I have a JD 355D that is overheating. I had a coolant leak, and I changed the hoses and coolant. The tractor started overheating and I changed the thermostat. There are no leaks from the water pump, but I still have the leak near the reservoir. It only happens when it overheats. I noticed that one side of the radiator is very hot, and the other side is much cooler. Any suggestions?
John Deere 355D Overheating
- Thread starter craigst
- Start date
- Views: 4328
Samuellm
Member
Blocked radiator pull it and back flush it.
jenkinsph
Super Star Member
f flushing doesn't solve the problem you may need to have it reworked at a radiator shop. The last time I had to rod out a radiator was on my 450 Deere dozer and did the job myself. If you don't have a lot of soldering experience this best left to others.
boggen
Elite Member
- Joined
- Feb 22, 2011
- Messages
- 3,789
- Location
- Trivoli, IL
- Tractor
- SSTT (Sideways Snake Tain Tractor) and STB (sideways train box) tractor, dirt harvester
sounds more like radiator plugging to me as well.
but to hit on it. make sure you have correct antifreeze / water ratio. you can pickup a cheap tester at most automotive stores
but to hit on it. make sure you have correct antifreeze / water ratio. you can pickup a cheap tester at most automotive stores
Jerry/MT
Elite Member
- Joined
- Feb 2, 2008
- Messages
- 3,141
- Location
- North Idaho-The Palouse
- Tractor
- New Holland TD95D, Ford 4610 & Kubota M4500
It's a cross flow radiator and it should be hotert at the top and cooler as you go to the bottom of the radiator where the out let to the water pump is. If it hotter on one side than the other than I agree it has internal blockage.
