Quick-Tatch disassembly help

[rtm038]

Hey all,
I need to remove the pivot/push beam (#30) from the A-frame (#27) on a front Quick-Tatch set-up. So far I've removed the main pivot bolt (#33 below), but can't get the bushing (#32) out. Does anyone know how to get this bushing out?

Thanks
Ryan

 

[kennyd]

No clue on that one! Is it damaged?

 

[rtm038]

Figured it out. I needed to hit the backside of the push beam with a mallet a few times to get it slide off the A-frame.

Ryan

 

[jimgerken]

Are you rebuilding it to tighten it up a bit? Mine's sure sloppy and that thought has crossed my mind.

 

[bronzebeetle]

With the bolt removed and item 27 is separated from item 30 you should be able to drive out the bushing or preferably, press it out with a hydraulic press.

 

[kennyd]

With the bolt removed and item 27 is separated from item 30 you should be able to drive out the bushing or preferably, press it out with a hydraulic press.

That was 9 years ago...hope he fixed it by now LOL.

 

[rtm038]

Yeah I got it fixed.......a long time ago LOL

 

[bronzebeetle]

Yeah I got it fixed.......a long time ago LOL

OOP's my bad. Gotta pay more attention to posting dates from now on.