Sd1540 B 3 point problems

   / Sd1540 B 3 point problems #1  

Neil1982

New member
Joined
May 24, 2022
Messages
11
Tractor
2008 Massey Ferguson GC2310
My 3 point will only lift when cold and at that it will lift and then drop with weight on it. I have replaced the piston O rings and the problem still persisted.
Any ideas what else it could be?

I have a loader on it and it works perfectly.
 
   / Sd1540 B 3 point problems #2  
My 3 point will only lift when cold and at that it will lift and then drop with weight on it. I have replaced the piston O rings and the problem still persisted.
Any ideas what else it could be?

I have a loader on it and it works perfectly.
Did you check out your other thread posting. I provided the manuals. :)


Bet there are other o-rings in the system to check. And it may be a diverter valve being stuck too.
 
   / Sd1540 B 3 point problems
  • Thread Starter
#3  
So I have replaced the O rings on the piston, honed the cylinder, replaced all O rings in the control valve, flushed all the hydro fluid and put a new screen in and I am still having the issue where it won’t lift. Any one have a suggestion as to what else it could be? Again front loader works perfect.
 
   / Sd1540 B 3 point problems #4  
So I have replaced the O rings on the piston, honed the cylinder, replaced all O rings in the control valve, flushed all the hydro fluid and put a new screen in and I am still having the issue where it won’t lift. Any one have a suggestion as to what else it could be? Again front loader works perfect.
Old post but I’ve been having the same issue. Did you ever figure out what it was?
 
   / Sd1540 B 3 point problems #5  
I just acquired a 1980 shibaura sd1500b, 3 point lift picks up good at first start,, but will ease back down (grader box 4ft), hotter gets the worse it gets. I am totally new to tractor, all decals and such are worn off, no book on it, I dont even iknow how or where to check hydraulic fluid, what type it takes or anything ! Need some good help ! Thanks
 
   / Sd1540 B 3 point problems #6  
Use a universal hydraulic /transmission fluid. First thing to check is lift cylinder orings. I can supply parts & manuals.
 

Tractor & Equipment Auctions

Caterpillar 420F2 IT (A53314)
Caterpillar 420F2...
Motorhome (A55853)
Motorhome (A55853)
KUBOTA X1140 CREW RTV (A52706)
KUBOTA X1140 CREW...
2015 Ford F-550 4x4 Knapheide Service Truck (A51692)
2015 Ford F-550...
2004 Sterling Acterra Cab and Chassis S/A Truck (A55852)
2004 Sterling...
2014 Chevrolet Express Cargo Van (A55852)
2014 Chevrolet...
 
Top