SSQA - is there a standard/conventional width?

[Midniteoyl]

He said it was a cheap Ebay item..

 

[FlyFishn]

Sounds like the adapter might be some kind of low-end, off shore adapter, kinda slapped together?
Not accusing you of being cheap.

Oh in this instance yes I am cheap. The plow is a resurrected 7' rear blade I got for cheap as it was. However, I discussed with the dealer on plow options but with the hydraulics and what they had available it was going to be many thousands of dollars more to get one set up. We were already in to many thousands of dollars (about $11k) in front end equipment and hydraulics so I went the other way and adapted what we already had.

Interesting note - the SSQA to 3pt adapter from Ebay was in the lower $200's if I recall. I was browsing Everything Attachments and they want over $1000 for one. Crazy.

 

[Hay Dude]

Oh in this instance yes I am cheap. The plow is a resurrected 7' rear blade I got for cheap as it was. However, I discussed with the dealer on plow options but with the hydraulics and what they had available it was going to be many thousands of dollars more to get one set up. We were already in to many thousands of dollars (about $11k) in front end equipment and hydraulics so I went the other way and adapted what we already had.

Interesting note - the SSQA to 3pt adapter from Ebay was in the lower $200's if I recall. I was browsing Everything Attachments and they want over $1000 for one. Crazy.

Yeah, but that’s what it costs for quality American or Canadian attachments.
Here was mine. Converts Euro/Global to SSQA.
I don’t mind paying a price for quality, but USA/CD made stuff is now commonly 3 times the price of crap.
The last SSQA I had was my snowplow, I have sold that one.

 

[R Barger]

I was swapping front end equipment this afternoon so I did some measuring. Aside from being still pretty cold (temp in the teens) we had a nice day here.

First up is my fork set.
View attachment 4995657

This measures about 45-1/8". This is a Land Pride fork set.

Next is the bucket.

View attachment 4995658

This measures about 45-1/16".

Next is the grapple. This one I had trouble getting the tape to cooperare for the measurement.

View attachment 4995660

This comes out to about 45-1/2".

Next is the loader arms on the tractor that mate to the SSQA receivers on the implements.

View attachment 4995661

This measures about 44-5/8". See more detail below regarding this number and the associated clearance.

Next is the SSQA to 3pt adapter we have.

View attachment 4995662

This measures right about 44-1/2".

When I try to hook up to this adapter this is the result:
View attachment 4995665

Left side -
View attachment 4995663

Right side -
View attachment 4995664

So for now what I do is squeeze the loader with a large bar clamp:

View attachment 4995666

That gives me just enough "squeeze" to clear the adapter and connect:

View attachment 4995667

Needless to say, the clamp method on the loader like this is a pain in the butt. But it works.

When the weather warms Ill cut the sides of the adapter pate and lay more metal over that to open up another 1/4" on each side (1/2" total).

My gut tells me much less than 3/8" clearance total would make mating the loader arms unnecessarily difficult.

I bought the same exact adapter from Ebay and have had no problems connecting it. I'm going to measure mine and compare,

 

[shooterdon]

I got the adapter from eBay and it works fine. People might think I am foolish for buying CCC (Cheap Chinese Crap), I think they are foolish for spending four times more for American steel.

 

[Hay Dude]

I got the adapter from eBay and it works fine. People might think I am foolish for buying CCC (Cheap Chinese Crap), I think they are foolish for spending four times more for American steel.

Then call me a fool, but I can’t deal with stuff made that cheaply. I also am doing more commercial usage than the average TBN’er
My Ebay CCC adapter was actually about $500. It was an Euro to SSQA adapter though and they cost more than the OP’s adapter.
American made was $1,150. So it was a little more than double the price.
I had to learn that lesson the hard way.
The US made fit perfect, the handles didn’t have sharp edges to cut your hands, and the springs actually held the handles in the up position when releasing.

Well worth it, IMO.
China sucks lol
Buy once, cry once, etc.

Those are my excuses. YMMV.

 

[shooterdon]

Then call me a fool, but I can’t deal with stuff made that cheaply.
My Ebay CCC adapter was actually about $500. It was an Euro to SSQA adapter though and they cost more than the OP’s adapter.
American made was $1,150. So it was a little more than double the price.
I had to learn that lesson the hard way.
The US made fit perfect, the handles didn’t have sharp edges to cut your hands, and the springs actually held the handles in the up position when releasing.

Well worth it, IMO.
China sucks lol
Buy once, cry once, etc.

Those are my excuses. YMMV.

Well, we are comparing apples to coconuts:

The adapter for SSQA to 3 PH does not have handles (a minor issue anyway as sharp edges are solved with 20 minutes of grinder work or a file) or springs (that could be upgraded for $50 or less). I don't expect the same build quality on something that is 1/2 the price of the "good stuff". But I am not a contractor.

I cannot justify spending the premium, so I either do without or buy the CCC. And I cannot take a tax write off on most of the stuff I buy. I have to play with my own money.

I bought a CCC SSQA plate for a custom attachment I designed for lifting bulk bads of wood. I paid $110 or it delivered. When I took it to the shop the owner of the shop criticized some of the welds but was honest enough to admit it was a steal. He said he could not have bought the steel at that price. He beefed up the welds at minimal cost and I have lifted over 2000 pounds with it multiple times without problems.