Sears Welder
- Thread starter tomplum
- Start date
- Views: 3507
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 6,874
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
I really like that Craftsman, but then I have a soft spot for older Made in USA and Canada transformer welders.
Quite the collection!
PILOON
Super Star Member
Weld much?
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 6,874
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
Industrial Toys
Super Star Member
- Joined
- Feb 25, 2008
- Messages
- 16,742
- Location
- Ontario Canada
- Tractor
- Kubota R510 Wheel Loader + Cab and backhoe, JD 6200 Open Station, Cushman 6150, 4x4, ten foot 56 hp Kubota diesel hydraulic wing mower, Steiner 430 Diesel Max, Kawasaki Diesel Mule, JD 4x2 Electric Gator
Those welders are quite a sight.
I thought I bought some heavy 12 foot racking beams. How deep are those and what are they rated for?
I thought I bought some heavy 12 foot racking beams. How deep are those and what are they rated for?
Industrial Toys
Super Star Member
- Joined
- Feb 25, 2008
- Messages
- 16,742
- Location
- Ontario Canada
- Tractor
- Kubota R510 Wheel Loader + Cab and backhoe, JD 6200 Open Station, Cushman 6150, 4x4, ten foot 56 hp Kubota diesel hydraulic wing mower, Steiner 430 Diesel Max, Kawasaki Diesel Mule, JD 4x2 Electric Gator
Those welders are quite a sight. You just need a steel table in the middle and sub yourself out to the CIA for an interrogation facility. Just seeing those, would make someone start talking! lol
I thought I bought some heavy 12 foot racking beams. How deep are those and what are they rated for?
I thought I bought some heavy 12 foot racking beams. How deep are those and what are they rated for?
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 6,874
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
Maybe something like this, with a chair?
The pallet racking is 42” deep. I can’t recall the load rating on those. I would normally ask Rick my retired pallet rack guy when he drops by for coffee but sadly he’s dealing with chemo issues at the moment.
Industrial Toys
Super Star Member
- Joined
- Feb 25, 2008
- Messages
- 16,742
- Location
- Ontario Canada
- Tractor
- Kubota R510 Wheel Loader + Cab and backhoe, JD 6200 Open Station, Cushman 6150, 4x4, ten foot 56 hp Kubota diesel hydraulic wing mower, Steiner 430 Diesel Max, Kawasaki Diesel Mule, JD 4x2 Electric Gator
I just switched from 36" to 42" racking, not knowing that I had 36" and 42" works better for my driveshed. But I was reffering to the height and rating of the beams?
The tough customers might work themselves right up to the BIG motor driven welder!
You could also forgo the welders and just have a wicker chair.
The tough customers might work themselves right up to the BIG motor driven welder!
You could also forgo the welders and just have a wicker chair.
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 6,874
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
The stepped load beams are a little under 6” tall and 2.75 in wide.
The manufacturer is North American Steel and I’m uncertain of the load rating for a beam with those dimensions for a 12 foot span.
The manufacturer is North American Steel and I’m uncertain of the load rating for a beam with those dimensions for a 12 foot span.
