufficient amount to do the job? Also for use of operating in a lot of timber /field mix doing work on wildlife...

Here goes my first post. I was bush hogging with my L3540 last night. I ran over some brances from some trees that had been cut down. One wedged under the tractor on the left side almost under my...

I have had a BX 25 for 3 years now and apsolutely loved it but wanted a cab for comfort. After reading hours of threads of information on tractors I upgraded 3 times prior to making my final...

Well JT, Barlow's Truck and driver Donny arrived this morning a day later then expected but that's ok because he was bringing ]my new tractor, wow she is a beaut.:thumbsup::thumbsup: Had to say...

I'm looking at moving up from my B7510HST with la302 loader and 60" MMM - 21hp (17 pto) to work on 30 acres of farmland we are buying. On paper, I pretty much had my mind set on the Grand L...

Hello from Nova Scotia, I hope its OK to ask advise on a first post but I need some expert advise on a new Kubota. Started out 10 years ago with my first tractor, a B7500 and it was great...

Hey guys im at my 50hr service on my L3540 already and Im wondering who has done their own service and how did it go? Ive got to take it to the dealer for a couple issues and for poops and giggles...

I plan to do an oil and filter change on my L3540. The digital service indicator is on at just over 100 hours now and I was wondering how to reset it after the oil change. I looked thru my...

Can any owners of the L3240 or the L3540 please tell me the height of the tractor from ground to the folded rops? Let me explain why I need to know. Wondering if the Grand L's 3240/3540 would fit...

I went to Kubota today and priced a L3540 HSTC and they gave me a price...... L3540 HSTC 724 loader with 72" bucket R4's Woods 72" rear finish mower All said and done tax and all it came to $...

Looks like im gonna be getting a Grand L3540 HSTC in the next few months and I have a question.... can a MMM be on the tractor the same time the loader is and can it be ran with the R4 tires...

Hi All, Very new to tractors and this is my first post. I just bought a used Kubota L3540 with LA724 Loader with Quick attach bucket, BH90 Backhoe, and Gearmore Top and Tilt BB 72 Box Scraper...

I purchased a brand new L3540 with cab about 2 months ago, and so far I love it, but I have one question I was hoping someone could answer. Recently I was using the pallet forks I purchased...

There's a "New Woods Loader for Kubota L3240 and L3540 Tractor" advertised on ebay - located in Charleston, SC. Might be a good deal for somebody.

I'm in the market for a new tractor. These are the 2 I'm looking at L3540 w724 and NH3040 w/250TL. Am I comparing apples to apples here in respect to the dimensions and capability of these 2...

I just sold my L3130 DT 4WD to move into a tractor with the cab. Tired of freezing in the winter and let's face it, why not? I think the power in my L3130 was been adequate for my snow pushing...

I finally got my new FEL forks welded, primed and painted. I purchased the quick attach plate from ebay and then had a friend who owns a welding shop put together the cross members and the brick...

Hey folks, first post here. Thought I would share a bit about my 6 month journey to buy a new tractor - just in time for Christmas. This will actually be my 2nd tractor. My first tractor was...

I was again impressed with my 3540 and LA724 loader today when I ordered 40 sheets of 4' x 8' OSB for sheeting my garage. Not really sitting down to calculate what that might weight I assumed it...

I was looking over my tractor and noticed a grease fitting on the front axle support where the front driveshaft passed through to get to the front axle ('Rear' front axle support). This is on the...

I have a Kubota L3540 and i have purchased a Kubota Bh90 backhoe. I need to connect the two so i need the subframe and hoses. I spent a whole week going to every dealer in west Michigan and they...

I was looking at either one. But I've read so much about the small B series, I'm wondering if I am getting too much tractor. I'm not in a rush to get things done, but I don't want to be...

Has anyone here bought the new Kubota Grand L3540? Like it? Who here purchased the L3400? Do you wish you took the step up? Thanks!

Does anyone know what the correct kit number or numbers are for the rear remote kit to add one rear remote to a Grand L3540 without a cab? I'm getting a couple of different quotes on the kits...

I'm considering an L3540 or an L3940 for food plot work including plowing with a 2 bottom 12" plow, discing , spreading and seeding. I'd like some input from folks on the machines I'm considering...

First post - long time reader - finally remembered my password! L3540/Cab is new - dealer received inJan 2007 or June 2007 ; not sure Has 0.9 hours Price including LA724 FEL with heavy duty...

Looking to upgrade to a GL3540 tractor with turf tires; LA724 loader with 72" QA bucket and 72" mmm for $25,000 out the door. First does this sound like a good quote? Secondly can anyone...

I am currently looking at upgrading my tractor from a B2710 to a GL3540 with turf tires, LA724 loader with QA 72" bucket and 72" mmm. I have a quote for the GL3540 tractor as equiped above for...

Anybody come down to these two tractors before deciding what to buy? If so, which one did you buy and why? I'm looking to upgrade from my 1995 JD 870. I like the smaller frame size but would like...

Well I'm working my way down the colors. I decided the JD of choice was the the 3520 w/cab 300cx loader with HST. Now I've moved on to comparing the Kubota. I just got home from the dealership...

Performed 50 hr oil change and when I started it up the "service inspect" came up on display. Called dealer to ask how to clear it. The dealer said hold down the display mode and travel speed...

I'm planning on purchasing either a L3240/L3540 mostly for landscaping and snowblowing. I only have 2.5 acres but I believe I'll be buying a bigger place someday. Landscaping will be mostly...

the title says it all-I'm planning on building a shed and would like to be able to easily park a tractor inside. The tractor has foldable rops which had to be shortened by 3-4" in order to fit...

I just sold my BX23 yesterday and I'm taking delivery on a new L3540 tomorrow. Time to get out amongst 'em!!!! woooo hoooooo:D

What do you guys think would be a fair price on a new L3540 HST with a Woods 80 backhoe, Skid Steer FEL quick attach the LA724, R4s, and toothbar?;)

I am looking at a Grand L3540 cab model with air heat and CD, it is hydro has all the lights LA724 loader and 40 hrs. What should I be paying for it, it is private sale.

I'm looking for some quick advise from anyone that has had their speakers out of their Kubota cab tractor. My problem is that I removed the speaker grills by removing the screws and found that...

Not really sure and haven't tried much yet but how exactly does the auto throttle work. Seems like when I engage the auto lock, the hst pedal gets stiff. Do I need to engage or do something else...

Looking for list prices on L3540HST tractor, LA514 loader, std bucket, R4 tires. The Kubota pricing site was closed before I could get it from there. I'd also be interested in any sell prices you...

I知 new to this site and am really glad I found it. I知 in a quandary right now and am looking for some of the expert advice I致e seen so much of. I am about to purchase a new tractor and...

Looking to replace a NHTC33Da that I lost in an auto accident. I'm between a kubota L3540 and the JD 3520. I'm trying to match the NH I had but want a little more power and more weight. Looking at...

In July 2003 I purchased a new Kubota Grand L3430 HSTC equipped with a 723 FEL, 72" bucket, Bobcat quick attach, one remote, big turf tires, rear wiper, radio kit, and rear lights. The tractor...