YM 2610

   / YM 2610 #1  

widowmaker19

New member
Joined
May 19, 2025
Messages
9
Tractor
Yanmar 2610
I’m very new to old tractors and have been servicing my ym2610, was able to get tractor running and now my 3 point hitch is in raise position and unable to lower down, I changed hydraulic fluid and still not able to lower down. Any suggestions on what to do ?
 
Last edited:
   / YM 2610 #2  
Is the stop valve open between your legs? Round handle. Try moving pin handle valve on side of control valve under the seat different position.
 
   / YM 2610
  • Thread Starter
#3  
Yes I have it turned open as far as it will go
 
   / YM 2610
  • Thread Starter
#4  
Is the stop valve open between your legs? Round handle. Try moving pin handle valve on side of control valve under the seat different position.
Yea tried that didn’t move anything
 
   / YM 2610 #5  
Yea tried that didn’t move anything
Does the tractor have anything on the 3pt. They are gravity drop. If nothing for weight you might stand on lift arms. If tractor has been sitting it might be stiff.
 
   / YM 2610
  • Thread Starter
#6  
Does the tractor have anything on the 3pt. They are gravity drop. If nothing for weight you might stand on lift arms. If tractor has been sitting it might be stiff.
Yea had a sprayer on it took it off then tried putting weight on arms. Maybe I need tap it with a sledgehammer?
 
   / YM 2610 #8  
Yea had a sprayer on it took it off then tried putting weight on arms. Maybe I need tap it with a sledgehammer?
play with the tiny lever under the seat.

DSCF7268md-circled.jpg
 

Tractor & Equipment Auctions

AFE SSMM Disc Mulcher Skid Steer Attachment (A49461)
AFE SSMM Disc...
2025 Safety Basket Forklift Attachment (A50322)
2025 Safety Basket...
2004 Chevrolet C5500 Shuttle Bus (A50323)
2004 Chevrolet...
CAT 420F2 IT (A50854)
CAT 420F2 IT (A50854)
2019 CATERPILLAR 299D2 XHP SKID STEER (A51242)
2019 CATERPILLAR...
2014 FORD F-250 (A50854)
2014 FORD F-250...
 
Top