YM 2610

[widowmaker19]

I’m very new to old tractors and have been servicing my ym2610, was able to get tractor running and now my 3 point hitch is in raise position and unable to lower down, I changed hydraulic fluid and still not able to lower down. Any suggestions on what to do ?

 

[winston1]

Is the stop valve open between your legs? Round handle. Try moving pin handle valve on side of control valve under the seat different position.

 

[widowmaker19]

Yes I have it turned open as far as it will go

 

[widowmaker19]

Is the stop valve open between your legs? Round handle. Try moving pin handle valve on side of control valve under the seat different position.

Yea tried that didn’t move anything

 

[R Barger]

Yea tried that didn’t move anything

Does the tractor have anything on the 3pt. They are gravity drop. If nothing for weight you might stand on lift arms. If tractor has been sitting it might be stiff.

 

[widowmaker19]

Does the tractor have anything on the 3pt. They are gravity drop. If nothing for weight you might stand on lift arms. If tractor has been sitting it might be stiff.

Yea had a sprayer on it took it off then tried putting weight on arms. Maybe I need tap it with a sledgehammer?

 

[winston1]

I have heard of piston sticking. .

 

[bmaverick]

Yea had a sprayer on it took it off then tried putting weight on arms. Maybe I need tap it with a sledgehammer?

play with the tiny lever under the seat.

 

[bmaverick]

Yea had a sprayer on it took it off then tried putting weight on arms. Maybe I need tap it with a sledgehammer?

In the back there is also a lock lever. It's like a forced postion draft control.

 

[widowmaker19]

In the back there is also a lock lever. It's like a forced postion draft control.
View attachment 3501575

Man I’ve been trying to figure out what that thing controls. What position does it need to be in? Mine is currently in up position same as the picture