YM 2610

   / YM 2610 #1  

widowmaker19

New member
Joined
May 19, 2025
Messages
9
Tractor
Yanmar 2610
I’m very new to old tractors and have been servicing my ym2610, was able to get tractor running and now my 3 point hitch is in raise position and unable to lower down, I changed hydraulic fluid and still not able to lower down. Any suggestions on what to do ?
 
Last edited:
   / YM 2610 #2  
Is the stop valve open between your legs? Round handle. Try moving pin handle valve on side of control valve under the seat different position.
 
   / YM 2610
  • Thread Starter
#3  
Yes I have it turned open as far as it will go
 
   / YM 2610
  • Thread Starter
#4  
Is the stop valve open between your legs? Round handle. Try moving pin handle valve on side of control valve under the seat different position.
Yea tried that didn’t move anything
 
   / YM 2610 #5  
Yea tried that didn’t move anything
Does the tractor have anything on the 3pt. They are gravity drop. If nothing for weight you might stand on lift arms. If tractor has been sitting it might be stiff.
 
   / YM 2610
  • Thread Starter
#6  
Does the tractor have anything on the 3pt. They are gravity drop. If nothing for weight you might stand on lift arms. If tractor has been sitting it might be stiff.
Yea had a sprayer on it took it off then tried putting weight on arms. Maybe I need tap it with a sledgehammer?
 
   / YM 2610 #8  
Yea had a sprayer on it took it off then tried putting weight on arms. Maybe I need tap it with a sledgehammer?
play with the tiny lever under the seat.

DSCF7268md-circled.jpg
 

Tractor & Equipment Auctions

NEW 2022 Load Trail CH 83IN x 18FT Equipment Trailer (A51039)
NEW 2022 Load...
2001 INTERNATIONAL 2574 6X4 (A51406)
2001 INTERNATIONAL...
FORREST RIVER CHEROKEE CAMPER (A50854)
FORREST RIVER...
2018 Bobcat T590 Two Speed Compact Track Loader Skid Steer (A50322)
2018 Bobcat T590...
2000 Ford F-650 TMA Flatbed Truck (A49461)
2000 Ford F-650...
Ford Super Duty 4x4 Pickup Truck Bed (A49461)
Ford Super Duty...
 
Top